ICloud rules no working after down time today...

All the rules I have set-up stopped working this morning while the iCloud servers are down. I delted ALL of them and started adding them back - However, now they dont work at all. All the rules I enter are being ignored? I'm doing exactly what I have always done....Any thoughts? What's going on?

We don't have any information on models from Toshiba India. This is the forum for Toshiba USA. You might want to contact Toshiba in your country.
- Peter

Similar Messages

GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it

I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.

Hi Syed,
I have also started facing the exact same problem since the past few months with my docomo service.
Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
Did you upgrade to iOS 5 and did it help?
PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
Regards,
Hemant

Sound not working after some time

I am using pavilion g6 laptop. Nowadays my laptop sound stops working after some time of use. I checked the drivers but everything seems to be ok. Please help what to do??

Hi sushovanee,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp you have a G6 notebook and after a period of time you lose the sound.
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with this difficulty.
Has there been any recent changes to your system?
To assist you I will need some more information.
What exact model of G6 do you have?
How Do I Find My Model Number or Product Number
What Operating system are you running?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Touch ID registration scans going over 10 times and if it is done dosen't work after some time

Hi,
i have an iPhone 5s (Gold GSM 16 GB) which was bought last december.Touch Id was working great in the first few months but now its not that efficient.It dosent recognize my finger for long hours at sometimes and then magically works in the morning and then back to the same.I have seen many youtube videos where during registration of the fingerprint it takes around maybe exact 10 scans.But my iphone most of the time during registration takes more scans like 20-35
and most of the time eventually ends up with an error, "Try another finger".I have seen two youtube videos where one guy shows to scan it during registration properly by moving it from center-left-right and repeating it while in the other a guy talks of static electricity affecting the touch id.I tried it both and but the problem i faced was during registration where it takes more scans and after the finger lines gets filled it slightly becomes unfilled again.After two times it worked.Then it worked every single time but something made me make another registration of the same finger where the sides were more scanned then the first registration.Eventually i deleted them(biggest mistake!) and it is not registering again and also if it does it happens after 20 faliures saying try another finger.
Any help would be appreciated!

Hello there, omsmac.
The following Knowledge Base article provides a great place to start with some good information that can apply to keyboard issues as well as trackpad:
Trackpad or Magic Trackpad is jumpy or erratic
http://support.apple.com/kb/TS1449
Aside from the usage recommendations, this recommended step is very practical:
If none of the above resolve the issue, try to rule-out software not created by Apple as a cause. To do so, start in Safe Mode.
There are some good steps for testing the keyboard as well found here:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
If the issue persists after attempting Safe Mode, then you may want to try an SMC (System Management Controller) reset. The steps on how to accomplish that are found here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

First USB port stops working after random time and won't work until I restart

Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again
I have tried EVERYTHING, SMC reset - no luck, PRAM reset - same results, Upgraded to lion same results, Upgraded to mountain lion - SAME RESULT
And I can't take it to an apple store because I'm not from the US
I am 100% sure this is a software problem and I've seen here that many people have faced this problem
Please help, it really freaks me out

ElectroSpyzz wrote:
Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again...
I'm sure this isn't what you want to hear but unless you really are using your laptop 24 hours a day, is there any reason why you don't just shut it down and reboot when you're ready to use it again? I have to wonder how many other MacBook Pro owners potentially have the same problem but when they quit computing for the day, their computers quit too.

Hi, my name is Amit, my hot corners stop working after some time. Have to go to mission control to reset them, however they stop again after some time. This is annoying. Can someone please assist to solve this problem? Thanks Amit.

Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.dock.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Mail accounts stop working after few time or sleep

Hi everyone. First at all sorry about my english.
Since few days ago, and probably after run onyx, im experiencing a bug in Mail.
When i start mail, everything its ok. Its works perfect.
But, after maybe 2 hours running (usually i have mail on autostart), i see that all my acounts have the triangle on it.
I click on the triangle and tryed to reconnect all accounts but it does nothing. All of them still not working.
I run the test and all accounts have the red mark of error.
It usually happends when i awake the macbook after sleep.
It has easy solution. Close mail, and open mail again and is ok, everything working normaly, but after some time i have the same problem.
Any suggestions?
Thank you.

If I first delete the accounts, doesn't all the mail I've already got get dumped?
Could I avoid this?
How do I troubleshoot first? It works so well that I've not had to do this.

Multitouch Gestures Stop working after some time in Mountain Lion

I have a problem with Multitouch Gestures on Macbook Pro, using Mountain Lion. After some time 3 thinger swipe to left/right stops working. The only thing that helps to solve this problem is making a restart. Are there any other ways to get rid of this problem?

