ICloud showing wrong ID

I am unable to access iCloud in Lion directly from my computer because the iCloud icon in System Preferences invites me to give a password for an Apple ID which is NOT my ID. The iCloud login from the iCloud icon should get this ID from my account in User&Groups.  This previously had an old e-mail address down as the Apple ID (which was never used for anything) but the ID ihas now been corrected in Users&Groups but does not transfer to the iCloud login. Any suggestions?
I have no trouble with my ID and password for everything else

Then maybe I'm misunderstanding you, but signing out shouldn't be difficult.

Similar Messages

  • Unread VIP messages counter on iCloud shows wrong numbers

    Hi,
    I have VIP inboxes set up. They appear on my Mac, iPhone and iCloud.com. The unread VIP messages counter on my Mac and iPhone are showing the correct numbers of unread VIP messages. However, the counter on iCloud shows wrong numbers.
    Does anymore have the same experience?
    I deleted the VIP inbox on iCloud.com and re-created it. Then the issue was solved. Some days later, however, it started counting wrongly again.
    Example:
    Peter is a VIP for me.
    1. I receive 2 messages from Peter, so the unread VIP messages counter on my Mac, iPhone and iCloud.com raises to 2.
    2. I read both messages
    3. The unread VIP messages counter on my iPhone and Mac vanished, and so does the general unread mail counter.
    4. On iCloud.com, my general unread mail counter would also be 0 but the VIP unread mail counter would still be 2. The VIP inbox does not show any unread email, tough.
    Best regards,
    Marc

    I've reported this error twice via Apple's iCloud feedback page on the website - http://www.apple.com/feedback/icloud.html
    No solution as yet... but an earlier VIP bug (where, if the same contact sometimes sends as "@mac.com" and sometimes "@me.com", they had to have separate VIP mailboxes) was fixed. (At least, I think it was fixed: if you put all the relevant addresses against the same single contact in iCloud and delete any other instances of the contact with the same address, then iCloud creates one amalgamated VIP inbox for them. But I digress.)
    The mis-count bug has been around since the day VIP appeared - hopefully getting a bit embarrassing for someone on the iCloud team? Maybe someone at Apple reading this?

  • Icloud shows wrong apple id , how do i change it

    icloud shows wron apple id , how do i change it to the correct apple id

    To change the iCloud ID on your phone go to Settings>iCloud, tap Delete Account, then sign back in with the ID you want to use.  (This only deletes the account from your phone, not from iCloud.)  If you are signing back into the same account with just a renamed ID, choose Delete from My iPhone when prompted.  Your iCloud data will be synced back to your phone when you sign back in.
    If, however, you are changing to a new iCloud account with a new ID, choose Keep on My iPhone when prompted, then choose Merge after signing into the new account and turning on your iCloud syncing to upload your data to the new account.
    Before deleting the account, save your photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

  • Outlook add in keeps showing wrong password

    Outlook 2013 will not synch my calendar or contacts after the initial set up.  I have removed and reinstalled the iCloud control panel several times.  When I reinstall it, it synchs my contacts and calendar in the initial set up.  But after that the add in shows "wrong password" and will not synch any changes.  I have removed the iCloud control panel and removed all of the files.  The initial set up runs fine.  Then "wrong password"!

    Hi,
    Does the issue happen to all incoming messages or some specific messages? Please confirm if the issue can be reproduced.
    Make sure time zone settings, Date and Time settings are configured correctly in Outlook 2013, local computer machine and Exchange server using. We can open the problematic message, click File > Properties to check time in the message header. Please close
    Outlook and receive a test messages in OWA to check whether the time is shown wrong or not.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Changed apple password but in iphone still it shows wrong

    i wants to erase data on my Iphone, but as i press the Erase all content in iphone for resetting, shows wrong password popup.
    i already changed my password several times but i don know why in Iphone the new password is not valid.
    i need your support .

    Just to confirm is it asking for passcode or Apple ID password?
    If it is asking for the Apple ID password then you have Find My iPhone enabled in Settings>iCloud. Make sure the Apple ID is correct in Settings>iCloud and that you are providing the correct password for that Apple ID.

