ICM_HTTP_CONNECTION_FAILED  Error

Hi,
I am trying CRM Mobile Sales With SUP.
the device is registered but data not flowing to device. when checked in subscription monitering i am getting below error .
Exception occurred due to http communication failure SDOE_ESDMA
14.09.2011 08:38:15 400 - ICM_HTTP_CONNECTION_FAILED -
Queue also blocked in SMQ2 with same error.
I checked the below thread
Exception occurred due to http communication failure
and tried the following.
1)telnet from DOE to SUP successful u2013 on port 8000
2)telnet from SUP to DOE successful u2013 port 8000
3)firewall is disabled in SUP .
4) Also checkd the enteries for hostname and IP adress in table SDOE_WSE_HOST . Enteries are present in the table.
Kindly let me know the solution.
Regards,
Kanagaraj.

No. we are not using proxy.
Regards,
Kanagaraj

Similar Messages

  • "ICM_HTTP_CONNECTION_FAILED" Error  SUP

    Hi,
    I am trying to establish a connection from SAP to SUP server with transection sm59. But im getting "ICM_HTTP_CONNECTION_FAILED" error with "sr000" message no. I ping the host and port successfully.
    Connection profile:
    Target Host :  <Host>
    Path Prefix :  /dcn/HttpAuthDCNServlet
    Service No.   8000 (i suppose its DCN http port)
    user : supAdmin
    pass: s3pAdmin
    what might be the problem?
    Thanks for your help in advance.

    Chagne the username to
    supAdmin@Admin
    This should allow you to complete the test successfully

  • ICM_HTTP_CONNECTION_FAILED error while testing HTTP RFC in ECC 6 IDES

    Hi Experts,
    I have ECC 6.0 IDES system - new installation. I have created client 100 which is a copy of client 000. Being an IDES system, client 800 is automatically created.
    While trying to connect this system to PI 7.1, I have created one HTTP RFC (H) in client 100 giving the details of PI system which is working perfectly fine. I have maintained the SLD details as well. But on testing the same RFC on client 800, its giving me the error as ICM_HTTP_CONNECTION_FAILED. I have created the user in PI which is maintained as well.
    Even If I create a new HTTP RFC connection in client 800, its giving the same error again. User in 100 & 800 is same and both having maximum authorizations. Any opinions on why I am getting the above said error in Client 800?
    Thanks & Regards,
    Naresh.

    Hi,
    SMICM Trace file gives the following log when I am testing the HTTP Connection SAP_PID from SM59 of XYZ Client 100:
    [Thr 896] IcmConnConnect: direct connect to <fully qualified hostname of PI system:50000>
    [Thr 896] NiHsLGetNodeAddr: found hostname '<fully qualified hostname of PI system>' in cache
    [Thr 896] NiIGetNodeAddr: hostname '<fully qualified hostname of PI system>' = addr xx.yy.zzz.lmn
    [Thr 896] NiIGetServNo: servicename '50000' = port C3.50/50000
    And when I am testing the same connection from SM59 of XYZ Client 800, getting the following log:
    [Thr 4928] NiHsLGetNodeAddr: hostname 'proxy' not found by operating system
    [Thr 4928] *** WARNING => Connection request from (55/18633/1) to host: proxy, service: 8080 failed (NIEHOST_UNKNOWN)
    RM-T55, U18633, 800 ADMINISTRATOR, 19:18:49, M1, W2, SM59, 3/2 [icxxconn.c 2341]
    I tried to take the restart of the system but still giving the same error.
    Any suggestion???
    Br,
    Naresh.

  • ICM_HTTP_CONNECTION_FAILED error in file to proxy??

