ICloud: how to make it a useful tool?

I upgraded to iOS5 on October 12, probably to hastily. Now, the software is probably still in evolution, but as it is now it seems to me that it does not offer a useful tool as one expected from the big promotion from Apple. The main points are, in my opinion, the following:
1. I got 20 GBy of storage, but this is used only for documents which are produced under Apple software - i.e. iWork. I'm using only 0.3 GBy and this will be all.
2. access via my Mac is ackward, not "seamless". Only iPad and iPhone get easy access.
3. automatic sync is a nice aspect - like backup with time-capsule - but I would like to have more control, especially for documents which stored somewhere where I do not have direct access. I do not share the radical view of Stallman about "the cloud" but I start to appeciate some of his criticism about the limited control on the whole process.
Now, I would like to store ANY document in the cloud, my programs, my photos, etc. and decide which documents are free access to whom. This seems to be impossible at the moment. I'm keeping my dropbox account which allows me to easily share all the documents with my collaborators (and students). That's what I expected from iCloud. At the same time mobile.me shows rather serious malfunctioning. Syncing with iDisk is now problematic, contrary to statements (maintained to June 2012).
Finally, the new "System Preferences" on the Mac about iCloud is rather obscure, no clear info about the action to be taken. Rumors are that dropping sync from "documents" would erase the documents also on my mac. I dot not want anybody have automatic and anauthorised access to my files!
I expect Apple to improve the service - allowing access to iCloud with upload of any kind of software and sharing with third parties and taking any action on it only after explicit authorization on my part - otherwise I'll be obliged to cancel my account by next year.

Addendum: not only I can upload only documents created with iWork, but additionally I
have to upload them one-at-a-time. I have some 200 Pages docs. Are you kidding?
I hope Apple will be receiving millions of messages asking for a new discipline for iCloud,
more similar to Dropobox or Cloudapp, a merge of the best possible software. This is what
I expected by Apple. At present, iCloud looks like a toy for people having time to waste.
Anybody hearing at Apple? It hurts me to be polemic, but iCloud definitely looks like
an unfinished experiment, and Apple should listen, otherwise they are losing many
customers.
Best wishes, E.O.

Similar Messages

How to make load simulator using labview 2010

i want to ask how to make load simulator using labview?
Solved!
Go to Solution.

what have you tried so far? and exactly what is it your tying to do?
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

How to make RC circuit using labview

Hi,
how to make RC circuit using labview... Thx

Your question seems awfully similar to this thread. Is this a school assignment?
Jeff
Using Labview 7 Express

Can someone help me in learning how to make business cards using pages

can someone please help me in learning how to make business cards using pages

You could jump start the process with an Avery MS Word 8-up business card template as a free download. Either version of Pages will digest it nicely. Once you load it into Pages, do a File > Save As Template.. , add it to Chooser, and give it your name choice. Both versions of Pages will remove the printer registration marks in all four template corners. The free LibreOffice Writer retains them.

How to generate Webservices.xml using tool in Sun One App Server?

How to generate Webservices.xml using tool in Sun One App Server?

Hi,
The build.xml file should be in a directory from where
you are running the asant command.
To resolve the common.xml file not found error,
open your build.xml and check from which location the common.xml file is incuded.
In the sample application it is four directories above
the directory where build.xml is located.
You can copy the common.xml in the current directory and then change the following in your build.xml
<!ENTITY include SYSTEM "../../../../common.xml">
to <!ENTITY include SYSTEM "common.xml">
Hope this helps.
Get back in case you have more issues

How to make destop application using java

how to make destop application using java
i mean to say when we double click on the exe file the program should lounch the application
for windows

when i double click ii got the msg
Failed to lad main class manifest attribute from
x/x/xyz.jar
what exatly it meansIt means that your Manifest.MF for the JAR file should contain an attribute called Main-Class pointing to a class containing the main() method.
Something like this should be present in META-INF/Manifest.MF :
Main-Class: MyApplicationMain

How to make image resizable using mouse ?