  • LR 5.3 showing wrong thumbnails

    I have been running LR 5.3 smoothly for a while but a couple of minutes ago LR started to show wrong thumbnails, it shows thumbnails from a delete Snapshot. I have tried purging my cache but nothing happens. I have upgraded from LR 3 to LR 3.5  Ideas ? This is my system:
    Lightroom version: 5.3 [938183]
    Operating system: Windows 7 Home Premium Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 2
    Processor speed: 1.9 GHz
    Built-in memory: 3003.1 MB
    Real memory available to Lightroom: 3003.1 MB
    Real memory used by Lightroom: 912.9 MB (30.4%)
    Virtual memory used by Lightroom: 901.7 MB
    Memory cache size: 364.0 MB
    Maximum thread count used by Camera Raw: 2
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1366x768
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.3
    Library Path: C:\Users\User\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
    Settings Folder: C:\Users\User\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) 500px
    2) Behance
    3) Canon Tether Plugin
    4) Facebook
    5) Flickr
    6) Leica Tether Plugin
    7) Nikon Tether Plugin
    8) SmugMug
    Config.lua flags: None
    Adapter #1: Vendor : 8086
        Device : 2a42
        Subsystem : 360b103c
        Revision : 7
        Video Memory : 64
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (Conexant High Definition SmartAudio 221)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: LR5x89
    CardID: 10818
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: Mobile Intel(R) 4 Series Express Chipset Family
    ShaderModel: 10.0
    Vendor: Intel
    VendorID: 32902
    Version: 8086:2a42:360b103c:0007

    I have had this problem also ever since I updated to 5.3,  I think it is a major bug!
    At random the preview window on the left doesnt show the preview of the presets anymore when I hover them, and when I click back and forth to other images it suddenly starts working again, its a very annoying problem and I cannot believe that Adobe isnt aware of it yet!
    Marcel

  • "Invoice History Report "show wrong balance for supplier invoice with USD

    Invoice History Report show wrong balance for supplier invoice with USD Currency
    After I run this report i see in the last of this report there is difference between the supplier total
    USD (Currency ) and the open Balance USD , it is decreased the open balance
    for supplier with 2300 USD with out any reasons
    bellow is some data copy of the report
    ======================================================
    Supplier Site Total: SAR 34,700.00
    Supplier Site Total: USD 39,000.00
    Supplier Total: SAR 34,700.00
    Supplier Total: USD 39,000.00
    Open Balance: SAR 34,700.00
    Open Balance: USD 36,700.00
    *** End of Report ***
    ==============================================
    please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
    or it is bug in this report , becuase i compare this report with other report in account payable like
    -supplier open balance letter
    -invoice register report
    -invoice aging report
    all this report give me the amount for supplier USD =39000
    BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
    thanks

    Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
    Thanks

  • Iphone 4 showing wrong IP address for home wireless

    2 days ago we reset our home wireless password and updated our devices (ipad, laptop, and two cell phones). Now my iphone 4 will no longer connet to the wireless. It accepts the new password to join the network but it never connects. It is showing wrong IP address. How can I change it to the correct IP ? Tried hard rest, forget network, and renew lease all trying to get it to automatically update the info. Out of ideas. Any suggestions?

    I have the exact same router as you, I have Comcast, and I am having the exact same INFURIATING problem.
    Comcast and Apple have no ideas. Linksys tells me I am having a router problem.
    I even went so far as to buy a new router and modem from Linksys (as they claim they no longer make the router/modem combo because it doesn't work well). I still don't buy this... my PC, my PS3, my DS... all of them connect to the router perfectly.
    I have the new modem and router here and planned to give that a whirl tonight but Comcast was being difficult and saying it could take 72 hours to activate my new modem. Totally unsat. I had them reconnect the WCG200 and I am still trouble shooting to no avail...
    If anyone finds a fix (short of a new router and new modem)... please post!

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • HT5622 I wrongly entered my apple id into my new i phone . It was my e mail address with a letter wrong I have registered right on the i cloud account but when I go to get apps it still shows wrong e mail How do I delete this incorrect e mail Thanks Mike

    I wrongly entered my apple id into my new i phone . It was my e mail address with a letter wrong
    I have registered correctly on the i cloud account but when I go to get apps it still shows wrong e mail
    How do I delete this incorrect e mail? Thanks Mike

    settings - app/itunes store - sign out - sign back in.

  • FBL5N t code and BSEG table is showing wrong contract number

    Hi,
    The proces flow is contract number>sales order>DMR-->Invoice
    Now when I am checking the VBFA table it's showing correct contract number against invoices but FBL5N t code and BSEG table are showing wrong contract numbers.
    Why FBL5N and BSEG table is showing wrong contract number?
    Currently we are using one enhancement and user exit is used to incorporate one customized field as identifier for bill type.
    1. During the billing document release to accounting VFX3, The user exit triggering and it is update the customized fields and Net settlement indicator.
    2. Using the Invoice number, get the fields VGBEL(Document number of the reference document) and VGPOS (Item number of the reference item) from VBRP and read table VBAP with VBELN and POSNR, to get DMR number (Sales Document) that created for the Invoice.
    3. Use fields VGBEL and VGPOS on table VBAP to get the sale order number.
    4. By using the Sales order number, get the Distribution channel to update Net indicator field
    In accounting table BSEG-UZAWE = JF must be updated on the customer line.
    5. Retrieve the sale order number and item level to get customized field from table VBAP
    Any pointers.
    Thanks
    Ashu