    Hi
    In my file to proxy,
    i am maintaining one Http RFC destination..intest Connection i am getting 500 as status.
    two TCP/IP destinations LCRSAPRFC and SAPSLDAPI.
    i am maintaing values in SPROXSET table.
    in SLDAPICUST also.
    and in SXMB_ADM i configuerd Integration engine.
    but i am getting error in sxmb_moni
    SAP:P4></![CDATA[>
      <SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://dcexi0605.aaaa.com:8030/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/graybar_tile.jpg" height="31">  </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br><hr><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Feb 28 12:28:10 2007 </td></tr> <tr><td>Module:</td><td>icxxconn_mt.c</td></tr> <tr><td>Line:</td><td>2121</td></tr> <tr><td>Server:</td><td>ciBGX30_BGX_30</td></tr> <tr><td>Detail:</td><td>Connection request from (42/31087/0) to host: dcesssss08.aaaa.biz, service: 8010 failed (NIECONN_REFUSED) AP-T42, U31087, 100 SOA_AAA, M2B-36-D-1787, 12:28:10, M0, W2, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
      <SAP:Stack><b>Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</b></SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    please guide me where i did mistake
    regards
    Ram

    hi friends..
    now i am getting HTTP_RESP_STATUS_CODE_NOT_OK HTTP response contains status code 403 with the description Forbidden Error when sending by HTTP (error code: 403, error text: Forbidden)
    i maintaind in RZ10 the values.intially port is 8100 , now i changed it 8000
    in sxmb_adm..
    corresponding Integarion server:
    http://hostname:8030/sap/xi/engine?type=entry
    the same value is maintained in Sproxset table also
    in SMICM -Services Http services port is 8000
    please suggest me
    regards
    Ram

  • WSPUBLISH : ICM_HTTP_CONNECTION_FAILED error when publishing webservice

    Dear Friends,
    We are trying to publish a webservice via tcode WSPUBLISH.
    The first step regarding the service registry and service port is successful.
    The following error occurs in step 2 :
    Error retrieving Services Registry (SR) version information.     
    DETAIL:
        SOAP:1,023 SRT: Processing error in Internet Communication Framework:
        ("ICF  Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
    The logical port has been created and the 'test connection" via SM59 is also successful.
    Prior to WSPBLISH, the SOAMANAGER and WSPARAM steps have been followed as per SAP help documentation.
    Please suggest how to resolve this issue.
    Regards,
    TS

