ICloud does not locate my macbook, any ideas?
i have registered both my iphone and macbook and they both show in the "find my iphone" and it will located my iphone, but says unable to locate my macbook.
Fine, but if wifi is off or not connected, then it won't work. That's always one thing to check.
Another issue is when routers are not registered with their location. Home routers occassionally have this problem (usually the ISP doesn't provide the "web" (where locations are stored in a database) with the data). One test is to try locating your device when connected to a public wifi service (a coffee shop, etc.).
Similar Messages
-
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?
Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939 -
I have had FPCX since Sept, first used Oct. I have not had one 'movie' export properly, first time since using FPCX. Audio stops completely at some point and does not re-start. Any ideas, folks?
First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
You could also list any relevant error messages you encounter.
What version of FCP X are you using?
All these things will make it easier for people to help you.
Andy -
My onscreen remote for sling player on my I-Pad does not respond correctly. Any ideas?
My onscreen remote for sling player on my I-Pad does not respond correctly. Any ideas?
Do you have access to an Apple Store? If so, make an appointment at the genius bar and show them the problem and maybe ask them to run a hardware test. Since you just reinstalled the OS, that should rule out a software issue.
It can be hard to troubleshoot over the phone. It may be easier to find the problem if someone can look at your Mac in person and see what it is doing.
Good luck! -
My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards languages the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?
The keyboard doesn't normally play any role in Apple apps regarding spellcheck. That is determined by system prefs/keyboard/text/spelling. Go the setup item at the bottom of the list and make sure that British English and Spanish are the only two boxes checked, and then set it to Automatic. How well it works varies a lot. You may also need to check Edit > Spelling and Grammar > Show Spelling and Grammar.
If you are still using Pages 4, spellcheck is determined by Inspector > Text > More > Language. Make sure that is set to the right thing for what you want to do. -
Windows 7 (32) itunes 8.0.2 does not recognise ipod touch - any ideas?
trying windows 7 beta, upgrading from vista, most things work fine but when I plug my ipod in itunes does not see it any more. Windows 7 just shows it as an unspecified device, not browsable or anything. Tried re-installing itunes, re-booting etc, doesnt make any difference - my music library etc is still OK, it just doesnt see my ipod touch. Does anyone have any ideas on this please? Thanks.
http://support.apple.com/kb/TS1567
-
cannot synch my ipod classic. when i try to i get a message saying "file folder cannot be found" or ipod is not recognized. Anybody have any ideas or fixes for this?
Mine is doing the same thing, I have been seeing it happen to a lot of people lately. Maybe it's the company sent out a bug to crash old Ipod, so we would have to buy new ones.
-
Mac does not switch off. Any idea how to fix this?
I already repaired the rights on the disk....
Mac does not drive down, obviously after certain programs have been started. One of those programs is itunes. I have to use the power switch button for switching it off. Mac can be driven down normally immediately after start-up.....Any idea what to do?Yes, this was exactly the sequence and again it worked...
Here is the result of the ps ax command:
Last login: Fri May 25 09:22:33 on console
mbp081:~ web$ ps ax
PID TT STAT TIME COMMAND
1 ?? Ss 0:01.98 /sbin/launchd
9 ?? Ss 0:07.96 /usr/libexec/kextd
10 ?? Ss 0:03.20 /usr/sbin/DirectoryService
11 ?? Ss 0:00.11 /usr/sbin/notifyd
12 ?? Ss 0:00.11 /usr/sbin/syslogd
13 ?? Ss 0:02.17 /usr/libexec/configd
14 ?? Ss 0:00.08 /usr/sbin/distnoted
15 ?? Ss 0:00.84 /usr/sbin/blued
16 ?? Ss 0:00.10 /usr/sbin/diskarbitrationd
19 ?? Ss 0:00.41 /usr/sbin/mDNSResponder -launchd
22 ?? Ss 0:01.90 /System/Library/CoreServices/coreservicesd
25 ?? Ss 0:00.20 /usr/sbin/securityd -i
32 ?? Ss 0:00.07 /usr/sbin/ntpd -c /private/etc/ntp-restrict.conf -n -g -p /var/run/ntpd.pid -f /var/db/ntp.drift
33 ?? Ss 0:00.12 /usr/sbin/cupsd -l
34 ?? Ss 0:00.37 /usr/sbin/krb5kdc -n
35 ?? Ss 0:00.01 /usr/sbin/cron
38 ?? Ss 0:00.08 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/Resources/u sbmuxd -launchd
39 ?? Ss 0:00.02 /sbin/SystemStarter
43 ?? Ss 0:00.06 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/RFBRegisterMDNS