Hi,
I want to know about that how to resize image by using mouse in Java Canvas. I created some tools like line, free hand, eraser. And want to know how to make an image resizable in canvas by using mouse. An image is jpeg, png, or gif format. I want to make image stretch and shrink by using mouse.
Please help me..
Thnax in advance.
Manveer

You make a listener to handle the mouse event that you want to capture, then program the affect you want using the event as the trigger.

How to make a driver using DLL in LabVIEW?

I had followed the "Using Exteranal Code in LabVIEW" manual having finished the making dll file, and the lsb file(I attempted that two ways). But when I load the code in LabVIEW, it can't work. I don't know what had happened, I only got a error message like this:"'0x100014f1'commond call memory'0x00000000',this memory can't be written" or other similar error message, if I push the "enter" button, the vi application which I having lunched will crash. If I push the "cancel" button, the debug model will start,and the next message is "Unhandle exception in LabVIEW.exe(MSVCRTD.DLL/LVS95.TMP/COUNTER.DLL(the last one is creat by myself)):0xC0000005:Access Violation", but I wonder what had cause this? My DLL had been made successf
ully under the VC++6.0, why LabVIEW can't call it fluently? How to make a driver for my own device using LabVIEW? How to correct my error to finished my hole work? Thank you very much. Jacky Wei
Attachments:
counter1.rar ‏33 KB

1. Can you call this DLL from within VC?
2. What operation system do you use? There may be a problem with calling of win95 dll under NT or win2000 for example.
3. If you use NT you may not have permissions to work with some ports and memory areas.
4. Under NT or win200 try to compile the library as a 32-bit dll, and under win95 - as 16-bit one.
Good luck.
Oleg Chutko

How to make a text formatting tools in oracle developer suite 10G R2

Dear Oracle Expert,
This is my configurations:
===============
1) OS-> windows 7 (Ultimate-32bit)
2) Oracle Developer Suite 10G R2
3) Oracle Database 10G
I create this form but i want it in that way. So, i can format the text written in text box, such as BOLD, Italic, make a url link etc.
How can i do that using Oracle Developer suite 10G R2.
Best regards,
Shimul

Mr.François Degrelle ,
Is this the proper command for sign-in the jar file
set PATH=C:\DevSuiteHome_1\jdk\bin;%PATH%
C:\DevSuiteHome_1\forms\webutil\sign_webutil C:\DevSuiteHome_1\forms\java\frite.jar
I am bit of confusing for this command C:\DevSuiteHome_1\forms\webutil\sign_webutil cuz here sign_webutil is used for webutil configuration. Just let me assure, that this is the right command or not. And if your answer is no, then what it will be.
Thanks in Advance

How to make a custom eraser tool using flash?

I did make a eraser tool. But once I begin to erase a layer, the background layer is visible. I want the layer just below the topmost layer to be visible.
For eg consider 2 layers.
Layer2 is above Layer1.
When I perform erase on Layer2, I see the stage background.
I want to actually see Layer1 when I erase from Layer2.
Here is the code I used:
The comment entry shows that, I have tried that possiblity.
import flash.display.BitmapData;
var linkageId:String = "myimage";
var myBitmapData:BitmapData = BitmapData.loadBitmap(linkageId);
trace(myBitmapData instanceof BitmapData);
this.createEmptyMovieClip("mc",this.getNextHighestDepth());
mc.attachBitmap(myBitmapData,this.getNextHighestDepth());
this.blendMode = "layer";
//mc.blendMode = "layer";
this.createEmptyMovieClip("mc1",this.getNextHighestDepth());
var myBitmapData1:BitmapData = new BitmapData(800,600, false, 0xFF000);
mc1.attachBitmap(myBitmapData1,this.getNextHighestDepth());
mc1.onMouseMove = function() {
var circle_mc:MovieClip = this.createEmptyMovieClip("circle_mc", this.getNextHighestDepth());
circle_mc._x = _xmouse-40;
circle_mc._y = _ymouse-40;
drawCircle(circle_mc,40,0x000000,50);
//mc.blendMode = "layer";
circle_mc.blendMode = "erase";
function drawCircle(target_mc:MovieClip, radius:Number, fillColor:Number, fillAlpha:Number):Void {
var x:Number = radius;
var y:Number = radius;
with (target_mc) {
beginFill(fillColor,fillAlpha);
moveTo(x+radius,y);
curveTo(radius+x,Math.tan(Math.PI/8)*radius+y,Math.sin(Math.PI/4)*radius+x,Math.sin(Math.P I/4)*radius+y);
curveTo(Math.tan(Math.PI/8)*radius+x,radius+y,x,radius+y);
curveTo(-Math.tan(Math.PI/8)*radius+x,radius+y,-Math.sin(Math.PI/4)*radius+x,Math.sin(Math .PI/4)*radius+y);
curveTo(-radius+x,Math.tan(Math.PI/8)*radius+y,-radius+x,y);
curveTo(-radius+x,-Math.tan(Math.PI/8)*radius+y,-Math.sin(Math.PI/4)*radius+x,-Math.sin(Ma th.PI/4)*radius+y);
curveTo(-Math.tan(Math.PI/8)*radius+x,-radius+y,x,-radius+y);
curveTo(Math.tan(Math.PI/8)*radius+x,-radius+y,Math.sin(Math.PI/4)*radius+x,-Math.sin(Math .PI/4)*radius+y);
curveTo(radius+x,-Math.tan(Math.PI/8)*radius+y,radius+x,y);
endFill();