    Hi Juan,
    The dev_icm trace is attached below. The authorization checks are failing when attempting to signon to ICM via the SAP MMC. I have tried quite a few options for the user. What is the right user id to use?
    trc file: "dev_icm", trc level: 1, release: "700"
    sysno      00
    sid        J2E
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    235
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        3668
    [Thr 3664] Thu Mar 11 15:01:18 2010
    [Thr 3664] TRACE FILE TRUNCATED
    [Thr 3664] started security log to file dev_icm_sec
    [Thr 3664] ICM running on: SAPx64.ritam.com
    [Thr 3664] MtxInit: 30001 0 2
    [Thr 3664] IcmInit: listening to admin port: 64998
    [Thr 3664] Thu Mar 11 15:01:19 2010
    [Thr 3664] DpSysAdmExtCreate: ABAP is active
    [Thr 3664] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    [Thr 3664] DpShMCreate: sizeof(wp_adm)          29792     (1752)
    [Thr 3664] DpShMCreate: sizeof(tm_adm)          5912704     (29416)
    [Thr 3664] DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
    [Thr 3664] DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    [Thr 3664] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    [Thr 3664] DpShMCreate: sizeof(comm_adm)          552080     (1088)
    [Thr 3664] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    [Thr 3664] DpShMCreate: sizeof(slock_adm)          0     (104)
    [Thr 3664] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    [Thr 3664] DpShMCreate: sizeof(file_adm)          0     (72)
    [Thr 3664] DpShMCreate: sizeof(vmc_adm)          0     (1864)
    [Thr 3664] DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    [Thr 3664] DpShMCreate: sizeof(gw_adm)     48
    [Thr 3664] DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000001D40050, size: 6614144)
    [Thr 3664] DpShMCreate: allocated sys_adm at 0000000001D40050
    [Thr 3664] DpShMCreate: allocated wp_adm at 0000000001D42270
    [Thr 3664] DpShMCreate: allocated tm_adm_list at 0000000001D496D0
    [Thr 3664] DpShMCreate: allocated tm_adm at 0000000001D49730
    [Thr 3664] DpShMCreate: allocated wp_ca_adm at 00000000022ECFB0
    [Thr 3664] DpShMCreate: allocated appc_ca_adm at 00000000022F2DB0
    [Thr 3664] DpShMCreate: allocated comm_adm at 00000000022F4CF0
    [Thr 3664] DpShMCreate: system runs without slock table
    [Thr 3664] DpShMCreate: system runs without file table
    [Thr 3664] DpShMCreate: allocated vmc_adm_list at 000000000237B980
    [Thr 3664] DpShMCreate: allocated gw_adm at 000000000237BA00
    [Thr 3664] DpShMCreate: system runs without vmc_adm
    [Thr 3664] DpShMCreate: allocated ca_info at 000000000237BA30
    [Thr 3140] IcmProxyWatchDog: proxy watchdog started
    [Thr 3664] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 0
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 1
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 2
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 3
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 4
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 5
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 6
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 7
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 8
    [Thr 3664] IcmCreateWorkerThreads: created worker thread 9
    [Thr 3192] IcmWatchDogThread: watchdog started
    [Thr 3200] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set => do not trust any intermediary
    X.509 cert data will be removed from header [http_plg.c   743]
    [Thr 3200] Thu Mar 11 15:01:20 2010
    [Thr 3200] ISC: created 400 MB disk cache.
    [Thr 3200] ISC: created 50 MB memory cache.
    [Thr 3200] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
    [Thr 3200] HttpExtractArchive: files from archive D:\usr\sap\J2E\DVEBMGS00\exe/icmadmin.SAR in directory D:/usr/sap/J2E/DVEBMGS00/data/icmanroot are up to date
    [Thr 3200] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0
    [Thr 3200] CsiInit(): Initializing the Content Scan Interface
    [Thr 3200]            PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
    [Thr 3200] CsiInit(): CSA_LIB = "D:\usr\sap\J2E\DVEBMGS00\exe\sapcsa.dll"
    [Thr 3200] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0
    [Thr 3200] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=4101) for /:0
    [Thr 3200] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=4, flags=1077253) for /:0
    [Thr 3200] Started service 8000 for protocol HTTP on host "SAPx64.ritam.com"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
    [Thr 3200] Thu Mar 11 15:01:25 2010
    [Thr 3200] IcmNetCheck: network check passed without detecting problems
    [Thr 3128] Thu Mar 11 15:02:20 2010
    [Thr 3128] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c  430]
    [Thr 3156] Thu Mar 11 15:02:29 2010
    [Thr 3156] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c    2245]
    [Thr 3664] Thu Mar 11 15:02:33 2010
    [Thr 3664] HttpSAPR3SetParam: switch j2ee http port from  to: 50000
    [Thr 3664] HttpSAPR3SetParam: switch j2ee https port from  to: 50001
    [Thr 3664] Thu Mar 11 15:05:06 2010
    [Thr 3664] HttpSAPR3SetParam: Switched j2ee status to: 1
    [Thr 3152] Thu Mar 11 15:15:05 2010
    [Thr 3152] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
    [Thr 3152] *** ERROR => HttpAdmHandleReq: authorization failed for user: j2ee_admin [http_adm.cpp 1035]
    [Thr 3132] Thu Mar 11 15:15:17 2010
    [Thr 3132] *** ERROR => HttpAdmHandleReq: authorization failed for user: sapuser [http_adm.cpp 1035]
    [Thr 3180] Thu Mar 11 15:15:29 2010
    [Thr 3180] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_admin [http_adm.cpp 1035]
    [Thr 3160] Thu Mar 11 15:15:50 2010
    [Thr 3160] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
    [Thr 3160] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_admin [http_adm.cpp 1035]
    [Thr 3180] Thu Mar 11 15:17:16 2010
    [Thr 3180] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
    [Thr 3180] *** ERROR => HttpAdmHandleReq: authorization failed for user: icmadmin [http_adm.cpp 1035]
    [Thr 3156] Thu Mar 11 15:17:30 2010
    [Thr 3156] *** ERROR => HttpAdmHandleReq: authorization failed for user: icmadmin [http_adm.cpp 1035]
    [Thr 3128] Thu Mar 11 15:18:06 2010
    [Thr 3128] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
    [Thr 3128] *** ERROR => HttpAdmHandleReq: authorization failed for user: webadm [http_adm.cpp 1035]
    [Thr 3160] Thu Mar 11 15:18:13 2010
    [Thr 3160] *** ERROR => HttpAdmHandleReq: authorization failed for user: webadm [http_adm.cpp 1035]
    [Thr 3152] Thu Mar 11 15:18:25 2010
    [Thr 3152] *** ERROR => HttpAdmHandleReq: authorization failed for user: http_admin [http_adm.cpp 1035]
    [Thr 3128] Thu Mar 11 15:20:04 2010
    [Thr 3128] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
    [Thr 3128] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm admin [http_adm.cpp 1035]
    [Thr 3124] Thu Mar 11 15:20:15 2010
    [Thr 3124] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_adm [http_adm.cpp 1035]
    [Thr 3152] Thu Mar 11 15:20:17 2010
    [Thr 3152] *** ERROR => HttpAdmHandleReq: authorization failed for user: icm_adm [http_adm.cpp 1035]
    [Thr 3132] Thu Mar 11 15:20:29 2010
    [Thr 3132] *** ERROR => HttpAdmHandleReq: authorization failed for user: icmadm [http_adm.cpp 1035]
    [Thr 3180] Thu Mar 11 15:20:39 2010
    [Thr 3180] *** ERROR => IcmReadAuthData: could not open authfile: D:\usr\sap\J2E\SYS\global\security\data\icmauth.txt - errno: 2 [icxxsec.c    611]
    [Thr 3180] *** ERROR => HttpAdmHandleReq: authorization failed for user: admin [http_adm.cpp 1035]
    Regards,
    TS

