ICM ERROR , service: 50200 failed (NIECONN_REFUSED) [icxxpool_mt. 1965]
Hello,
I have this error in the ICM transaction "SMICM" and display all. in System: SAP ECC 6.0
ERROR => Connection request to host: localhost, service: 50200 failed (NIECONN_REFUSED) [icxxpool_mt. 1965]
This system is for E-Recruiting and we have a J2EE and Abap.
The thing is that i have the same error in SRM:
] *** ERROR => Connection request to host: localhost, service: 50900 failed (NIECONN_REFUSED) [icxxpool_mt. 1965]
BUt in this case the problem was fixed: Deleted the value icm/HTTP/j2ee_0, because Since rdisp/j2ee_start = 0 it makes no sense to have any value in icm/HTTP/j2ee_0.
But in the first error in the system of Recruiting i have ABAP and J2EE.
Do you have any idea, please'
I really apreciate it.
Thanks!
Hello
the error in the ICM trace:
"*** ERROR => Connection request to host:
localhost, service: 50200 failed (NIECONN_REFUSED)"
indicates that the j2ee engine was not available over the http port.
Can you please review SAP note 733204 which I think may help here.
Thanks
Kenny
Similar Messages
-
Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj -
Service 'MSExchangeTransport' failed to start
Good morning all,
I am trying to install exchange 2010 on a Windows 2008 R2 sp1 server. We have an existing exchange 2003 instance on our old server, a windows 2003 sp2 SBS server. We had an awful lot of DNS problems and active directory troubles when getting
this server installed (its a domain controller) but everything seems to be ok. However, whenever I try to install exchange I get the following error:
"Service 'MSExchangeTransport' failed to start. Check the event log for possible reasons for the service start failure"
I've ensured that IPv6 is enabled, I've checked that the .net port sharing service is started and I've tried changing the service to run as a local user with access to the desktop, I'm still getting the same error.
Any ideas?
Thanks.Hi
Do you see any event error ?
You can open ExchangeSetup.log and find out the reason.
I just search same cases.
The cause of the problem is that the msExchServerSite attribute on the server object does not get updated automatically and the Microsoft Exchange Service Fails to start.
open adsiedit
a. Browsed to location: CN=USA,CN=Sites,CN=Configuration,DC=exchange,DC=local
b. Copied the distinguishedName value of the site and pasted it in a notepad.
c. Again browsed to location: CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Exchange,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=exchange,DC=local
d. Kept refreshing this location until my Exchange 2010 HT server name papered there. The moment it appeared I did the below steps real quick.
e. Opened Properties and located attribute:
msExchServerSite
f. Double clicked on the attribute and pasted the value that I copied from site distinguishedName. -
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
During the installation of Itunes I get the following error: Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privledges to start system service. I then have three buttons abort, retry and ignore. I have hit each button once and got no good results.
Chaps and chapesses,
I too was having the same problem when I tried to update and then unfortunately uninstall and re-install itunes. But, like Nige above me says, you need to uninstall all your Apple software and then re-install itunes.
Have a look at the response given to this forum post:
https://discussions.apple.com/thread/5819470?tstart=0
I did exactly as the turingtest2 said:
I removed all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Then I restarted my computer, and the install of itunes worked like a dream. None of this ignore, abort, cancel nonsense.
Hopefully all your respective versions of itunes will work soon. Cheers Nigel280 -
when installing itunes I received the following error "service Apple Mobile Device failed to start, verify you have sufficient privileges to start system services"
Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated. -
During the latest iTunes download I received the following error: Service '(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
Please Note I am the system Administrator
-
I live in the US but am in Paris for three months. I can't access itunes. I tried reinstalling but got this error: Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I followed the Apple troubleshooting advice--delete temp files, uninstall itunes, shut down computer, restart, reinstall. What's the problem and, especially, what's the fix? Walter Cohen
I, too am having the same issues as above like the many others. For days i have been trying to uninstall reinstall as per troubleshooting but to no avail.Apple, you need to fix this!
-
SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions? -
Multi-lingual Error: The translation failed because the online translation service was unavailable
Hi,
We need to implement multi-lingual functionality in SharePoint 2013 on premise server. We have implemented the functionality by referring the below URL.
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/12/sharepoint-2013-variations-creating-site-and-variation-labels.aspx
But after this once we translate any page/document, we are getting below error.
Error: The
translation failed because the online translation service was unavailable. Please resubmit this file for translation. If the files fails again with this error message, contact system administrator.
Machine
We have configured the internet over SharePoint server, also referred below url, but
no success.
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
http://technet.microsoft.com/en-us/library/jj729796(v=office.15).aspx
https://social.msdn.microsoft.com/Forums/office/en-US/dcd0e1d3-2b26-41fa-ad07-77fe234fbc23/machine-translation-service?forum=sharepointdevelopment
If you have faced a similar issue and has any information on how to resolve this issue or how to achieve multi-lingual functionality or configure machine translation service in SharePoint 2013,
it will be great help.
