Icloud email send but not receive email

Sorry for my English but I am Italian.
from the site icloud.com going to mail I can send emails but not receive, what can I do to fix it?
I have not enabled forwarding messages to other e-mail

I have the same issue....it only affects my me.com email account that I setup to utilize iCloud.   I can receive email OK but get an error when sending,,,,,"The connection to the outgoing server p07-smtp.mail.me.com failed."
I go to settings to check the smtp settings and it won't let me change them.
Any thoughts?

Similar Messages

  • Can send but not receive email

    I have contacted my ISP and confirmed my password and settings. I can log on and send but not receive. The emails are on the server. This problem started after I installed the latest apple security update. The isp tech felt everything was ok there and that the problem was due to the security update blocking incoming mail.
    Any ideas on how to fix this?
    Henery
    powerbook15   Mac OS X (10.3.9)   mail version 1.3.11 (v622/624)

    Thanks, Dave!
    I had the same problem. Could send but not receive, on three email accounts all of which were on the same server. The other four accounts on two different serves worked fine. This was a sudden change and I had not changed any mail prefs for several weeks or anything on the server end in months. I spent 3.5 hours on this this evening, excahnging emails with customer suppert at the server (using the other accounts of course), going through the complicated webstie to check the server configuration, checking the prefs in mail over and over and over, setting up the email on another computer to discover it worked, throwing everything realted to these three accounts out of keychain thinking maybe it had saved an old password.
    Came in here to post a plea for help and read your message. The offline bits were set. And the list of accounts under the IN heading had been collapsed (I generally have it open, don't know how it was collapsed) so that I couldn't see the obvious offline indicator. !!!
    Thanks again! Where were you 3.5 hours ago?
    Bob H

  • Using osx 10.7.5 can send but not receive emails. Mail server support rep tried everything

    Using iMac with OSX 10.7.5. Can send but not receive emails. No problem with internet account. Server rep tried everything and suggested perhaps a corrupted file in the op syst. Any ideas?

    You may have a corrupt preference. Mail - Preferences - Accounts - click the offending account and re-enter all prefereneces. Also you can use Apple's OS X Mail: Troubleshooting sending and receiving email messages located at:
    http://support.apple.com/kb/ts3276

  • I can send but not receive email

    Hello All. I know this is a highly posted topic but I cannot find a solution. Any help is greatly appreciated.
    Basic Problem- I can send but not receive email.
    My ISP is. Yahoo SBC Global
    I have a 3rd party email provider: 1and1.com
    I have set my preferences according to the specifications of 1and1.com
    The error I get is this: The server error encountered was: The attempt to read data from the server "pop.1and.com" failed.
    I have a Macbook Pro, running 10.4.9. My account with the 3rd party email provider is new and only has 1 or two emails in the account. I know this because I can log on via the internet and use their website to check the emails in the inbox. So the "email" address is working. I just can't get it to forward to my laptop.
    I'm wondering if it has something to do with port 110 being blocked by my ISP. But I really don't think they are blocking that port. Due to the fact that my previous computer was a dell, and I used a similar 3rd party provider to email, the account used port 110 and things worked fine.
    Thanks to all.

    Ok. I've got it working.
    All I did was delete my account information from the preferences. Before, I was editing it.
    I entered a completely new POP account and it started working. I have a hard time believing that I entered information incorrectly prior to this because I checked it, rechecked it had a friend check it and it all looked OK. I was copy and pasting information anyway.
    However, once I deleted and re- entered a brand new account, it worked fine.
    Ernie, thanks for replying to my emails! I appreciate it.
    -Fraky

  • Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive.  I was told it was just worn out.  So I ordered another Octane and it w

    Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive.  I was told it was just worn out.  So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed.  So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to.  Verizon guys are stumped too:( Please help!!  Thanks!

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • I have an iphone6. And out of the blue my group messages aren't working. I can send but not receiving any back.

    I have an iphone6. And out of the blue my group messages aren't working. I can send but not receiving any back.  Any ideas???  I already reset my phone twice.