  • ICM_HTTP_CONNECTION_FAILED  Error 400

    Hello All,
    i have one synchronous interface on production system.
    it was running fine till now.
    But on Sunday we got around 1000 messages in SMQ2.
    they all are in same queue.
    But now same interface is running successfully....... (through another queue)
    Now how can resend these 1000 messages?
    1st message is in Automatic restart mode & has error:
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3 />
    Remaining messages are in scheduled Mode.
    Its urgent...Plz help.
    Thanks,
    Maheshwari.

    Hi Maheshwari,
    Statuses such as HOLDING or FAILED usually happen only for delivery semantics EOIO (exactly once in order) or BE (best effort means Asynchronous). TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue. This is done via the Messaging System receive servlet:
    http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>/<PROTOCOL>
    The MS returns HTTP 200 to the Integration Server only if this was executed successfully. In this example scenario, status TO_BE_DELIVERED should not appear since we assume that the IS has called the servlet successfully.
    The status is updated from TO_BE_DELIVERED to DELIVERING when the message has popped out of the receive queue and the event handler lookup was successful, so there is a small gap where TO_BE_DELIVERED could remain in the message monitor, although it was delivered from IS successfully.
    if you face Blocked Queues (SYSFAIL), Incoming Messages are blocked then follow the steps
    1.) Go to SMQ2 (qRFC monitor) and execute
    2.) If there is a queue not moving, double click on queues ‘til you see the status. SYSFAIL due to error – move to the right to see the error text
    If error is due to cache not refreshed:
    1.) Go to transaction SXI_CACHE and check if CACHE is not up to date In this case, CACHE contents are up-to-date.
    2.) If CACHE is not up to date, click Refresh before refreshing the cache just in case someone else already did it. If still not up to date, click “Start Delta Cache Refresh” in “XI Runtime Cache”.
    If CACHE is already up to date as seen above, proceed to next steps.
    3.) Then, go back to SMQ2. Unlock the queue that is in SYSFAIL. To do this:
    a.) Choose the queue that is in SYSFAIL.
    b.) Click unlock icon
    4.) Then, double click in the queue name ‘til you go to the user.
    5.) Double click on the user to go to the message in error
    6.) Select the one in error
    7.) Click restart and refresh to see if the message will be processed successful.
    If error text is due to JCo failure (Java connector)
    When J2EE is already up, do the following:
    1.) Just go inside the queue in error ‘til you go to the user.
    2.) Double click on the user to go to the message in error.
    3.) Click/Choose the message in error (just going to the right for the error message, it is JCo failure related)
    4.) Restart the message (retaining the trace level)
    6.) Check for the status of the XML if it is now processed.
    7.) Then, click F3 or back ‘til you go back to the queue in SYSFAIL.
    8.) Then, reset status of the LUW of the queue in SYSFAIL.
    After that, it could be seen that queues are now in RUNNING status.
    Go to SM59 and create a RFC destination with the connection type G and service no as 80 and website name in the target host field and approipriate path prefix in path prefix field.
    Ex:https://www.sdn.sap.com/sdn/collaboration.sdn should be in target host and /sdn/collaboration.sdn in path prefix.
    check in R/3:
    SCIF: Is the service sap/xi/engine activated?
    SU01: Is user XIAFUSER not blocked and has suitable rights?
    Also refer these threads ;
    INTEGRATION_DIRECTORY_HMI: Connection fails
    ICM_HTTP_CONNECTION_FAILED
    SAF - ICM_HTTP_CONNECTION_FAILED
    HTTP adapter setup
    Answer by Wolfgang Janzen
    SSL certificates not visible while RFC destination creation
    ICM_HTTP_SSL_ERROR
    Please can you check if this is of any help.
    ICM_HTTP_SSL_ERROR
    HTTP-ADAPTER with HTTPS =  ICM_HTTP_SSL_ERROR
    SSL: Client Certificate
    SSL: Client Certificate
    Check out this SAP Note- 824554 and OSS Note 554174 SAP Note- 852688
    Thread
    To Be Delivered
    XI : How to Re-Process failed XI Messages Automatically
    Regards,
    Vinod.

