ICloud set up process fails to recognize my Apple ID even after emails confirming it's verification!?!

In setting up my iCloud account in the preferences panel, the system doesn't recognize my ID and ask me to verify thru an email.  This email has been sent and the verifcation process completed, but subsequent attempts to set up iCloud on MacBook Pro aren't successful.
Any suggestions on how to work around this / or proceed some how?
M

iCloud must be initially set up from an iPhone, iPad, iPod touch or Mac. An iCloud account cannot be created from a PC.

Similar Messages

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

  • We have 2 mac books but i tv only recognizes one of them even after doing a reset

    we have 2 mac books but i tv only recognizes one of them even after doing a reset

    Welcome to the Apple Community.
    Are you using the same homesharing ID for both computers, are they on the same network.

  • TS1559 My Iphone 4S with the latest software, wifi setting is grayed out. Could not be resolved even after restore software in Itune.

    My Iphone4S wifi setting was grayed off and could not set wifi on even after I have reset network setting and also restore software from Itune.

    Hi YKLeong,
    Thanks for visiting Apple Support Communities.
    It sounds like you may have tried all the steps in the article below. If your wi-fi setting is still grayed out after trying the steps, the article suggests contacting Apple support for help with your iPhone hardware:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Follow these steps to resolve the issue:
    Verify that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    If your issue is still unresolved, perform a software restore in iTunes.
    Additional Information
    If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
    If you need to contact Apple, clicking the link above should take you to the right options for your region.
    Best Regards,
    Jeremy

  • HT1414 I am unable to connect to iCloud as it keeps saying unable to verify Apple ID even though I've changed password several times to overcome this, only had the phone yesterday

    Please can anyone explain why I'm unable to connect to iCloud, it doesn't seem to accept my Apple ID and password, keeps saying unable to verify, I've changed the password several times to no avail, the phone is brand new and only purchased yesterday.
    Help

    Follow the directions here to verify your ID:
    http://support.apple.com/kb/he68

  • Acrobat 9 fails to recognize (scanner) Epson Artisan 730 after Mac Pro and Mountain Lion Upgrade

    I had no problems scanning from the Epson Artisan 730 all in one until I upgraded my Powermac G5 to a mid-2010 Mac Pro with Mountain Lion 10.8.  The printer is installed with most recent drivers from Epson (the install disk will not work on 10.8 anyway).  I can scan directly from the Print and Scan system preference under the scan tab of the printer and it prints fine from Acrobat.  When I go to Document -> Scan to PDF, it brings up a dialog box in which the first input is box is Scanner:  "Please select a device" with up and down arrows on the right.  When I click on the up and down arrows, there are no selection options other that "Please select a device" with a check mark next to it.  This printer is wireless, as is another Canon which also has a scanner and neither appear as available.  Very frustrating.  I have repeated the instalation process (for the Epson downloaded driver utilities) and it just is not seen.
    If anyone has any workarounds or solutions, I would be grateful.

    1strail wrote:
    Of course now I have a red badge on the App Store that is asking me to update the Epson driver.  I wonder if that will blow out the TWAIN driver.  It's epson14333.dmg. 
    No.  Your TWAIN drivers are separate than the Image Capture Device drivers that would be installed by the printer driver update.
    Also, no way of getting rid of the badge notification in system preferences.  App store is not listed.
    There is no law that you must update software just because it is available.  There is no way to get rid of the red badge, but you don't have to do the upgrade.

  • IMac suddenly fails to recognize my Apple bluetooth keyboard

    My old wired keyboard works fine. No damage is visible.  New batteries don't help.  It connects to my iPad just fine, but not the iMac running OSX10.8.5 Mountain Lion. in System Preferences>keyboard> Bluetooth keyboard search does not find a keyboard. Wireless mouse works fine.

    First make sure the batteries aren't dead and that the keyboard hasn't already been paired with another device. If it hasn't, the keyboard should pair automatically when you reboot. You may have to press and hold the power button on the right side of an Apple keyboard until the LED starts flashing.
    Otherwise see these support articles:
    Mac mini (Mid 2011 and later) and iMac (Late 2012): Bluetooth keyboard may not pair during Setup Assistant
    Apple Wireless Keyboard: Difficulty during pairing process
    Unreliable wireless performance may occur when USB 3.0 external devices are close

  • The Firefox.exe process hogs 25% of my CPU resources even after I've closed it.

