ICloud and Photos app are not working anymore after updating iOS 8.0.2 !!!

I've just upgraded iOS 8.0.2 with .ipsw file. It asked for my iCloud password in Set Up. It says it's wrong. So i skipped it.
I tap iPhoto and it tells me to marge the photos to Photos app. It was going fine and then suddenly, it closed. Now i can't open the Photos app anymore. I've rebooted and deleted iPhoto app. I can't even open through Camera.
I can't see my profile in iCloud (in Settings). It's keeping me the password. Its still wrong. I can't even turn off Find My iPhone to restore my iPhone. It says verification failed.
I don't know what to do anymore. I still can use my iCloud on my Computer. I still can use everything and everywhere except on my iPhone.

You are not alone. I got that issue also. I always reboot my phone or reset the network setting but it only work for a few hours.

Similar Messages

  • All my GPS Apps are not working anymore after upgrading to OS4

    Hi folks,
    all my GPS APPS are not working anymore since I upgraded to OS4.
    I am living in Germany and using Iphone 3GS 32GB.
    Are there any plans from apple to resolve this issue shortly ß Or shuld we
    chance to google or Microsoft produkts....?

    I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
    I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
    What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
    We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

  • ICloud and Photos app are not showing full resolution photos

    Since migrating my iPhoto library to Photos, it has had problems showing the full resolution of photos. I initially had "Optimize Mac Storage" selected, but even when I had space available, it would not download the full resolution version of a photo. The loading circle in the bottom right corner would spin until it would be 'fully loaded' but the photo would not become the full resolution photo. I then checked "Download Originals to This Mac", but after it said it had downloaded the full sized versions of everything, the same problem occurred. I then went to iCloud and the iCloud Photos app and saw that some of my photos were displayed at about 1/3 the size on the screen. This wasn't just zoomed out. When I zoomed in closer the image did not resolve any better.
    HOWEVER, downloading the photo from iCloud and opening it in preview gave the full resolution photo. I have attached an image showing the different levels of resolution from os x Photos app, iCloud, and the downloaded image (shown in Preview). I used the zoom slider on Photos until it reached 100%, I set the view in Preview to "Actual Size", but in iCloud to get the same dimension image, I had to zoom to 200%+.
    Another thing that I noticed was that this doesn't happen to all of my photos:
    It definitely happens to all of my photos taken with a Fujifilm X-M1, where I shoot in RAW, adjust and process in Lightroom, then export JPEGs to iPhoto. These tend to be slightly smaller (largest side 2048 pixels).
    It doesn't happen to photos taken with 645Pro app (where I still export JPEGs to iPhoto with largest side 2048 pixels).
    It happens to some, but not all, photos taken with the iPhone's native camera app
    I am very confused. Also, even after having checked "Download Originals to this Mac" and letting it download everything, the Photo Library is only 3.77 GB. In iCloud it is ~10GB and my old iPhoto library was about ~15GB.

    I now discovered that I can't edit photos in the Photos app (presumably because Photos is not communicating well with iCloud and can't download the full resolution photo to edit).

  • After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

    Hi,
    I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
    First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
    So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
    As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
    Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
    Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
    I have no clue whats going on here because email and web is working fine.
    In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
    If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
    Is there anyone who could help me out here?
    Thanks,
    Daniel

    Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

  • Script does not work anymore after updating to FM 12.0.3

    Hi,
    With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
    Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
    Thanks!

    Hi again,
    For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that  added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

  • ICloud and Apple ID Are not working

    I cannot sign into my iCloud, the password email is broken and i forgot my security questions, so how can I fix this? Also my phone is locked into a full fresh start and need my Apple ID to start it up. help?

    Go to iCloud.com and sign in with your apple id.  Click the icons and verify you data.
    If you see the expected data, on you MacBook Pro, click the apple >> system preferences >> iCloud.  If you are signed in already, sign out.  Then, sign in with the same id you used on the website.  Check off the desired boxes and wait for the gears to stop spinning.  Check the apps and see if they updated.

  • TS3595 Can't view my app updates and many apps aren't working anymore after installing iOS7

    Anyone a suggestion how tonsolve this?

