ICloud error message won't go away

On my ipad, iCloud was full; now I've bought additional storage but error message titled "icloud backup" remains on screen and doesn't go away when I press "OK", ipad now unusable.  Any tips?  Thanks

finally tried pressing both power buttons at once forcing restart & the error went away... should have tried this before !

Similar Messages

  • Inconsistencies error message won't go away

    On the MacBook Pro, running os x 1.4.9
    I keep getting the warning about syncing time delay due to "Inconsistencies in your sync information for Calendars were detected". i don't use iSync and i don't have an iMac account, so i don't CARE.
    But the message won't go away. What do i have to nuke to make it stop? it's incrediobly annoying, as it pops up every few seconds.
    MacBook Pro Intel, powerbook g4, G3   Mac OS X (10.4.9)  

    finally tried pressing both power buttons at once forcing restart & the error went away... should have tried this before !

  • HT4356 HP printer error message won't go away

    I've been printing from iPad to HP Envy with non-HP cartridges for years with no problems. Now the "non-HP cartridges installed" error message on printer won't go away when I hit OK.  iPad reads this as "printer is out of  ink."  Rebooting didn't help.

    Hi PJSammy,
    Here is a link to a post that should help you resolve your issue.
    Let us know if this works for you.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • HP A 909a ink error message won't go away

    "replace yellow cartridge" message. Have replaced twice with HP product. Still getting message- of course printer will not print, bought brand new replacement cartridge- getting same error message. I have shut down, removed all the cartridges, etc , but still get the same message. Unit won't even print in black and white. What a POS! not even 2 years old yet. 
    Any suggestions?  Thanks

    finally tried pressing both power buttons at once forcing restart & the error went away... should have tried this before !

  • Can't open iMovie - error message won't go away

    The error message reads "The movie File "Pierce Struts" cannot be found. Without this file, the movie cannot play properly."
    And then I either click Cancel or Search.
    I've tried everything and can't get this error message to stop. It won't let me open iMovie. Help.

    reproduce is easy. anytime i click to open an attachment or a pdf file.
    it won't open.  comes up with notice that adobe acrobat has stopped
    working and the program will close.  I can go to READER AND OPEN THE
    FILE BUT NOT FROM ACROBAT X PRO.   RATHER SILLY.
    ERROR MESSAGES ATTACHED
    THANKS FOR THE ASSIST
    Dan Valentine, GRI, e-PRO, MA min
    Broker-Owner
    Valentine Sales & Management
    "Building & Maintaining Rental Portfolios"
    "One-Stop-Shop: AcquireRehabLeaseManagementStrategic Disposition"
    www.ValentineTeam.com
    www.ValentinePropertyManagement.com
    www.InvestAZRentals.com
    12031 N. Cave Creek Rd.
    Phoenix, AZ 85020
    Cell-Text 602-377-0621
    Office- 602-866-0150
    Fax-602-926-8260
    [email protected]

  • Network error message won't go away

    I"m having some connection problems.  Opening System Preferences and going to Network, an error message says "Your network settings have been changed by another application."   I have no idea what that means - there are no other applications. 
    I click "OK" and the message is in a continuous loop, i.e., it keeps popping up (or down, actually).  I have to click "OK" and quickly click the close button to get out or force-quit System Preferences. 
    How can I chase this down?   What application might have changed these settings?  How can I diagnose this to then diagnose the original connection problem?
    Thanks in advance to all.

    The problem is explored in the following link, including some suggested fixes.
    https://discussions.apple.com/thread/1764568

  • Repeating network error message won't go away!

    I am trying to select the network tab in system preferences and a window pops out to tell me that
    '...network settings have been changed by another application.'
    when I click ok, the window pops back in again but then pops straight back out again and I don't know why and I can't get rid of it.
    Can someone help or shed light???
    Thanks,
    Ben.

    See the following:
    A Fix for "Your network preferences have been changed by another application" Error
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting these files will cause them to be returned to defaults.