    On a relatively consistent basis, when I close the Firefox windows I have open, the firefox.exe process doesn't end. When I go to open Firefox again later, I get the error message that I can't open Firefox because it's already running or not responding. When I look in Task Manager (on Windows 7 Home Premium 64-bit, BTW), the firefox.exe process is holding steady at 25% CPU usage along with whatever memory usage it already had consumed, even though the Tasks tab doesn't list Firefox as being open.
    == This happened ==
    A few times a week
    == I'm not exactly sure. It sort of just started on its own.

    Ed, this kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
    #run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
    #update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
    #disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
    #enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
    #you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
    Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
    #try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
    #do a virus/malware check on your computer. If this doesn't fix it, proceed;
    #disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
    #check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
    #check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
    #update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
    #clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can help you further.

  • Lion does not recognize any login passwords even after PW reset

    Hi guys!
    While working on my macbookpro with lion, I got a request to write my admin password for uninstall of an app. The thing is that my usual password didn't work. So I rebooted my mac and surprise, surprise: none of the user accounts (3), including root were accepting their own passwords!
    So I made CMD+R, Terminal, resetpassword, and changed them all, including ALCs reset: No effect on any user login! still gives me the shake's and after 3 trials the password hint...
    I'm hopping not to have to make a complete system restore from timemachine, or a clean install..
    I find this problem really creppy,
    Any toughts are much appreciated.
    Thanks!

    Try the steps in another forum this step I found on the by poster named g/re/p:
    "Boot into Single-User Mode."
    1. Shut down the computer if it is on.
    2. Press the power button to start the computer.
    3. Immediately press and hold the Command (Apple)
    and the S keys until you see white text appear.
    At the prompt, type fsck -yf and press the return key.
    Type mount -uw / and press the return key.
    Type rm /var/db/.AppleSetupDone and press return.
    Type reboot
    When the computer restarts, it should act as if you had
    just installed OS X for the first time - it will prompt you
    for information to set up an administrator level account.

  • Mac Air new-bought one week ago- doesn't recognize my IPhone 4 even after the upgrade to IOS 7!!

    Hi everyone, I bought a Mac Air 11" one week ago, so it's super new. When I connect my IPhone 4, now updated to IOS 7, it doesn't recognize it, it doen't charge it and the vibration goes like crazy! Sometimes it appears that there's the lock that forbids it, but I've always used it and I never had problems.. also cause the Ipad is locked as well and there are no problems!
    Has anyone had the same problem??
    thanks!

    chiarafromtv wrote:
    You mean like the information on Itunes? That's 11.1 (126) 164 bit..
    Yes. Thank you.
    chiarafromtv wrote:
    . the Mac has USB3, the IPhone, that's a 4, has the USB2.. could it be the problem?
    No. USB 3 is Backwards compatible with USB 2 and even USB 1...
    chiarafromtv wrote:
    When I connect my IPhone 4, now updated to IOS 7, it doesn't recognize it, it doen't charge it and the vibration goes like crazy!
    More than likely an issue with your phone.
    Perhaps a Visit to an Apple Store or  AASP (Authorized Apple Service Provider) is required.
    The fact that the vibration goes like crazy  is suggestive of an issue.

  • My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

    My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • In Apps store on mac pro my apple id is showing as someone else and I cannot remove the name to re input my actual apple id even after signing out - it is set as default or something and yet I am the only user of the mac?

    <Email Edited by Host>

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
    1. Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    2. In the Finder, press command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
    Other...
    A sheet will drop down. In that sheet, select
    Raw Query
    as the criterion, then click OK or press return.
    Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
    4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
    Quit and relaunch the App Store. Test.
    If you find these instructions confusing, ask for an alternative method.

  • In setting up ICloud on my new Iphone 4s, I lost most of my calendar events in my Outlook 7 calendar.  I used to have MobileMe but in the set-up process was told to turn that off which I did but now most of my calendar events have disappeared

    In setting up ICloud on my new Iphone 4s, I lost most of my calendar events in my Outlook 7 calendar in my Vista PC.  I used to have MobileMe but in the set-up process was told to turn that off, which I did but now most of my calendar events have disappeared after syncing with ICloud.  How can I get my missing calendar events back?  They are still on my 3Gs Iphone which I have not yet updated to IOS5.
    Thanks for any help.
    marybpod

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • HT6437 iTunes fails to recognize iPhone

    I am attempting to backup/restore my iPhone 4S running iOS 7.1.2, to my new iPhone 6 Plus running iOS8.1.2.
    Unfortunately, iTunes 12 fails to recognize my iPhone device. Therefore, it's impossible to Backup or Synch.
    Any ideas to correct this? Do I have to update my ancient iPhone 4S to iOS 8.1.2 first? I tried different USB cables, no luck. I tried stop/re-start iTunes.