45 ?? Ss 0:00.38 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
46 ?? Ss 0:00.61 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow console
47 ?? Ss 0:00.01 /usr/sbin/KernelEventAgent
49 ?? Ss 0:00.64 /usr/libexec/hidd
50 ?? Ss 0:00.06 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/Support/fseventsd
52 ?? Ss 0:00.01 /sbin/dynamic_pager -F /private/var/vm/swapfile
58 ?? Ss 0:00.01 autofsd
66 ?? Ss 0:02.25 /usr/libexec/ApplicationFirewall/socketfilterfw
81 ?? Ss 0:00.03 /usr/sbin/ocspd
88 ?? S 0:00.21 /Applications/Retrospect Client.app/Contents/Resources/retroclient
89 ?? Ss 0:00.01 /Library/StartupItems/ParallelsTransporter/llipd
93 ?? Ss 0:04.04 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer -daemon
94 ?? Ss 0:00.11 /usr/sbin/nmbd -F
114 ?? Ss 0:00.05 /usr/sbin/coreaudiod
136 ?? Ss 0:02.00 /sbin/launchd
140 ?? S 0:02.16 /System/Library/CoreServices/Dock.app/Contents/MacOS/Dock
141 ?? S 0:01.01 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
142 ?? S 0:03.13 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
146 ?? S 0:00.01 /usr/sbin/pboard
147 ?? S 0:00.44 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd
150 ?? S 0:00.62 /usr/libexec/UserEventAgent -l Aqua
153 ?? S 0:00.07 /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent
158 ?? S 0:00.13 /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent -launchd -allowquit
159 ?? S 0:00.03 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer
160 ?? S 0:00.07 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer
171 ?? S 0:00.24 /System/Library/Frameworks/SyncServices.framework/Versions/Current/Resources/Sy ncServer.app/Contents/MacOS/SyncServer
178 ?? Ss 0:00.14 /usr/sbin/smbd -F
183 ?? S 0:05.65 /Applications/iTunes.app/Contents/MacOS/iTunes -psn_0_65552
186 ?? S 0:00.07 /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iTunesH elper -psn_0_69649
188 ?? Ss 0:01.01 /System/Library/PrivateFrameworks/ApplePushService.framework/applepushserviced
192 ?? S 0:01.09 /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal -psn_0_73746
195 s000 Ss 0:00.07 login -pf web
196 s000 S 0:00.02 -bash
204 s000 R+ 0:00.01 ps ax
mbp081:~ web$ -
Iphoto does not show map (places) - any ideas?
iphoto has stopped showing the map and location pins when we select "places" - any ideas why and how to fix it? we have Iphoto '09
Go into Safari's cookies and delete all cookies with Google in the name. Close and relaunch both Safari and iPhoto. Also log ot of any Google account you may be logged into online.
If you have a Google account you will have to repeat the cookie deleting every time you log into that account.
OT -
Ultimate commit does not get made. Any ideas
Hi Folks.
I have written the following program unit. This is fired from a WHEN-CHECKBOX-CHANGED trigger in my form.
If I happilly click a checkbox on and off several times the program unit works fine, making changes and then undoing them.
The only thing it does not do is make the final call to UPDATE_SESSION_LOG.
Eg.
If I check and uncheck the same checkbox 5 times then all the changes to the required tables are made correctly apart from the final call to UPDATE_SESSION_LOG which seems to get missed. Both program units are listed below.
Please post a reply with any sugggestions.
Cheers
Simon
PROCEDURE ASSIGN_UNASSIGN_PU_P IS
v_check NUMBER(1);
v_payment_ref VARCHAR2(80);
v_payment_date DATE;
v_payment_amount NUMBER(12,4);
v_payment_currency CHAR(3);
v_payment_status NUMBER(1);
v_invoice_number CHAR(18);
v_running_total NUMBER(12,4);
v_user CHAR(10);
BEGIN
v_check := NULL;
v_check := :POSITION_ASSIGN_CANDIDATE.ASSIGNED;
v_user := GET_APPLICATION_PROPERTY(USERNAME);
IF v_check = 1 THEN -- Invoice marked as paid
v_payment_ref := :POSITION_ASSIGN_SUMMARY.PAYMENT_REF;
v_payment_date := :POSITION_ASSIGN_SUMMARY.PAYMENT_DATE;
v_payment_amount := :POSITION_ASSIGN_SUMMARY.PAYMENT_AMOUNT;
v_payment_currency := :POSITION_ASSIGN_SUMMARY.PAYMENT_CURRENCY;
v_payment_status := 1;
v_invoice_number := :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_NO;
UPDATE SETTLEMENTS
SET PAYMENT_REFERENCE = v_payment_ref,
PAYMENT_DATE = v_payment_date,
PAYMENT_AMOUNT = v_payment_amount,
PAYMENT_CURRENCY = v_payment_currency,
PAYMENT_STATUS = v_payment_status
WHERE UCL_INVOICE_NO = v_invoice_number;
:SCB_TRANSACTIONS.PROCESSING_STATUS := 2;
:CONTROL.TOTAL_SELECTED := :CONTROL.TOTAL_SELECTED + :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_AMOUNT;
SYNCHRONIZE;
COMMIT;
UPDATE_SESSION_LOG('Assigned', 'Ref '||SUBSTR(:POSITION_ASSIGN_SUMMARY.PAYMENT_REF,1,65), v_invoice_number, SUBSTR(v_invoice_number,1,5), SUBSTR(v_invoice_number,7,5), v_user, SYSDATE, NULL);
ELSIF v_check = 0 THEN -- Invoice being marked as unpaid;
v_payment_ref := NULL;
v_payment_date := NULL;