  • L7590 Error message won't go away "ink cartridges appear to be missing or damaged" HELP!

    I opened the door to get my cartridge numbers.  The numbers are not visible so I closed the door.  Now I am getting a meaasge that my cyan and black cartridges are missing or damaged.  Both were almost brand new.  I have now removed and reinstalled them and removed power to the printer overnight.  It won't clear up.  I need help, please!   Thanks!

    I'd advise calling HP phone support. You'll need to tell them the warranty ends date written on the cartridge...(no need to enter it on the website, as that's just for printer warranty)
    http://welcome.hp.com/country/us/en/wwcontact_us.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • TS3938 PowerPC Error message won't go away

    The warning box displays showing 'You can't open the application NotificationsExec because PowerPC applications are no longer supported'. When ok is clicked a new box comes up within 10 seconds. How can I get rid of this? I don't know which program it is referring to

    SMG2 wrote:
    The warning box displays showing 'You can't open the application NotificationsExec because PowerPC applications are no longer supported'. When ok is clicked a new box comes up within 10 seconds. How can I get rid of this? I don't know which program it is referring to
    The thing launching this is almost certainly coming from one of the following places:
    /Library/LaunchAgents
    /Library/LaunchDaemons
    /Library/StartupItems
    Less likely for this case are,
    on of your account's login items
    ~/Library/LaunchAgents (in you home directory)
    If it is not obvious to you what it might be post the files you see listed in these places.
    Note, some intial google research on NotificationsExec suggests it may be related to some segate free agent support stuff.  Does that ring any bells with you.  And if it does possibly look for filenames in the places I suggested with "segate" or "free agent" in the name.

  • J6480 Ink Cartridge Door Hinges Broke. Door Open error message won't let me print. What can I do?

    Have always been very careful with cartridge & scanner doors.  Pressing OK doesn't remove error message.  Broken hinges will no longer go down, so Door Open message won't go away and preventing printing.

    The problem is the spring tension used to hold the cover open is stronger than the poorly designed weak hinges.
    The way I solved it was to break both the hinges, (pretty easy to do just open and close the cover a few times),  lift the cover up being carefull not to break the ribbon cable (wires) from the cover to the base. Then I pryed out the lower spring plates, these are located in the hinge assembly of the printer and removed the black plastic plunger and  the large springs below it from both hinges. The cover wil now stay closed and allow you to print. You just have to be careful when changing the print cartridges as the cover can open too far now and possibly break the wires going to the top cover.
    Happy Printing

  • . I have an iCloud error message on the screen.

    The screen on my iPad is frozen. The hard reset does not reboot the iPad. I have an iCloud error message on the screen. That I can't get rid of.

    Thank you. I had tried this before with no success. However, I tried it again. The problem is I don't know who to reboot without a keyboard. I can't get to the on screen key board with the screen locked up.
    The error message I get is   "  iCloud Backup      This iPad hasn't been backed up in 2 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi" at the bottom of the message is an OK button.
    Now with the iPad removed from the keyboard:the screen will stay lit for about 5 seconds and then go blank. Turning power off and on brings up a blank screen with the iCloud message and the slide to unlock. Touching the OK button causes a brief flutter of the button. Trying to slide the slide to unlock accomplishes nothing, since it won't slide.
    The battery was at 49% when the problem occurred. I have since recharged the battery to 100%. I  tried earlier to reboot with the iPad connected to AC.
    Again, thank you for your suggestions.  

  • TS3274 icloud backup box won't go away, so i can't turn off my ipad or do anything on it

    icloud backup box won't go away, so i can't turn off my ipad or do anything

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Every time I open Itunes or plug in my Ipod or Ipad I get an error message that the registery settings for burning cds and dvds are missing and to reinstall Itunes.  i've done this several times but the message won't go away.

