ICloud only synchs the top level of my bookmarks (IE Win 8.1)

Many of my bookmarks are sorted into sub directories, they do not appear on my PC. However, the directories themselves do, and any bookmarks I make on the mac in Safari in the top directory DO show up in IE.
I tried searching the forums but couldn't find a similar problem. I tried all Apple's iCloud troubleshooting tips, including reinstalling the control panel, but no change (i delete everything from the PC and the empty directories are copied back to my Favorites folder). I also disabled virus protection / windows defender for the Favorites folder, no change.
I didn't see anything quite like this in the forums already - does anyone have any ideas?
I am running Windows 8.1
UPDATE: I just thought to try adding a bookmark in a subdirectory on windows and it DOES synch back to the mac. But still not mac -> PC.
Message was edited by: rdyornot77

Please don't tell me I'm the ONLY one with this problem!
Anyone? If you don't know how to fix it, we could at least comiserate.

Similar Messages

  • SMB file sharing with WinXP - only see the top level directory

    What is going on here, I can't see the files under sub-folders from OS X 10.3.9? I use admin id connect to WinXP share drive.

    ezhangin wrote:
    If I go in as guest all I see is the Public folder and if I log in as an admin account (such as myself) it shows the entire HD plus all the share points I had specified. This does not help me however as I want the shares to show up for everyone on the network (without logging in as me).
    Ignoring the obvious potential security issues, in the Sharing preference pane, it indicates that administrators can access all volumes. I don't have my Windows box running, but I just logged in from my other MBP. If I log in using a standard account, all I see are the public folders; however, when I log in to one of my admin accounts, I have access to the entire machine.
    I do recall having some issue with XP logging in as an admin on this MBP and not seeing anything but the shared folders, but with the other Leopard box, it works as expected.
    One caveat is that I cannot see any other user's folders, only those belonging to the user I am logged in as. But this is true even on the same machine - even an admin cannot casually browser another user's folders. They have red x's on them.
    I do not believe WINS is a problem in this case because the same issue shows up with AFP and SMB, but I appreciate the help.
    I agree it's not a WINS issue.
    Message was edited by: nerowolfe

  • 0CO_PC_PCP_03 Cost Estimate Itemizations at the top level

    We are wanting to use extractor 0CO_PC_PCP_03 to extract the itemisation behind a cost estimate (The data in table CKIS). The issue with the extractor is that it breaks a multilevel BOM  down to the basic levels (ie, itemisation explosion). However we want to have the data at the  top level as it is displayed in a cost estimate itemisation. Is it possible to get this extractor to only extract the top level of the itemisation without further explosion of detail.
    Thanks
    Geoff ARmstrong

    I have the same problem now.
    I plan to create a generic datasource and extractor is a function module which is originated from KKBW_PCP_ITEMS_GET_ITEMIZATION.
    Do you have got a better way now?

  • Show a menu of roles in the Top Level Navigation

    Hello,
    Imagine a scenario where a user has many roles assigned to him (say 40 roles). In that case the user will have 40 tabs in the first level of the top level navigation and by default a horizontal scroller appears on the right part of the screen clicking on which the roles will scroll horizontally. If the user has to go to the 40th role he has to click quite a lot.
    Is it possible to have a menu option clciking on which we get the all the list of roles in the top level navigation in a vertical list and we can directly jump to any role clicking on the entry in the list ?
    Something like what we get in a tab strip in Web Dynpro.
    Thanks in advance for your valuable inputs.
    Sundeep
    Edited by: Sundeep Sethi on May 3, 2011 3:00 PM

    Hi,
    Yes it is possible to have menus as you wish .
    Look at the following links
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6066b302-09c8-2a10-a894-eb9fef30df85
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a1aea5-a2d1-2a10-c6bc-953bdadfdcb8?QuickLink=index&overridelayout=true
    You need to work on navigation tag libraries to extend number of levels .
    The above inks helps you only for single level of navigation.
    Regards
    Karthiheyan M

  • How can I choose to save a download straight into a sub-folder, rather than just a folder at the top level?

