ICloud integration causes Outlook to hang when switching to Calendar for a LONG TIME?
I've been working on integrating iCloud (contacts and calendar) into outlook (tried 2007 & 2010). With 3 kids I have to integrate our home and work calendars if we expect to have any chance of remembering anything.
I thought I had found a solution, using the basic windows iCloud control panel and then using a free piece of software from CodeTwo - http://www.codetwo.com/sync-for-icloud/ - which essentially just keeps any of your outlook folders (contacts, calendar, etc) in sync with one of the iCloud generated folders. One way either direction or Two way.
This all worked just fine... except...through process of elimination I found that once the iCloud control panel has generated it's iCloud 'pst' and Outlook is opening it; that Outlook takes an excruciatingly long time (minutes) to switch into the Calendar. I don't see this behavior when switching to Contacts or back to Mail. This persists even if I turn syncing for anything outlook related off at the iCloud control panel, presumably because the iCloud folders are still present in outlook. It isn't until I remove them, that things go back to normal.
Curiously, I'm doing this on two different pc's. One has normal Outlook (local files) and all works fine, while the other has an Exchange Server account, it's the one that's hanging.
windows 7 64bit
outlook 2007 & 2010 (with an exchange account)
iCloud control panel 1.1 (64 bit)
Yes, I do have all the latest updates. I even ran a test where I exported all my appointments out of my calendar, then deleted them off the exchange server. This still didn't help.
I was able to get a coworker to run the control panel on his work PC, and he did not see the problem.
Then, I added the exchange account to my home PC on Office 2007 (our exchange server can do this through the outlook web access server) and then the problem showed up there as well.
All I can figure is that there must be some key difference between my outlook account and his, although I can't imagine what that might be. I'm not inclined to push our IT dept to investigate, it's just not worth the pain of trying to explain the problem to them, just to be told 'we don't support apple products'... i know, i know... just please check this for me.... anyway, not worth it.
I've since rolled everything back into a central gmail account (contacts, calendar) and am using that as the 'cloud' to keep things sync'd. I'm using a relatively cheap piece of software called 'gsyncit' (http://www.fieldstonsoftware.com/software/gsyncit3/index.shtml) and it seems to be doing the job quite well. In reality, this is no less integrated than iCloud since that required an extra service to keep things sync'd as well.
It's highly configurable, so i feel like I have much more control over what sync's to what.. no complaints so far.
thanks for the suggestions and attempts to help!
Similar Messages
-
The latest version of iTunes com addin for outlook cause outlook to hang when exiting
iTunes Version 11.0.0.163 com addin for Outlook causes Outlook 2003 used on a Windows XP machine to not close when exiting. I have verified via the Task Manager that it Outlook does not close. I have gone into Outlook and disabled the addin and Outlook closes properly. Enable it again and Outlook once again does not close. This did not start hapening until I upgraded to the latest version of iTunes. I have both an iPhone and iPad that I need to keep synced with my Outlook calendars, contacts and notes.
How do I get in touch with someone at Apple to report this. I have been all over their website, but cannot seem to find any email or phone number to report software bugs.Hey Gambitv,
Thanks for the question. I understand you are experiencing issues downloading and installing iTunes. The following resource may help to resolve your issue:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Exchange Outlook 2013 freezes when deleting shared calendar for employees who have been removed
Hi,
I am removing users' shared calendars from my outlook 2013 in exchange environment. The problem is, that the shared calendars belong to users who have left the company and have been removed from the domain, this is causing outlook to freeze because i think
it's trying to find the entry then delete it, rather than delete it.
There is no problem deleting a shared calendar for an user who still is in the domain. This seems to be strictly affecting users who have left the domain.Hi,
Generally, if the shared calendar owner is removed from the Exchange environment, the shared calendar which was added before should be removed from Outlook client normally.
Please use Outlook with Exchange cached mode, and make sure the shared calendar was not added in Advanced tab in Account Settings. Please start Outlook in safe mode and remove the shared calendar to have a try.
