ICM 8.5 and higher : Max number of scripts and CT

Hey all,
I was wondering if any of you had encountered limitations in :
     -the number of scripts (both active versions and number of versions you can keep)    
     -the number of call types
in an ICM 8.5 or higher version system?              

Thanks for this feedback David.
Our project is currently still being deployed and we will have about 12000 agents (simultaneous connections). We have not yet done all the scripting as not all the sites are in production yet, but the number of call-types in the end will probably be close to 10000.
Emmanuelle

Similar Messages

  • E-edition freezes up with 1A.pdf The max. number of files are already open no other files can be opened or printed until some are closed , showing four of five and computer froze any I must close by shutting down manually.

    My online E-Edition newspaper will freeze up after loading the front page and gives me the message that the max. number of files are already open and no other files can be printed or opened until some are closed. 1A.pdf. When you click ok it repeats itself and you have to force shutdown by holding off button. I'm totally stumped.

    I have read that "1000" is default maximum for Acrobat 4 or Acrobat 5 (I don't remmember it exactly anymore). Concerning my PC and RAM. I have a high-end graphical computer at my office; so I'm sure the RAM memory is not the reason.
    Anyway, thanks for answer.

  • What's the max number of E1 on 3845 and max number of E3 ports ?

    kindly support me witjh the refrences that provide max number of E1's on 3845 and number of E3?

    “Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main  This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.”

  • Is there a max number of Apple pro prints allowed per order? I tried 300, then 65 and neither worked. At $2.99 per for shipping, it is expensive to order 20 sets when I used to do just one for all.

    Is there a max. number of Apple pro prints allowed per order with the updated iPhoto/Mountain Lion?
    I have been using the system for years and have had no issues, but this first try under Mountain Lion I was told the max was 300 prints per order.
    It order did not go through, nor did one with 65 photos.  When I tried 2, it was fine, but at $2.99 shipping, plus tax,
    paying $60 to get all 300 of my photos shipped is unreasonable.
    Is this a glitch in the new OS?  Hopefully it will be fixed.

    Hi blabla12345,
    (untested and without warranty)
    replace this line:
    const sSaveCUBE = "CUBE";
    with this:
    const sSaveCUBE = "cube";
    Have fun

  • How to limit max number of downloads at once (and create a download queue)

    I just "upgraded" to Mozilla 26.0 last night and was quite irritated that they changed the made it so that I cannot access the old download window. Was it really necessary to get rid of the work-around to get to the old download window?
    Anyway, besides being more visually appealing, it previously downloaded two files at a time, unless I manually forced it to do more. The rest of the files would go into a download queue to wait their turn. After the update, it no longer creates a queue, leading to much slower downloads and it also slows my computer if I download too much.
    Is there any way that I can limit the max number of downloads (unless I want to force it to download more) like I had on the previous version of firefox? I would prefer not to add more any add-ons, so if there is an check-box that I missed somewhere or something in about:config that would allow me to do this it would be better.
    Also, is there any way to pause downloads now?

    Check these 2 articles
    https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file?esab=a&s=how+to+put+a+file+in+download+queue&r=2&as=s
    https://support.mozilla.org/en-US/kb/find-and-manage-downloaded-files?esab=a&s=limit+maximum+number+of+downloads+and+create+a+download+queue&r=1&as=s
    This might help you.
    Thank you.

  • Max number of Hits Account Identification

    Hi all,
    we are currently having the problem in IC that when somebody try to identify an account of an BP with more that 100 related sold to parties, that no account is displayed because of the standard max number of hits 100.
    I have found the path to customize this in the SPRO but this sentence in the SAP help is making me some headache:
    The higher the number you enter here, the more results the system will search for, and in turn, the more performance is affected. The maximum number of hits that the system allows is 100, which is also the default value.
    I understand the point of the performance, but does this mean that the performance is also affected the account identification of the other BP with less than 100 related sold to parties?
    Can anybody help in this issue?
    We are working on CRM 5.0.
    Regards
    Abosi
    Edited by: Abosi_3li2 on Feb 8, 2012 11:08 AM

    Hello
    The bug of nothing displayed if over 100 accounts are found is solved with [SAP note 1467929|https://service.sap.com/sap/support/notes/1467929.]
    The code you are referring to is:
    IF bpident_profile-max_hits IS INITIAL.
    max_hits = 100.
    ELSE.
    max_hits = bpident_profile-max_hits.
    ENDIF.
    It means that, if blank, 100 hits is considered. You can modify the customizing up to 255 results since that is the limit of accounts to be found.
    Regards
    Joaquin

  • Max number of persons in contact groups - Nokia Lu...