    Hi Reazuddin,
    Thanks for your reply,
    I am concercerned about BSEG table and using user exit EXIT_SAPLV60B_008 to post the document in FI.
    Now in we have enhanced this user exit  for contracts and included in this way.
      SELECT SINGLE ZZ_CONTRACT FROM VBAK INTO (LC_CONTRACT) WHERE VBELN EQ cvbrp-vgbel.
    Endloop.
    *Moving the values to final accounting table
    loop at xaccit.
    xaccit-vertn = lc_contract.
    xaccit-VBEL2 = xaccit-AUBEL.
    xaccit-xref3 = lc_vbel2.
    MODIFY xaccit .
    ENDLOOP.
    Clear: lc_contract,lc_vgbel,lc_vgpos,lc_vbel2.
    But I am getting correct data when checked other clients( development and quality), this problem I am getting in production.
    Do I need to ask the ABAP'er to debug this enhancement in production?
    Thanks
    Ashutosh

  • HT5622 Some pictures in my iCloud show up blank on my ipad.... But it says I have zero pics on my iPhone... Where are my pictures?

    Some pictures in my iCloud show up blank on my ipad.... But it says I have zero pics on my iPhone... Where are my pictures?

    Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
    The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.
    The problem I see is that the photos aren't on your phone and you won't be able to get them from the cloud because they are over 30 days old.
    As for your iPad it sounds like they might be there, but you have encountered some sort of corruption. The problem is you can't turn photo stream off and on again to reset it, because you would lose what ever you have (even though they are corrupt) and they can't be recovered from the cloud.
    The only suggestion I have is to try restarting the iPad.

  • ICloud shows 'no devices' even though my iPhone has the FindMyPhone app installed and is logged into the iCloud account.  How can I get the phone to show up?

    My phone signs in OK with iCloud, and iCloud syncs the calendar etc. OK, but FindMyPhone app does not work.  It is iinstalled and logs in to iCloud OK, but iCloud shows 'no devices'.  I've uninstalled/reinstalled several times with no change.  The phone is connected to the internet, FindMyPhone is turned on, and location services is turned on.  What else can I do to get iCloud to find this phone???

    Your phone should automatically re-appear in "Find my iPhone" when it next connects to the internet. There's nothing you can do to force it.
    So, from that support document you've confirmed that none of the following are true:
    The date on your device is incorrect. This can be set in Settings > General > Date & Time.
    Your iOS device is currently off or not connected to a data network (Edge, 3G or Wi-Fi).  Wait a few minutes and try again.
    Your iPad (Wi-Fi only), iPod Touch, or Mac is currently off or not connected to a Wi-Fi network.
    Location Services is not enabled on your device in Settings.
    You are located in a country where Apple does not offer this feature. This feature may not be available in all countries due to technical limitations or local law.
    Have you tried the age old troubleshooting tip of turning the phone off and then on again?

  • Customer Credit Limit showing wrong in VKM3

    Hi All,
    Customer credit limit is showing wrong in VKM3 for all the customer.
    i.e : actuall T.Code:F34 is showing 740,000.00 which is correct. But in VKM3 it is 740.00(insted of 740K it is showing 740 only)
    The same thing happening for all the customer. How can I correct this. Pls advise.
    Thank You ,
    Pranitha.

    Thank You for you replay.
    But I found some other client, the credit limit same in FD32 and VKM3.they also ECC6.0.
    So what is the solution.

  • Gl balance showing wrongly in Fs10n

    Dear all,
    We are using 6.0 version. I got one issue from my client in which one of GL balance open amount showing wrongly
    The  gl account open balance showing 8500/- but when we double click on that it showing 7200/-.we did not carry forword the balace to 2008.
    I have carry forwarded the gl balance again to 2007.But its showing wrongly.can any one help me to solve this one
    Thanks in advance
    srinivas
    Edited by: sandhati srinivasa rao on Jun 19, 2008 8:24 AM

    Hi,
    You should c/f the balances to year 2008 (the current year being used) using FAGLGVTR - Balance Carryforward (New) . Unless you C/f balances the said problem will remain.This should solve your problem.
    Take care..
    Rgds,
    KJU

Maybe you are looking for