ICloud with iPhone 1st gen

Hi there - a friend of mine is long term user of MobileMe and asks me if there will be a possibility for him to get his email on his old iPhone 1st gen after going to iCloud. Can anyone give me some insight on this matter? Thanks in advance.

On the first gen, he can't upgrade to iOS 5, hence he can't use iCloud, which requires iOS 5.  His mobileme will eventually go out of service at the end of June, so he is definitely near the end of using his MobileMe email unless he gets a newer generation iPhone.

Similar Messages

  • Calendar sync in Maverick with out iCloud, iPhone 1st gen

    I would like to ask how to sync calendar with my iPhone 1st gen in Maverick? (With out iCloud??)

    "Apple does not put your personal info into iCloud. You do."
    Of course 'we do'. We are not robots as yet.
    The point being that apple is trying to force us, i.e., eliminate all choice for those of us who are on mac platforms to have to use iCloud to sync our calendars. I do not want my personal information and the minutia of my daily life anyplace other than in my personal possession, thank you very much.
    For the first time ever, I feel as if I may be forced to leave the Apple environment.
    Maverick is a mess with too many problems and in reality is really in a beta state.
    Sadly, Apple is loosing its luster.

  • HT201210 my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

    my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

    Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.

  • US iPhone 1st gen in the UK

    Hi all, I have been given a iPhone 1st gen from my relatives in the USA (they upgraded to the 3G). They had this phone on contract with ATT in the US.
    I am in the UK and wanted to get a Pay as you go SIM with o2, would the phone work here?
    Any help appreciated.

    U.S. iphones are carrier locked to AT&T, as most iphone are carrier locked to their countries official provider.

  • How to unlock iphone 1st gen and it be like an ipod touch

    how to unlock iphone 1st gen and it be like an ipod touch

    To activate your phone, you need a SIM card from the carrier to whom it's locked.  The SIM needn't be active, but it needs to be present, nonetheless. 
    There's no way around this step.

  • HT201412 i restore my original iphone 1st gen

    Im trying to Restore for the 1st time my original iphone 1st Gen and when the iphone try to re boot, it stay loading in the apple logo screen, i think its the 1st screen when loading it say that it could take an hour to reset and its bean 2 days and its still loading or booting in the same apple logo screen and nothing....
    i need help ASAP!
    thanks

    Yes ,see here
    http://support.apple.com/kb/ht3406

  • Can i unlock iphone 1st gen. through ituens?

    Can i unlock iphone 1st gen. through ituens?

    i came to know that apple is allowing every body now to unlock their 1st gen iphone ONLY through ituens
    is it right?

  • Why doesn't Nike+ work with the 1st Gen Ipod touch with 2.1 software?

    Why doesn't Nike+ work with the 1st Gen Ipod Touch with 2.1 software?

    The second gen iPod Touch has firmware version 2.1.1(5F138) whereas the 1st Gen only allows 2.1 (5F137). Don't know if that has anything to do with it, but it's likely.
    Why doesn't Apple allow those with the Nike+iPod sports kit to use their external sensor on the 1st Gen iPod Touch?!?! I can't see why the sensor would be incompatible with the right firmware upgrade!!

  • Can't restore from iCloud with iPhone (iOS 6.0.1) if backup was made using iOS 6.1

    I lost my iPhone, got a new one then I was grateful a was using iCloud but...
    iOS 6.0.1 won't allow me to restore my last backup because it was made using ios 6.1.
    There is not way to select this backup. Luckily for me, there is still a old backup made using iOS 6.0.1.
    So I reconfigured the iPhone as a new phone, updated the software to 6.1.
    http://support.apple.com/kb/TS4036
    Unfortunately, in order to restore a backup from the cloud, I had to reset the phone. So It went back to iOS 6.0.1
    Is there a different way to retrieve a backup from iCloud?

    If you plug it into a computer to install the update and then the backup, it should work. (At least, it did with my 4th Gen iTouch).

  • Back up Iphone 1st Gen to a new Imac

    Could someone tell me, how can I backup my Iphone 8GB (1st Gen) to my new IMAC? I would like to the have the current contents of my Iphone back up in new IMAC.
    Thanks.
    ike1906

    Not sure what you mean by back up.
    When you sync a back up is done. It does not include music and photo library photos.
    Why would you not move your info/music/pics/etc from your old computer to your new one?
    Iphone will sync music and photos from ONE computer at a time. When you sync to a different computer, the current pics and music will be erased.
    If you have at least one unique contact and calendar entry in your new computer, then you will get the option to merge the data. If you don;t, then that will be erased as well.
    It is much simpler to move the data from the old computer to the new one, then sync.

  • Unable to set up dual band with my 1st Gen Airport Extreme

    Not sure if my 1st Gen Airport extreme supports this but I unable to figure out how to setup dual band networking.  I have certain devices that work on 2.4 Ghz and some that work on 5ghz.  I trying to improve my network speed by separating the devices that can use 5ghz.  Any advise please?

    1st Gen AirPort Extreme will do either 5 GHz or 2.4 GHz....but not both simultaneously.
    Simultaneous dual band was introduced in the 3rd Gen AirPort Extreme.
    Simplest solution.....the current AirPort Express will do simultaneous dual band. You could then reconfigure the AirPort Extreme to extend the 2.4 GHz network for increased coverage.
    Be careful with 5 GHz as this is pretty much a "same room" or "line-of-sight" deal since 5 GHz signals are much weaker than 2.4 GHz signals....they won't penetrate through walls or other obstructions nearly as well as 2.4 GHz signals.