    I have altered my preferences on firefox so that it asks me where I wish to save a file I am downloading, but when it opens the box for me to choose the location, only the top level of files is offered (i.e. documents) and not more specific files that are within that file (i.e. pay slips). How can I access these other levels directly? At the moment, I have to save to the desktop and then transfer to the appropriate file later.
    Thank you.

    Hello,
    I think you are looking for this:
    https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file

  • How to load data only at the upper level in ASO

    We are loading the Days member with values 31/30/29/28 for the top level combinations in Block storage cube using a rule file.<BR>Now we need to carry out the same thing in ASO but ASO has a constraint that we can load data only at zero level.<BR>If we do that, then data at higher levels, after aggregation is incorrect. What can be done ?

    Also possible but a little more complicated is to create a separate cube with a DayCount account and only accounts and time dimensions. The time dimension goes down to day. You load it with 1 record per day. Then, you use this cube and your original cube as source, transparent partitions to a BSO cube. <BR><BR>This way, you have no bogus "input" members anywhere. Formulas that combine DayCount with other things would be written as outline formulas in BSO, since it doesn't support MDX. If you need those to be in MDX, then this wouldn't work for you.

  • How to hide name of Role from the top level navigation of the portal

    Hi Experts,
    In my project, I have created 2 roles Role A and Role B. These roles have been assigned to User X.
    When user X logs in, he is able to see name of role that is 'A' in the top level navigation.
    As per the requirement, user X should not see the 'A'.
    Rather user X should see following:
    Top Level Navigation: 'My Work'
    When user clicks on 'My Work', he should see
    'My Sub Work1' and 'My Sub Work2'.
    After that under 'My Sub Work1' user should see following
    All Objects of Role A
    All Objects of Role B
    Name of role i.e. 'A' or 'B' should not be displayed at all at any place in navigation.
    Only whatever objects  has been assigned to Role A and B should be displayed in detailed navigation area.
    Can you please let me know how to achieve this?
    Pictorial Diagram:
                      My Work       (In top level navigation)
    My Sub Work1    My Sub Work2    (In top level navigation)
    _________Objects of role
    A
           |
           |_________Objects of role
                                   B
    Please note that 'My  Work' and 'My Sub Work1' and 'My Sub Work2) are not roles. They are just the name of folders.
    Can you please let me know how to achieve it?
    Regards,
    Brian

    Hi Brian,
    Try the following steps.
    1. Change the 'Entry Point' property of Roles A and B to 'No'.
    2. Create a role folder called 'My Work' under A and B.
    3. Set the 'Entry point' property of this folder to 'Yes'.
    4. Set the 'merge id' property of the folder as "mywork" (or any other string) under both roles A and B.
    5. Under 'My Work' in Role A,
    a. Set the 'Merge Priority' property to 50.
    b. create subfolder 'My sub work1' and create all your objects.
    6. Under 'My Work' in Role B,
    a. Set the 'Merge Priority' property to 100.
    b. create subfolder 'My sub work2' and create all your objects.
    7. Make sure the user is assigned both the roles A and B. Only then he/she can see objects of both the roles.
    8. One thing to remember while merging folders is that, all the entities that are being merged should be at the same level. For eg: in our case, you cannot merge 'my subwork1' in role A, with 'my work' in role B.
    Reward points if helpful.
    Regards,
    Priya

  • How do I keep folder settings below the top level

    There's a certain Finder setting I prefer for folders regarding icon view. I use a size and arrangement that works very well for me. After replacing my older MacBook Pro with a new MBP and transferring all my data, the setting I prefer only works at the top level of any given folder. Any enclosed folder needs to be individually set to my preferred settings. Is there a universal setting in the Finder for folders that will include all enclosed folders?

    There's a certain Finder setting I prefer for folders regarding icon view. I use a size and arrangement that works very well for me. After replacing my older MacBook Pro with a new MBP and transferring all my data, the setting I prefer only works at the top level of any given folder. Any enclosed folder needs to be individually set to my preferred settings. Is there a universal setting in the Finder for folders that will include all enclosed folders?

