Icloud will not run after upgrade to OS8, keep getting "this phone hasn't been backed up" message

I loaded OS8 on my 5c about five weeks ago.  Since then, I have tried and tried to force a backup to icloud and fail every time.  Phone does not auto backup either.  I have an error message that says "This iphone hasn't been backed up in 5 weeks."  I am connected to wifi.  I also repeatedly get a popup asking for my apple id and password.  When I enter the info, nothing happens.  Anyone have an idea how to get icloud to work?  BTW, I have plenty of space in icloud, According to settings, 4.2 GB still available out of my free 5 GB.  Backup is turned on.

Hey chambolle,
Thanks for the question. After reviewing your post, it sounds like you are having trouble creating a backup. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Get help creating an iCloud backup - Apple Support
iCloud: Back up your iOS device to iCloud
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

  • My newly bought i pad is not letting me doing anything. it is saying 'this ipad hasn't been backed up. backups happen when this ipad is plugged in, locked, and connected to wifi'. i have tried to powered off by pressing the top right hand button

    my newly bought i pad 4(4gs), ratina display, is not letting me doing anything. it is saying 'this ipad hasn't been backed up. backups happen when this ipad is plugged in, locked, and connected to wifi'. i have tried to powered off by pressing the top right hand button till the red slide comes up. but it is not sliding to the right. could anyone help me out??

    Locked, refers to the device being plugged in with "slide to unlock" being displayed on the screen.  To recap - your device will automatically back up to icloud when it is connected to power, the screen is locked, and it is connected to a wifi network.
    -Wifi is required to limit impact on your data plan.
    -Power is to ensure the device has sufficient power to perform the backup.
    -Screen lock - to make sure the device is not in use - which could slow or stop the backup.
    The initial backup may take some time.  Plug it in to the wall before bed, and make sure it is connected to your wifi network.  The backup SHOULD be completed when you wake up in the morning.
    Hope this helps.

  • Report will not run after upgrade to new Crystal server

    My company has been using Business Objects version 11.5 Central Management Console and InfoView for Crystal reports. We are upgrading to
    SAP BusinessObjects BI Platform 4.1 Support Pack 1 Version: 14.1.1.1036 Central Management Console and BI Launch Pad. I have one report that is using a sql command for nat2date of a database value that is running successfully on InfoView but will not run on BI Launch Pad. The nat2date function is converting a random number in our database to a date and then selecting the records for the report by using the LastFullWeek function.
    ({Command.NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)} in LastFullWeek)
    Is there something I need to add to the new CMC to recognize this sql command?
    Thanks for any suggestions!

    Ok, with BI 4.1 you'll need to use Crystal 2013 instead of Crystal 11.5.  For the vast majority of your reports, you won't have to manually upgrade them because the 11.5 version will work fine in the new version of BO.
    I suspect the problem you're seeing is with the "{Command.NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)}" syntax. is "NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)" the field alias that you're returning for this function?  Or are you trying to call the function like this?  I would call the function and alias it in the "Select" clause of your command so that it looks something like this:
    Select
      ...<various fields>...,
    NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME) as FROZEN_DATE
    from
    where
    You could then change the selection criteria to something like this:
    {Command.FROZEN_DATE} in LastFullWeek.
    That will fix the report as is.
    However, when you use the Select Expert for reports that have a command, Crystal will pull ALL of the data from the query into memory and then filter it there - it will NOT push this selection criteria down to the database.  So, I usually recommend that you put all of the filter criteria in the Where clause of the command.  You could use something like this to get "LastFullWeek":
    NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME) between Trunc(Sysdate - 7, 'DAY')  and
    Trunc(Sysdate, 'DAY') - 1
    "Trunc(Sysdate, 'DAY')"  will give you the first day of the current week and "Trunc(Sysdate -7, 'DAY') will give you the first day of the previous week.
    If you do it like this in the where clause, you may not have to include the "Frozen_Date" in the select clause.
    -Dell

  • My Epson Scan software running my Epson Perfection v500 Photo will not run after upgrading to mavericks. Any suggestions?

    After upgrading to Mavericks I find that the Epson Scan software will no longer run so I cannot now use my Epson Perfection V500 Photo scanner. Is there a solution to this? If not can I delete Mavericks and go back to Mountain Lion?

    Hi...
    Epson is working on new drivers / software for this scanner.
    Until then, you can perform basic scanning from Image Capture.
    Or go for 3rd party app. like vuescan.
    Regards
    Dennis

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • CS5 will not open after upgrading to Yosemite

    CS5 will not open after upgrading to Yosemite

    Hi Clickchris,
    CS5 Photoshop is supported on Mac OS 10.5.7 and 10.6.
    It has not been tested on Yosemite as it is a very old version of the product.
    Please refer to below document.
    http://helpx.adobe.com/photoshop/system-requirements.html#main_Photoshop_CS5_system_requir ements
    Thank you for posting on Adobe Forums.

