Icloud shows full but only 1.6 gigs used

My icloud shows its full but I'm only backing camera roll which is 1.6 gigs every other app is off.
What is the problem?
Please help
Thanks,
Gian

The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Backups also automatically include things like text messages and ringtones which can take up lots of space.

Similar Messages

Hard driving showing full, but only half the space is used

iMac mid 2011 with 1 TB internal drive
It is being reported I only have 70gb of space left. From looking at my files, I know I have used about 465gb, I scanned my computer using Omni Disksweep and I could not find anything that appears to be bloating the number to almost double my use. My timemachine backups were to an external drive, so I don;t think that could be the issue. How can I determine what is using the other 400+ GB of space?

ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

320GB hard disc is full, but only 112GB of data used

As you can see OmniDiskSweeper could only find 112GB of Data. The same goes for the Programme WhatSize.
I don't know what these 143GB of music should be either. I've got 11GB of music in my iTunes library, and maybe 10GB of video files on my mac. The rest i pictures etc. Wherever I looked online it said that these programmes would tell me where my storage capacity is being eaten, but they all fail to do so. TimeCapsule function is switched off.
Hope Someone can help.
Cheers

Hello,
First Open Console in Utilities & see if there are any repeating messages, making huge log files.
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option key down when clicking on Find to Find All.
Search for say File Size Geater than 1 GB

Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

leonsee94 wrote:
Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ?
You cannot see photos backed up in iCloud on your computer.
Camera Roll photos backed up to iCloud are still in your Camera Roll on your iPhone.
You need to regularly sync the photos to your computer. (then you can see them on your computer).
-> http://support.apple.com/kb/HT1296
then delete them from your Camera Roll.
You can sync the photos you want on your iPhone back to your iPhone using iTunes.
-> http://support.apple.com/kb/HT4236

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 6 apps this is really bothering me please help I can't even take pictures because it says I've no storage

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 5 apps this is really bothering me please help I can't even take pictures because it says I've no storage I also have no messages at all

My iPhone is a 16GB and it says 9.0GB Available and 3.7GB used; I suspect the missing 2.3GB is occupied by the system software.

Where did my memory go? HD showing full but why??

I have an 80GB HD - it's only rated to 75GB which is fine.
The problem is it's showing completely full, but when I look in Finder under Macintosh HD, the 4 folders (Applications, Library, System and Users) only take up 65GB of space.
What happened to the other 10GB - where did it go? I've looked for it everywhere...

80 GB turns out is about 75.2 GB formatted. The reason is ISO. Unfortunately the entire hard drive industry has played this game since the beginning, and ISO has let them get away with it. It is discussed in:
http://docs.info.apple.com/article.html?artnum=30065
The other two thirds of lost space, may be taken up by invisible files.
See my FAQ*:
http://www.macmaps.com/diskfull.html
- * Links to my pages may give me compensation.
Message was edited by: a brody

My iCloud is full, but I can't see what is in it!

I think my iCloud is full of pictures, but I can't tell for sure what is in it. I tried downloading them to my pc with photostream, but the folder is still empty. What do I do now? This is so confusing! Can anyone help?

Hi, thanks for your input.
Unfortunately I still have 10.81 GB Other-stuff on my iPhone. Even after restoring the whole thing....
I looked in Settings > General > Usage, and it seems that it was only Programmes that was resuced after cleening that up.... HOPE you have more surgestions!?