    Hello there, dpharbison.
    When transferring content from an older iOS device to a new one using iTunes, the following Knowledge Base article offers the steps on how to accomplish that:
    Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
    Use iTunes
    If you don't have an iCloud account or you just want to keep a backup on your computer, you can use iTunes to back up and transfer content on your device.
    Get ready
    Install the latest version of iTunes on your computer and the latest version of iOS on your original device.
    You can't install a backup of a newer version of iOS onto devices that are using earlier versions of iOS. If your backup came from a device that has a newer version of iOS installed, update your new device before you transfer your data. For help, see Unable to restore from a backup of a newer iOS device.
    Back up and transfer
    First, back up your old device using iTunes. You can also encrypt the backup so that it remembers the passwords for your email, Wi-Fi, and more when you transfer to the new device. Otherwise, you can re-enter these passwords on the new device.
    Then transfer your data from your device to your computer.
    Remove your SIM card
    If your device has a SIM card, use the SIM-extractor tool or a paper clip to remove the SIM from your old device and insert it into your new device. Or if your carrier gave you a new SIM card, use that instead.
    Set up the new device
    When the backup of your old device is finished, turn on your new device. Follow the setup assistant, which will ask you to choose these things:
    Your language and country
    Whether to enable Location Services
    A Wi-Fi network
    If you don’t have a Wi-Fi or cellular data connection, you can also activate by tapping Connect to iTunes.
    Restore the backup
    When prompted to set up your device, select Restore from iTunes Backup.
    Connect to iTunes
    Connect your new device to iTunes, using the same computer you used to back up your current device. iTunes will ask you to restore from backup or set up as new. Select the backup of your old device and choose Continue.
    If the progress bar in iTunes pauses for a while, wait until the restore finishes.
    Sync other content
    When the restore finishes, your device restarts, and then it's ready for you to use.
    Keep your device connected to iTunes to sync content that isn't in the backup (such as music, videos, and apps). To change the type of content that syncs, click the syncing tabs in iTunes.
    Enter your passwords
    If you restored from an unencrypted backup, you'll need to enter the password for your Apple ID, email and other accounts, and voicemail. If you've forgotten your voicemail password, contact your carrier.
    If your device continues to not be recognized, these article provide further troubleshooting depending on the operating system your computer is running:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    or
    iOS: Device not recognized in iTunes for OS X - Apple Support
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

    I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
    I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue. 
    I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
    I have tried the other solutions on here with no luck. HELP please.
    Many Thanks.

    Progress Update.
    I made a back of what existing phtos and Videos I had on my Iplhone.  I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
    Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted) 
    Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
    Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
    As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio.  The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
    I then went to bed as the restore is a long process.  When I woke up the library had library had cleaned itself up.  Mysteriously the prcess had deleted the files missing the their thumbnails.
    This is very perculiar and bad behavior.
    I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
    Here are the lessons learned.
    DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
    DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
    DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store.  (I did both :-(

Maybe you are looking for

  • Templates and SSI

    http://kirtmarkle.com/slide1.html http://kirtmarkle.com/ http://kirtmarkle.com/gallery_frameset.html Above I have included a link to a set of 3 slides I create this morning in an attempt to better define my site (as well as links to my Home and Galle

  • Export a pdf to a swf file with navigation buttons???

    I have CS4 and I've tried to export a couple indesign files using the swf export feature, but it the navigation of the file is very weak and not very intuitive, and when you zoom in to any of the text the text goes fuzzy. I would like to just convert

  • Install iTunes and Quicktime seperately?

    I already have quicktime installed, and all I'm trying to do is upgrade my current iTunes to 10.1. Every time I try to do this, it gets to the part where it installs quicktime, gets to "computing space requirements" and stops. An error message pops u

  • How can I copy bookmarks from winxp laptop to win7 laptop w/firfox already on it?

    no details. just need to move/copy extensive bookmarks from old laptop to new laptop.

  • Zen Micro problem

    as usual it seems.. Well, since my pc and zen won't find eachother I'm soon giving up. I've read every topic concerning this and I'm soon giving up. This sucks :/ My problem is this, after I had installed all the software and drivers I was looking fo