Icloud app does not load when I open outlook

I installed control panel & set it up for outlook. when I open outlook I have to manually start Icloud add in.  shows add in as inactive in "file"/ "options"/. I have uninstalled/re-installed icloud which hasn't made a difference.

That's exactly like saying, "Hey, try this.  It didn't work either.  Good luck!"
It's the high-percentage play with the particular symptom set being reported. High-percentage implies that it doesn't work for some people. (Otherwise it'd be a 100% play.) So, it still makes sense for people to try it, even if it doesn't work for some people, because it does work for most people. Check other posts by wiclee using that set of instructions to get a better feel for the reliability of the advice in these circumstances. (Granted, that's a bit tricky given that only about 10-20 percent of people report back to say whether or not any advice (on any given topic) actually works.)

Similar Messages

  • The iTunes store does not load when I open it

    So I recently had to install the latest version of iTunes after I upgraded to the newest version of iOS on my iPhone 4 (iOS 6.0.1) because the older iTunes version wasn't compatable with the newest iOS version. I had been using a much older version of iTunes becuase every time I would update the iTunes store without fail would stop working. I spent almost an entire day trying to fix it like 6-8 months ago and I finally got it to work with one of the older versions, which was why I was mad that I had to update it again.
    Anyways, the iTunes store will not load at all. Everytime I open up iTunes on my computer (I have Windows Vista) and I try to go to the iTunes store, it never loads. It keeps saying "Accessing iTunes Store" (see image). I have tried to wait it out, but nothing ever changes.
    I have already tried reinstalling iTunes and tried reinstalling the newest version, neither of which helped. I also tried what they suggested at http://support.apple.com/kb/TS4123 but the only item that came up under the Winsock Providers tab was the Apple one.
    Not sure what else to do. Any suggestions?

    That's exactly like saying, "Hey, try this.  It didn't work either.  Good luck!"
    It's the high-percentage play with the particular symptom set being reported. High-percentage implies that it doesn't work for some people. (Otherwise it'd be a 100% play.) So, it still makes sense for people to try it, even if it doesn't work for some people, because it does work for most people. Check other posts by wiclee using that set of instructions to get a better feel for the reliability of the advice in these circumstances. (Granted, that's a bit tricky given that only about 10-20 percent of people report back to say whether or not any advice (on any given topic) actually works.)

  • HT1399 Hi! The "chapter" menu does not appear when I open a book in itunes. How can I make it appear?

    Hi! The "chapter" menu does not appear when I open a book in itunes. How can I make it appear? In fact, one time it did appear, but it seems to have been more of an incident.

    Books are meant to be read on your Devices through iBook App and will not work on iTunes.

  • Hello, the "sign" feature does not show when i open a pdf document with reader (MAC)

    Hello, the "sign" feature does not show when i open a pdf document with reader (MAC)

    Hi mentane,
    Thank you for posting on the Adobe forums, what is the version of Adobe Reader you are working with.
    Open Adobe Reader>Adobe Reader>about Adobe Reader.
    Thanks,
    Vikrantt Singh

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • One of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

    one of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

    If you are a resident of the U.S, have iTunes 10.3, iOS 4.3.3, you can re download apps for free directly on the iPad.
    Tap the App Store icon, find the app: download
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Hey software does not respond when I open a new file or an existing file

    Hey software does not respond when I open a new file or an existing file

    Nobody can tell you anything without system info and other technical details.
    Mylenium

  • On updating to Yosemite Mail Index damaged but does not  repair when re-opening mail.

    Yosemite updated but Mail index damaged and does not repair when re-opened. How is this fixed?

    I have the same thing happening.  Everything else seems to be working fine, except i can't open my mac mail at all!  it seems to be in a loop and won't let me retrieve any mail or even try to send mail before migrating, but it fails and then its back to the beginning and the same loop continues, so no mac mail working.  I also came from 10.6.8 to 10.10
    jane

  • ITunes does not load when connecting iPod Nano (4th Gen)

    I have my iTunes settings 'disable automatic syncing for iphones and ipods' unchecked, and in my iPod settings i have 'open iTunes when connected' option checked, and iTunes still does not load. How do I solve this?

    If you have itunes open and then connect the nano, what happens?

  • Ecore diagram editor does not load when I click the (aird) file

    When I click on an aird file , which I created for the first time to graphically edit an ecore diagram, the diagram editor does not load, but instead, Eclipse opens the aird file as xml in a text editor! Why this is happening? and how can I solve this? any thoughts?
    I am using Eclipse 4.4.2. in mac.
    I updated the content, with the hope to get a reply.

    Hi, sorry for the lag.
    This might happen depending on the perspective you are using, please try with the "Modeling" perspective.
    You should be able to load the .aird using right-click=>open and then see the corresponding diagrams as childs of the .aird file.

  • Icloud application does not load

    I have been using two lap tops.. one running windows 7 and the other windows XP.
    Regularly I can not access my icloud account -
    1.  It does not load the application and
    2.  Unable to access the server
    I've looked at all the control panel settings and privacy settings.. but I find nothing. To add to the mystery is .. sometimes it loads just fine.
    I am in India and the internet is "wonky" to say the least. That is my default answer but it was so bad this morning that I had to submit the question to see if it is something else in the settings I need to change.
    Any insights out there??
    kleen

    I have the same problem. Clicking iCloud in the preference pane results in the follow:
    "Preferences Error could not load iCloud preference pane."
    I don't use iCloud, and would prefer to completely disable it. However now I am receiving a "log into iCloud" pop up every time I start my computer that is very annoying.
    See screenshots below. Please help.