v_payment_amount := NULL;
v_payment_currency := NULL;
v_payment_status := 0;
v_invoice_number := :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_NO;
UPDATE SETTLEMENTS
SET PAYMENT_REFERENCE = v_payment_ref,
PAYMENT_DATE = v_payment_date,
PAYMENT_AMOUNT = v_payment_amount,
PAYMENT_CURRENCY = v_payment_currency,
PAYMENT_STATUS = v_payment_status
WHERE UCL_INVOICE_NO = v_invoice_number;
:SCB_TRANSACTIONS.PROCESSING_STATUS := 1;
:CONTROL.TOTAL_SELECTED := :CONTROL.TOTAL_SELECTED - :POSITION_ASSIGN_CANDIDATE.UCL_INVOICE_AMOUNT;
SYNCHRONIZE;
COMMIT;
UPDATE_SESSION_LOG('Unassigned', 'Ref '||SUBSTR(:POSITION_ASSIGN_SUMMARY.PAYMENT_REF,1,65), v_invoice_number, SUBSTR(v_invoice_number,1,5), SUBSTR(v_invoice_number,7,5), v_user, SYSDATE, NULL);
END IF;
END;
PROCEDURE update_session_log (module varchar2, description varchar2, invoice_no char, pmn char, p_pmn char, aUser char, aDate DATE, period char) IS
the_user varchar2(10);
the_date DATE;
BEGIN
the_user := Get_Application_Property(USERNAME);
the_date := SYSDATE;
INSERT
INTO OPS_LOG_SESSION
VALUES
module,
description,
invoice_no,
pmn,
p_pmn,
the_user,
the_date,
period
COMMIT;Hey Lozzerg,
Thanks for the question. I understand that you are having issues send email on your iPad Air. The following resource outlines troubleshoot steps that may lead to a resolution:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M. -
Ipod not lighting up. Can barely see that it is on. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Trying to download adobe program adobe photoshop CS5 Optional Automate Plug-ins, but get a message that it does not contain valid signature and it won't install the app. Can someone help with this please? Trying to reach Adobe by phone is impossible.
evFirst, have you installed all the updates for photoshop cs5 by going to Help>Updates from within photoshop cs5?
The automated installer only installs the following plugins:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
The following plug-ins and associated files are available via an installer:
Automate Plug-Ins:
• Contact Sheet II
• Picture Package (ContactSheetII)
• Web Photo Gallery (WebContactSheetII) plus presets
• Script for Layer Comps to Web Photo Gallery
Other Optional Plug-Ins:
• TWAIN
Other plugins including the pattern maker plugin need to be installed manually using this download:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4964 -
My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Most of the time says unable to join network? My laptop and ipad seem fine? Very annoying Please help!
All the information you need is right here: http://www.apple.com/iphone/specs.html
Notice there is no mention of WiMax.
It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment. -
Running w8.0 just installed Slideshow 1.4.7 to view multiple jpg images in an attachment in Thunderbird 24.4.0. As I understand it Slideshow should show beside the attachments, it's not there. Have tried numerous reboots etc but still not happening. An ideas?
Hi Matt, Yes I have expanded the attachments (there are 15 in this particular email) & there is nothing other than the jpg images. Slideshow is in the "Extensions" and appears to be ready to go, just not showing up in attachments.
Maybe you are looking for
-
Report to check work schedule - If case more than hundreds of work schedule
dear experts, I have one issue to create work schedule for the next year. I want to create(pt01) active work schedule for the next year(2012). However i have issue because I don't remember which work schedule still active.This is because we have hund
-
Drill-Down from several Charts to Same Target
Hi, we have built a dashboard with 3 (soon to be 6) column charts and one line chart below. The colum charts represent 6 KPIs aggregated for a year for different warehouses. Each warehouse is a specific series (because we want them to have a individu
-
What is taking up so much space?
My iMac (aluminum) has suddenly accumulated nearly 3 times as much file utilization as it had a week ago. A week ago my 500 GB harddrive had 44 GB used. Since then, I've installed nothing of consequence and haven't actually used it all that much. Las
-
How to reduce processing time in case of jms to idoc scenario
hi all, i am doing jms to idoc scenario. in this i'm using xslt and graphical mapping. while perfroming E2E testing the messages are taking lot of time to get processed. please tell me as how can i reduce this processing time or in short how can i ov
-
When I tried posting a SCORM zip file into WebCT 6.0 I received the following message. "The SCORM package could not be imported because it does not comply with one or more specifications within the package. The following error was produced: **Parsing