use:
import flash.display.BitmapData;
var linkageId:String = "myimage";
var myBitmapData:BitmapData = BitmapData.loadBitmap(linkageId);
trace(myBitmapData instanceof BitmapData);
this.createEmptyMovieClip("mc",this.getNextHighestDepth());
mc.attachBitmap(myBitmapData,this.getNextHighestDepth());
this.createEmptyMovieClip("mc1",this.getNextHighestDepth());
var myBitmapData1:BitmapData = new BitmapData(800,600, false, 0xFF000);
mc1.attachBitmap(myBitmapData1,this.getNextHighestDepth());
mc1.blendMode="layer"
mc1.onMouseMove = function() {
var circle_mc:MovieClip = this.createEmptyMovieClip("circle_mc", this.getNextHighestDepth());
circle_mc._x = _xmouse-40;
circle_mc._y = _ymouse-40;
drawCircle(circle_mc,40,0x000000,50);
//mc.blendMode = "layer";
circle_mc.blendMode = "erase";
function drawCircle(target_mc:MovieClip, radius:Number, fillColor:Number, fillAlpha:Number):Void {
var x:Number = radius;
var y:Number = radius;
with (target_mc) {
beginFill(fillColor,fillAlpha);
moveTo(x+radius,y);
curveTo(radius+x,Math.tan(Math.PI/8)*radius+y,Math.sin(Math.PI/4)*radi us+x,Math.sin(Math.PI/4)*radius+y);
curveTo(Math.tan(Math.PI/8)*radius+x,radius+y,x,radius+y);
curveTo(-Math.tan(Math.PI/8)*radius+x,radius+y,-Math.sin(Math.PI/4)*ra dius+x,Math.sin(Math.PI/4)*radius+y);
curveTo(-radius+x,Math.tan(Math.PI/8)*radius+y,-radius+x,y);
curveTo(-radius+x,-Math.tan(Math.PI/8)*radius+y,-Math.sin(Math.PI/4)*r adius+x,-Math.sin(Math.PI/4)*radius+y);
curveTo(-Math.tan(Math.PI/8)*radius+x,-radius+y,x,-radius+y);
curveTo(Math.tan(Math.PI/8)*radius+x,-radius+y,Math.sin(Math.PI/4)*rad ius+x,-Math.sin(Math.PI/4)*radius+y);
curveTo(radius+x,-Math.tan(Math.PI/8)*radius+y,radius+x,y);
endFill();

