ICloud not working on iPad 4 Gen after upgrade

iCloud is not working on my iPad 4 gen after upgrade to iOS 8. I have Yosemite beta and iCloud works on my iPhone, windows 8 and of course my mac with beta Yosemite. Does anyone else have a similar issue.

Reset iPad and the problem cleared up for now.

Similar Messages

Auto Rotation not working on ipad 2 after upgrading to ios 6.0.1

Hi
I just upgraded my ipad 2 to ios 6.0.1 . Auto Rotate is not working ..I have tried to reboot(Pressing home and sleep button together.. I also noticed that red striker not appearing while doing it )
Also I made sure Lock Rotation is off.
Please help me..
Thanks

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant.

Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
It always says call back ...
incoming is working
i tried number of sim cards from different networks but same issue
tries resetting network settings but it also didnt worked

Just counter-check the following settings.
1. Settings>General>Set Side Swith To: Rotation Lock
2. Make sure side switch is not in lock position
3. If necessary do a reset a few more times

Screens not working in ECC 6 after upgradation from 4.6c.

Hi,
The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
Regards,
jinesh kumar c.

Hi,
Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
Because some times we get Dynpro errors for transportation of the screens.
Reward if useful.
regards,
Anji

Page Forward & Reverse buttons do not work & are "grayed-out" after upgrading to, as is the Main-Menu Items such as File-Edit-view etc...

After upgrading to Firefox 3.6.12 all functionality appeared to be intact. Then after a few days it lost the ability to "page forward" or to "page back" and are "grayed-out". Additionally, the Main menu items such as File, Edit, View, History, Bookmarks, Tools & Help are also grayed-out and non-functioning.
Also, the "Search Window" does not search, Web Searches need to be performed from within the URL window instead, for some crazy reason. If the URL window is blank when I enter a search into the actual search window the following appears in the URL window, "Search Bookmarks and History", which makes no sense.
I have noticed similar complaints in this Forum in the past but I have not seen any posted resolution to these issues. Is there a solution?

Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Universal Worklist UWL not working in NW04s SPS9 after upgrade from NW04

Hello all,
this is just a hint in case anyone has the same problem with the UWL.
It happened to me in 2 cases, that in a Portal 7 SPS9 the UWL only showed a blank page after upgrade from NW04. In NW04 the UWL worked.
The reason for it was something like a corrupt deployment (but there were no according error messages in any log files). The SAP Support told me to redeploy the UWLJWF*.sca according to note 895523, that worked.
You can check whether the deployment is the reason of a non-working UWL setting the property "Launch Web Dynpro UI" to 'no'. Then the old HTMLB sources (that should work) are used (But it is not recommended to use the old sources anymore)
Kind regards
Andreas

.. just a hint ..

"Allow insecure authentication" not working on mac mail after upgrade to Yosimite

I recently upgraded to the new Yosemite OS. Since then, I have not been able to access my ISP's IMAP server. After spending time troubleshooting with the service provider, it seems that the "allow insecure authentication" feature is not working. The password appears to be sent as a series of "*" which the server can not recognize and I fail the login. It is of note that I am still able to access this email account through my iPhone 4S with all the same settings and had no issues before the Yosimite upgrade. Is there anyway around this issue?

I had the same problem. Rebooting the computer fixed the issue for me.

Peer-to-Peer Airplay not working with iPad (Gen. 3)

I'm in the process of testing "wireless projection" solutions. Since I have access to an iPad (gen. 3), iPad Retina, iPad Air and iPhone 5c all running iOS 8.0, with a pair of Apple TV's, Model 1469, one ATV a wired connection and one ATV no network connection at all. Both devices were updated using Configurator to get the activation setup.
Once activate, they were then set up in their respective locations, and the settings were verified (i.e. airplay is on, networks are connected/disconnected as required) and tested using each of the iOS devices listed above.
All 4 iOS devices could see the networked Apple TV as expected. But the Gen 3 iPad was the only device that didn't pick up the Peer-to-peer Apple TV when testing the standalone unit. I tried to reset the iPad, turned off and on the radios, but the device will not pick up the PTP ATV.
Has anyone else had any luck getting a Gen 3 iPad to work with the Peer-to-Peer with out a network?
According to the following KB, Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch, you should be able to use a 3rd gen iPad to peer to peer airplay.