SQL Server 2014 Standard, but only 2 GB RAM used

Hello,
I just installed MS SQL Server 2014 Standard Single x64 on a Windows 8 PC. It was bought to replace the Server Express because the RAM limitation of Express.
I set min server memory to 500 MB and max server memory to 28672 MB. PC has 32 GB Ram.
Now I start a very crazy procedure/query that is running for hours.
The problem is now that task manager shows:
- SQL Server Management Studio (32 Bit): 0% CPU and 135,4 MB RAM
- SQL Server Windows NT - 64 Bit: 60% CPU and 2.032,6 MB RAM
If I use: SELECT * FROM sys.dm_os_process_memory I get:
physical_memory_in_use_kb : 2124632
memory_utilization_percentage : 100
So why is there Management Studio 32 Bit if I installed it through MS SQL Server 2014 Standard Single x64 installation?
And much more important: Why is only 2 GB RAM used if 32 GB are there and 28 GB should be used?
kind regards
Peter

Hello,
Could you try to enable Lock Pages in Memory option for the SQL Server service account?
http://www.sqlcoffee.com/Tuning05.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

16 Gig of RAM but only 3.2 gig showing as available in CS5

Hi,
This is my first post so I hope it is in the right place.
I have just received my new machine. It should be quite a monster. It is a top of the line i7 2600nCPU @ 3.4 GHz running Windows 7 64 bit with 16 gig of RAM and 3 drives. Drive 1 for windows and programmes; Drive 2 for data and Drive 3 (a crucial SSD) for the photoshop scratch disk. So it can access Open GL it has a Nvidia GeForce 570/PCI/SSE2 graphics card. It is a fresh install. There are no other programmes running.
After the instal the first thing I did was go to edit -> preferences->performance only to find that I only had only 3,255 MB of ram available. I would have thought that is way way low. I was expecting somthing more like 15,000 MB. Does this sound right and if not what is going on here?
Also, I plan to be working with HDR photography with up to 9 full res shots (captured Raw) with lots of adjustment layers. I have set cache levels to 4 and tile size to 128K. Does this sound about right?
Thanks for your help.

Hi Noel,
Thanks for that. Reinstalled and chose the right options this time. Now I have 14.6 gig of available RAM - much more like it. I have set ram to 90% (13200).. or do you suggest I stay within thier reccomended range of 8066-10560. Bear in mind that I have s fully dedicated high spec 128 gig SSD drrive sitting there as the nominated scratch disk.
Again thanks for your help.

C3 phone memory showing full but phone empty PLEAS...

i have a c3 an the phone memory is says i only have 3mb left yet nothin is on my phone ive tried to hard reset the phone to factory settings but this just lessens my small amount of memory i have got left... when i explore my phone i have nothing in it evan deleted clip arts etc to free spae up... please someone help

I have been having this problem since the latest update a few days ago. I was out using my phone for about 3 hours and it showed that it was still full and all of a sudden it shut down. I restored my phone and it's doing it again as I'm typing. I have to shut down the phone and turn it on again a few times for the battery indicator to show the correct charge.
Another issue that I've been seeing since the 3.0 update is my service indicator constantly showing "searching" even though i can make calls. For this to be corrected I have to either 1. shut down my phone and turn it back on or 2. place it on "airplane" mode then turn "airplane" mode off.

C3 phone memory showing full but phone empty HELP

i have a c3 an the phone memory is says i only have 3mb left yet nothin is on my phone ive tried to hard reset the phone to factory settings but this just lessens my small amount of memory i have got left... when i explore my phone i have nothing in it evan deleted clip arts etc to free spae up... please someone help me

I have been having this problem since the latest update a few days ago. I was out using my phone for about 3 hours and it showed that it was still full and all of a sudden it shut down. I restored my phone and it's doing it again as I'm typing. I have to shut down the phone and turn it on again a few times for the battery indicator to show the correct charge.
Another issue that I've been seeing since the 3.0 update is my service indicator constantly showing "searching" even though i can make calls. For this to be corrected I have to either 1. shut down my phone and turn it back on or 2. place it on "airplane" mode then turn "airplane" mode off.

Disk storage showing full but sum of individual files shows much less used

My MacBook Pro recently gave 'start up disk full' messages. When I check with OminDiskSweeper it shows my HD as 148.3GB used 0.4GB free yet the drive sweep only shows 95.5GB used. When I do the same for my mobile me storage it shows 9.9GB used 0.1GB free yet the drive sweep shows only 38MB used. I am not sure what the 'missing' space is being occupied by and the performance of the macbook has now ground to a halt. Has anyone experienced similar issues and been able to resolve them?