How to make an index use in a query execution

Hi,
I have the below query for which ename column has an index. As of my knowledge below queries 1st and 2st will not use index. Hence i used the 3rd statement and that too its not using the index. Finally i used the 4th query, but even the 4th query is not using the index. Then how do i make this query to use my index??? Do i need to create a function based index for this??? Is that the final option????
1. select * from emp where ename !='BH' ;
2. select * from emp where ename <> 'BH';
3. select * from emp where ename not in ('BH');
4. select * from emp where ename < 'BH' or ename > 'BH';
Regards,
007
Edited by: 007 on Jun 6, 2013 7:56 AM
Edited by: 007 on Jun 6, 2013 8:06 AM
Edited by: 007 on Jun 6, 2013 8:06 AM
Edited by: 007 on Jun 6, 2013 8:06 AM
Edited by: 007 on Jun 6, 2013 8:12 AM

Sorry 007, I really thought you were posting a trick question as on the OCP tests.
Anyway, as Justin mentioned, if you have an index on ename, it may be used when doing a comparison predicate statement with the ename value.
What it depends on are several other things: stats, how many rows in the table, use of an index hint, etc.
Rather than questioning the group on this, why not just turn on autotrace and run the query for the different scenarios.
The output will show you if it used the index, number of rows returned, blocks read, etc.
SQL> create table emp (ename varchar2(40));
Table created.
SQL> insert into emp select username from sys.dba_users;
25 rows created.
SQL> commit;
Commit complete.
SQL> set autotrace on
SQL> select * from emp where ename != 'SYSTEM';
Execution Plan
Plan hash value: 2951343571
| Id | Operation        | Name      | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |           |    24 |   528 |     1   (0)| 00:00:01 |
|* 1 | INDEX FULL SCAN | ENAME_IDX |    24 |   528 |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter("ENAME"<>'SYSTEM')As you can see, the above used an index, even though there were only 25 rows in the table.
You can test each of your scenarios, one by one, including use of a hint.