If the issue doesn’t happen in safe mode, please disable the third-party add-ins one by one to find out the cause.
Regards,
Winnie Liang
TechNet Community Support -
Kernel panic when leaving macbook asleep for a long time
Hello I got this macbook a couple of months ago out of nowhere it started to give me kernel panics and force resting if i left it in sleep mode at night or for any extended time. I would really like to try and fix this my self before having to go and take to the apple store here's my latest kernel panic any help would be wonderful.
Interval Since Last Panic Report: 145789 sec
Panics Since Last Report: 8
Anonymous UUID: 6B3EB739-F3A6-3947-802B-632CC9897A49
Wed Feb 6 15:40:28 2013
panic(cpu 6 caller 0xffffff8003cb7e75): Kernel trap at 0xffffff7f853d52c4, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000218a602d, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xffffff806e712000, RCX: 0xffffff800fc94550, RDX: 0xffffff807ce93a38
RSP: 0xffffff807ce93b60, RBP: 0xffffff807ce93b60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff806e712000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f853d52c4, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff807ce93800 : 0xffffff8003c1d626
0xffffff807ce93870 : 0xffffff8003cb7e75
0xffffff807ce93a40 : 0xffffff8003ccd3bd
0xffffff807ce93a60 : 0xffffff7f853d52c4
0xffffff807ce93b60 : 0xffffff7f853bf358
0xffffff807ce93bb0 : 0xffffff7f853bf2ae
0xffffff807ce93bd0 : 0xffffff7f853904be
0xffffff807ce93c00 : 0xffffff7f842b03c0
0xffffff807ce93c40 : 0xffffff7f842b032f
0xffffff807ce93c60 : 0xffffff7f842b5758
0xffffff807ce93cf0 : 0xffffff7f842ade70
0xffffff807ce93d20 : 0xffffff7f842fe40b
0xffffff807ce93d70 : 0xffffff8004032dbb
0xffffff807ce93dc0 : 0xffffff8004063437
0xffffff807ce93e30 : 0xffffff8003c97fcf
0xffffff807ce93e80 : 0xffffff8003c20aed
0xffffff807ce93eb0 : 0xffffff8003c10448
0xffffff807ce93f00 : 0xffffff8003c1961b
0xffffff807ce93f70 : 0xffffff8003ca5db6
0xffffff807ce93fb0 : 0xffffff8003ccdc23
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f842a4000->0xffffff7f842dbfff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84266000
com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f842 fb000->0xffffff7f8460afff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84266000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f842e7000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f842a4000
com.apple.GeForce(8.0.6)[105BACF2-DA7F-3FD1-8BD0-61941FEC6BDD]@0xffffff7f8538f0 00->0xffffff7f85453fff
dependency: com.apple.NVDAResman(8.0.6)[6DE39FFA-F7E3-3EF5-AF75-43F2A69F6288]@0xffffff7f842 fb000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[6A1A36AC-2F79-34AF-A162-A97FE16705E3]@0xff ffff7f842e7000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84266000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[2E420A99-8DBF-3C1D-AE39-75B7EE4D5C1E]@0 xffffff7f842a4000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12C3012
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 16:32:48 PDT 2012; root:xnu-2050.20.9~2/RELEASE_X86_64
Kernel UUID: 0AFA55FD-872F-3BBE-8630-214EB586A16D
Kernel slide: 0x0000000003a00000
Kernel text base: 0xffffff8003c00000
System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
System uptime in nanoseconds: 55277712049
last loaded kext at 28468700095: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f855de000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.ntfs 3.10
com.apple.iokit.IOBluetoothSerialManager 4.1.2f9
com.apple.driver.AGPM 100.12.81
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.3.5fc10
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.5fc10
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleHDA 2.3.5fc10
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOBluetoothUSBDFU 4.1.2f9
com.apple.GeForce 8.0.6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.13
com.apple.driver.AppleIntelHD4000Graphics 8.0.6
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleIntelFramebufferCapri 8.0.6
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.nvidia.NVDAStartup 8.0.6
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.2.13
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyEventDriver 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.0
com.apple.driver.AirPort.Brcm4331 612.20.14
com.apple.driver.AppleSDXC 1.4.0
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.iokit.AppleBCM5701Ethernet 3.5.0b9
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 1.5.1
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOSurface 86.0.3
com.apple.driver.DspFuncLib 2.3.5fc10
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOBluetoothFamily 4.1.2f9
com.apple.nvidia.nvGK100hal 8.0.6
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.NVDAResman 8.0.6
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.IOPlatformPluginFamily 5.3.0d47
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.driver.AppleHDAController 2.3.5fc10
com.apple.iokit.IOHDAFamily 2.3.5fc10
com.apple.driver.AppleGraphicsControl 3.2.13
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.1.8
com.apple.iokit.IO80211Family 510.4
com.apple.iokit.IOUSBUserClient 5.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.3 GHz, 4 GB, SMC 2.1f170
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.14)
Bluetooth: Version 4.1.2f9 11046, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 6
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 4That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault
An obscure bug in OS X
You can rule out the first two possibilities by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it as directed in this support article.