Regards,
Shailendra GuptaHi Shailendra
Please check this below
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7bf9604-d652-4566-aac5-6bcb10dd6ce5/failed-because-there-was-no-translation-available-online-translation-service?forum=sharepointgeneral
Please remember to click 'Mark as Answer' on the answer if it helps you -
ITS service interpreter failed error code 0x2101
Hi!
I am trying to access a transaction without a user having to logon manually. When opening the following link in the browser I am able to access the transaction without manual login:
http://itshostname:port/scripts/wgate/cv03n/!?client=010&login=username&password=test&language=DE&draw-doknr=10000009472&draw-dokar=999&draw-dokvr=02&~okcode=/0
However, the user and passwort are shown in cleartext and I do not want that for security reasons. AFAIK the way to achieve this is setting the parameters in a service file on the agate. Put the file cv03n.srvc in the service directory:
~client 010
~login username
~password test
~language DE
~transaction CV03N
After restarting the agate service and opening the follwing url I expected to see the same transaction as before when I put the parameters inside the url:
http://itshostname:port/scripts/wgate/cv03n/!?draw-doknr=10000009472&draw-dokar=999&draw-dokvr=02&~okcode=/0
Instead I got the error message:
Interpreter Failed
The Internet Transaction Server failed to generate the response for current request.
Please contact the system administrator.
Internal error code: 0x2101
I also tried to crypt the password. Additionally I tried to set only one parameter in the srvc file (client). Always the same error. Does anyone have an why I get this error as soon as a parameter is put into the service file?
SAP ITS 6.20 Patchlevel 18
SAP R/3 4.7
Browser IE 6.0 SP1
Greets
ChristianHi Christian,
as far as I can see you did anything right. Do you find further hints in your trace files when this error occurs?
Regards Ralph
EDIT
I just saw you created this service new? If yes you need to copy the other values from your webgui.srvc to your new service file, too (esecially ~webgui 1)
/EDIT
Message was edited by: Ralph Resech -
Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start
Hi,
I've been trying for weeks now to try to get Office Professional Plus 2013 to install on Windows 8 Pro. My system has been running perfectly otherwise.
When I try to install Office 2013, I get the following message (excerpt from log file):
2012/11/27 22:26:30:885::[4576] MSI(ACTIONSTART): 'Action 22:26:30: StartServices. Starting services'
2012/11/27 22:27:00:949::[4576] MSI(ERROR): 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:00:949::[4576] Log level changed from: Standard to: Verbose
2012/11/27 22:27:00:949::[4576] Showing message Title: 'Setup', Message: 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:05:964::[4576] Message returned: 4
2012/11/27 22:27:05:964::[4576] WER is not considering last MSI error event
2012/11/27 22:27:39:105::[4576] MSI(ERROR): 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:39:105::[4576] Showing message Title: 'Setup', Message: 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:30:59:948::[4576] Message returned: 2
2012/11/27 22:30:59:948::[4576] WER element [P5] is set to value [Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.]
2012/11/27 22:30:59:948::[4576] WER element [P5] is converted to [1920]
2012/11/27 22:30:59:948::[4576] WER element [P7] is set to value [0x780]
I have tried everything I can think of, and everything on every thread I've found on related topics. No luck. If I try to start the service myself via services.msc I get the following message:
The Windows Font Cache Service service on Local Computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs. Any assistance anyone can provide would be greatly appreciated!Hi micrey! It works!
1. Type “services.msc” into the Start Search
bar and hit Enter.
2. Find the Windows Font Cache Service, select
it and hit “Stop”.
3. Open Windows Explorer and navigate to “C:\Windows\ServiceProfiles\LocalService\AppData\Local”
requires admin privileges
4. Delete the FontCache dat files. (They will
be regenerated over time.)
5. Restart the Windows Font Cache Service.
Thank you! -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva
Maybe you are looking for
-
Photo Syncing - Ideas for the next release of iTunes
I have noticed over the last few months that when I sync my iPhone with iTunes, it mentions that it is syncing my photos as well. The only thing that I have are the photos on the phone, nothing else marked in iTunes to transfer. So my question is thi
-
File Sharing with user on MacBook Pro, restrict access to certain folders
I work on my iMac mostly and have 3 external drives hooked into the iMac. I have file sharing turned on because I want to be able to access these external drives on my macbook pro. I can get into all my drives as planned. However, I have a user on th
-
Ok so I'm making a survey for a website and I have a series of questions where the user can rate it from a list of choices and I have these questions in a table in access and the rating options in a table. I want to have the questions display with th
-
I am trying to backup my apps and I've already authorized my computer, but it's giving me the error that I need to authorize my computer even though I already have.
-
ArrayList nullpointer exception
I'm creating a game called bubblebreaker in Java, with the principle off model, view and controller classes. In my model class I create a list of bubble objects. In the view I make these bubbles visible and in the controller class I react on external