    The max number of persons allowed in a contact group is (as far as I know) restricted to 20 persons. This seems very low and I wonder why this restriction is applied. A limitation of 20 persons in a group is not practical. Any explanation or any idea if this can be changed in the future?

    As you've discovered the maximum number of contacts you can have in a contact group is 20.  If you'd like this limit to be changed to a higher number you really should post a request or add your votes to a similar request on Microsoft's user voice fo....  This is the place that Microsoft created to field user requests for enhanced options for windows phone.
    Microsoft MVP Windows Phone

  • Max number of connection for adapters

    Hi PI/XI Experts,
    I have a WS to Proxy Syncronous scenario. I need to know how many client could consume the web service at the same time? Are there any limitation? If so what is the max. number? and where it can be changed?
    There is another question that how many of the WS clients message could be processed via ABAP Proxy? It is important to transport the all the messages to ABAP Proxy at the same time as much as possible.
    Kind regards,
    Altuğ Bayram

    Hi Raj,
    Where you get this knowledge? When i do search before this message i only found about RFC adapter max connection limitations. Every server/adapter should have a maximum capacity. Maybe it is high number for WS and XI adapters but i need to know what it is. If you how can i find it please share the information.
    Kind regards,
    Altuğ Bayram

  • Max. number of WLCs per WCS

    Hi,
    I know this is a fairly basic question but I can't find answer in WCS Q&A's etc.
    I'm looking at a deployment where there will be many small sites with only 5 or 6 APs and a 2106 WLC. Each site will be in a different mobility group.
    I know WCS licensing counts APs, but is there a max. number of WLCs?
    Thanks, MH

    Hi Mark,
    The supported number of WLC's per WCS is based on the WCS Platform used :)
    Minimum server requirements
    Cisco WCS High-End Server
    • 3000 lightweight access points, 1250 standalone access points, 750 wireless LAN controllers
    • Two Intel® Xeon Dual Core CPU's; 3.0 GHz, 8 GB RAM, 200 GB HDD
    Cisco WCS Standard Server
    • 2000 lightweight access points, 1000 standalone access points, 150 wireless LAN controllers
    • Intel® Dual Core CPU; 3.2 GHz, 4 GB RAM, 80 GB HDD
    Cisco WCS Low-End Server
    • 500 lightweight access points, 200 standalone access points, 50 wireless LAN controllers
    • Intel® CPU; 3.06 GHz, 2 GB RAM, 30 GB HDD
    CiscoWorks WLSE Models 1130-19 or 1133 running Cisco WCS
    • 1500 lightweight access points, 100 wireless LAN controllers
    • Intel Pentium 4 CPU; 3 GHz, 3 GB RAM, 38 GB HDD
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd802570d0.html
    Hope this helps!
    Rob

  • Is there a max number of names that can be put into Contacts

    is there a max number of names that can be put into Contacts and still have the app work well?

    Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

  • Max number of chars in process message MSEL?

    Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
    Thanks and points available

    Please make sure that you build a
    multithreaded program first (check with ldd).
    If anyone can tell me the maximum number of threads per process I would
    really appreicate it.
    Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
    64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
    Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
    HTH,
    -vladimir

  • "max number of thread"

    We are running a java web app on a Ubuntu Oracle WebLogic server version 10.3.3.
    The java web app performs long polls with open tcp socket to keep the client connection open. The clients are long polling the WebLogic at 30 seconds.
    Currently we are not able to maintain stability for greater than 24 hours with approximately 200 simultaneous sessions on WebLogic server. Session to me is active client/server tcp connection. We have re-written our application to use continuations, but we are seeing ConcurrentModificationException errors in performance testing.
    Is there any setting in WebLogic for “max number of thread” that can handle?
    Edited by: user9316392 on Jul 8, 2010 11:07 AM

