Icloud back up reminder will not turn off

My ipad is frozen.  When i turn it on I get the following:
icloud backup
This ipad hasn't been backedup in 2 weeks.  Backups happen when this ipad is plugged in, locked, andconnected to wi-fi
The OK button will not work.  I can not tun off the unit to restart and can not turn the ipap on either.
Any suggestions?

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the device restarts, so you will be able to use your device again

Similar Messages

  • The light on the back of my phone will not turn off, even when I turn the phone off. Help?

    The light on the back of my iphone 4s will not turn off. Even when I turn the phone off the light stays on.  Can someone help? I did notice that the camera on the back has a little bit of moisture. (I have 3 small kids).

    You will need to have the hold switch replaced.

  • HT1320 my ipod nano is stuck in the lock position, my  hold switch will not turn off even when I move it, I have restored it and it came back on in the hold position

    My ipod naaIno is stuck in the lock position, my hold switch will not turn off even when I move it.  I have tried restoring it and resetting it and it still comes back on in the hold/locked postion.  It will only play when placed on a docking station and then I cant scroll to pick songs, I can only go to next song using buttons on docking station.

    You will need to have the hold switch replaced.

  • Back light will not turn off

    The back light will not turn off automatically, it is set for 10 seconds but doesn't turn off at all. Thank You

    Reset the iPod Nano - iPod Nano 5th Gen. User Manual

  • I have an iPhone 4, the flash will not turn off.  What can i do?  Flash is already off on camera and i deleted the flashligth app.

    I have an iPhone 4, the flash will not turn off.  What can i do?  Flash is already off on camera and i deleted the flashligth app.

    Try Hard Reset -> Hold down these two buttons at the same time [Sleep/Wake & Home] the moment you see the Apple Logo 'release those buttons' allow device to reset
    If still no resolution -
    Restore
    [back up information either via iTunes or iCloud if no recent one has been done]
    Erase All Content an Settings - FIRST Set up As New - Test Camera Flash
    Works? Great! - restore back up
    [NOTE - if the flash does not respond again after restoring back up then sorry will have to Erase All Content and Settings Again and then the best part 'Set up As New and manually enter data/information']
    If the first time done and after setting up as new and still not resolved - then Id suggest call AppleCare Support or set an appointment up with an Apple Retail Store
    Best of luck

  • After recent updates, mute light will not turn off

    My computer downloaded a bunch of system updates last night, and now the mte light will not turn off.  It still functions properly (turning sound on/off), but the light stays on regardless.  I either have windows 8 or 8.1 not sure what's the difference.
    This question was solved.
    View Solution.

    I suggest using Windows system restore to roll back the updates, one at a a time to find the  one that caused it.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • IPod will not turn off using click wheel

    My 30G iPod won't turn off unless I put it in the universal dock and use the remote. It will not turn off using the click wheel. I've tried resetting the iPod, and also changed the "Settings" back to the factory default, and that didn't make any difference. Is anyone else having this problem?

    Welcome to Apple Discussions!
    Does the iPod sucessfully reset?
    Try resetting the iPod...
    Resetting iPod
    After it resets, wait about a minute. Now try turning it off.
    Also, try activating the sleep timer on the iPod. Does that turn it off? (Go to extras-->clock-->[select a clock]-->sleep)
    btabz

  • HP PSC 1500 printer all lights blinking and will not turn off.

    HP PSC 1500 printer all lights blinking and will not turn off. I had just put a print cartridge in and the problems started. All lights began blinking including the on/off. The on/off button would nor respond. (just kept blinking)
    I opened the printer door and the cartridges did not move back to the right so they could be examined.

    Hi mlbroad,
    I understand that you are having an issue with your printer, and certain lights are blinking. I have included the document 'Blinking Lights'. This document will take you through the different combination of lights that are blinking, as well as steps to provide a solution.
    If this does not resolve the issue, please let me know exactly what lights are blinking.
    Please let me know if this resolves your issue, thank you.
    I worked on behalf of HP

  • MSI z77A-G43 - After Shutdown - Fans will not turn off

    Just installed a new MSI Z77A-G43 Motherboard for my husband since his old motherboard died. The one thing I've noticed though is that the fans will not turn off after I do a shutdown and I'd have to do a manual shut down instead. Any ideas what could be happening? Also it will randomly restart when not shutdown completely with the fans still on.
    Here are the specs of the PC.
    MOBO: Z77A-G43
    Processor: Intel i5 - 2500k Quad Core
    Video Card: Geforce - GT 610
    Ram: 8 Gigs
    Hard Drive - 128gb ssd and 1.5 tb hdd
    It's really barebones since I'm trying to just get it to run then get it back to normal working order with the next pay check
    EDIT!!!!::
    Forgot OS is Window 7 Ultimate X64

    If you are sure that your CPU is seated properly and that the PWM fan connector is seated correctly, then you may want to test with another known working PSU. I am not saying that your PSU is faulty, but before exhanging the board, I would definitely test that as well.
    EDIT: Just a question, did you disconnect the power switch and the other front panel connectors of your case and started the PC by shorting the Power switch [pins 6 and 8 on JFP 1]with a screw driver tip ? The remote possibility exits that the cables may have been connected incorrectly or may have a short.

  • My ipod will not turn off please help???

    Everything works on my ipod, but it will not turn off. It will play and pause but not turn off.