    You should check that your settings (both directions) match this:
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead.
    Your signature says you have 10.6.8 - is this correct? If you migrated from MobileMe using this your mail settings won't be correct and you will need to follow this procedure to re-enter them:
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • E71 Imap, can send but not receive

    HI all
    I received my E71 about a week ago and having major problems configuring it with my work email.
    Its an IMAP mail. I can send fine but on most occasions cannot receive. Occasionally it downloads some mails but only twice in the last week. I think this shows the settings are correct.
    Have tried to sign up with Nokia mail but get the following error message:
    'Unable to connect with the information provided. Please try again.'
    My colleagues in the UK use Blackberrys fine and have spoken with IT and they cannot think of any reason why this is happening. I have deleted the mailbox and set it up again many times but still can send but not receive...
    Very grateful for any advice as really happy with the phone other than this which is the main reason why I bought it.
    Shane

    Hi Anne,
    Is this IMAP or POP account?
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.

  • Why can I send  but not receive them?

    Why can I send  but not receive them?

    Macrumors posted a solution for this.  I used it and it seems to have worked for me.
    Here's what they said:
    1. Turn off iMessage in Settings > Messages
    2. Reset networking settings in Settings > General > Reset
    3. Reenable iMessage in Settings > Messages
    Source:
    http://www.macrumors.com/2013/09/30/resetting-network-settings-may-fix-imessages -not-working-in-ios-7/

  • OS X 10.4.11 will send but not receive faxes on Power Mac G4 MDD

    OS X 10.4.11 will send but not receive faxes on my Power Mac G4 MDD. Perhaps I should remove the relevant .plist preference file(s). But which one(s) is it /are they? Or is there something else I should do?

    Thank you for your reply, BDAqua. I have set the fax feature to answer after 3 rings, but the phone rings only once when someone is trying to send a fax. The phone icon in the menu bar changes to "ringing ..." but nothing more happens. The phone line on which I receive faxes is dedicated to that use. I phoned in to its number earlier today from another phone. I heard it ring once and then it went to the busy signal. I then disconnected the fax phone line from its wall jack, connected a phone to the jack, and phoned in to it. The phone now rang and rang as it should. So this confirms the assumption that the fault is in the computer, presumably in the Print & Fax software. I should also mention that I don't find com.apple.print.FaxPrefs.plist in /Library/Preferences.

  • Upgraded to Tiger; Mail can Send, but not receive... help!

    Hi there,
    I've come across lots of issues people have had importing all their mailboxes when they've upgraded from Panther to Tiger, but my wife's problem is different - - Mail can Send, but not receive. 'Get Mail' hasn't worked since the upgrade. I've been on the phone with my POP server provider, and all my Mail Account settings are correct. I can send mail, as I say, and sure enough, there it is in her Hotmail web page, along with all the other messages people have sent her in the last two weeks...
    So why can't Mail 'get' these messages, if all the settings are correct?
    Any advice would be appreciated.
    Malcolm

    You’re welcome.
    If you deleted a POP account, then all the messages stored in that account’s mailboxes has certainly been wiped out, not just moved somewhere, and you were warned that this would happen by the following alert:
    Remove Account
    Are you sure you want to remove the <AccountType> account "<AccountName>"?
    This will permanently delete the account setup information, mailboxes, and messages from your computer. Messages stored on the mail server will not be affected.
    To prevent that from happening, you should have moved those messages to custom “On My Mac” mailboxes instead of leaving them in the account’s mailboxes. Actually, using Inbox and Sent for archiving purposes is a bad idea regardless.
    If the messages are not on the server and you don’t have a backup (which you should have made before doing something like that), you may try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage (the files to be recovered would be different in the case of Mail 1.x). Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.

  • Exchange mail- can send but not receive?

    Anyone had this problem?
    I have the mail app set up with my company's exxchange server as the incoming, outgoing and OUtlook webs access servers and no go, I can send but not receive in the app....
    -c

    Check with your Exchange administrator.

  • HP Officejet 4315v All-in-One will send but not receive faxes

    I can send faxes on my HP Officejet 4315v All-in-One printer, but cannot receive them.  Please help. 