How to make sql to use index/make to query to perform better

Hi,
I have 2 sql query which results the same.
But both has difference in SQL trace.
create table test_table
(u_id number(10),
u_no number(4),
s_id number(10),
s_no number(4),
o_id number(10),
o_no number(4),
constraint pk_test primary key(u_id, u_no));
insert into test_table(u_id, u_no, s_id, s_no, o_id, o_no)
values (2007030301, 1, 1001, 1, 2001, 1);
insert into test_table(u_id, u_no, s_id, s_no, o_id, o_no)
values (2007030302, 1, 1001, 1, 2001, 2);
insert into test_table(u_id, u_no, s_id, s_no, o_id, o_no)
values (2007030303, 1, 1001, 1, 2001, 3);
insert into test_table(u_id, u_no, s_id, s_no, o_id, o_no)
values (2007030304, 1, 1001, 1, 2001, 4);
insert into test_table(u_id, u_no, s_id, s_no, o_id, o_no)
values (2007030305, 1, 1002, 1, 1001, 2);
insert into test_table(u_id, u_no, s_id, s_no, o_id, o_no)
values (2007030306, 1, 1002, 1, 1002, 1);
commit;
CREATE INDEX idx_test_s_id ON test_table(s_id, s_no);
set autotrace on
select s_id, s_no, o_id, o_no
from test_table
where s_id <> o_id
and s_no <> o_no
union all
select o_id, o_no, s_id, s_no
from test_table
where s_id <> o_id
and s_no <> o_no;
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=6 Card=8 Bytes=416)
1 0 UNION-ALL
2 1 TABLE ACCESS (FULL) OF 'TEST_TABLE' (TABLE) (Cost=3 Card=4 Bytes=208)
3 1 TABLE ACCESS (FULL) OF 'TEST_TABLE' (TABLE) (Cost=3 Card=4 Bytes=208)
Statistics
223 recursive calls
2 db block gets
84 consistent gets
0 physical reads
0 redo size
701 bytes sent via SQL*Net to client
508 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
5 sorts (memory)
0 sorts (disk)
8 rows processed
-- i didnt understand why the above query is not using the index idx_test_s_id.
-- But still it is faster
select s_id, s_no, o_id, o_no
from test_table
where (u_id, u_no) in
(select u_id, u_no from test_table
minus
select u_id, u_no from test_table
where s_id = o_id
or s_no = o_no)
union all
select o_id, o_no, s_id, s_no
from test_table
where (u_id, u_no) in
(select u_id, u_no from test_table
minus
select u_id, u_no from test_table
where s_id = o_id
or s_no = o_no);
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=16 Card=2 Bytes=156)
1 0 UNION-ALL
2 1 FILTER
3 2 TABLE ACCESS (FULL) OF 'TEST_TABLE' (TABLE) (Cost=3 Card=6 Bytes=468)
4 2 MINUS
5 4 INDEX (UNIQUE SCAN) OF 'PK_TEST' (INDEX (UNIQUE)) (Cost=1 Card=1 Bytes=26)
6 4 TABLE ACCESS (BY INDEX ROWID) OF 'TEST_TABLE' (TABLE) (Cost=2 Card=1 Bytes=78)
7 6 INDEX (UNIQUE SCAN) OF 'PK_TEST' (INDEX (UNIQUE)) (Cost=1 Card=1)
8 1 FILTER
9 8 TABLE ACCESS (FULL) OF 'TEST_TABLE' (TABLE) (Cost=3 Card=6 Bytes=468)
10 8 MINUS
11 10 INDEX (UNIQUE SCAN) OF 'PK_TEST' (INDEX (UNIQUE)) (Cost=1 Card=1 Bytes=26)
12 10 TABLE ACCESS (BY INDEX ROWID) OF 'TEST_TABLE' (TABLE) (Cost=2 Card=1 Bytes=78)
13 12 INDEX (UNIQUE SCAN) OF 'PK_TEST' (INDEX (UNIQUE)) (Cost=1 Card=1)
Statistics
53 recursive calls
8 db block gets
187 consistent gets
0 physical reads
0 redo size
701 bytes sent via SQL*Net to client
508 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
4 sorts (memory)
0 sorts (disk)
8 rows processed
-- The above query is using index PK_TEST. But still it has FULL SCAN to the
-- table two times it has the more cost.
1st query --> SELECT STATEMENT Optimizer=ALL_ROWS (Cost=6 Card=8 Bytes=416)
2nd query --> SELECT STATEMENT Optimizer=ALL_ROWS (Cost=16 Card=2 Bytes=156)
My queries are:
1) performance wise which query is better?
2) how do i make the 1st query to use an index
3) is there any other method to get the same result by using any index
Appreciate your immediate help.
Best regards
Muthu

Hi William
Nice...it works.. I have added "o_id" and "o_no" are in part of the index
and now the query uses the index
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=2 Card=8 Bytes=416)
1 0 UNION-ALL
2 1 INDEX (FULL SCAN) OF 'IDX_TEST_S_ID' (INDEX) (Cost=1 Card=4 Bytes=208)
3 1 INDEX (FULL SCAN) OF 'IDX_TEST_S_ID' (INDEX) (Cost=1 Card=4 Bytes=208)
Statistics
7 recursive calls
0 db block gets
21 consistent gets
0 physical reads
0 redo size
701 bytes sent via SQL*Net to client
507 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
8 rows processed
But my questions are:
1) In a where clause, if "<>" condition is used, then, whether the system will use the index. Because I have observed in several situations even though the column in where clause is indexed, since the where condition is "like" or "is null/is not null"
then the index is not used. Same as like this, i assumed, if we use <> then indexes will not be used. Is it true?
2) Now, after adding "o_id" and "o_no" columns to the index, the Execution plan is:
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=2 Card=8 Bytes=416)
1 0 UNION-ALL
2 1 INDEX (FULL SCAN) OF 'IDX_TEST_S_ID' (INDEX) (Cost=1 Card=4 Bytes=208)
3 1 INDEX (FULL SCAN) OF 'IDX_TEST_S_ID' (INDEX) (Cost=1 Card=4 Bytes=208)
Before it was :
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=6 Card=8 Bytes=416)
1 0 UNION-ALL
2 1 TABLE ACCESS (FULL) OF 'TEST_TABLE' (TABLE) (Cost=3 Card=4 Bytes=208)
3 1 TABLE ACCESS (FULL) OF 'TEST_TABLE' (TABLE) (Cost=3 Card=4 Bytes=208)
Difference only in Cost (reduced), not in Card, Bytes.
Can you explain, how can i decide which makes the performace better (Cost / Card / Bytes). Full Scan / Range Scan?
On statistics also:
Before:
Statistics
52 recursive calls
0 db block gets
43 consistent gets
0 physical reads
0 redo size
701 bytes sent via SQL*Net to client
507 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
8 rows processed
After:
Statistics
7 recursive calls
0 db block gets
21 consistent gets
0 physical reads
0 redo size
701 bytes sent via SQL*Net to client
507 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
8 rows processed
Difference in recursive calls & consistent gets.
Which one shows the query with better performance?
Please explain..
Regards
Muthu

