ICloud details not currently available
Have anyone else received a message that iCloud details are not available recently? My Photo Stream is not working correctly, those are to display both in the camera roll on the device that took the image and in the Photo Stream, right?
It startet a week ago when I apparently had taken too many images for iCloud to store, so I synced the photos, deleted them from the iPhone, deleted the backup and startet over again but now details are not currently available. It seems to be a server problem, but I have my doubts..
Chris Ropeta wrote:
After purchasing my new iPad air I cannot connect to icloud. Any ideas?.
For what purpose? Are you trying to backup?
Similar Messages
-
HP Printer Driver not currently available from Software Update server
I have an iMac (early 2009) and an HP OfficeJet 6100 Series printer. I just upgraded my Apple Extreme Base Station and when I try to add the printer again thru the new Base Station the iMac says the software is available from the Apple Server but after searching it returns the following message: "Can't install the software for the Hewlett-Packard OfficeJet 6100 Series because it is not currently available from the Software Update server." This has been going on for days. I have the driver installed already from having the printer connected via USB and via my old Base Station but cannot "see" the printer on my new Base Station without adding it again.
Any suggestions?
Thanks,
DrewHi Drew, see if this helps...
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03404580 &lang=en&cc=us&taskId=120&contentType=SupportFAQ&prodSeriesId=79476&prodTypeId=1 8972
Wired (Ethernet) or wireless network connection
Click the Apple menu ( ), and then click Software Update . Software Update checks for available updates and updates the database that your computer uses to determine available printer software.
Click Show Details , select any available software updates, and then click Install .
NOTE:
Install all available software updates for best printer performance and functionality.
Turn on the printer, and then make sure that it has paper in the tray and that it is in a ready state.
Make sure that the printer is connected to the wired or wireless network, or is connected to the USB port of a Time Capsule or AirPort Base Station.
Click the Apple menu, and then click System Preferences .
Click Print & Scan , and then click the plus sign ( ) in the lower left corner of the window.
Under Nearby Printers , click the name of your printer.
NOTE:
If your printer is not listed, click Add Printer or Scannerfor a full list of printers.
Under Name , click the name of your printer.
NOTE:
Make sure that the printer kind is Bonjour or Bonjour Multifunction .
Click the Use box, and then select the name of your printer in the pop-up menu.
Click Add to add the printer to the queue.
If you are prompted to install any additional software for your printer, click Install , and then follow the instructions to complete the installation.
NOTE:
Quit and restart any applications that were open before adding the printer to use the updated HP software features. -
ICloud is not longer available for your AppleID
Hello,
When i try to login into icloud.com i get the message: "iCloud is not longer available for your AppleID". What is the problem?
Kinds Regards,
CoskunHi coskun1990,
Thanks for visiting Apple Support Communities.
If you're not able to sign in to iCloud.com, these steps may help:
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
If you have trouble signing in to iCloud.com, try the following:
When typing your password, make sure the Caps Lock key isn’t on (passwords are case-sensitive).
Make sure you’re typing the Apple ID email address and password that you used to create your iCloud account. For example, [email protected] or [email protected]
If you set up your iCloud account to require two-step verification, make sure you correctly enter the latest code sent to your device.
If you can’t remember your password, or you see a message that your account has been disabled for security reasons (which might happen if someone tried and failed to sign in multiple times), you need to change or reset your password.
If you're still not able to sign in after trying these steps, you may need to contact iCloud support, as mentioned in this article:
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
Regards,
Jeremy -
no comment
When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help? -
A error message pops up when I try to click top singles "see all" saying "Your request could not be completed the item you've requested is not currently available in the US store" when a few minutes ago it allowed me to do so.
When I open the store in general (from my PC - Windows Vista), I get a message saying "Your request could not be completed. The item you've requested is not currently available in the Canadian Store."
On my iPad, Apps opens, but I can't browse new apps listings, but not their details.
Help? -
Biller Direct Error "We regret the service is not currently available"
Hi,
We have installed Biller Direct software (604 SP10) on our Java server (701 SP8) and it is connected to R/3 backend system (702 SP5). After Biller Direct software installation, we ran the following steps
1. Login to biller direct url
2. Leave blank in all fields (Customer No, Name and City) then click Find Customer
3. It lists few customers list, then when we click any of description for CustomerNo it displayed the following error.
"We regret the service is not currently available. Please try again later."
In the default traces we have seen the following error details:
#1.#1E99367F6302001B00000000000DF0D20004B38BAD09A298#1323312391758#com.sap.fin.webbase.framework.RequestProcessor#sap.com/fscm~bd#com.sap.fin.webbase.framework.RequestProcessor.processRequest#USER1#10588##n/a##775189f4214611e193e400000053dbc6#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###No screen-name mapped! path= ;result=#2#/startEBPP#customerSearch#
Could some one please advise what could be issue? Please let me know how to fix the issue, if you already went through the above error.
Thanks in advance.
Regads
SriHi Sri
Please logoff the system and restart the system again and then check.Also check what is the CRM package that you are using.Check wheather CRM 4.0 60.2.3 package is there or not.
The following tables should be configured,or you will get this sort of errors.This configuration should be done in the backend by FI
-> BCONTCD
-> BCONTT
-> BCONTA
-> TFKEBP
Regards
Srinaath -
The command "Invert" is not currently available
Although a long time PS veteran, (currently CS5), for some reason I just never really got into the actions. Well a few days ago I learned a technique for making pencil drawings from photos and I surprised that I actually liked the results. Since a client wanted me to do this to many images, I thought it would be foolish not to create an action for it so I did so but every time I try to run the action, about half way through, I get the following message.....The command "Invert" is not currently available.
