Icloud synch could not start due to an unexpected error. Vista/outlook 2007

I'm trying to setup my synch options in iCloud pc app. I'm using a vista machine with Outlook 2007 and I receive an error message that says the synch could not be started due to an unexpected error. Can anyone help me get this synch started/setup? I just upgrade my iphone 4 to ios5

I'm having the same problem. There's another thread where this is being addressed, but no resolution yet.
https://discussions.apple.com/message/16334415#16334415

Similar Messages

  • Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).

    Windows 7 users in my domain are unable to configure or change backup settings.  Users are able to open Control Panel > Backup and Restore, but when they click
    Change settings, they receive the error: Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).
    The same error is received when executing sdclt.exe /configure at the command prompt, regardless of whether the command prompt is launched using "run as administrator".
    I've done significant testing, and have been able to determine that the local administrator account is able to configure backups before the computer is joined to the domain.  Once the computer is joined to the domain, the local administrator account
    and domain users who are in the local administrators group are no longer able to configure backup and restore.  Domain administrators are able to configure backups.
    This is a new issue, which began occuring sometime in the last 2 months.  3 months ago, users were able to configure backups without issue, and those computers with backups configured are still able to run their backups and do restores; however the
    settings can no longer be changed. 
    Clearly something in the domain is doing this, but Group Policy has not been altered, and I can find no setting that would be doing this in any case.  Any help is appreciated. 

    Hi,
    So you mean you have tried different accounts in the local Administrator group and all of them failed?
    If so, please check what group the local Administrator group belongs to? Does it belong to a group with limited privileges, such as the Guests group?
    Tim Quan

  • HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

    was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Or it could be an Apple problem and you will have to wait.

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • Administrator software failed to start due to an unexpected error

    Not a terribly useful message from ARD after a fresh install of 10.5.3:
    "The Remote Desktop Administrator software failed to start due to an unexpected error."
    "The Remote Desktop software may not be installed correctly or the computer may require a restart"
    It installed something in the system on first launch then popped up with this message. My main concern is that it pooched my system in the process by replacing something new in Mac OS X 10.5.3 with something old from ARD 3.2...
    Restarting now but who knows, might not be back for a while... %-\

    Kill the "ARDAgent" program, either in Activity Monitor or Terminal, and it will start back up again. When you see it running again(make sure it's a new instance via the PID), you should be able to start Remote Desktop up without any problems after that.

  • I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

    I am using a portable USB storage drive connected to my laptop.  I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it?  Thank you.

    All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
    Open the Terminal application in the Utilities folder. At the prompt enter:
    sudo rm -rf
    Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • TS2776 I used my Ipod while at the gym one day and now it's acting wacky.  I have tunes that will not download due to an "unexpected error (-50).  Anyone know what this is and how to fix it?

    I used my Ipod while at the gym one day and now it's acting wacky.  I have tunes that will not download due to an "unexpected error (-50).  Anyone know what this is and how to fix it?

    looks like the gtk theme is not the problem. didnt really think it was, but the documentation was worth posting. the guys over at ubuntu look as though they have dealt with this in great detail, and have produced a few solutions, which may or may not work. i have decided to post these for anyone else who may have these problems.
    Solution 1 - new user creation:
    https://bugs.launchpad.net/ubuntu/+bug/104521
    Solution 2 - config file delete:
    http://ge.ubuntuforums.com/showthread.php?t=724439
    post number 6 here features the config file delete solution, as well as a link to another post which may be useful.
    judging by a google search on this problem and the number of responses that came up, the bonobo/daemon error is quite a common curse for the users of gnome, although much more common in distros such as ubuntu or fedora.
    i hope that this proves useful and if anyone has anything to add, please feel free. the more documentation the better.
    EDIT:
    another solution would be to remove gnome and reinstall it from scratch. (some please tell me if i am doing this correctly. thanks )
    1. clean your catch:
    pacman -Scc
    2. remove gnome, gnome extras, and whatever other gnome files you might have installed
    pacman -Rscn gnome gnome-extra etc...
    3. reinstall gnome and gnome extras
    pacman -Sy gnome gnome-extra
    4. reconfigure your desktop the way you want.
    Last edited by czechman86 (2008-05-28 23:42:43)

  • "Could not start the linksys updater service" error message

    I purchased a WRT160N router and everything worked fine for a while. After a few days, I would lose the wireless connection. I spoke to the geeks at Best Buy, and they said the unit was probably bad, so I exchanged it for a new one.
    Before setting up the new one, I figured I'd uninstall the Linksys EasyLink Advisor software in case the new router had a different version. I then started to install the software. But now the installation fails with error message "Could not start the Linksys Updater Service". I tried manually starting it, but it aborts with an error message "The process terminated unexpectedly" .
    Does anyone have any suggestions what I should do now? 