    Every time I plug my Ipod Nano or Ipad 2 into my computer I get the same error message.  It says that registery settings are missing for importing burning cds and dvds due ot other burning software and to untinstall itunes and reinstall Itunes.  I've done this several times and I'm not having any trouble importing cds at all and I can't make the message go away.  It always comes up before Itunes will open.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I'm getting mdmclient error that won't go away

    I restored my computer yesterday and it was working fine.  This morning after booting, I am now recieving an error messag that won't go away even when I click 'Ignore'
    Below are the details when I click 'Report...'
    Process:         mdmclient [2736]
    Path:            /usr/libexec/mdmclient
    Identifier:      mdmclient
    Version:         1.6 (520)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [273]
    User ID:         501
    Date/Time:       2013-01-14 11:12:37.422 -0700
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Sleep/Wake UUID: 8691BEB3-4C2A-4ED1-9E8B-FAD122CCF685
    Interval Since Last Report:          1304923 sec
    Crashes Since Last Report:           17472
    Per-App Crashes Since Last Report:   164
    Anonymous UUID:                      5EB6D6FB-1718-D922-77A4-19931C576C6F
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/ConfigurationProfiles.framework/Versions/A/Co nfigurationProfiles
      Referenced from: /usr/libexec/mdmclient
      Reason: image not found
    Binary Images:
           0x100032000 -        0x10006efff  mdmclient (1.6 - 520) <E228B3E9-A4D7-390D-A318-B3487E890F21> /usr/libexec/mdmclient
        0x7fff5fc32000 -     0x7fff5fc6693f  dyld (210.2.3) <36CAA36E-72BC-3E48-96D9-B96A2DF77730> /usr/lib/dyld
        0x7fff8c7da000 -     0x7fff8c92bfff  com.apple.audio.toolbox.AudioToolbox (1.8 - 1.8) <833DA682-A3C1-39E7-AEC3-9EDC734DE2A9> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
        0x7fff8dee0000 -     0x7fff8e23cfff  com.apple.Foundation (6.8 - 945.11) <A5D41956-A354-3ACC-9355-BE200072223B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    Model: MacBookPro6,1, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Network Service: Parallels Host-Only #1, Ethernet, vnic1
    Serial ATA Device: ST9500325ASG, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Backup+ Desk, 0x0bc2  (Seagate LLC), 0xa0a4, 0xfd140000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

    I FIXED IT.
    The issue was a folder name.  For some reason, a folder was name Fersions when it should have been called Version.  I have no clue why it was named that way, but I named it correctly and the error disappeared.

  • Cannot sync to iclouds, error message -50

    Hello there,
    I cannot sync my iPhone 4s to iCloud. I keep getting error message "-50" from iTunes. I do have enough space on the cloud because I purchased a $20 1year space. My is also has an error: Not enough space to sync.
    Please help. Thank you.
    Jazzticks

    read why won't iPhone 5s sync with iTunes?

Maybe you are looking for

  • Problems moving library from old external drive to new one

    I keep all my music on an external hard drive connected to my laptop at home. I am now spending several months away from home, and couldn't take my external drive with me. I planned to handle this by using iTunes backup feature to put my whole librar

  • No Query Result After Using Hierarchy Node Variable (Customer Exit)

    Hi I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data. This problem happen when i change the restrictions for one of characteristic in filter value. The characterist

  • I am running on OS X 10.8.3 and I can't find iChat. Do I need to download it?

    I have never used iChat before, but I updated to OS X 10.8.3 thinking I would be able to find it somewhere. However, I am unable to find it.

  • Using OAF in R12

    Hi, I want to build OAF component in R12, i have installed dev suite 10g which includes JDEVELOPER. After starting JDEVELOPER i found "Workspace Configured for Oracle Applications" and "Business Component Package" are missing. So this JDEVELOPER is c

  • How come my apps stop working?

    how come my apps, they work but then they stop working and sometimes (actual all the time) i have to re-download them. and even after i do they work for about a day then stop working.