ICloud has stopped working on my PC (Windows Vista). The photos were streaming until November 14 and stream onto my three apple devices. Any suggestions?
iCloud has stopped working on my PC (Windows Vista). The photos were streaming until November 14 and stream onto my three apple devices. Any suggestions?
Try Googling "sync without iTunes".
There are free alternatives and there are not so free alternatives.
Btw, to check if AVG is causing the problem, you should uninstall AVG and not just "turn it off".
Also, can you describe how you go about uninstalling a program? For example, how did you "delete" iTunes?
Similar Messages
-
"itunes has stopped working" when closing itunes Windows Vista
Since November 2007, when I close itunes, I get Windows Vista error "itunes has stopped working" This got worse when it corrupted the itunes library itl file. I deinstalled QT and itunes version 7.5, and went back to version 7.4.3.1 - but the problem persists.
I believe this problem started with the install of version 7.5
Below is the crash information from Vista:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 7.4.3.1
Application Timestamp: 46f9e539
Fault Module Name: StackHash_0afa
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000374
Exception Offset: 000af1c9
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
Additional Information 1: 0afa
Additional Information 2: 2684fb59c11da8d751eea2c524906956
Additional Information 3: 7e99
Additional Information 4: 6fb64e982f7c00dccfe5a07cd555cadbI am running Windows 8.1 and iTunes 11.1.3.8. I found a simple solution by browsing through the support communities. Here it is: Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support to: C:\Program Files (x86)\iTunes
This worked for me. Good luck. -
Every time I turn on my PC I get a box saying 'AppleSincNotifier has stopped working'. My operating system is Windows Vista Home Premium. How do I fix this?
Hello janemacq,
If you are getting an error about a component of the Apple software not working on your Windows machine, you may want to try uninstalling and reinstalling the Apple software, as outlined in the following article:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
Sincerely,
- Brenden -
My MacBook air has stopped displaying images completely on the screen! What do I do?
Hello, Frank,
Hope you have solved the problem with your macbook air.
I am in the same situation now. Can you please tell me what solution you have found?
Many thanks, -
ITunes has stopped working on our computer (Windows Vista)
We have been using itunes successfully up until now when we have tried to create a new account for my son who has just received an ipod nano. We have managed to download some cds into his library but now I can't even access the store to create an account for him so he can buy tunes. The message in the fuzzy box just says 'accessing itunes' but it is not! I have uninstalled itunes and reinstalled it. I read that it could be an idea to install itunes 10.3.1 instead so I did this but then of course it won't give us access to the library because it was created ina newr version of itunes.
I also need to back up the library we have created but don't seem to be able to do this on to a disc. If I could do this, perhaps I could reinstall itunes 10.3.1 and restore the library to that? Please help - I have been trying to sort this out since Christmas Day and I think I am definitely at the limit of my experience.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
ICloud has stopped working continuously get the message windows 8.1 operating system
iCloud has stopped working continuously get the message windows 8.1 operating system
Hi Fe-Can,
If you are having difficulties with iCloud you may want to use the steps in this article to troubleshoot -
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks for using Apple Support Communities.
Best,
Brett L -
I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??
Try updating the printer driver.
-
Can't login to icloud, just says icloud has stopped working.
i have tried multiple times to login toicloud but after siting and spinning it says Icloud has stopped working, yet when i check on apple it says all is fine> now what ??
Well, you're gonna have to recover the password for that Apple ID:
http://support.apple.com/kb/ht5787 -
How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone
Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark -
My Creative Cloud has stopped working. If I click on the icon on my desktop nothing happens. I also cannot uninstall it. nothing happens
I also have this problem. I tried to reinstalll with the latest adobe download and it start, gets 10% through and then bombs out. It's in a deadlock.The only thing I think I can do is to restore the PC to before the installation and try again. THis is a ball ache because there are lots of other programs i need to reinstate to get back to normal. I have a support chatline open about the topic right now so If I get an answer I will let you know.
-
my iPod nano has stopped working. It is fully charged. I have tried to reboot and restore, and it still isn't working.
What do you mean it is not working? Does it power on? Is it recognized in iTunes? Need a bit more detail in order to assist you here.
B-rock -
My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS require a a passcode and I don't have one. Any suggestions?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup.
In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Last,
- Restore to factory settings/new iOS device. -
ITunes has stopped working ...Running Windows 7(64)
I upgraded my home PC Desktop to Windows 7 earlier this year and had no trouble bringing over iTunes from my previous platform (Windows XP).
I recently returned home to the US from a work assignment out of the country and because my iTunes resides on my home PC desktop, I didn't open up iTunes for the past 6 weeks. During this time Apple released iTunes 10.5. When I returned home, the old version of iTunes was still working. However, when I upgraded to iTunes 10.5, iTunes stopped working. The error message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have worked through the following knowlege bulletins (nothing has fixed my problem):
(a)" iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"
(b) "iTunes: Troubleshooting issues with third-party iTunes plug-ins"
(c) "iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio"
(d) "Removing and reinstalling iTunes, QuickTime, and other software components for Windows vista or Windows 7"
(e) "iTunes for Windows: system restarts, blue screen, or quits unexpectedly when accessing iTunes Store"
the last bulletin (e), recommended ensuring that my drivers were up-to-date. So I also updated my drivers.