  • ICM_HTTP_CONNECTION_FAILED  Error while executing WebService

    Hi,
    Can anybody tell me why i am getting the error while i am trying to execute the webservice which i have created via se80.
      <?xml version="1.0" encoding="utf-8" ?>
    - <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
    - <asx:values>
      <SYSTEMFAULT href="#o103" />
      </asx:values>
    - <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
    - <cls:CX_AI_SYSTEM_FAULT id="o103">
    - <CX_ROOT>
      <TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
      <PREVIOUS />
      <KERNEL_ERRID />
    - <INTERNAL_SOURCE_POS>
      <PROGID>306</PROGID>
      <CONTID>993</CONTID>
      </INTERNAL_SOURCE_POS>
      </CX_ROOT>
      <CX_STATIC_CHECK />
    - <CX_AI_SYSTEM_FAULT>
      <CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
      <CODE>SOAP:1.023</CODE>
    <b>  <ERRORTEXT>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</ERRORTEXT></b>
      <LANGUAGE />
      </CX_AI_SYSTEM_FAULT>
      </cls:CX_AI_SYSTEM_FAULT>
      </asx:heap>
      </asx:abap>

    Arpit,
    I am pretty sure that you have a network issue. Your ICM/ICF is up an running. Receives a request from your client program (the one using your proxy class), tries to connect to the URL you specified and fails to receive an answer.
    It's like calling a URL in your browser and not receiving an answer. So, if it's not the proxy, you maybe have a firewall issue, a nameserver issue or something in this area.
    If you had a different problem, say you misspelled the service name or something you would get another error like CONNECTIONREFUSED or something.
    I'd investigate network issues.
    regards,
    anton