    I too have had this problem. In fact it seems to be a fairly common problem, suggesting that it is an unaddressed bug.
    Here's what you can try:
    1. Reset your iPod by holding down the Menu and Select buttons simultaneously for 5-10 seconds. After your iPod reboots, see if it will turn off. If not:
    2. Restore your iPod using iPod Updater, which you can download from http://www.apple.com/ipod/download/ . Restoring your iPod will delete all songs, pictures etc and reload the iPod's operating system. If that doesn't fix it, you can:
    3. Try a work-around. Can you turn it off using the Sleep menu option? If you don't see that in the main iPod menu, go to Settings/Main Menu and turn on the Sleep menu option. This didn't work for me, but others have een able to turn their Nanos off this way.
    If none of these things work, your only option is to have Apple replace you iPod. You can do this by contacting Apple support, or by going to the Genius Bar at an Apple retail store.
    Several people (including me) have seen the not-turning-off problem in conjunction with the Nano frequently showing a message saying that firewire connections are not supported. In my case my Nano became unusable because the firewire message would pop up so often that I couldn't navigate through the menus to get it to play anything. I took my Nano to an Apple store and the Genius Bar guy replaced it on the spot. Unfortunately the replacement also doesn't work (headphone jack doesn't work so I can't hear any music) so I will have to go back again, but don't let my run of bad luck prevent you from getting a replacement.

  • HT4531 My 6th generation nano appears to have locked up.  The screen is on, but nothing happens, and Ipod will not turn off. hear a buzzing noise in headphones.  what can I do?

    My 6th generation nano apears to have locked up.  The screen is on, but Ipod does nothing.  The Ipod will not turn off, and a buzzing noise is heard through the headphones.  What can I do??

    Hello houseman06
    Check out the troubleshooting steps in the article below to get your iPad nano back up and running. Also check to make sure that the lock button is not on preventing it from being un responsive. 
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    -Norm G.

  • IPod will not turn off after being used as an external HD in Windows

    I have disabled the option to have Itunes open when I connect my Ipod and I turned off the iTunesHelper in msconfig. This allows me to use my Ipod as an external HD without interference by iTunes. I have found that since upgrading to Ipod firmware 1.1.1, after I disconnect my Ipod using the Safely Remove hardware option in Windows XP SP2 my iPod will not turn off. I just turn on the lock, and let sleep mode set in after 2 minutes.
    This only occurs if I connect the iPod as an external HD and does not occur when I connect the iPod with iTunes open to sync my music library. The problem started with firmware 1.1.1. Is anyone also having this issue, and if so, is there a known solution?

    If you are not past the 2 weeks return period you can just return it.. for sure the TC is not ideal when you want something to store files.. the fundamental issue is lack of backup. The TC cannot back itself up. Nor can Time Machine in the computer backup network drives.
    To mount the TC disk in finder.
    Use Go, Connect to server. in the top menu.
    Type in AFP://TCname.local or TCIPaddress. (where TCname.local is the correct network name of the TC.. ie not its name as typed in, if it includes spaces and illegal characters like apostrophe. You need to find the actual network name from network utility netstat scan or better still use proper naming on the TC.
    Local is the default domain and helps.
    If the TC is in router mode the IP is static and is better used than the name.
    AFP://10.0.1.1 for example with default IP is far superior way to identify a network resource.
    The disk password will be requested. Add it to your keychain.
    It is better to load files to a DMG or sparsebundle.. See Pondini for info.
    Q3 http://pondini.org/TM/Time_Capsule.html

  • The light on my iPhone will not turn off

    The light onmy iphone will not turn off.

    do a quick reset by holding your sync and home button for 10 seconds it should turn off the led light.... if not completely restore your iphone and back it up it should turn off by doing 1 of these 2 steps

  • LED light will not turn off

    All of a sudden my red LED light is not turning off now. I have no new messages and it will not turn off. I shut my BB off and then it goes away, but comes back and stays on once I have a message. Anything I can do?

    Hi and welcome to the forums!
    Take a look at this link and see if it helps: http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=56409&query.id=127286...
    Let us know.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

Maybe you are looking for

  • Problems with ö, ü, ä when using download script in apex

    My Problem is that the procedure which is described here http://download.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm#CJAHDJDA returns for file nöx.txt -> nöx.txt if i change the coding from UTF8 to "westeuropean (Windows)" the

  • Time machine deletes old backups with new system drive

    So I decided it was time to get a larger system drive. After I finished migrating to the new drive, I plugged in my Time Machine backup drive, and now it's deleting all my old backups! What gives? Shouldn't Time Machine keep doing incremental backups

  • Rep-1925: Invalid Font File

    Hi, I'm running Reports9i and playing with the new font sub-setting feature. I have added the following line to my uifont.ali file under the [ PDF:SUBSET ] section: sAdC128c = "SADC128C.ttf" I have placed the above ttf file in a directory that is in

  • Firefox crashed and will not restart (get "Crash Reporter only), what do I do?

    When attempting to launch Firefox I get this Crash Reporter prompt (http://i494.photobucket.com/albums/rr307/rgf/MozillaCrashReporter.jpg). Clicking "Restart Firefox" does not work. I tried downloading Firefox again but it did not resolve the problem

  • Sum and average of a list of integers

    heya all im trying Implement a program to find the sum and average of a list of integers terminated by the data marker -999. import java.util.*; public class sumaverage    public static void main(String[] args) int sum = 0;     // input the first num