ICloud for multiple devices with different IDs

I presently have a MacbookPro (10.7.2), iPhone (5.0.1), and an iPad (5.0.1) all on iCloud, linked by my former MobileMe me.com account, that is now my new iCloud ID. No problems with these three.
What I would like to do (I think, read on...), however, is link my husband's iPhone and MacAir to the same iCloud account, as we share all key programs (calendar, contacts, photos, music, etc) except Mail. We were previously synced up
He has not upgraded his computer to Lion or his phone to 5.0.1 yet, but before we do that, I'm trying to figure out how we can make them all work together, less Mail, which I believe would mean setting up a new iCloud ID that we use for everything.
My questions are:
1 - Is it possible to reset my computer, iPhone and iPad that are already on iCloud to a new iCloud ID/email address, and if so, would I a) lose access to my old MobileMe me.com account that is presently acting as iCloud ID, and b) lose content from the programs (contacts, iPhoto, iTunes, etc)?
2 - If above is possible, if we create a new 'official' iCloud ID that we use on all devices in the family, would I be able to retain my old MobileMe me.com address, as I've used it for years and have too much saved in mailboxes to easily let it go?
3 - Also, would the joint syncing of all devices mean that all of my email addresses would be on his devices and vice versa, or would that be controllable (example, if I have new iCloud ID, old MobileMe, Yahoo, etc and he has new iCloud ID, AOL, Hotmail, do all show on both devices??)
If I am making our sharing of applications more complicated than it should be, please enlighten me. We basically just want to be able to have the same master contact list, calendar, iPhoto and iTunes libraries, Apps, etc..
Thank you!!!!

1a You won't be able to re-use your me address.
1b No you could save the content if done correctly (iTunes is not iCloud)
2 No, you won't be able to re-use your me address.
3 The me addresses on a single account can all show up on a device or none show up on a device depending on whether mail syncing is on or off, you can't have some addresses on and some of on a device.
I believe you have two choices.
You can both use your existing account and could sync all the things like calendars etc etc, you can have your email address and your husband could have an alias, but you would both see each others mail (and it's not overly clear which is which)
You can keep your account, he can start his own, that way you would each have your own email address without seeing each others. You can add his account to yours as a secondary account and just turn on syncing on calendars, contacts etc, he could do the same with your account. iTunes isn't iCloud, so you could both use your existing iTunes account and keep access to all your music, movies, apps, books etc. The only thing you couldn't share would be photostream, which is rather unfortunate but there.

Similar Messages

  • Single invoice for multiple orders with different divisions

    Dear All,
    while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I  tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
    Thanks In advance
    Regards
    CNRNAIR

    Hello
    single invoice for multiple orders with "different divisions" invoice is getting split
    FYI - Different Division means different Sales Area.
    So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
    Thus, combining docs with different sales area is practically impossible.
    Provided, you are using common division.
    Hope this assist you,
    Thanks & REgards
    JP

  • BO xi 3.1 u2013 schedule a template for multiple reports with different column

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks!

    Hi,
    The only approach I can think of is to create a template report which uses variables
    For each column you would need to variable
    v_columnAName and v_columnAValue
    v_columnAName would have a if statement in it
    =if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
    v_columnA would have a if statement in it
    =if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
    This would only work when you had a small set of clients.
    This might be more managable if it was done in the universe
    Regards
    Alan

  • Design a single template for multiple reports with different column order

    Hi,
    I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
    For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
    Thanks in advance.

    -As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
    As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
    -I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
    For the customer that want the same ordering of columns you can put those customers under one condition.
        for Example...
              if(?Client in ['clientA','clientA']) then
                        <TableName>.<Field>......
    -What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
    Regards,
    Amrita
    Edited by: Amrita Singh on May 21, 2009 7:54 AM

  • Single ERS Invoice for multiple POs with different GS and same IP

    Dear All,
    I have a Requirement as per the below scenario:
    We need to have single invoice created using ERS (MRRL) functionality in the below scenario:
    Two POs created with different Partner function GS (goods supplier) and same IP (Invoice party partner function).
    Ex:
    GS IP PO GR ERS
    vendor1 10001 4500001 500001 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
    vendor2 10001 4500002 500002 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
    When I run ERS for last 1 week (GR) and select the option (Doc selection – per IP or other criteria like GRs posted in last one week) , system should create 1 invoice document. Standard SAP posts 2 documents for each GS.
    I have tried using 2 user exits for MRRL, but none of them work for this functionality.
    Thanks,

    Hi,
    Go for  MIRO without MRRL.
    Instead ERS, you can post single  Invoice(MIRO) for multiple POs  for one vendor.
    OR
    Check with Technical consultant and go for development to have single ERS output for multiple ERS invoice documents for single vendor.
    Regards,
    Biju K

  • HT4914 Can you use iTunes Match on multiple devices with different apple id's ?