    Hi @exotica7 
    I would like to help you with the fax issue you are experiencing. The following documents address fax issues that may arise. Although you can send but not receive,  I suggest starting with the first document. It will guide you through the necessary steps to troubleshoot receiving issues.
    Cannot Send or Receive Faxes
    Troubleshooting 'Phone Off Hook' Front Panel Messages
    'Phone Off Hook' Status Message Displays on the Control Panel
    Interpreting Error Codes in Fax Communication Error or Fax History Reports
    Testing Your HP Fax Machine with the HP Fax Test Service
    Incoming Faxes Print Small or Print on More than One Page, or a Blank Page Ejects Between Printed Fa...
    Using the Fax Diagnostics Test
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • IPhone5 will send but not receive Text messages

    IPhone5 will send but not receive Text messages.  Specifically, I can send my grown son text messages, but he can not reply to them, nor can he send me new texts. He and I are both on Verizon, and he has a Droid phone.  His texts can be recieved by his mother, who can forward them successfully to me.  When I initally received the phone (Dec 2012) I could receive and send texts with my son with no difficulty. The trouble began (as near as I can tell) when my phone was upgraded to 6.1.1.  This is a significant problem and I would like it resolved as soon as possible.

        Scouter, let's get you reconnected with your son, via text message. Make sure that your text messaging feature is enabled in Settings>Messaging:
    enable iMessage ON
    enable "Send as SMS" to ON
    MMS Messaging ON
    You will also need to reset the network connections in:
    Settings>General>Reset>Reset Network
    Finally, power cycle your phone off/on and try to send your son a text message. Keep us posted. We're here to help you.
    LasinaH_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • My MacBook Air will send but not receive Airdrops?

    Does anyone know why my MacBook Air running OS X 10.9.4 will send, but not receive, AirDrop files?  I've tried to see if there are any security settings blocking receiving but have been unable to find anything.  Thank you!

    If the firewall is on, turn it off in the Security & Privacy preference pane. Otherwise see below.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Office 2008: Entourage can send but not receive email

    Purchased Macbook Air and wirelessly loaded Office 2004 from my other Macbook Pro. One week later, I updated to Office 2008 for Mac. Two months later, Entourage became corrupted: can only Send email, but not receive any; Calendar and other functions continue to sync with no problem. Also, email sent to Trash doesn't empty. Original disc unavailable at present; potential conflict with Office 2004?

    Glennbradley,
    It's possible that some data in the Microsoft User Data folder (located in your documents folder) has gotten a bit "wonky."
    My understanding of the '08 installer is that it purposely runs a script at the conclusion of the installation to removal '04 if it was found on your system. Was that not the case? Do you still have a working '04 set of applications?
    Also, the fact that it did work (and doesn't now) tells me that somehow your profile or the Entourage database has become corrupted or unstable for various reasons. Have you followed the support documentation on repairing your Entourage profile? What sort of success/failure has that generated?

Maybe you are looking for

  • Saving parameters entered in a gui dialog to be used in the main panel

    Hi, I'm having a nightmare at the moment. I've finished creating a program for my final year project, that is all comand line at the moment. i'm required to design a GUI for this. i've started already and have a main panel that has a few buttons one

  • What are the possiblities to create BO report on SAP Tables

    Hi All, Can any one please sugegst me the possiblities to create a BO report WEBI/Crystal on SAP ECC Tables . Thanks Bin.

  • Unique Render File Name For Clips?

    How do I create a unique output file name for each clip in my timeline that is edited? Example: REEL_123.MOV appears 3 times on my timeline at different edit points. I need the output to  be REEL_123_1.MOV REEL_123_2.MOV etc. etc. Or something simila

  • CachedRowSetImpl and DataSource

    Hi pals, I got a problem with the CachedRowSetImpl. I set the DataSourceName of the CRS. When I debug, it can successfully connect to the DB and reads the data. It however throws an execution saying "java.sql.SQLException: The url cannot be null". If

  • New instances of SAP BO by XML input

    Hi, experts,           Is it possible to input new instances to a Standard SAP BO by using XML input of Service Integration?           I am trying  but still can't figure it out.           If the input is possible, please share me some documentation