  • Passing data from a subvi to the top level with continuously running loops

    Hi All,
    This is a very simple question, for some reason the data available at a subvi indicator is not making it to the top level vi. I think it might be something to do with the while loop I am using but I cant figure it out, any help will be appreciated. I don't think I fully understand how the data gets out of a continuously running loop.
    GPSdisplay runs a driver called GPS.vi (im not worried about my event structure just yet which might be wrong, but I am yet to test that bit yet) Probe 1 should have the values from GPSCluster
    Loop within GPS.vi. GPSCluster (Probe 2) is being updated correctly
    I cant work out why the data is not being passed to GPSCluster in the top vi
    Solved!
    Go to Solution.

    Hi bennymacca,
    I think you are on the right track with an FGV. You can do this fairly easily with the GPS vi that you have.
    Before I go any further, your GPS while loop will only return the last reading, and because the "Read" boolean output state is FALSE, it will not stop. Do you see it exit at all? From the logic I read, once entering this while loop it won't stop until told to.
    There are a 3 options you can try.
    1) Use an FGV, as you are looking into. To do this you will need to change the state boolean to TRUE and put shift registers in for the GPSCluster - to parse the information around, holding it each time the vi is called and exited. Outside the while loop you will wire up the Cluster to the indicator that you wish to collect (OR, you could have it inside the case statement where it is read - be careful here, though). 
    2) in the main code, above the sequence frame you can place the GPS vi while loop (the "Read" one), having the state boolean wired to a Stop button local variable. This while loop will start depending on how LV feels, so wire an error line to both the While loop and Frame start (indicating that both are to run in a parallel fashion), OR you can put it in a case statement and say 'go' when you want to start reading. With this while loop, you can then output the Read data directly into your Cluster variable as it is generated.
    But, with (2) you are moving yourself away from the purpose of the GPS vi, which would be to bring all functionality of the GPS functionality into one sub vi - which is a good idea.
    3) put a condition on the "Read" case statement boolean state - only make it TRUE when you wish to stop reading data (do you have a time or condition you can refer to here?). Even doing so, you would/may still need shift registers on your while loop to retain data for each iteration.
    I hope all of that helps. Cheers. David.

  • How to change the order of the top level navigation?

    hello,
    i don't find where i can change the order of the top level navigation.
    help would be great because there is no documentation for this issue.
    greets daniel

    If you want to define the sequence of the entry points for display in the portal, you can prioritize the entry points. You define priorities for the entry points by assigning a cetain value to each of the entry points in  the SORT PRIORITY. You may only define values greater than 0 for the priorities  and lower than 100 (default value is 100.0). The smaller the value of the entry point, the further left it moves on the navigation bar. The entry points without a priority appear in any order.
    Hope that helps,
    Frank

  • How make the Top-level Navigation and Content Area in one page as a whole?

    I want to make the Top-level Navigation and the Content Area in the one page as a whole displayed in user interface.In the default framework,the Top-level Navigation and the Content Area were contained  in 2 pages, So the vertical scroll bar could only control the Content Area. I want to control the full page with  one vertical bar like the page of "www.sdn.sap.com" Web.

    Hi Jianguo,
    One advantage of the external facing portal solution (SP14) is that the framework page is displayed in a single frame. Perhaps this could be of use to you.
    Hope this helps.
    Daniel

  • Did 10.6.5 alter the permissions of the top level of the startup volume?

    Since applying the 10.6.5 update it seems that non-admin users have read/write access to the top level directory of the startup volume. That means that non-admin users can create items there.
    I am wondeing if this is a normal change for 10.6.5 or if something is weird with my system.
    We updated from 10.6.4 via Software Update. This machine has only ever had Snow Leopard installed on it.
    (Note that top level sub-folders such as Library and System do not appear to be affected by this)

    Are you referring to the ownership and privileges for the drive? If so then if they aren't set at the default it's because of something a user has done because the installer makes no such changes. You can return them to the default as follows;
    1. Select the drive and Press COMMAND-I to open the Get Info window.
    2. In the Ownership and Sharing section at the bottom is a checkbox labeled, "Ignore permissions on this volume." If the box is checked then click on the lock icon and authenticate. Uncheck the box.
    3. Open the Terminal application in the Utilities folder and enter the following command then press RETURN:
    sudo chown root:admin "/Volumes/Macintosh HD"
    You will be asked to enter your admin password which will not be echoed.
    If you now click onto the still open Get Info window you should now see the proper info:
    Owner=system with r/w privileges
    Group=admin with r/w privileges
    Everyone is read-only
    Click on the lock icon to prevent any changes. Close the window then quit the Terminal.