    I have multiple phones with the same iTunes ID but they have different apple ID , will the iTunes Match work with all my devices ?

    I've got the latest version of iTunes & it's supposed to be able to be enabled under top panel "store" then appear down left side panel to subscribe. Which makes me think that it musn't be able to be used if you're running XP as it's not there....

  • PDF for multiple users with different values

    Is there a way to create a PDF to be sent to multiple users but have different values in the PDF? For expample employee A's offer letter is for $50/hour while employee B's offer letter is for $55/hour. But they have the same offer letter just with different values.
    I have Enterprise EchoSign and FormsCentral.
    Thank you!

    Hi,
    Thanks for asking, but FormsCentral currently does not support this.
    Perry

  • Vendor invoie for multiple POs with different payment terms

    Hi,
    We have a vendor which send a single invoice for multiple POs which have different payment terms. Now if we create a single invoice in MIRO, then only a payment term can be applied.
    However user want to pay to the vendor corresponding to the PO terms.
    Please let us know any way apart from creating multiple MIRO documents.
    Regds,
    Nand

    Hi,
    You can achieve so in standard SAP.
    Go to OBY6 and activate the check box "Enable Amount Split" in your company code. Then in MIRO, a new tab will appear in the header as "Amount Split"
    In this tab, you can split the vendor invoice in multiple lines with respective payment method and payment term.
    I hope this will help you.
    Regards,
    Gaurav

  • How to locally backup multiple iPhones with different IDs

    Hi all, I have a simple need to backup 2 iPhones using different Apple IDs.  I understand that I can use iCloud to backup each on the cloud and no issue there.  But when I ran local backup for both on the same computer, here comes the problem...
    The 2 iPhones have some overlapping apps, but separately purchased on two accounts.  It seems that iTunes only keeps one copy of those overlapping apps, namely only the copy using the ID of the first phone in the sequence of backup.  So when I try to restore on the second phone, it will simply install those overlapping apps using the copy stored locally, which does not belong to the second ID.  This seems to create a lot of confusion later on when apps are updated, since the second user will be prompted to enter the password of the first ID.
    I suppose this kind of scenario is not uncommon.  Is there a way iTunes can properly deal with this?  Or did I not do the backup/restore correctly?

    Thanks, Lyssa.  I guess that probably will work, but feels like an overkill for a simple task.
    By the way, I am using iTunes on PC.  So the default path for media folder is C:\Users\USERNAME\Music\iTunes\iTunes Media, and the apps are stored in the Mobile Applications sub-folder under that path.  I wonder whether it will work to backup the first phone as usual first, change this path in the Advanced Preferences to another user created folder, and then backup the second phone.  During restore, I assume one can do the reverse and restore each phone while this path in preference is set accordingly.
    That's just an idea I have come to, inspired by your solution of changing user account... haven't tried it out yet.  I have to say, even that sounds like an inconvenient workaround.  Is there any more elegant method I wonder...?

  • One library with multiple devices with different accounts?

    Here is the setup:
    *(1) Windows XP PC with iTunes and (1) Library
    *(1) iPhone and (1) iPad with iTunes Account A
    *(1) iPad with iTunes Account B
    *(1) iTouch with iTunes Account C
    Is it possible to have one iTunes Library where we can all have our music (all we use really - no videos, etc) and can drag and drop among the different devices as we please?  If so, how can this be done?  If it cannot be done, what is the next best thing and how do you do it?
    (All devices are sync'd manually - we just drag / drop.)
    MANY thanks for your assistance.
    DJP

    Hmmm, thought I did that but ran into issues...Will give it a harder look.
    Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too...