iPad 3rd generation doesn't support Peer-to-Peer Airplay. Apple quietly said it was for iOS devices introduced in LATE 2012. Like for Handoff; certain devices with the latest Wi-Fi specifications can get this feature. The iPad 3 was introduced in EARLY 2012. I tried, but it didn't work. Here is what I found in the Apple TV Section.
AirPlay requires an Apple TV (2nd generation or later) with an iOS device running iOS 4.3 or later or a Mac with iTunes 10.2 or later. Some features require the latest software.
Peer-to-peer AirPlay requires a Mac (2012 or later) with OS X Yosemite or an iOS device (late 2012 or later) with iOS 8; and an Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later.
AirPlay Mirroring is available with iPhone 4s or later; iPad 2 or later; iPad mini; iPod touch (5th generation); and iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), MacBook Pro (Early 2011 or newer), and Mac Pro (Late 2013) with OS X Mountain Lion or later.
Dual-screen capability is available with iPhone 4s or later, iPad 2 or later, iPad mini, and iPod touch (5th generation).

Camera not working and light blinking after upgrade

After upgrading to Mavericks, the built-in camera on my MacBook Air (mid-2013) has stopped working in all applications. When I start an application that uses the camera, the image does not appear, and the camera light blinks rapidly until I close the application. Console shows the following messages:
11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_off_hardware
11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_on_hardware
11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4FSM.cpp, 452: FlowIC00: MIPI error (interrupt source = 0x8)
11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4.cpp, 2503: FlowIC00: Perform error recovery (1).
The latter two messages repeat until I close the application.
This is not the same problem as the Skype camera issue that was resolved with a previous update. I have tried resetting the NVRAM and PMU, reinstalling Mavericks, and using the guest account.
This user has the same issue: https://discussions.apple.com/message/23721483#23721483
Any help would be greatly appreciated — I would really like to have my camera working!

Hello grmurchison,
Thank you for providing the details of the issue you are experiencing with your built-in iSight camera. You have taken some really great steps to isolate and troubleshoot the issue. I found an article with a couple of additional steps (you can skip the steps you have already taken):
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

Facetime is not working in Ipad 2 after updating IOS5. I can't receive and transmit calls. Facetime uin the setting is on.

Ipad 2 WiFI + 3G, Facetime is not working after updating to IOS5. The facetime in the setting is turned on. I can't received and transmit calls.

I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

Home button not working on iPad 2 after iOS5.1.1

I got iPad 2 updated with ions 5.1.1
It worked fine for a week and now the home button does not work. I followed all posts here to reset, restore etc. but nothing helps. This is already a replacement iPad I got for my previous non functional iPad 2 which had battery issues, which apple swapped in store last week.
Any advice ?

Update -
Called apple support and did not get steps to try and was asked to visit apple store. Went to apple store and since the problem is intermittent they did nothing.
Now the problem is back.
Also, I notice there are lot of Low memory diagnostics logs which I thik may be leading to home button not working BUT that iOS should handle as part of memory management. I restarted iPad 2 and still memory issue/ home button not working which seems weird
I am really disappointed and not sure how to get this addressed.
Apple, please help!

Some Calculations are not working in Discoverer 10g after upgrade from 4.1

Hi Gurus,
We are recently upgraded Oracle Discovere 10g from 4.1, some calculations are not working in Discoverer 10g. I appreciate if you could fix below calculation(s) in 10g.
CASE WHEN TRUNC("Expenditure Item Month") = '31-JAN2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '28-FEB-2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '31-MAR-2007' THEN SUM(Wtd Qty A) END
Thanks & Regards
Vikram

Sabra,
Not sure exactly what this might be... there could be an issue there.
Please make sure that you review the upgrade.log. Are there any errors / warnings?
Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
Later you may wanna open a Service Request into the Oracle Support.
I hope it helps...
Cheers,
Pedro.

Ipad/Mac not working with Bose Soundlink after upgrade to Mountain Lion

Since upgrading to Mountain Lion, I can not play through my Bose Soundlink from my Mac and iPad? It finds the device via Bluetooth, connects, but will not play.Anyone else?

Try to reset the Soundlink. To do this just press the "mute" button for 10 seconds... when all indicators lights appears release the button and you are set.
Just try to connecto again.
Hope it works for you as it worked for me.
Best,

Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

Hi,
Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
In order to make mails workin' I need to be connected to a Wifi network.
All setting are correct on the phone.
How can I fix this **** issue.
Deleted the icloud account already and added it again but that does not help.
Also when I try to connect to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
The password is correct.
Please help me.
Jerry

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

ICloud not working on iPad 4 Gen after upgrade

Similar Messages

Maybe you are looking for