Me too. My iMac and MBP same here. Having graphics glitches when playing games neither in Mac or Bootcamp with Windows. Sometimes screen even slashed into half and freezed. Wake up from sleep also have graphics issues, like I need to use the crusor to oaint out the grey login screen, if not, it will stay white. Slowly moving the crusor will paint back the grey background.

ICloud does not work after upgrade to iOS8

I updated my iPad air and my iPhone 5s to iOS8 and since then I cannot access any iCloud service from my iPhone, I cannot even sign out of icloud and I always get the Incorrect password message and a ´There was an error connecting to iCloud.' Error (verification failed). I have tried all possible options without any result and I have no backup, no sharing of information/contatcs for the last few weeks....
Can anybody help because this is making my device pretty much unusable....

I have solved the issue by myself, but I don't know exactly what changed. I found instructions on the web about a similar issue after upgrading to iOS7. I could not sign out of Find my iPhone (a mandatory precondition) and after trying several times and signing out of everything possible (iMessage and Facetime as well), after rebooting (twice !) I got a message on the iPad asking if I wanted to link my iPhone to my account, and then suddenly it started working correctly again on the iPhone. I will probably never know the reason, but the problem is now solved.

Web Proxy sessions stop working after some time (ISA 2006)

Hi guys,
we have been using ISA 2006 with Web Publishing Rule to provide access for mobile phone to corporate Exchange via ActiveSync for years. The issue occurred roughly one month ago.
After some period of time (usually it happens once or twice daily) ISA stops to accept connections from the mobile phones. There are no errors on client devices (they don't get new mails). In Sessions tab I see that only SecureNAT sessions from phones remain,
but no Web Proxy sessions any more. There are no errors in Event Viewer and I didn't find anything strange in diagnostic logs.
I've created one more Web Publishing Rule with the same Web listener as for ActiveSync rule for OWA. The intersting thing that ISA still allows access to OWA when issue occurs. Looks like the problem with Web Proxy filter.
After OS restart ISA starts working normally.
I have ISA 2006, sp1, version 5.0.5723.514 installed on VMWare VM with Windows 2003 SE sp2.
Do you have any ideas?

Hi,
Does this issue still exist? If so, you could try to collect logs from devices to find more information.
http://support.microsoft.com/kb/2461792
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Replication DS6.2 - DS5.2 stops working after some time

Hello!
After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
I have 2 masters DS5.2 and two masters DS6.2.
Replication is working fine for some days. E.g. last time the replication was working until 29.11.
But at some point the replication stops working and I get the following errors in the errors log:
[28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
[28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
Since the replication was not working I had to initialize the DS6 masters again:
[29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
[29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
[29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
[29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
[29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
[29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
[29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
as full replica
[29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed92e00001a360000
I tried to change a password. But the replication failed again and since than the replication is working again.
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
But I'm sure that after some days there will be a problem again.
Sometime there are also the errors:
[29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
I tried to reproduce the problem.
At the moment everything works fine and I can do many changes.
But I know that there is somewhere a problem and the replication will stop working again in the next days.
Can you give any advise?
Regards,
Beate
Edited by: 72716 on Nov 30, 2007 10:05 AM

Here is an explanation of the failure:
1. Prioritized replication was introduced with DS6.0;
2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
A work-around:
Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
pwdIsLockoutPrioritized:FALSE
Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
1. The default password policy at any DS6 instance (cn=password policy,cn=config);
2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
3. Any password policy added to a DS6 instance.
Additionally, do not set any prioritized replication rules for other attributes.
It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
Contact Sun support for the status of a fix for the bug. The CR is 6645742.

Why does ServerSocket stop working after some time?

Hi to all.
I have a following problem:
I wrote a multithread application that uses sockets ( TCP ), and use it to transfer some objects between computers in VPN.
It all works just fine, except that sometimes my server socket ( implemented as a separate Thread ) just stops working, and other computers cannot connect to it...?
I didn't specify setSOTimeout(), and did all Exception catch-ing in the thread.
Today, I had some >50000 connections in about 5 hours, and than it just stopped! My server socket stopped accepting any connections...
I restarted my application, and everything worked again properly...
Does anybody know why is this happening?
Please, any suggestion is appreciated....
Thank you.