  • Multiple devices with different song lists

    I use a PC for iTunes and I recently got a new iPhone.  Even after doing the backup before plugging in my new iPhone, I somehow managed to lose the 1000+ songs that I had uploaded from CDs onto iTunes. Long story short, I followed instructions to try to recover it, but it is gone.  All I have is 100 or so "purchased" songs on my iPhone.
    However, I still have all the missing music on my iPod shuffle. 
    If I plug my iPod into the same computer, will iTunes transfer all my music from my iPod so I can put it on my iPhone?  I am afraid it will sync with the music I have left on iTunes now and I will lose all that's on the iPod. 
    Thanks.

    1a You won't be able to re-use your me address.
    1b No you could save the content if done correctly (iTunes is not iCloud)
    2 No, you won't be able to re-use your me address.
    3 The me addresses on a single account can all show up on a device or none show up on a device depending on whether mail syncing is on or off, you can't have some addresses on and some of on a device.
    I believe you have two choices.
    You can both use your existing account and could sync all the things like calendars etc etc, you can have your email address and your husband could have an alias, but you would both see each others mail (and it's not overly clear which is which)
    You can keep your account, he can start his own, that way you would each have your own email address without seeing each others. You can add his account to yours as a secondary account and just turn on syncing on calendars, contacts etc, he could do the same with your account. iTunes isn't iCloud, so you could both use your existing iTunes account and keep access to all your music, movies, apps, books etc. The only thing you couldn't share would be photostream, which is rather unfortunate but there.

  • Perdiem calculations for multiple locations with different statutory types

    Dear Experts,
    As part of the perdiem calculations, when an employee selected different statutory trip types for different dates in a trip duration,perdiem to be calculated differently.But i am failing to calculate to such type of perdiems.
    For Example :
    Trip duration is, say from 01.05.2014 to 10.05.2014
    Statutory trip types X with amount 200/day, Y with amount 300/day
    When employee select the statutory trip type for  01.05.2014 to 05.05.2014 as X
    and for 06.05.2014 to 10.05.2014 as Y
    As per the scenario
    01.05.2014 to 05.05.2014 (5 days *200) =1000
    06.05.2014 to 10.05.2014 (5 days *300) =1500
    total perdiem amount to be 2500 for the total trip duration
    But my system considering last statutory trip type in calculating total perdiem as 3000 for the entire trip.
    Please provide your suggestions to meet the requirement mentioned above
    Thanks & Regards,
    Y.V.P.Deepak

    Hi Deepak
    Kindly mark correct  if  your question has been solved .
    For your next query , you can post it another post.
    To  post in Fi with amount split , you can work on another badi: TRIP_POST_FI
    There  you can make lot of changes before you post in FI
    Thanks
    Anwar Hossain

  • Can I set up iCloud for multiple devices

    My family has multiple apple devices and would like them synched to our Mac via iCloud.  Is this possible?  If so, please explain

    http://www.apple.com/icloud/setup/

  • HT202213 how can i do sharing between devices with different IDs?

    one of my kids has an ipod and an own apple ID and i would like to shara my own music with that device too.
    i've tried logging it with my apple ID but got a message saying i would then not be able to share with my own devices for the next 90 days....??
    i guess i'm doing something wrong.... appreciate any help!

    Does he have his own computer to sync with. Is it separate from yours?
    Then you could use Home Sharing to make sure both lots of content are the same on both machines.
    He will have to authorise his machine with your Apple ID for any purchased music to be played
    Store > Authorise this computer
    Then set up Home Sharing
    http://support.apple.com/kb/HT4620
    When it is up and running you can import from 1 library to the other and then your son can sync whatever he wants from his own iTunes

  • ICloud for multiple devices?

    Firstly, apologies for a stupid question!
    I've recently bought an iPad and set it up using the Apple ID that I use for my phone, but now I've realised it's obviously using the same iCloud account as my phone..
    Does anyone know if I can alter this without having to wipe the iPad and create a whole new iTunes account?
    I feel a bit cheated out of free iCloud storage!

    Thanks for the reply!
    It's more that I want each device to have its own iCloud storage, I'm not really interested in syncing both my devices so don't want them sharing the space! (The kid uses the iPad a lot so we don't want to share apps etc!)
    Would this mean if have to create a new iTunes account?

Maybe you are looking for