How to make XML element used in RTF PRIVATE/PUBLIC ? I know how to hide columns in RTF, but dont know how to generate the xml in below way. Please help.

Hi
I am following below link to hide/show my columns dynamically. See "Column Formatting"
http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187.pdf
As per doc, element can be made private/public.
<items type="PUBLIC">
<item>
<name>Plasma TV</name>
<quantity>10</quantity>
<price>4000</price>
</item>
<item>
And same can be used to hide the column using condition
<?if@column:/items/@type="PUBLIC"?>
MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?
Below is part of my XML code which I am using in Data Definition for RTF.
<group name="GH3" source="QH3">
<element name="COLUMN_HEAD3" value="COLUMN_NAME" />
</group>
<group name="GH4" source="QH4">
<element name="COLUMN_HEAD4" value="COLUMN_NAME" />
</group>
I am getting output like this.
<LIST_GH3>
<GH3>
<COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
</GH3>
</LIST_GH3>
<LIST_GH4>
<GH4>
<COLUMN_HEAD4>XYZ</COLUMN_HEAD4>
</GH4>
</LIST_GH4>
In order to use logic as per oracle document I want output like this.
<LIST_GH3 type="PUBLIC">
<GH3>
<COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
</GH3>
</LIST_GH3>
<LIST_GH4 type="PRIVATE">
<GH4>
<COLUMN_HEAD4>BLANK</COLUMN_HEAD4>
</GH4>
</LIST_GH4>
What changes I need to make in my XML code to get the runtime output as above? Please help. Where do i need to make changes in the above xml? Group name? Element name?
I am planning to use below condition in RTF template to hide the column, but dont know how to set the type of column as PRIVATE/PUBLIC in the XML output used to populate data in the RTF at runtime.
<?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
Regards,
Swapnil K.

Hi,
Issue has been resolved. I used the value of the element to determine to display it or not.
Regards,
Swapnil K.

How to make a form using a wizard when the table has no primary key ?

Hi,
I want to make a form to update, delete a table. The table has no primary key. The problem is that the Wizard ask for a primary key.
How to avoid using a primary key ? i mean I don't want to create a primary key if is is possible.
I would like to use the wizard; is it possible ?
Thank you for your kind answers.
Christian

I believe the key is choosing 'Interactive' as opposed to 'Classic' in the implementation and then you can choose 'Existing Trigger' for the primary key source and it should work to use an existing column as your proimary key.

Please teach me how to make the arrangement using Code Interface Node.

How is what is necessary just to make arrangement (for example, Sine?Wave)
using Code Interface Node? Please teach me a way.

Try to get hold of the 'Advanced Analyis' library for labview. It contains VIs for doing FFT! No need to reinvent the wheel.
If you can't get it and want to take the hard way, try to learn CIN programming by
- reading the manual (no joke or cynism intended)
- look for advice in NI's developer zone (www.ni.com/devzone) by using the search phrase 'CIN tutorial': you'll get several links which should be helpful in your case.
- better than a CIN: try to use the DLL calling mechanisms and compile your C code into a dll. In order to learn dll intewrfacing for LabVIEW, follow the route explained under point 1 and 2 above...
Good luck,
Franz

ICloud: how to make it a useful tool?

Similar Messages

Maybe you are looking for