    HI,
    Maybe try it this way this is what I did with mine because I did not migrate and didn't know about that either.
    Photos application for Mac Instructions that might help!
    On your iPad,iPhone keep the iCloud on in settings for Photos.
    if you have not opened the New Photos application yet to have it transfer your photos from iPhoto let it Transfer the Pictures.
    once you have all the pictures from iPhoto to Photos then in Photos go to Preferences
    there is general and iCloud tab and go to the iCloud and only uncheck the iCloud button that will make it so it doesn't sync with your iPhone and iPad for Photos.
    Then in Photos go up to View and press show sidebar because with that view you can move your pictures easier to albums snd delete or move any pictures or make new albums
    For Duplicates if you have a big pile in a row and I mean not like every other picture of the same pictures on the keyboard Hold down the shift button. or the other way is to Hold down the Command buttom that is right by the space bar then on the trackpad or mouse click once on the picture you want to delete and do a bunch at a time then on the last picture of that pile either right click the picture and delete or go up to the edit button which is next to file on the top left and click delete in edit. 
    when you are all done with moving around your pictures or whatever go back to Preferences and turn on iCloud and make sure you have the optimize Mac Storage and then you are done! I hope this makes sense and works for you! here are the 2 pictures I'm talking about in settings.

  • My photo affects are not working on the new ios 7 I have an iPhone 4

    My iphone has recently been unpadated to the ios7 and I have not go panorama or any of the photo affects that are displayed in the right corner of the screen. Also my airdrop and control centre are grey not multi coloured help.?

    The Control Center is the grey panel the appears when you SWIPE UP from the bottom of the screen.
    Airdrop is now included in Control Panel.
    The Camera App has new settings at the bottom of the screen.  Tap on
    Video   Photo   Square   Pano (Panorama)

  • Isight is not working anymore after updating to snow leopard

    it used to work very well. i updated snow leopard 5 days ago. i try to use skype and photo booth, it is never working again. do people have the same problem?
    thank you for your information

    lightwright wrote:
    Thanks for the info - however surely this has something to do with the snow leopard software update - not a hardware failure or is that just a coincidence?
    My iSight was working fine before I upgraded to snow leopard? Is there a software fix coming?
    Welcome to Discussions, lightwright
    ... this has something to do with the snow leopard software update ...
    You may be correct that the problem has something to do with your SL update, but, as previously explained, many of us successfully use iSight every day after upgrading to Snow Leopard, so the problem is not SL itself. If you believe that your problem is with your update, you should consider reapplying the update using the method suggested above.
    If you continue to have iSight problems after properly applying the SL update, consider all relevant troubleshooting suggestions in http://support.apple.com/kb/HT2090
    However, if your iSight problem continues, and if iSight now does NOT show as a USB device in your Mac's System Profiler, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
    If, after properly applying the SL update and using the Troubleshooting suggestions, iSight IS recognized in System Profiler but still does NOT work with any of your video-enabled Apple software, your disk may contain some pre-SL software that is causing problems. Either erase the disk and apply only Apple software to see if that fixes your problem, or seek help from your Apple-Authorized Service Provider.
    ... Is there a software fix coming?
    ¶2.1.1 of Terms of Use for Apple Discussions prohibit us from speculating on unannounced products, including updates.
    EZ Jim
    MacBook Pro (13 inch, Mid 2009) 2.26GHz w/Mac OS X (10.6.1)  G5 DP 1.8GHz w/Mac OS X (10.5.8) 
    G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  LED Cinema Display  External iSight

  • My System Preferences, iCloud and Internet Accounts, are not working.

    They show blank screens no matter which account I login with. 
    I removed every Internet Account using Mail.  Even though the account details didn't show up the + - buttons did and the prompt let me know I had the correct account selected.  After removing all accounts I rebooted and this didn't fix the problem. 
    I have searched for a solution to this problem and have not found any that worked yet.
    Please help.
    Patrick

    I had the same frustrations, and then remembered similar problems with old stereo tuner technology.  It is called dust & corrosion; so I sprayed some electrical contact cleaner (available at some hardware or car supply stores) into the headphone port and the problem disappeared in about 2.5 seconds!  This is a more effective method to clean the micro-switch than pushing the headphone jack in and out, which could ultimately damage the switch anyway.

  • Apps are not being transferred after updating to new iOS

    I've read a few posts but nothing explicitly about this issue. I am the original account owner, same computer, iPod has worked with the same apps for over a year until I updated to the new iOS a few days ago.
    I recently updated my iPod Touch to the new iOS a few days ago; it transferred all my music, and everything else, except for my apps. I tried Store > Authorize this Computer on my desktop (which reminded me I'm still authorized, oh joy) as well as Settings > Store on my iPod. I'm not sure what I need to do next? Any suggestions would be greatly beneficial! Thanks!

