Icloud application does not load

I have been using two lap tops.. one running windows 7 and the other windows XP.
Regularly I can not access my icloud account -
1. It does not load the application and
2. Unable to access the server
I've looked at all the control panel settings and privacy settings.. but I find nothing. To add to the mystery is .. sometimes it loads just fine.
I am in India and the internet is "wonky" to say the least. That is my default answer but it was so bad this morning that I had to submit the question to see if it is something else in the settings I need to change.
Any insights out there??
kleen

I have the same problem. Clicking iCloud in the preference pane results in the follow:
"Preferences Error could not load iCloud preference pane."
I don't use iCloud, and would prefer to completely disable it. However now I am receiving a "log into iCloud" pop up every time I start my computer that is very annoying.
See screenshots below. Please help.

Similar Messages

Application does not load correctly when deploying to standalone server

All,
I have created simple application implementing fusion theme. Applicaiton works fine when I run on integrated server but when deployed on standalone server it does not load any images or the theme itself. afrloop keep incrementing in status bar and ends up with java script error while later.
I deployed another test application on standalone server and that works fine i.e. theme gets loaded correctly. Also, how should I include images on the page? I have a images folder in web content folder but they dont get loaded.
Any help will be appreciated.
Thanks,
Dipal

LabVIEW now uses the Microsoft installer. It's possible that you need to upgrade the version that's on the Win2K box. I think the latest service packs from Microsoft include it.

HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

Mail application does not work after upgrade to Mavericks.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

TS3988 icloud.exe does not load from the installer onto my windows 7 laptop

Installed the iCloudSetup from Apple. Installer said everything installed and finished. When I go to open iCloud, the laptop is looking for the iCloud.exe file and after a few minutes, it notifies me that it cannot find the original .exe file.
I am thinking of re-loading the installer file again and starting over.
Any other suggestions?
Thanks!!

There is an app you can download for xp, i havnt tried it because im not going to use icloud but if you go onto the ipad tab and then icloud there is a link on there.

Icloud app does not load when I open outlook

I installed control panel & set it up for outlook. when I open outlook I have to manually start Icloud add in. shows add in as inactive in "file"/ "options"/. I have uninstalled/re-installed icloud which hasn't made a difference.

That's exactly like saying, "Hey, try this. It didn't work either. Good luck!"
It's the high-percentage play with the particular symptom set being reported. High-percentage implies that it doesn't work for some people. (Otherwise it'd be a 100% play.) So, it still makes sense for people to try it, even if it doesn't work for some people, because it does work for most people. Check other posts by wiclee using that set of instructions to get a better feel for the reliability of the advice in these circumstances. (Granted, that's a bit tricky given that only about 10-20 percent of people report back to say whether or not any advice (on any given topic) actually works.)

Application does not load when the JNLP file URL is given

Hi,
I have created a JNLP file to load a swing based application and i'm trying to host it on a tomcat web server.
But when i type in the URL in the browser window, nothing happens. No errors shown.I'm not able to figure out where i have gone wrong. following are the steps i have followed:
1)Created a .jar file which contains all the class files required for the application to run
2)created another jar file containing the main class file which loads the application.
3)included these two jar files in the JNLP <resource> tag
4)placed the 2 jar files along with the jnlp file in the ROOT directory of the web server.
5)type in teh URL of the jnlp file which is supposed to start the appilcation.
please do let me know if i'v done anything wrong in the above steps..
TIA,...

Check if the href attribute in the html file is
referencing the jnlp file correctly or not.I'm not using any HTML file to access this jnlp... i'm directly giving the URL smthing like this--> http://localhost:8080/test/client.jnlp
where, client.jnlp is present in a directory called test under the ROOT directory of the tomcat/webapps.
i hope this is the way to do it!!! plz do correct me if i'm wrong...!!!
TIA...

Creative Cloud desktop application does not load properly under Windows 8.1

I'm having a very strange problem with the CC tool too.
When I open it I just see an empty box with a smaller dialog inside it showing the icon. It won't close and I can't interact with any of the windows. The only way to get rid of it is to kill it via task manager. I've tried the "rename opm.db file" hack and this makes the CC app ask for my Adobe credentials as though its going to work, but then ends up showing the same thing. I've attached a screengrab of what's happening. Windows 8.1 FWIW.