If you've recently upgraded the memory, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts on the memory modules when handling them. If necessary, clean them with a mild solvent such as rubbing alcohol.
The Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Otherwise, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
Hello,
In 2014, I am expecting to be out of the states for a long period of time which is over 3 months. I am not planning of bringing my MacBook Pro with me. As a result, what would be the correct procedure for the battery in order to preserve it in the best condition when I return back and use the battery normally.
Many thanks for your assistance!This is the article for non-Retina systems. Not sure what to do fro Retina units:
http://www.apple.com/batteries/notebooks.html
I would also keep it with a friend/familymember you can trust to not take it out during that time and play frisbee with it to control humidity levels and temperature and access while unattended. -
Outlook 2010 hangs when opening older calendar items
Hi,I have a really odd issue.One user has a bit of a vague issue - where Outlook 2010 (32 bit, on Windows 7 64) freezes up (not responding) when user is trying to open a calendar item he has created himself in a group calendar also created by himself.So, a quick google search finds, besides a lot of advertised non working items, in general tips like "check mailbox size" (User is at 70% of allowed size, where allowed size is a mailbox of 1GB)Or, run outlook in safe mode to see if any add in or plug in causes this. Sadly - in safe mode exactly the same happens - Outlook stops responding.No other user has the same "owner" rights on this calendar, so it`s hard to reproduce.And now for the really odd one - any item listed before June 1st (2015) causes the issue. Any item from June 1 and onwards opens as it should.I have difficulties wading...
This topic first appeared in the Spiceworks CommunityHi JW_IC,
Does this issue occur OWA?
If OWA not hangs, it seems an issue on the Outlook client side.
I found that you have done all operations on the Outlook client side and still not worked.
How about following the error message, "To see if more information about the problem is available, check the problem history in the Action Center control panel",
to check the problem in the Action Center control panel. Please paste the details without sensitive information for the further troubleshooting.
I suggest updating Outlook 2010 to the latest version for test.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Unplugping power when away from Mac for a long time
I finally got an APC UPS for my G4 dual 450 and my 3 external LaCie HDs (one of which runs Tiger and is my startup disk).
In the past, (before UPS) when we traveled for weeks to months at a time, we unplugged all the computer stuff even though everything IS plugged in to surge protectors. Better safe than sorry.
Now, I wonder how to unplug.
I assume the sequence to be with the computer off and the HDs therefore off as well, turn off the power on the UPS and then unplug it from the wall outlet. But - will the UPS's internal battery still be running something in the G4 (that little battery that keeps the memory going?) and will this run down the UPS battery so much that I should unplug the computer from the UPS as well?
And does it shorten the life of the UPS battery if it is left unplugged for a month or so? (or does this in fact work to my advantage, since APC says the life of the battery is shortened by numerous power outages (which we don't have anyway!)
Mrs HHi, Mrs H -
Expanding a bit on Jeff's comments...