    Before I updated to iOS 5.0.1, I was given 3 options "Download and Update", "Download", "Cancel" (or whatever). I chose to just download, without installing it, which would allow me to back-up all the data from my iPod to my desktop. I presume that path wasn't available if someone selected "Download and Update" immediately which informed me that it would erase all data without actually backing up before it installed. I'd have to assume at that point when your apps were re-installed after your update, it would still keep the previously saved sync data from the last time you plugged into your computer. I'm not sure if that was the case for you, but I never signed in to Game Center until now so I'm not sure how that works. This is also considering that iCloud was just introduced to mobile devices. Hope this helps :S, if not good luck! Cheers.

  • Canon LBP6200 Printer not working anymore after update to 10.6.7

    i dont know if this is to do with mac osx or canon's printer
    i try reinstall the driver but it just dont work
    obviously, apple need to work with canon to solve this problem
    hope for a update coming soon enough
    cannot live without my printer

    I bought a Canon LBP3100 three weeks ago. It was working fine until I updated to 10.6.7 this morning. I spent a good part of the day talking to Canon and Apple support. It is clear there is an issue with the driver under the latest operating system. Canon said they didn't even know there was an update out and hadn't a clue when a fix will be available. Apple advised me to reinstall 10.6.6 which I am reluctant to do. In the meantime I'm left without a useable printer in my office. So much for customer service. Something has gone badly wrong somewhere.

  • I upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3?

    i upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3? all my best and regular apps are not working and i need them! so how do i down grade

    There is no legitimate (Apple supported) way to downgrad an iOS on a device.  Have you tried downloading/installing a new (free) app.  That works for many users with that problem.

  • My email is changed on my apple id and now some apps do not work anymore incl icloud. What to do

    My email address changed so altered it in apple id. However now some apps do not work anymore. And my email there seems not changeable
    I.e appstore, icloud, search friends etc
    Thx for yr help

    Hi frisbo1312
    I am in the UK and eventually found the problem was due to my BT Home Hub Router.  Not sure where you live, but of you are in the UK, this might work for you.
    I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
    It worked for me.  If you can't link to the URL, here is the body of the text
    There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
    Here's how you can fix it.
    Using your internet browser, go to the address "192.168.1.254
    - Follow instructions to reset your password if asked.
    - Then go to "Settings", then "Advanced Settings" and "home network"
    You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
    Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
    Click on this name, chose another name without any special characters, like "macbook" for exemple.
    And then click on "apply"
    - restart your computer.
    That should fix the issue.
    Credit goes to vincentfromcork for providing me with the solution.
    Spread the word

  • HT4972 I am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

    am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

    iOS 4.2.1 is the latest version of iOS for the 3G.
    Facebook and Whatsapp both require 4.3 or higher.
    If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device.

Maybe you are looking for

  • Different execution times for back ground jobs - why?

    We have few jobs scheduled and each time they run, we see a different execution times. Some times, it increases and some times it decreases steeply . What could be the reasons? Note: 1. We have the same load of jobs on the system in all the cases. 2.

  • Fonts different between java 1.3.1_01 and 1.4.2_02

    I have upgraded to java 1.4.2_02 from 1.3.1_01 and most of my fonts now appear to be different. Do I really need to edit my application to make my fonts look like they did in the past or is there some sort of setting that will take care of this for m

  • Maximum lot size - create order manually

    Hi Experts, we are in the implementation phase of the project (PPDS) and need your help. For the products we have the data of Maximum Lot Size, that is a constrain for the process. But when we execute manual adjustments/creation of the planned orders

  • EJB Question Please help me

    Hi I am preparing for certification exam. I don't know the correct answer of these question. Please help me. Regards Arghya Banerjee ======================================================================== 1. While testing a BMP Entity Bean, a develo

  • ' + ' ve &  ' - ' ve quantity in copying control

    I tried to copy a quote (12 qty) to order(11 qty), but when I went back to the quote again, it still had the open qty remaining as 12. Steps done (All using standard): QT= 10 qty doc complete QT->OR 10 qty doc complete Check QT- 10 qty Which one is t