  • Quicktime will not open after upgrading to "Snow"

    Quicktime will not open after upgrading to "Snow". The light underneath the dock icon lights up but the application does not open. Suggestions?

    Actually, wasting bandwidth is a waste of people's resources who offer to help here. You posted and got answers to your post. What you thought of that would be better (for you) was posting it in every corner of AD that might get read would give you a response 30 nanoseconds faster than posting once. So read your answer and enjoy your computer.
    All you need to do is post in the right forum section, and wait for a response. It will come unless nobody has a clue which rarely occurs.

  • ITunes will not launch after upgrade--click, bounce bounce, nada

    iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
    then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
    iTunes current version
    on imac w/10.6.8

    I have the same issue.
    Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
    Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
    The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
    Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
    Thanks!

  • Lync mobile app will not launch after upgrade to lollipop on HTC One (M8)

    Lync mobile app will not launch after upgrade to lollipop on HTC One (M8). Is this a known issue or is a fix available?

    Hi THGutz,
    Did you install the latest version of Lync for Android ?
    The current version of Lync for Android is
    5.5.3.8935.
    I don’t test it on M8, but on other Android 5.0 devices it works fine.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Premier elements 12 will not run after re-install

    Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

    scottg
    Please review the following for possible solutions to your Premiere Elements 12 issue.
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    Looking forward to learning of your results when your schedule permits.
    Thank you.
    ATR

  • My iMac 27 medio 2011 will not sleep after upgrade

    My iMac 27 medio 2011 will not sleep after upgrading to Yosemite. No problems before upgrading.
    And yes, I have disabled wakeup via bluetooth.
    Anyone else having this issue after upgrading?

    No one else having this issue?

  • Facetime will not work after upgrade to io6 can anybody advise?

    Facetime will not connect after upgrade to IO6 can anyone advise?

    Hey there,
    Maybe start here
    [Troubleshooting Automatic Software Update in Mac OS X|http://support.apple.com/kb/HT1569].
    Otherwise, try deleting this file. com.apple.SoftwareUpdate.plist located at /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
    Have you tried resetting your widgets by hitting Command-R? If that doesn't, work trying trashing the two dashboard preference files.
    The two dashboard preference files are in the following directory:
    yourusername -> Library -> Preferences ->
    The file names are:
    com.apple.dashboard.client.plist
    com.apple.dashboard.plist
    Hope this helps.
    B-rock

  • Finder will not run after re-start

    Finder will not run after a re-start. Any quick fixes?

    scottg
    Please review the following for possible solutions to your Premiere Elements 12 issue.
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    Looking forward to learning of your results when your schedule permits.
    Thank you.
    ATR

  • Icloud backup - my ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in locked and connected to WiFi". Even after doing what is said, I am not able to do anything with the iPad -

    My ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in, locked and connected to WiFi". Even after doing that, I am not able to do anything with the iPad - neither able to reboot nor able to get to the homescreen. The dialogue box doesn't go at all even after pressing OK a hundred times. I treid tacking the back up through itunes and through 3G conncetion but of no avail. Please help

    I too have been having this issue since about 12/14.  That is around the same time I got the Ipad for my kids.  I am unsure if it is related.  I have tried logging out of icloud/deleting it and trying again.  Removing most of the apps to sync.  I reset my router.  All of the attempts have produced zero results.  I will be anxiously watching this thread for some help.  Good luck to you also

  • Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

    Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

    Pablos1966 wrote:
    Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
    No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
    Why don't you have the original Apple ID? Where did you get the phone?

Maybe you are looking for

  • ERRO: Portal de Notas Fiscais com HTTPS e PI

    Pessoal, Estamos com um problema para exibição correta através do PI pelo Portal das NF-e's com o uso do HTTPS. Com o protocolo HTTP, funciona normalmente, mas com o HTTPS não. Alguém já passou por isso e por dar alguma dica? Abraços.

  • Blue screen of death (not iWork's problem) on 5s

    I've heard of people having the blue screen of death before. But unlike others my 5s just went to a blue screen on the App Store. Then it shut off and when It turned it back on it just went to the blue screen. It faded from blue then white and then t

  • User Exit for T.Code : F110 - APP

    Hi Guru's, My Company is developing the interface to 3rd party system. For that i have to send the all payment data to customized table. From custom table to 3rd party system. So Please Suggest the Suitable User Exit for F110 - Automatic payment Prog

  • How can i submit the page periodically(scheduling)

    Hi , I have created IR report by using sql query like.. EG : select apex_application.checkbox(1,empno),ename,sal from emp; And i created SUBMIT button and in the process calling the procedure by using empno as a parameter. Here my requirement is that

  • Deleting podcast episodes permanently

    I have an ipod, ipad, itouch, but my PC is not an Apple product.  How do I delete a podcast episode from a device and keep it deleted from all devices?  Whenever I update they come back.... Also, how do I delete all podcasts from my iPad only with th