  • ICM_HTTP_CONNECTION_FAILED error on http receive method

    Hi,
    I am trying to read a XML via http. I have developed a code referencing this blog:
    /people/rashid.javed/blog/2007/03/11/cricket-world-cup-http-client-and-simple-transformations
    When http receive method is executed it gives me an error.
    On executiong of: CALL METHOD client->receive it gives error:
    code:    400  message:  ICM_HTTP_CONNECTION_FAILED
    I treid changing host and buf in code below both to http://www.google.com to rule out the possibility of bad url. Also tried setting time out to 500 in send method. Still no luck.
    ICM trace shows following:
    Thr 4864] *** WARNING => Connection request from (16/6462/1) to host: http://www.google.com/, service: 80 failed (NIEHOST_UNKNO
    How do I solve this error, please give me some tips.
    I was looking forum for this issue but was not able to find a solution.
    Here is complete code:
    DATA: client TYPE REF TO if_http_client.
    DATA: host TYPE string.
    * DATA: proxyh TYPE string VALUE 'IfYouHave.Proxy.com',
    *      proxyp TYPE string VALUE '8080'.
    DATA: buff TYPE string,
          respd TYPE string.
    DATA: subrc TYPE sysubrc.
    CALL METHOD cl_http_client=>create
      EXPORTING
        host               = 'http://www.google.com/ig/api'
    *    SERVICE            =
    *    proxy_host         = proxyh
    *    proxy_service      = proxyp
    *    SCHEME             = SCHEMETYPE_HTTP
    *    SSL_ID             =
    *    SAP_USERNAME       =
    *    SAP_CLIENT         =
      IMPORTING
        client             = client
      EXCEPTIONS
        argument_not_found = 1
        plugin_not_active  = 2
        internal_error     = 3
        OTHERS             = 4
    IF sy-subrc <> 0.
      WRITE:/ ' cl_http_client=>create, subrc = ', sy-subrc.
      EXIT.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ELSE.
      buff = 'GET'.
      CALL METHOD client->request->set_header_field
        EXPORTING
          name  = '~request_method'
          value = buff.
      buff = 'http://www.google.com/ig/api?weather=21218&hl=en'.
      cl_http_utility=>set_request_uri( request = client->request
                                        uri     = buff ).
      subrc = cl_http_utility=>get_last_error( ).
      IF subrc <> 0.
        WRITE: / 'Wrong URI format'.
        EXIT.
      ENDIF.
    ENDIF.
    CALL METHOD client->send
    *  EXPORTING
    *    TIMEOUT                    = CO_TIMEOUT_DEFAULT
      EXCEPTIONS
        http_communication_failure = 1
        http_invalid_state         = 2
        http_processing_failed     = 3
        http_invalid_timeout       = 4
        OTHERS                     = 5
    IF sy-subrc <> 0.
      CALL METHOD client->get_last_error
        IMPORTING
          code    = subrc
          MESSAGE = buff.
      WRITE: / 'communication_error( send )',
             / 'code: ', subrc, 'message: ', buff.
      EXIT.
    ENDIF.
    CALL METHOD client->receive
      EXCEPTIONS
        http_communication_failure = 1
        http_invalid_state         = 2
        http_processing_failed     = 3
        OTHERS                     = 4.
    IF sy-subrc <> 0.
      CALL METHOD client->get_last_error
        IMPORTING
          code    = subrc
          MESSAGE = buff.
      FORMAT COLOR COL_BACKGROUND.
      WRITE: / 'communication_error( receive )',
             / 'code: ', subrc, 'message: ', buff.
      WRITE: / 'communication_error'.
      EXIT.
    ENDIF.
    respd = client->response->get_cdata(  ).
    WRITE:/ respd.
    Thanks in advance,
    CD
    Edited by: CD on Feb 19, 2009 1:46 PM

    Check this link..
    [HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED;

  • "ICM_HTTP_CONNECTION_FAILED" error for cross catalog search

    We are running SRM 7.0 SP 08.
    I have set up the external web services to access multiple external product catalogs to create shopping carts. These individual catalogs work fine for SC creation. (BTW, we removed the parameter for HOOK_URL as it seems to be not required starting SRM7).
    However, when we are trying to run "cross catalog search", either from SC creation wizard or from normal SC creation screen, the popup window would appear with search in progress, but always return no result with detail message: "ICM_HTTP_CONNECTION_FAILED" for all catalogs.
    I have debugged the scenario, and the error seems to be from FM /SAPSRM/PDO_CCS_BCKGRSEARCH, which is called in a background task. The statement that got the error is the following, with return code 1.
        CALL METHOD lv_res_client->receive
          EXCEPTIONS
            http_communication_failure = 1
            http_invalid_state         = 2
            http_processing_failed     = 3
            OTHERS                     = 4.
    Could you shed some light as to what might have been the problem?
    Thanks for your help.