Branching this to a new discussion.
NPotter.UK please make sure you are using version 1.2.1.260 or later of the Creative Cloud desktop application. You can find more details at Creative Cloud desktop missing text | Windows 8.1 - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-missing-text.html.

Mail does not load current emails

mail application does not load current email. when i delete messages mail downloads olkder messages, not current or new.

If it doesn't download new mail, it is possible that you are not connected to the mail server. Try to check if you have internet connection on this phone.
Good luck.

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

Same issue here, previously did work perfectly

ICloud mail does not reconnect in Mail application on MacBook Pro after disconnecting and reconnecting iPhone or after sleep

iCloud mail does not reconnect in Mail on my MacBook Pro after sleep or after disconnecting and reconnecting my iPhone. This only happens when I use my iPhone as a 3G-modem and not when I am on Wi-Fi. The only solution seems to be to quit the Mail-application and restart it again. Then Mail reconnects to iCloud.

Hi horstp,
Given your description of the issue (works on other Macs), it may be worth trying to set up that account by itself in a new test user on the iMac to see if it can be isolated to a user-specific file. You may find the following article helpful:
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Regards,
- Brenden

Icloud add-in for outlook does not load

I have the sync working for calendar and contacts between icloud and Outlook-- but when I close Outlook, the icloud Add-in for Outlook does not load-- the icloud label does not appear on the ribbon at top of Outlook. I must go to File> Options> Add-ins> Manage Com Add-ins--- and manually check iCloud Addin to get it loaded. It will not load at start-up automatically as it should.

I struggled with this but found the answer. You need to set the LoadBehaviour property in the Registry to 2 (Load at Start Up).
Run RegEdit
Navigate to here [HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Apple.DAV.addin]
LoadBehaviour will probably be sitting at 0. Double click that to open, change it to 2 and you're done.
Open Outlook, the Add-in will probably still be inactive. MAke it active, close Outlook, open it again and it should work...

Application based on JMF does not load the complete Video

Hi folks!
I programmed a small application using the JMF. Among other things, this application should load an play video files. But it does not load big video files completly.
One of my video files (MJPG, 720x576, FrameRate=25.0, Length=999424 28 extra bytes) is 10 minutes long and is pretty huge. It takes 2,1 gigabyte disk space.
My application loads and plays only 5 minutes of this video. But the VLC media player, windows media player and other video player does play the complete video.
However, the JMStudio has the same problem.
Any ideas?
I'm looking forward to your replies!

It's taken quite a long time for me to get a resolution. I have a feeling each situation is unique. I tried many of the solutions offered both in this forum and in other ones found online, including Flashplayer forums.
It didn't make sense that I can view videos from virtually everywhere but I could not from Fox News and CBS. Something was in conflict but I couldn't figure out what.
It turns out I had an issue with Doubleclick.net. In Internet Options - Security - Trusted Sites - Sites is where you need to go. If you find this is a restricted site - remove it. In my case, it was not there but I added the following to my trusted sites - https://*.Doubleclick.net and low and behold all is well. I watched a number of Foxnews videos and I finally got to see CSI from CBS online.
How this happened I'm not sure but sometime ago, I had this crazy notion of opting out of advertising via AOL. A number of email accounts are through AOL and I suspect something got corrupted as a result.
I hope this can resolve this issue for some of you who have this problem but looking at internet options via your control panel appears to be the least aggravating area to start!

Image does not load in application

Hi:
I read about the following in a loading image tutorial:
"The getImage methods return immediately, without checking whether the image data exists. The actual loading of image data normally doesn't start until the first time the program tries to paint the image. "
Basically, I am using the
Image img = Toolkit.getDefaultToolkit().getImage(path);I've also overwritten the paintComponent()method
public void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(image, 0,0, myWidth, myHeight, this);
}Then, I included the above code in a JPanel, which is further included in a JInternalFrame. But somehow, the image just doesn't load, the tutorial says, the image does not load until the FIRST TIME PROGRAM PAINTS THE IMAGE. How do I make the program paint the image??
Thanx a lot

Check out ImageObserver, Component.prepareImage() and MediaTracker.

Firefox 33.1 does not load Adobe Flash Player 15.0.0.223

As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!

Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it.

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Icloud application does not load

Similar Messages

Maybe you are looking for