    Well if you are trying to setup your router using the setup disk, you can exit from the setup and configure all the settings on your Router Manually.
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • Could not start Biztalk Service Biztalk Group: Error 1053 , In Biztalk Server 2010 environment

    Hi,
    I am getting following error while starting Biztalk 2010 service
    Error message :
    Windows could not start the Biztalk Service Biztalk Group :
    BizTalkServerApplication service on Local Computer.
    Error 1053: The service did not respond to the start or control request in a timely fashion
    Please suggest.
    Thank you.
    Warm Regards,
    Anant Patil.

    When did this issue start?
    Did you install something? Some update? To OS, to SQL Server, to BizTalk?
    Did you deploy some BizTalk artifacts?
    If so, try to undo this software.
    Were there some changes in network?
    Leonid Ganeline [BizTalk MVP]
    BizTalk: Sample: Context Routing and Throttling with orchestration

  • Weblogic server not starting due to connection pool error.

    Hi all,
    We have some issues with the network due to that, weblog server not able to create the connection pool or make physical connection with the database in the allocated time, we need to increase the timeout so that weblogic can wait and create a connection and then start the apps. How to achieve this?
    Currently the server crashes and forcing to shutdown the error listed below
    <Oct 10, 2012 5:08:47 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
    <Oct 10, 2012 5:09:48 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
    <Oct 10, 2012 5:10:49 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
    <Oct 10, 2012 5:10:50 PM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'oltpDS' due to error weblogic.application.ModuleException: .
    weblogic.application.ModuleException:
         at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: Socket read timed out
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:276)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
         at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:249)
         at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1155)
         Truncated. see log file for complete stacktrace
    javax.naming.NameNotFoundException: Unable to resolve 'oltpDS'. Resolved ''; remaining name 'oltpDS'
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at com.healthedge.j2ee.PooledConnectionHelper.addDataSource(PooledConnectionHelper.java:202)
         at com.healthedge.j2ee.PooledConnectionHelper.getSTConnection(PooledConnectionHelper.java:281)
         at com.healthedge.j2ee.PooledConnectionHelper.getConnectionIgnoreTxn(PooledConnectionHelper.java:268)
         at com.healthedge.j2ee.PooledConnectionHelper.getConnection(PooledConnectionHelper.java:251)
         at com.healthedge.query.execution.Query.prepareStatement(Query.java:504)
         at com.healthedge.query.execution.Query.setValue(Query.java:716)
         at com.healthedge.config.util.ReferenceResolutionHelper.setConstraintValues(ReferenceResolutionHelper.java:277)
         at com.healthedge.config.util.ReferenceResolver.getTypeReference(ReferenceResolver.java:232)
         at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:221)
         at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:211)
         at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:187)
         at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:156)
         at com.healthedge.config.eval.HicIdentifier.getReference(HicIdentifier.java:58)
         at com.healthedge.startup.StartupService.startup(StartupService.java:56)
         at com.healthedge.startup.wl.WLStartupService.main(WLStartupService.java:13)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeMain(ClassDeploymentManager.java:362)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:272)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:214)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:207)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployments(ClassDeploymentManager.java:186)
         at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsAfterAppAdminState(ClassDeploymentManager.java:162)
         at weblogic.management.deploy.classdeployment.StartupClassPrelistenService.start(StartupClassPrelistenService.java:13)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    NESTED TRACES DONE
    >
    <Oct 10, 2012 5:11:18 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Oct 10, 2012 5:11:18 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Oct 10, 2012 5:11:18 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

    Hi,
    It looks like your DB is down for now and that is reason why the server cannot initialize your App while startup.
    Check which Data source you are using and make initial capacity as zero and try to restart the server again.
    Note: you need to do this changes from JMS module under %Domain_Home% / config / jdbc/
    Regards,
    Kal

  • Web server will not start due to RSA Securid errors

    We have an iPlanet 4.1 Service Pack 14 web server that was running fine until last friday. When we go to start the server we get the following error:
    Status:
    [https-ivpnas]: start failed. (2: unknown early startup error)
    [https-ivpnas]: conf_init: Error running init function securidinit: unknown error
    [https-ivpnas]: server exit: status 1
    Error
    An error occurred during startup.
    The server https-ivpnas was not started.
    The error log also contains this additional error:
    [27/Sep/2004:10:06:57] info ( 4164): successful server startup
    [27/Sep/2004:10:06:57] info ( 4164): iPlanet-WebServer-Enterprise/4.1SP14 BB1-01/15/2004 13:04
    [27/Sep/2004:10:06:58] catastrophe ( 4164): securidauth reports: InitAceClient returned FALSE
    This website uses RSA Securid for authentication. We have contacted RSA and they think it is a webserver problem. Any insight anyone can provide would be great. Thanks!

    The error message is generated by the RSA plugin, not Web Server. RSA should be able to help diagnose the problem further.

  • Setup can not be started due to unexpected error? Outlook 2007

    Please help! I'm trying to setup icloud and it synced with my iphone and ipad but not my Outlook 2007.  I keep getting the message above... Help!!

    I found a "solution" in amongst the discussion threads of downloading iCloud v1 which I did and it seems to work now. The issue does indeed seem to be with v2 of iCloud. I'll waste no more time now...
    http://www.tomsguide.com/us/download/Tableau-de-bord-iCloud-Pour-Windows-,0313-4 3841.html
    wher e you can still find v1

  • The Remote Desktop administrator software failed to start due to an unexpected error...