    We are running SRM 7.0 SP 08.
    I have set up the external web services to access multiple external product catalogs to create shopping carts. These individual catalogs work fine for SC creation. (BTW, we removed the parameter for HOOK_URL as it seems to be not required starting SRM7).
    However, when we are trying to run "cross catalog search", either from SC creation wizard or from normal SC creation screen, the popup window would appear with search in progress, but always return no result with detail message: "ICM_HTTP_CONNECTION_FAILED" for all catalogs.
    I have debugged the scenario, and the error seems to be from FM /SAPSRM/PDO_CCS_BCKGRSEARCH, which is called in a background task. The statement that got the error is the following, with return code 1.
        CALL METHOD lv_res_client->receive
          EXCEPTIONS
            http_communication_failure = 1
            http_invalid_state         = 2
            http_processing_failed     = 3
            OTHERS                     = 4.
    Could you shed some light as to what might have been the problem?
    Thanks for your help.

  • ICM_HTTP_CONNECTION_FAILED error in SM59

    Hi,
    I configured ADS and it was working fine with http service.
    Now i configured SSL in Java and ABAP instances.
    I need to setup SSL communication between these 2 instances.
    I did configuration for that but in SM59 when i do connection test for ADS_HTTPS RFC it is giving me an error ICM_HTTP_CONNECTION_FAILED.
    Please can anybody guide me with a solution.
    With Regards,
    Pradeep.B

    Hi
    Take the help from these diffferent similar threads
    1.ICM_HTTP_CONNECTION_FAILED
    2.ICM_HTTP_CONNECTION_FAILED and Web Services
    3.Elster XI HTTP error
    Best Regards
    Satish kumar

  • File-Proxy (Error while receiving by HTTP )

    Hi All,
    I have a problem in the scenario file to Proxy....which is that after placing a source file successfuly in the source directory.... it is showing an information message in the XML message monitoring(sxmb_moni) like below
    Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)
    Could anybody  explain the problem please????where i need to configure to reslove this.
    Thanks.
    Respond me Imme pls.

    First thing to check is that the adapter_plain service is activated in the transaction SICF. (path: default_host-> sap -> xi -> adapter_plain
    Then check that the http service is running properly (transaction SMICM).
    Also, unless you are connecting to an SAP webAS, you should give a username and password, rather than "Use Logon data fotr SAP System". You could also maintain the URL and authentication data as an sm59 destination and use that in the adapter.
    Please look at these...
    INTEGRATION_DIRECTORY_HMI: Connection fails
    ICM_HTTP_CONNECTION_FAILED
    SAF - ICM_HTTP_CONNECTION_FAILED
    HTTP adapter setup
    Check out this SAP Note- 824554
    Also this links
    ICM_HTTP_CONNECTION_FAILED
    Cache Refresh~
    https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    ICM_HTTP_CONNECTION_FAILED ERROR
    error code: 400, error text: ICM_HTTP_CONNECTION_FAILED
    Error With ABAP Client proxy
    Message not reaching Integration server
    HTTP content sever - error?
    Error in content server configuration
    HTTP Client : Code 110 reason
    RFC: INTEGRATION_DIRECTORY_HMI
    Content server config - error?
    Thanks
    Swarup

  • ICM error

    Hi,
    I have several WebServer - SCM scenarios in my landscape.
    Of which, few of them are HTTP-SOAP and few are HTTP-XI (proxy)
    The HTTP-SOAP scenario works fine but the scenarios HTTP-XI gives Error while receiving by HTTP(error code : 400) error text:  ICM_HTTP_CONNECTION_FAILED 400 not found error message. My Basis guy has been looking into it since last 5 days and he couldnt find anything wrong with the system. We have tested all the possible entries in Visual admin, RFC destiatnions of type HTTP. All seems to be good now.
    To rule out the data issues, I have configured the same message to a file reciever besides SCM system; using the same recvr determination. That is generating file succesfully but the call to Proxy is failing.
    On the other hand from the messages going from SCM system to web server, I have a SCM-HTTP scenario which is Proxy - http, which is also giving the same error message.
    What could be the possible issue?