Lastly, I contacted iTunes Store Customer Support (although my problem isn't with the store, it is upgraded iTunes running on windows 7). They told me the issue was "outside (their) expertise" and recommended I look at this discussion board.
Here is the information I found under Event Viewer:
==================================================================
Log Name: Application
Source: Application Error
Date: 11/27/2011 11:46:01 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Theresa-HP
Description:
Faulting application name: iTunes.exe, version: 10.5.1.42, time stamp: 0x4ebf7d7c
Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
Exception code: 0xc000000d
Fault offset: 0x00026b72
Faulting process id: 0x13b0
Faulting application start time: 0x01ccad3d27f6b2ff
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d 09154e044272b9a\MSVCR80.dll
Report Id: 6ef58025-1930-11e1-a798-e06995d0a503
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-11-27T19:46:01.000000000Z" />
<EventRecordID>9927</EventRecordID>
<Channel>Application</Channel>
<Computer>Theresa-HP</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>10.5.1.42</Data>
<Data>4ebf7d7c</Data>
<Data>MSVCR80.dll</Data>
<Data>8.0.50727.6195</Data>
<Data>4dcddbf3</Data>
<Data>c000000d</Data>
<Data>00026b72</Data>
<Data>13b0</Data>
<Data>01ccad3d27f6b2ff</Data>
<Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
<Data>C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_ none_d09154e044272b9a\MSVCR80.dll</Data>
<Data>6ef58025-1930-11e1-a798-e06995d0a503</Data>
</EventData>
</Event>
==================================================================
It seems that I am not alone in having this problem! Are there any experts out there who want to earn the undying gratitude of the technically challenged (or a few expert points?)
Thanks for listening,
Theresa
PS - someone recommended uninstalling Apple Quick Time Player. I don't have Quick Time Player.I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
The following solution worked for me:
COPY QTMovieWin.dll
FROM c:\program files (x86)\common files\apple\apple application support\
INTO c:\program files (x86)/iTunes -
Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)
I have a problem with Adobe premiere Pro CS6 on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I don't know what should I do. How to fix it ?
>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us -
V13 elements says "Has stopped working"... Windows cannot find fix.
V12 works fine.
robertl
What computer operating system?
At the onset, determine if the problem exists with or without the antivirus and firewall(s) disabled.
Did you ever get into a 13 project before the "has stopped working" message appeared?
Did you have time to work with the program so that you could update 13 to 13.1? Did the "has stopped working" message
appear after you updated 13 to 13.1?
If you have Premiere Elements 12/12.1 installed on the same computer as 13/13.1 and 12 is working and 13 is not,
then I would suggest the following
1. Delete the Adobe Premiere Elements Prefs file and, if that does not work, delete the whole 13.0 Folder in which the
Adobe Premiere Elements Prefs file exists.
Assuming Windows 7, 8, or 8.1 64 bit
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and in the 13.0 Folder is the Adobe Premiere Elements Prefs file that you delete. Make sure your computer is not set
up to hide files, folders, and drives.
2. If deletion of the Adobe Premiere Elements Prefs file or the whole 13.0 Folder in which the Prefs file exists does not
resolve the problem, then go for
a. Uninstall, the usual Control Panel route
b. followed by free ccleaner run through (regular cleaner and registry cleaner parts) CCleaner - PC Optimization and Cleaning - Free Download
c. followed by reinstall with antivirus and firewall(s) disabled.
Please review and consider, let us know the outcome, and then we will decide what next.
Thank you.
ATR
Maybe you are looking for
-
T.code for check the Total SRS
pls tell me t.code for match the SRS (stock requitions slip)from store or production ? Thanks Rekha Sharma
-
Is there a way to customize MFMessageComposeViewController?
Hi All, I have a requirement to customize MFMessageComposeViewController. Is there any way out? Or, we create custom message composer and send the message through MFMessageComposeViewController in the background? Or, is there paid API for that? Thank
-
Generating Peak File won't quit generating it
Captured roughly 2 hours of video using my Sony PD170 (don't laugh, I know it's antiquated, getting new one) with Windows Live Photo Gallery, (since PP CS4 quit importing video) and then imported that captured video into PP. I used 3 tapes to capture
-
I am missing the folder Auto Import. It is not in the package contents area, and I would like to add it to the Finder sidebar, so that I can just drag photos here, to import to iPhoto.
-
I'm sure this has been answered, but I couldn't find it in a search so... Everytime I plug my HTC Incredible into my PC, Internet explorer opens up and takes me to Verizon's website and wants to download VCast Media Manager to my PC. Trouble is, I'