  • MacBookPro8,2 (AKA Early 2011) will not Sync with AppleTV 1st gen

    I have a MBP (MacBookPro6,2) purchase Dec 2010 and a new Thunderbolt MBP (MacBookPro8,2). My plan is to give the "Older" MBP to my daughter who has a PowerBook G4.
    Upon receiving the new machine, I used Apple's Migration Utility to transfer all my data and settings from the 2010 MBP to the 2011 MBP. All my iTunes Media is on an External Hard Drive that I connect as needed via FireWire 800. iTunes is version 10.2.1 on both machines.
    A problem arose when I tried to sync new iTunes content from the 2011 MBP to my 1st gen AppleTV. The 2011 MBP will not sync, giving the Error Message: "Apple TV "My Apple TV" is not responding. Check that any firewall software running on this computer has been set to allow communication on port 3689."
    I "Uninstalled 'Little Snitch' and turned off the Apple firewall on the 2011 MBP; (i left them alone on the 2010 MBP as there were no problems with that set up on that machine.) No joy. I reset the Apple TV to Factory Defaults and then tried to SetUp and sync from the 2011 MBP again; but again no joy.
    From the 2010 MBP, I "Restored" the Apple TV to factory setting, updated the ATV software and then was able to sync all my data with no problem.
    Now, the 2011 MBP is running a special version of MacOS 10.6.6 (10J3210). The 2010 MBP is running the Release Version of MacOS 10.6.6 which is Build 10J567. Other than that, the two machines are clones of each other.
    Any ideas why the 2011 MBP shows this error and refuses to sync? I did call Apple Support. They had no clue and referred me to a Genius Appointment.

    I got the same problem Driving me nuts!! And of course, no help from apple...

  • Please help me with this 1st gen ipod Nano question!

    Unfortunately, my 1st gen Nano just died, most likely due to the heat in my car since I played it in there all the time. Now I have inherited an old 2nd gen Nano and would love to be able to transfer all the music from my dead 1st gen to this one. Is it possible without the computer that had all the music from my 1st gen? (the computer died long ago as well!) Is there a way to transfer the music from nano to nano without a computer? Or am I just out of luck...? Thank you for any help you can offer.

    Just so I understand, your Nano is dead, the computer you used to sync it is dead, and I assume you have no backup.
    Is that right?
    Anyway, you can't copy music directly from one Nano to another, dead or alive.
    See if this helps: How to use your iPod to move your music to a new computer
    I believe you will need to download all your iTunes purchases to a computer and sync it with the replacement Nano. You do not have to pay for previous iTunes Store purchases again.
    Launch iTunes on a computer.
    Click on iTunes Store on the left
    On the right you will see this
    Click on "Purchased" (with the orange blob)
    On the summary page that appears select the tab "Not on This Computer" on the right.
    On the list that appears, select what you want and then click the "Download" button.
    To play what you download, you will need to "Authorize this Computer" for each computer you wish to authorize. This only has to be done once. There is a limit of five computers that you may authorize.

  • Set up iCloud with iPhone and iMac, and all my calendar items disappeared from my iPhone.  Help?

    I had a full calendar on my iPhone4 before I activated iCloud on my iMac and iPhone.  All that's left on the iPhone calendar are a few birthdays.  Can someone please tell me how to sync my iMac with my iPhone via iCloud (boy, that's a lot of "i's")??

    If you are going to use iCloud then stop using iTunes. Set up 2 user accounts on your PC, one for you and one for her, in each account enter the correct iCloud credentials (ie: yours for you and hers for her), do not sync the items that are on iCloud with iTunes, it will make a mess.

  • Can I replace a broken 4th gen. screen with a 1st gen. screen?

    My brother dropped his 4th gen. touch and the screen broke. He also has an old 1st gen. touch. Can he put the 1st gen. screen on the 4th gen. touch?

    Apple prices for an exchange iPod:
    Apple - Support - iPod - Repair pricing
    Some third-party places:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    DigiExpress.us - The iPad Repair Professionals
    iPod Touch Glass Replacement
    iPod Touch Repair

Maybe you are looking for

  • Three invisible volumes eating up disk space

    I used Carbon Copy Cloner to load up a new external drive with the contents of my MBP. After it finished my Users folder it began copying "Volumes / LaCie 500GB." It wouldn't show up in Finder, so I presumed it was an invisible file, as best I unders

  • Forte 6U2 - poor performance of std::map::operator[]

    I discovered to my horror this morning that Forte 6U2 implementation of std::map (at least at the patch level I'm working with) ALWAYS default constructs a value_type when operator[] is invoked - even if value_type already exists in the map. Any reas

  • Equipment Selection/Setup Help

    I'm helping someone setup a network in their new office and want to see if my equipment selection is correct.  The products of the Small Business suite seemed to meet our needs as best I could tell. There is a dizzying array of products to choose fro

  • Is there an alternate Web program to replace iWeb?

    Is there an alternate Web program to replace iWeb since it is no longer being supported by Apple?. I have a very large program that took over 5 months to design and publish. If I have to give up iWeb, I need to import all the info into a new web prog

  • /1CN/CRMSAP_PART ddic error while client copy

    Hell Gurus I am doing local client copy. My source client is 000 and target is 210. But in between it is giving ddic error for table /1CN/CRMSAP_PART But copy is still going on. Please suggest what went wrong. Regards Yogesh