  • The last tab, furthest to the right, does not load when restarting FireFox.

    Whenever I restart firefox, the last tab I had opened does not load. The matter of restarting can be any kind: new add on installed, new firefox update, restarting the browser manually, or restarting my computer so that firefox is automatically closed. It's always the same problem. The last tab will be displayed as my New Tab page, which is blank. I can have 3 tabs open, and the first 2 will load just fine, but the last doesn't. This means that if I restart for an add-on or something, I need to go back into my history to pull up this last tab, which is inconvenient. And it may not have been my most recent tab. I may open this last tab, go back to an earlier tab and surf the web on that, building my history, and then restart firefox for whatever reason. In those instances, I need to open up the history window and dig for that last tab from memory.

    Alright. It appears to be an addon called Load Tabs Progressively. I'll just leave that disabled.

  • Facebook link does not appear when i open icloud or mail pane on mountain lion

    When I open icloud or mail, contact & calendars in the systerm preferences, It doesnt have facebook there.
    I want facebook there so i can recieve notifications from the notification center, what should i do?

    Facebook is not available in Mountain Lion quite yet. It will be available in a software update in the Fall.

  • Forms applet does not load when request forwarded from custom servlet

    I have an existing forms app that I wish to call from a newly-developed servlet. The servlet determines which form to call and then forwards the request to the forms servlet using RequestDispatcher.forward().
    The request is forwarded correctly but when it is done all I see is a blank browser (IE7) window. When I View Source I see all the correct HTML code (from basejpi.htm) but it seems my browser does not attempt to load the forms applet. No messages are displayed in the Java Console. This is the same HTML that comes back if I run the forms app directly, e.g. click a link that goes straight to the forms servlet URL, only in that case the forms app starts up fine.
    Anyone know why this does not work?

    Figured out what is going on:
    In basejpi.htm there is "<SCRIPT LANGUAGE=JavaScript SRC=java/forms_ie.js>" that creates an OBJECT tag to load the forms applet. I believe since the context of my custom servlet is different than that of the forms servlet, forms_ie.js is not found when the request is forwarded from my servlet.
    One question answered raises another. There is also an OBJECT tag inside a NOSCRIPT tag for machines where scripting has been disabled:
    <!-- Forms applet definition (start) -->
    <NOSCRIPT>
    <OBJECT name=FormsApplet
    type="application/x-java-applet"
    ...>
    </NOSCRIPT>
    <SCRIPT LANGUAGE="JavaScript" SRC="java/forms_ie.js"></SCRIPT>
    My thinking is to remove the NOSCRIPT tag, and also the SCRIPT tag mentioned above, so all machines will simply see the OBJECT tag, like so:
    <!-- Forms applet definition (start) -->
    <OBJECT name=FormsApplet
    type="application/x-java-applet"
    ...>
    This makes me wonder why the SCRIPT option is there to begin with. Anyone see a downside to this approach?
    Kevin

  • QuickTime Content Does Not Load When Using Safari

    For the past week or so, I've noticed that when using Safari, any QuickTime content fails to display, but instead, the QuickTime logo is displayed with a question mark in the center. That would indicate to me that Safari is not seeing that QuickTime is installed, but of course, it is. I tried actually reinstalling QuickTime, but that did not resolve the issue.
    Again, this has only started in the last week or so. I'm new to the MAC world, so my troubleshooting skills are more limited with OSX. I also have Firefox installed, and QuickTime content opens as normal when using Firefox.
    Any help would be appreciated. Thanks.
    iMac (Intel)   Mac OS X (10.4.7)  

    I have had the same problem for some time now. As well as this problem, some QT movies load into QT but the sound does not play.
    This all started when I loaded various other players such as VLC to run Windows Media Player stuff before Flip 4 Mac became universal. I have tried dumping prefs, turning off plug ins and a dozen other things between QT and Safari, including resetting Safarai and losing all my log ins etc.
    Nothing runs on say www.youtube.com We just get the big Q with a question mark over it. The keynote address released yesterday does not play with sound.
    I suggest we all look back and list what we did/installed just before the problem started and then we can compare and look for a common element.
    As to checking "block pop ups" I never had that on to begin with.
    We need to see if the problem is in Safari or Quicktime - or both. There are too many variables at the moment to narrow down the problem.
    Our other iMac which is identical does NOT have the problem - because I didn't try to load any other software on to it.

Maybe you are looking for

  • How to make a slide show or edition including mpeg and other formats

    Hi, I am i bit puzzled by the use of iphoto/imovie/itunes. I have a Sony camera which generates jpg photos and mpg videos; besides, i have 3gp and mp4 videos from cell phones. Firstly, i imported all of them to iphoto. I used a automator workflow to

  • Windows 126 error 7

    I am not sure which discussion I saw the solution to the itunes error message Windows 126 Error - but they suggested removing ALL Apple items from PC, which I did, then installed Itunes...it worked.  I had spent a couple of hours before trying all so

  • Resized partition using Disk Utility and now Windows 7 will not boot

    Hi, Hopefully someone can help me!! I had previously used Boot Camp to install Windows 7. However, I later realised I had not given myself anywhere near enough disk space as I started using Windows for things I hadn't originally planned on using it f

  • How can I get apps on y iPhone 3

    How can I get apps on my iphone 3

  • Xorg 7 mod / nvidia / libgl-dri conflict

    I run the tesing repo of arch, and want to use xorg modular with nvidia. Although it runs with xf86-input-nv, I'ld like to run the nvidia driver - I think this is the best if you like to have 3D Acceleration, right? So, as many have mentioned before,