    First, WebLogic since 9.0 has a self-tuning thread pool where WLS will automatically grow and shrink the number of threads based on some internal algorithms. I'm not aware of a hard limit so theoretically there is no max thread count as long as the JVM has memory and WLS thinks more threads will help. You can read up on it here:
    http://www.oracle.com/technology/pub/articles/dev2arch/2006/01/workload-management.html
    Practically, I wouldn't expect more than several hundred threads to be helpful.
    As for your situation, how does WLS become unstable? Out of memory, out of file descriptors, errors on new requests, etc. I think you're going to have to use some JVM tools to see what happens to your JVM over time. Is there a memory leak somewhere, is it non-heap memory, etc. JRockit Mission Control is helpful if running on JRockit. If you're on Sun Hotspot, them presumably you can use some of the Hotspot tools. You'll want to compare the state of the JVM towards the beginning of your load test, but after a slight warm-up period with a snapshot after the load test has been running for a long period of time.

  • Max number of buffers

    For fast image grabbing I wand to store images in the memory of the PC. To do this I use LL ring buffering. The max number of buffers is limited by Labview to 50. I tried to increase this by MAX >>Tools >> IMAQ (like suggested on the site) but Labview keeps setting it back to 50, also after rebooting. How can I get this to a higher value?

    Hi,
    Take a look at this document:
    http://digital.ni.com/public.nsf/websearch/FCA602CDBC4EDCEA86256BB1005AB1F2?OpenDocument
    This limit is no longer a issue in NI-IMAQ 3.0.1, (except for the NI-1408)
    Met vriendelijke groet / Kind regards,
    Karsten
    Applications Engineer
    National Instruments

  • Max number of dataproviders in the same workbook

    Hi,
    Do you know please what is the max number of dataproviders (recommanded by SAP) we can use in the same workbook / Bex analyzer?
    For information, we are in BI 7 based on excel 2003.
    Thx.
    Radj.
    Edited by: Radjech Radjech on Dec 3, 2010 12:24 PM

    One suggestion is:
    Each tab (copy of the query) would have distinct filter value(s).   In workbook settings,  Uncheck "Allow Refresh of Individual Queries".   Also in WB settings, Do Not Refresh at Opening.    For the entire 50-tab workbook, the filter is limited to a minimum:  company code and the date range because the other filters are hardcoded in each tab.    When you refresh and change variable values at opening the file, all you enter is the company code value and the date
    You might also want to change the Grid Properties:  Uncheck Apply Formatting (for performance); and Uncheck Allow Navigation.  You can add these back later.   Might as well uncheck Sort.
    I have my own question about the DPs.  Can you rename them from the generic Data Provider 1 or copy of Data Provider 1?
    Susan McLeod

  • What is Max number of schema in a single DB ?

    Hi All,
    I have small query does anyone have any idea about
    What is Max number of schema in a single DB we can specify in oracle ?
    Thanks n advance.
    Anwar

    You don't say which version of the database you are using. In 10gR2 the maximum limit on users and roles is 2,147,483,638.
    I think this is more users than any sensible DBA would want to manager :)
    Cheers, APC

Maybe you are looking for

  • Best way to report on multiple libraries

    SharePoint 2010. We have 1,600 subsites all the same forms library, which has 10-15 content types in: All the content types have these fields that are published to the library.  All the  fields are the same.   Each file has unique naming conversation

  • Extract fractional part of division

    Hello, I am trying to acomplish having the case show up TRUE, if input 2 is a close multiple of Input 1.  In the default case provided, the ramainder is 3.00001837.  I was attempting to extract the fractional part of the division and pass that value

  • Can professional software and 3D graphics be used in Boot Camp Beta 1.3?

    I am using professional equipment that normally operates on a Windows OS with software using .NET Framework 2.0, DirectX 9.0c. - If I am to use this software do you think it will work in Boot Camp Beta 1.3 using Windows XP Pro (2)? - The software has

  • Mini sap performance

    Why in Min SAP, all the functionality is not working properly? Screen painter is not working. problem in creating new entries in tables and more. hav I missed something while installation or there is some setting to b adjusted. plz help. thanks.

  • Why is there no Verizon Interactive Simulator for my iPhone 5s?

    Why is there no Verizon Interactive Simulator for my iPhone 5s?  The Verizon page for obtaining a Verizon hotspot is available for all phones except Apple, why?