Hi, thank you all for answering me.
@baftos:
I didn't specify any backlog parameter value. 50 connections at a time seems more than enough for this application... ( Are you sure that 50 is the default value )
I never have more than about 40 connections simultaneously opened, and yes - each one is a separate thread.
@dannyyates:
You're rights, I should have provided some code.
Here it is:
public class Server implements Runnable
ServerSocket serversocket = null;
Socket clientSocket = null;
continueWorking boolean = true;
    public void run()
            startServer();
    public void startServer()
        try
             serversocket = new ServerSocket(3344);
        catch (IOException e)
             System.out.println(e.getMessage());
     while ( continueWorking==true )
         try
              clientSocket = serversocket.accept();
              Worker Worker = new Worker(clientSocket);
              new Thread(Worker).start();
         catch (IOException e)
              System.out.println(e.getMessage());
        System.out.println("The server is shutting down...");
class Worker implements Runnable
    ObjectInputStream obj;
    Socket clientSocket;
    public Worker(Socket clientSocket)
         this.clientSocket = clientSocket;
        try
          obj = new ObjectInputStream(clientSocket.getInputStream());
         catch (IOException e)
              System.out.println(e.getMessage());
    public void run()
        Object object;
     try {
                      try
                           object=(Object)obj.readObject();
                                               // do something with object....
                      catch (ClassNotFoundException e)
                           System.out.println(e.getMessage());
                    catch (Exception e)
            obj.close();
            clientSocket.close();
     catch (IOException e)
    catch (Exception e)
    }What I don't like here is the constructor of the Worker. Could this block the server?
Edited by: Darko on Apr 7, 2009 11:24 PM

Icloud doesn't work after a clean install of windows 8 pro and office 2010

After installing the 'iCloud Control Panel for Windows v2.0' on my cleanly built laptop. I now getting the following error after activation the mail option under the iCloud Control Panel 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again'..
I have done this add also added a second email address and change the new email address to be the default email address.
I've also done the following as well....
Ideally the error message you have mentioned is related to iCloud. But you may try these steps as you have already tried re-installing the iCloud control panel and sign in back to sync with Outlook:
Check if there is any new updated version of iCloud released for Windows 8.
1. Sign out from iCloud control Panel.
2. Go to Outlook -> Click on File -> Options -> Add-ins.
3. Select Com Add-ins in Manage -> Click on GO.
4. Disable all the Add-ins -> Click OK to save the settings.
Now go to iCloud Control panel and sign into the iCloud account. Open Outlook and check if you are able to sync.
however the same original error still accures. can i also point out i have delete the all the os and applications and started again by rebuilding the os windows 8 pro but this time using ms office 2013 and the error 'Setup can't Continue Because Outlook isn't configured to have a default profile. Check your Outlook settings and try again' happens again als did option 1-4 from above as well and the error still happens.
Any Idea's?

Windows 8 is not supported on Boot Camp, that may or may not be part of your issue but it makes troubleshooting difficult. Post in Microsofts forums as well, that error message is not limited to Boot Camp installations, regular Windows users also get it.

Laptop internet connection no longer works after adding Time Capsule to network

The other day I was setting up my Time Capsule for the first time at my new apartment (after having it in a box for months). I've got internet access through my apartment, so I haven't needed to use it as a router like I did the last time I used it. Also, the router is in another tenant's room. So I opened Airport Utility and adjusted the settings to add the Time Capsule to the network. After doing this, my laptop has lost its Internet connection. I can still connect to the network and my iPad has had no issues connecting to the same network and using the Internet, but the Internet won't work on my MacBook Pro (2006 model).
Since then, I've plugged an ethernet cable between my laptop and Time Capsule so I could find it on Airport Utility and change its settings to connect to the laptop via Ethernet. Also, I called my landlord and got the router reset.
I know the Time Capsule/Airport Utility is involved because the Internet connection died as soon as I tried adding my Time Capsule to the network.
Any suggestions?

I am having the same problem. It worked fine (connecting my iOS devices to my macbook pro using internet sharing) until Lion. Then it all went to ****.

On Windows 8, some widgets, such as the menu button near the upper right, stop working after some time, and functionality is restored by rebooting the PC.

I use the latest releases of Firefox as they become available on a Windows 8 PC. Firefox works properly, usually for a few hours, before annoying problems manifest. The problem I'm addressing here is some widgets, including some Firefox widgets and isolated widgets (such as buttons and pull-down selectors) in some websites stop working. In Firefox, the Menu button (the three stacked dashes icon) stops working. And the Download arrow sometimes stops working also. Sometimes, sub-items such as Print stop working. For some pull-downs, the up and down arrow keys might still work even though I might now be able to select with the mouse. Closing and reopening Firefox usually restores some functionality. However, I usually have to reboot the PC to restore all functions which stopped working. Then I am good for usually a few hours again. Another annoyance, which others have addressed, is the eventual appearance of Chinese-looking characters on the tab labels bar across the top. Restarting Firefox gets rid of these for the time being. Thanks for investigating.

hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
the oriental characters are a displaying flaw caused by the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
http://service.mcafee.com/faqdocument.aspx?id=TS100162
https://community.mcafee.com/thread/76071

ICloud rules no working after down time today...

Similar Messages

Maybe you are looking for