  • Drag & drop stops working when I drag outside the top-level window

    I have implemented drag & drop in my application, using the pre-JDK 1.4 approach. It works fine until I drag outside the top-level window, then back in again. My drop target receives a dragExit, but doesn't get a dragEnter when I drag back in. It then gets frequent calls to dragOver - but the DropTargetDragEvent says there are no DataFlavors available.
    Is this a known problem with d&d? Is there a known workaround?
    Thanks
    - rick cameron

    I could really understand that it annoys you. I tried it on my machine and the "save as" dialog box is placed correctly. I couldn't pull the box out of the monitor because the menue bar keeps me under it.
    Do you have the application frame activated? Try turning it off. "window > application frame"
    The problem might be here: The behaviors of the menu bar and dock are adjustable. Go to the system prefs and try playing around with the Mission Control settings. At work I have menu bar and dock on both monitors. At home I set the prefs so that only the main screen has menu bar and dock.
    I'm just guessing. Don't beat me if this doesn't help.

  • [svn] 2877: Added a "flex4-compile" target in the top-level Ants script for easily recompiling flex4.swc.

    Revision: 2877
    Author: [email protected]
    Date: 2008-08-18 18:15:18 -0700 (Mon, 18 Aug 2008)
    Log Message:
    Added a "flex4-compile" target in the top-level Ants script for easily recompiling flex4.swc. It is similar to "framework-compile" and "airframework-compile".
    Reviewer: N/A
    Bugs: -
    QA: No
    Doc: No
    Modified Paths:
    flex/sdk/trunk/build.xml

    In the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
    To allow your vhost you should add /data/www or set empty value.

  • Connect by - find the top level by pasing in any other level

    I have a connect by loop.
    select  parent,
    child
    from parentchild
    start with parent = :passed_in_parameter
    connect by nocycle prior  child = parentThis works fine but i have an addiitional requirement to find the top level of this tree. By passing in any other level.
    i.e.
    if i have data as follows:
    parent child
    1 2
    2 3
    3 4
    4
    hierachy
    1
    2
    3
    4
    Then I need my query to always give me the value 1 (top level) even if i pass in 1, 2, 3 or 4.
    Hope this makes sense
    Thanks

    Hi,
    ngac_auk wrote:
    ... Im trying to prevent a continous loop problem (connect by error) by checking the entire tree (as there can be as many levels as they require) for the entry the user is trying to sabe and if the entry exists then prevent them from adding the new parent child entry.
    I thought the best way to do this is by first establishing the top level of the tree (hence my original question) then use another query passing the top level in, to ensure the new entry they want to put in does not already exist.
    Is this the best way of doing what i reauire or can people think of a better solution?If there is a loop, then it isn't a tree, and there won't be a top. That's exactly what a loop means: every member of the loop is the ancestor (and descendant) of every member.
    Sorry, I don't know enough (yet) about your application to answer your question.
    Whenever you have a question, post a little sample data, and the results you want from that data.
    In the case of a DML question (like this one: how to prevent DML that causes a loop) post some INSERT statements that show the table without any problems.
    For the results, post a series of DML statements (INSERT, UPDATE and or DELETE) to be executed in order, and say whether you want each one to fail or not, and why.
    Make sure your sample data resembles your real data. For example, if your real table allows children to have more than one parent, make sure your sample data has an example of that.
    There's no need to post a lot of data. If your real trees can go to 50 levels deep, you can post a tree that only goes 3 or 4 levels, and just explain that they can actually go deeper.

Maybe you are looking for