Great thanks. Had 3 accounts established which had replicated stuff from iTunes but not visible to my normal account. Have deleted the other 2 redundant and largely duplicate accounts and got back my 50+GB!

JSTL do not show result but only EL ?

hi, having problem after try the simple sample
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<body>
       <c:set var='hello' value='Hello World!'/>
       </c:set>
       <c:out value='${hello}'/>
</body>when i run the page , it only show me ${hello} ..but not the variable ..anyone have handle this issue before ?
for your information , i using tomcat 5.0.12 and jstl1.12 ,
i have already copy out the jstl.jar and standard.jar in web-inf/lib
thank you very much for helping

Sorry, wasn't clear enough.
Its not a straight replacement.
Here are the example 2.3 and 2.4 web descriptors that come with Tomcat. You can see the differences in how the header works:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Welcome to Tomcat</display-name>
<description>
     Welcome to Tomcat
</description>
</web-app>And 2.5
Note that it removes the doctype tag, and replaces the 2.3 web-app tab, including some attributes.
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">
<display-name>Welcome to Tomcat</display-name>
<description>
     Welcome to Tomcat
</description>
</web-app>
[/code[
That should sort you out
Cheers,
evnafets

Battery icon says/shows full, but it is not actually charged.

My battery icon keeps saying that it is fully charged (or when it's connected to a power source that is it "Finishing Charge...") but when I unplug it, the time says it only has a few minutes left. I've tried restarting my computer, but that didn't work. I'm not really sure what's wrong with it. I've also let the battery die out and then try charging it, but that didn't work. Anyone know what I can do?
Battery Information:
Model Information:
Serial Number: DP-ASMB016-38ea-4762
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 151
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 151
Health Information:
Cycle count: 324
Condition: Good
Battery Installed: Yes
Amperage (mA): 2050
Voltage (mV): 12187
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes

Yeah, it was purchased in August 2008. I'm not really sure what a charge cycle is, but I do plug it in and unplug it a lot to a power source. Mainly because I keep my computer on most of the time (either on or on sleep). So between taking it to classes and stuff, I'll recharge in between and when it's really low, otherwise I run it off the battery most of the time.
On a sidenote, I have went to that information thing about about the battery after letting it sit plug in for a few hours, and now it has this information:
Battery Information:
Model Information:
Serial Number: DP-ASMB016-38ea-4762
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 61993
Fully charged: No
Charging: No
Full charge capacity (mAh): 61993
Health Information:
Cycle count: 324
Condition: Good
Battery Installed: Yes
Amperage (mA): -1208
Voltage (mV): 12129
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
Message was edited by: Akalboy
Oh, forgot to note. Now the time remaining is 10 hours, which is DEFINITELY wrong.

Audio Capacity Bar showing full, but Free Space says 52.30 still...

Kind of hard to explain, but in the Summary View of mu iPod, the Audio Capacity says 1,712,986,856 then some garbled characters, then the Vido says 8.45 GB, photos 196.3 MB and again, free space is at 51.30 (it's an 80 GB video). The bar is all blue, but the iPod isn't full... Anyone see this before? It doesn't seem to be a problem, makes me nervous though. On that note, is there a way to see the size of the files on in iTunes, more like which is the largest, etc? And also on the iPod? I',m wondering if I could do like a du -ks * sort of command on the iPod and iTunes, see what are the big files, make sure it's all ok. Maybe wasted time... Anyway, any help appreciated.
JP

I just upgraded iTunes to Windows version 7.3.1 and the problem still exists for me. In the summary view, the capacity bar at the bottom is solid blue and the Audio data size displays -1,194,043,981.634. However, the number changes when I click on the capacity bar to display the number of audio songs or number of days. I have a screen shot.

Icloud shows full but only 1.6 gigs used

Similar Messages

Maybe you are looking for