    Hi all...
    Suddenly, I'm getting this error message when I try to open ARD. It was working a week ago and I'm not aware of changing anything. Any advice?
    This is the 3.6.1 version of the ARD admin and I have the 3.6.2 Client installed (that was the way it was before, too, when it was working).
    Note: I did try a fix from the forums that was posted in 2009, which required deleting the ARDAgent from the RemoteManagement folder in System/Core Services... and then reinstalling again using the Apple ARD Admin download for same. It worked for one run of the program, then the error came back.
    What do you guys think?

    bcvanbelle wrote:
    Updated from 10.5.1 to 10.5.2. System seemed slow at first, noticeable keyboard lag and otherwise sluggish. Noticed that Remote Desktop no longer worked. Installed Graphics update. No more typing lag and speedier performance. Remote Desktop still dead.
    Error message:
    The Remote Desktop Administrator software failed to start due an unexpected error.
    Hmphf.
    You may have to reinstall the Remote Desktop SW. See if that helps.
    I don't think it's a coincidence that this update "fixed" the Remote Desktop SUID warning, and it also removed the potential update from my computer which I had placed on "Ignore" since I did not need it and did not need the warning, either. So there is a connection between this update and the Remote Desktop SW.

  • "This task could not be updated at this time" Error in Outlook 2010 on Workflow Form

    Hi,
    I have setup a workflow to send task notifications to users and am getting an error when attempting to act on the InfoPath based workflow task form that appears in Outlook 2010 when clicking on the "Edit this task" button.  After clicking Approve, the
    form disappears, but after a few seconds a dialog box appears that says:
    "This task could not be updated at this time"
    The funny thing is that the task actually does get updated, but there is often a delay in doing so.  Does this warning appear because the server has a backup of workflow items to deal with?  I saw that in 2007 it meant something wasn't properly
    installed with InfoPath, but I am not sure if that is the case here or not.  Any guidance would be appreciated.
    I am using Office 2010 and SharePoint Server 2010.

    I have the same issue. If I had to guess it's because the workflow in question goes stale and has to recompile, thus it times out on the client even thou it gets submitted to the server so it eventually processes.
    Now either they need a longer time out fix, or we need some way to keep the workflow actively in memory somehow on our end for it to not do it. Preferably the longer timeout method would be best to save on ram, but I bet in bigger environments or workflows
    that get used often this won't be the issue.
    You can pretty much reproduce this if you have 2 tasks from the same workflow, the first one will give the error. then after that if you wait a minute for the workflow to get going, then close your 2nd task, it will be instant. So it's something with the
    way it's getting garbage collected and having to recompile that's causing this delay with the client and a timeout just needs extended or something to give the server a chance to finish loading up the workflow.
    Also there is a good article explaining reasons and solutions:
    http://social.technet.microsoft.com/wiki/contents/articles/2271.aspx
    Best Regards,
    Megren|Blog 

  • The service did not start due to the following error: The repository at this location is called rep_bkd_dev. Check the log for more information.

    Experts, I created repository first with the name of rep_bkd_dev (Unicode),Then my lead told that we need to create RS with MS Latin,So am trying to creating a new repository with the name of dev_repository and it is showing the below error.Can some one help me out here. Regards,

    hi I want to create a file with muiltple header detail and trailorSample of my file  1F99500094959                    5F99000000999911025F99000000999912025F99000000999913029F99500094959                    1G83341002729803                5G83000000999918020109G83341002729803                1G83910377940                    5G830000009999190201011050003522029G83910377940                    T20110720000000900000006750{  In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file

Maybe you are looking for

  • How do I add a table of contents to a PDF document created through iBooks?

    I've been working on a iBook for a while for work and it functions great on an iPad. However, when I publish it as a PDF there is no table of contents. Is there a way to have the table of contents displayed automatically for the book? I dont mind if

  • Adobe Media Encoder: introducing stairs (edge artifacts)

    Adobe Media Encoder: Is it fundamentally flawed? When exporting Flash content to video, I noticed that Adobe Media Encoder introduces artifacts around edges that have a sharp contrast. The problem does not seem to be affected by bitrate or other sett

  • How do I unlock a UK Iphone to use in Australia?

    The UK network is Vodafone and also the Australian network is Vodafone, but how do I get an Australian SIM card to work in an iPhone that was bought In the UK?

  • Need  ABAP coding in  Proxy TO File scenario

    Hi friends,   i need  to do the  Proxy to file scenario.. for this.. i want to retrive the data from R/3 system and  load the data into the class which we defined in SPROXY  (Outbound  class) .. so, can any one give me the exact coding... for this..

  • KVM Distortion

    I'm having problems with my KVM switch on my machine. I am getting distortion, all images are shifted over to the right, say 1/4" with a transparent hue. Here is my setup: Computer 1: AMD 1.3mghz Asus board Asus Geforce3 ti200 Windows 200 Server Comp