Lightning seeks ground. It may travel on anything conductive, even leaping from one path to another, but what it is seeking is a connection to ground. Turning a computer and its peripherals off does not interrupt their ground connection; ditto the UPS and any other normal surge protection devices. The switches on all of that equipment interrupt only the power (hot) leads, not the ground connections.
The only way to interrupt the ground connections reliably is to unplug everything. One advantage of using a UPS and/or surge protector strips is that it makes interrupting the ground connection easier - just unplug the UPS and/or the surge strips from the wall outlet.
However, that is not quite sufficient: it is also necessary to disconnect any internet connection. Unplug the phone wire for dial-up or DSL connections, or the cable for cable broadband connections.
I had first-hand experience with such a few years ago. I was pushing the envelope, thinking I had some time yet before a coming electrical storm got close enough to be of concern. While I was using the computer, lightning struck a school across the street. A stray twinkle of lightning passed through my home office, about two feet in front of me (I say 'twinkle' because it was midday and that's all my eyes were able to register).
The computer immediately displayed a message that it had lost communication with a firewire drive, then froze. First thing I did was a force-restart, which was successful - even the firewire drive referenced in the message was back.
What was not back was ethernet - no comm with my printer or the internet. After a bout of testing I isolated the problem - my ethernet hub and one ethernet cable were fried. Nothing else was damaged. I had spares for both on hand, so was back to normal a few minutes later.
Having learned the lesson relatively painlessly, I now unplug everything much sooner when such a storm is impending. -
Proxy Server "freeze" when are not request for a long time
hi... i have the followin problem that i can't find a solution yet..
my context are:
- sun java web proxy server v4.0.5
- sun java one directory server where i have my users that can use proxy
- between this servers i use a self signed certificate
the problem are (history):
- i start the server and star a browser, they ask for user and pwd; i give them i all ok
- i can acces www without problems
- i finish my work i go to home, but the proxy is keep running (but nothing are using
them)
- when i come again to work, i start the borwser and the proxy ask for user and pwd;
i give them, but they keep to give the browser default page without results.
i can only make the proxy serve works again is restarting them.
i my acces log i have the following when i can try to connect and don't work:
100.0.4.145 - [24/Aug/2007:08:11:55 -0300] "GET http://www.google.com/HTTP/1.1" 407 - - - - - - - - - -
i my directory log i dont have request at this time
how could be? :(
thanks in advancehi... i cannot resolve this yet, but i can see http headers when this problem happens...
for example:
URL:*{color:#000000} http://www.google.com/{color}*
Request: GET http://www.google.com/ HTTP/1.1
Host: www.google.com
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.5) Gecko/20041215 Firefox/1.0 Red Hat/1.0-12.EL4
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Proxy-Connection: keep-alive
Cookie: PREF=ID=7ed5b832324f7935:TM=1159373905:LM=1187742924:GM=1:S=xYVfSPR3P8b-qCLa; GTZ=0; rememberme=false
Response: HTTP/1.x 407 Proxy Authentication Required
Server: Sun-Java-System-Web-Proxy-Server/4.0
Date: Tue, 18 Sep 2007 11:13:41 GMT
Content-Length: 146
Content-Type: text/html
Proxy-Authenticate: Basic realm=""
Connection: close
so...i look in specification about http 1.1 (rfc2068) (if i not wrong), when the server receive a request that needs authentication of the client he response whit a "request" of these autentication, so the client send them...
i think that these response about the server needs that the client need autenticate is in the response with http code 407, but in rfc says that the parameter Proxy-Authenticate are like Proxy-Authenticate: Basic realm="string_here" where "string_here" is a id defined by server.
So.. the string in "realm" ¿should not be diferent from empty (null) ? :(
Thanks in advance :) -
Remove battery when not in use for a long time?
Hi, I went overseas and accidentally left my Macbook behind, but brought my charger along. My Macbook had very little battery power remaining when I left (less than 20%) and since I have the charger with me, nobody at home can help me charge my Macbook. I'll be away for quite a few weeks, should I get someone at home to remove the battery for me? Thanks.
