ICloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?
iCloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?
iCloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?
Similar Messages
-
Is there any way to know which Apple ID was used to activat
My father activated my iPad mini about two years ago.
I recently restored it after updating it to iOS 8.0.2
After restoring, it is asking for the Apple ID that was used to activate the device.
Unfortunately my father can't remember the Apple ID he used to activate the iPad mini.
I was wondering if there was any way i can know which apple ID was used so i can access my iPad somehow.
Or if there is any other way possible to activate my device. PLEASE let me know.Click here and use Apple's iForgot service, or if needed, contact their Account Security team.
If both methods fail and you or he is the original owner, take the device and its original purchase receipt to a physical Apple Store.
(114190) -
there any way to know where my ipad, because it was stolen? and do not use iCloud? besides not remember if you have installed any applications to track it?
If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards. -
I just lost my macbook air - is there any way to lock it or wipe it (similar to an iphone)?
not unless find my mac was installed before it was lost.
-
my iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??
If you had find my iphone activated on the iphone itself before it was stolen, then you may be able to track it.
Otherwise, there is nothing you can do.
Sorry.
Report it to the police and your wireless carrier and change your password. -
My question...
any answers pl.
I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlierIf I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn -
Is there any way to know that status of DEFINE variable?
Hi,
I have a list of scripts that is executed to create my baseline database. At the beginning of the script execution, we have a SET DEFINE OFF and at the end we put SET DEFINE ON. During one of the scripts, we deliberately SET DEFINE ON and we forgot to SET DEFINE OFF at the end of the script. Consequently, the following scripts started failing without error notification because they contained '&' in the INSERT query. I have the following queries:
1. Is there any way to know the status of the DEFINE variable at the beginning of the script?
2. Since the oracle gives a user interrupted error, the script execution process does not terminate with error. Instead, it continues executing the next scripts. Is there a general way to capture such errors and terminate the script execution. We already have WHENEVER SQLERROR and WHENEVER OSERROR in our script execution process.
Regards
KunalHi, Kunai,
Welcome to the forum!
953495 wrote:
Hi,
I have a list of scripts that is executed to create my baseline database. At the beginning of the script execution, we have a SET DEFINE OFF and at the end we put SET DEFINE ON. During one of the scripts, we deliberately SET DEFINE ON and we forgot to SET DEFINE OFF at the end of the script. Consequently, the following scripts started failing without error notification because they contained '&' in the INSERT query. I have the following queries:
1. Is there any way to know the status of the DEFINE variable at the beginning of the script?Whether it's at the beginning of a script, later in the script, or not in a script at all, the SQL*Plus command
SHOW DEFINEtells you if DEFINE is ON or OFF.
If DEFINE is ON, it will produce something like:
define "&" (hex 26)If DEFINE is OFF, it will produce
define OFF
2. Since the oracle gives a user interrupted error, the script execution process does not terminate with error. Instead, it continues executing the next scripts. Is there a general way to capture such errors and terminate the script execution. We already have WHENEVER SQLERROR and WHENEVER OSERROR in our script execution process.Do you really need to capture those errors? Why not just prevent them? It sounds like you want to make sure DEFINE is OFF at a certain point. To do that, just say
SET DEFINE OFFRegardless of whether DEFINE was ON or OFF before you issue that command, you can be sure it will be OFF after that.
I hope this answers your question.
If not, post a complete test script (or set of scripts) that people can run to re-create the problem and test their ideas.
Point out where the scripts you post are not doing what you want, and describe, with specific examples, what you want it to do in those places. -
hi is there any way of knowing where my find my phone was turned off or its last location thnks
No. Apple can do nothing. For the future there are apps that will periodically email you the device's location (if connected to internet)
-
I just recently purchased an iphone 5s and today my speaker located at the rear end of my device is not sounding clearly, it sound muffed and blurry. Is there any way I could get a new one or get this fix for free?
Hi Jayliin,
Take it to the Apple Store where you purchased it from. It is still under warranty. They will replace it if necessary.
Cheers,
GB -
I have an iPad 3 or the new iPad with the normal charger.. my iPad is not starting is there any way to format it? if not will the apple guys be able to access my data?
Honestly, I don't think that they have any other way of accessing anything on the iPad than any other user has. The Apple Store genius will just put the device through the standard troubleshooting steps - in your case probably try to restore the device to factory settings and if that doesn't work, then they will make some sort of offer for a replacement assuming that your iPad is still under warranty.
If I'm not mistaken they will probably erase the device in order to try to "fix" it. That's what restoring to factory settings does. I assumed that you were concerned about losing data - but if you are concerned that they are going to see something that you don't want them to see or access, I'm pretty sure that's not going to happen. -
I accidently deleted a voice mail message. Is there any way to retrieve it? I was told I had to reset my password since I entered the wrong one three times.
Depends on your carrier. You'll have to contact your carrier for how to do this. (This is for AT&T: http://www.att.com/esupport/article.jsp?sid=52649#fbid=WLddP4KyTAu.)
-
Someone had my apple id password and bought a game from the App Store. I've changed my password but is there any way to find he number it was downloaded to?
Contact iTunes support
-
is there any way to know when (and/or whether) a particular tv season will be available for purchase on itunes. i'm particularly interested in:
the 2nd season of "homeland,"
the 5th season of "damages"
the 7th season of "dexter."
thanks.Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.
-
Is there any way to know that the UI has been updated due to a bind change?
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
c.fill=Color.RED;
printNodeAsImage(filename) //to a file
}Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
c.fill=Color.RED;
printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray -
Is there any way to know that SOAP Client has closed and broken connection
Hi,
I am exposing a stateless session EJB using Oracle SOAP Webservices...and it is working smoothly.
But when the SOAP client crashes or is closed, is
there anyway that can know this happened on the server side i.e., the SOAP connection is lost.
Thanks,
PrashantOops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
c.fill=Color.RED;
printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray
Maybe you are looking for
-
MacBook Pro Cannot Connect to Wireless Router
I have a brand new MBP and it won't connect to any non-apple wireless routers - my computer is 2 days old (it's awesome and I love it accept that I can't get wireless connection at home) - wireless router: westell versalink model 327 W - PROBLEM: my
-
Hi All, Our company uses SCCM 2007 and we don't really have an SCCM officer here. I kind of try to get things done by googling a lot but for this i can't find a a solution so i open a thread. I'm a newbie to SCCM 2007 so I don't know if i'm about to
-
How to change the view of the basic search portlet
Hi, I want to change the view of the basic search portlet. To be more precise, I just want a text box and a Go button in it. Cananybody advise on how to do this? Regards, Priya
-
What is SAVE WITH ID in ABAP Query?
There is an option on the selection screen when we want to save an abap Query. This option is "SAVE WITH ID " and a text field is given where we can give some id name. How do we view this saved list. where should we search to see this list.
-
When exactly source system recognizes the last delta is succesfull/failed.
When exactly does the source system recognizes the last delta is successful/failed? Case -1: In logistic applications.. What if I changed quality status to red for a successfully completed delta, and then requested new delta? Case -2 : I