I've already done some searching about this problem and have already done the following suggestions:
1. Check color mode of image
2. Make sure "add mask by default is checked in the adjustment layers settings
3. Make sure "add default masks on fill layer is checked in the layers panel options
These are all fine. Any other ideas for this "Actions" newbie?
THANKS!"It looks like you did not get back to the Black and White layer and duplicate it and name it details for details is a smart object layer not a normal layer like black and white layer."
This ended up being the key.
So I actually DID go back and start from scratch, since it's not all that long of a technique. We all learn in different ways I guess. As I made each step, I watched to see what was happening in the action that was being recorded. I'm not exactly sure why but something dawned on me to experiment with and as it turned out, it was the right experiement!
Here was the problem, when I was doing the step, "Go back to other B&W layer, duplicate it and name it detail", I duplicated the layer the exact same way that I have a million times before and that was to right click on the layer, which AUTOMATICALLY selects the layer and gives me the option to duplicate it and then I duplicated it and moved it.
WELL, as far as actually accomplishing that particular task, it works perfectly fine, as it should, BUT that's NOT how the action WANTED me to accomplish that particular task. It WANTED me to SELECT the B&W layer FIRST by actually clicking on it and THEN right click on it and duplicate it. When an ONLY when I took the extra step to select the layer first BEFORE right clicking and duplicating the layer was the action recorded in a way that worked when using it later.
I am SO glad that I figured this out with your help. I guess I'll have to study up on all of your links. I guess the action wants you to perform certain steps in a partciular way or it gets tempermental.
Thank you VERY much for sharing your time and expertise on this matter and setting me down the right path to figure this out. Very kind of you! Thanks for your patience.
Randy -
I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner? -
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!Sean L. wrote:
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!
The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
Printer on, and if networked, use a static IP address
Print & Scan
IP
Provide printer static IP address
Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
Add
Configure Driver under Options and Supplies
I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
Hopefully, you have already sorted this out. -
Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit
Download the Brother Mountain Lion drivers here.
-
I just subscribed to Adobe Acrobat Standard from the cloud. I am running microsoft Vista and Google Chrome browser. I get the error message Adobe Acrobat is not currently available for your language or platform. For a list of supported platforms and languages: and I believe I meet the Vista requirements. How do I resolve this issue?
LorettaKallen are you trying to install Adobe Acrobat Standard 11 utilizing the Adobe Application Manager? Do you receive the same error message if you use Internet Explorer or Firefox?
-
I upgraded my Macbook Pro (early 2011) to OS X Yosemite 10.10.3. Now, I cannot open iPhoto. It says I have to download older version of iPhoto. When I go to the app store, it says: The version of iPhoto installed on this Mac is not compatible with OS X Yosemite. Download the latest version for free from the Mac App Store. the it says: "The item you've requested is not currently available in the U.S.Do I need to find my original Macbook disk and install it back and go from there? Did I loose all my pics? Do I really ned it if they are all visible from the new "Photos" App? HELP!
Try Terence's instructions here Is Iphoto gone ? i want it back!
Pete -
Not sure why I am getting this message anyway. I wasn't trying to buy anything. I just upgraded and then I tried to access the store. I had two purchases that I had previously made from a different computer. I was going to download them to this computer as my iPod is synced to this computer and you can only sync it to one computer. I was able to view my account information and from there I was able to click on the Purchased link. I saw the two items and downloaded them. But I received an error about the second album. It said that I didn't have sufficient privileges. When I checked all the songs had downloaded. Only the booklet was missing. Maybe this has something to do with the issue, I don't know. As far as I know, I purchased everything from the US store. I don't even know how to switch to a different store.
In any case, I can't access the store because the item I requested is not currently available in the US store. So why don't they just dump me at the home page instead of blocking me completely.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
Hi All,
Whenever i try to open the App Store/iTunes store on the iphone, i get the error "the item you've requested is not currently available in the indian store".
This happens whenever there is link for an App that i want to download and it happens for each and every app which is easily available on iTunes from PC. I dnt know what the problem is because of my friends who has an iPhone is able to access it, so its even more weird.The only difference is that she has an legally unlocked iPhone and i have the "other one". Please help...because it is very frustrating to everytime go on to the PC to download an App.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
How can I get the Ask Me widget in Captivate 5 to use Outlook Express?
I want to use the Ask Me widget, but I have a customer that doesn't have Microsoft Outlook for their employees. They use Outlook Express as their email client. I have asked them to open Outlook Express when they are in the CBT and click the Ask Me bu
-
Deploy EAR failure,Who can help me to deploy?
Dear all: I'm running two cluster set-ups in the WLS6.1 , follow introduction my test condition: Two members on NT server and an Admin server, they reside all different Machine. I test it before packa
-
Camera raw editing not enabled CS5
I am running windows 7 32bit' PS CS5 and when i open bridge and try to open ACR it gives me that stupid error: Camera Raw editing not enabled....etc.. tried Like every solution. nothing working!! HELP!!
-
How can I integrate the IE in a swing applicaton
Hi all! At the moment I´m trying to integrate the Internet Explorer in a Swing Application. Can anyone give me an documentation or an example, how I must call the generated java classes (com2java.exe) from a swing application. thank you all Christian
-
Hi, We are having GSR-12010 router in our n/w.Problm is that everytime any ospf link is going down we ae geting the error message listed below: LC/0/2/CPU0:Jan 20 07:57:32 : ifmgr[164]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface POS0/