MacBook Mac OS X (10.4.8)Was the computer turned off or asleep? It won't hurt to have it taken off. Normally I wouldn't worry about it unless it was going to be a few more months.
Mort -
I need help! if i am browsing the internet and my screen is open...it will go black.....i have to close the computer and reopen it to get it to work.
Press anything on the keyboard.
(61870) -
Oracle 11gR2 alter database open hangs for a long time
Hi,
We are cloning oracle apps database with RAC to non-RAC. We did the ORACLE_HOME clone and then duplicated the database with rman.
It completed successfully.
While trying to bounce the database, the db startup option hangs at "alter database open" for a long time
There are no errors in the alert log file. It just waits at "alter database open"
Please help and thanks in advance.
Regards
SasikalaThese are the lines in the trace file
Instance name: stdby
Redo thread mounted by this instance: 0 <none>
Oracle process number: 9
Unix process pid: 434204, image: oracle@developmentDR (MMAN)
*** 2011-01-31 09:32:40.713
*** SESSION ID:(208.1) 2011-01-31 09:32:40.713
*** CLIENT ID:() 2011-01-31 09:32:40.713
*** SERVICE NAME:() 2011-01-31 09:32:40.713
*** MODULE NAME:() 2011-01-31 09:32:40.713
*** ACTION NAME:() 2011-01-31 09:32:40.713
def_comp: comp id 7 bp state 4
And I din try opening the db with resetlogs. Do you want me to do that?
thanks -
On my PC running windows XP Service Pack 3, iTunes 11.0.3.42 causes it to hang when attempting to view a .MOV (1.6 GB) requiring a cold boot. What could be causing this? Corrupted .MOV? Too little RAM? It successfully plays a 162 MB .MOV.
Hello David,
Thank you for providing all that information about the iTunes issue you are experiencing. We would first want to rule out any software issues before we can determine if it has to do with RAM. I found an article that will help you isolate and troubleshoot software issues that could be causing iTunes to behave this way:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
I hope this helps you get back on track with watching movies in iTunes!
Best,
Sheila M. -
Screen of my desktop hangs when switching to other desktop or mission control
Screen of my desktop hangs when switching to other desktop or mission control. There is tearing of graphics while switchin to different desktops or mission control or while scrolling a webpage. I wish to know the problem and its solution.
I have a Mac Pro 13' and I am using OS X Mavericks.
-
Hanging when switching between programs?
Is there a soluton to programs hanging when switching between one program to another?
Safe Mode deletes some system caches that may help..
Startup your Mac in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu then try switching between applications. -
My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running. Does anyone know the cause & remedy please?
Your points match mine pretty well,though here are some thoughts:
1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
4. That matches my experience.
My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.
Maybe you are looking for
-
All of a sudden can't print to my printer
I'm running Acrobat 7.0.9 on a MacPro with OS 10.4.11. Everything has been working fine and then, today, I scanned a 13 page document as one document using Epson Scanner and saved it as a PDF out of my printer choices. I opened the pdf file. Everythi
-
Problem in displaying images one by one in JList
I have a problem in displaying images one by one in Jlist. I want to show 100 images as a thumbnailview in jlist but it is talking too much time to show all the images after scalling 100 images to thumbnail view and making it into ImageIcon. So, i th
-
I have a CommandButton with rendered attribute to display it depend of the step in a bussines process. The JSF Page have a request scope then all flags need to be recalculate each request (The page is reloaded severla times to complete the process, t
-
Regarding Creating Participants to a Role in one go.
Hi, Is there any way through which multiple users can be created at the same time for a specific role in BEA Aqualogic BPM Studio/Enterprise server. If there is one, please let me know Regards, Abhishek M
-
Hi, I have just purchased a nex Cisco pix 501 firewall and i have installed these certificates it asks for. Now the situation is that the certificates have been installed but this stupid thing won't even goto the PDM window.it just tell me that