    Hi
    In  SAP Netweaver Process Integration Troubleshooting Guide, There is one solution given for ICM_HTTP_CONNECTION_FAILED Error.
    According to Guide.
    Run SPROX_CHECK_IFR_RESPONSE report that executes a http call to itself to test if the http communication is working.
    In case of problems check following:
    1. Is the ICM running and the HTTP port Active in Transtion SMICM?
         See SAP Note 634006
    2.Check the dev_icm trace file and see whether there are any errors.
    3.check SAP Note 773830 and make sure the host name is set correctly.
    Regards
    Laxmi Bhushan

  • Elster XI HTTP error

    Dear experts,
    I've set up the XI configuration for the Elster scenario but when executing the HR - test report (RPUTX7D0) I'm getting a "HTTP client. Code 400 reason ICM_HTTP_CONNECTION_FAILED" for all 4 XI HTTP posts. 
    All other interfaces, such as the Elster GZIP, the Elster UNZIP and the Elster Export work fine.
    Does anyone have an idea, or did anyone encounter the same issue?
    Thx
    Michael

    Hi  for ICM_HTTP_CONNECTION_FAILED
    Hi Check with thread your querry is solved here
    ICM_HTTP_CONNECTION_FAILED
    Re: XI Basics - Tough question
    ICM_HTTP_CONNECTION_FAILED
    ICM_HTTP_CONNECTION_FAILED
    Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNEC
    refer the point no 2 at this
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards
    Abhishek

  • Errors with HTTPS Connection to external server

    I am trying to establish a HTTPS connection to an external web site in transaction SM59,  but I get “ICM_HTTP_CONNECTION_FAILED” errors.  I get the same errors from a bespoke ABAP program.
    I know the request is getting to the web site, but the response is not getting back into SAP. 
    This is not firewall related.
    I have installed and configured the SAPCRYPTOLIB software for SSL support and entered the necessary instance profile parameters.
    I have configured STRUST.
    SM59 is setup for type G (HTTP Connection to Ext. Server) and port no. 8443
    I have started the HTTPS service in SMICM
    I have noticed an odd entry in the SCICM trace file,  but don’t know how to fix.
    <i>ERROR => Connection request from (-1/65535/0) to host: mms-sap.sapmms.com, service: 8000 failed (NIECONN_PENDING)</i>
    Does anyone have any suggestions?

    Thanks for your comments.
    I've tried everything in SM59. 
    SAP refers to both protocols as HTTP. 
    I think the error is with the response coming back into SAP.  SAP doesn't know what to do.  It might be DNS related or I might need to configure the ICM somewhere.  Oddly the response comes back into sap on port 8000 (which is HTTP).  It went out on port 8443 (which is HTTPS).

  • Writing to BI on demand using http request in ABAP code

    Hi Gurus
    I am getting ICM_HTTP_CONNECTION_FAILED error when I execute a program which contains HTTPS request. The purpose of the program is to write in bi.demand.com. The HTTP error code is 400.
    Also in SMICM I get the following error:
    ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;XX.XXXXX.com:443) [nibuf.cpp    4611]
    WARNING => Connection request from (25/133/3) to host: XX:XXXXXX.com, service: 443 failed (NIECONN_REFUSED)
    210 ACCLIMATION, acclimation-PC, 12:38:29, M3, W0, SE38, 6/2 [icxxconn_mt.c 2321]
    What should I do to correct this?
    Thanks in advance.
    Regards
    Sunny

    Hi Sunny,
    None of this looks familiar to me.  What is the url that you are trying to request?
    Are there potentially any proxy servers between your machines and the internet that need to be configured into your application?
    Cheers
    Steve

Maybe you are looking for

  • IS-RETAIL: How to update custom enhancement field using BAPI?

    Hi gurus, Like ECC BAPI: BAPI_MATERIAL_SAVEDATA, This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data. But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to u

  • Power Mac G5 Dies in its Sleep

    I have a 2.3 GHz dual-processor Power Mac G5 purchased in December (**** Apple for introducing the Mac Pro so soon!). I use Software Update to keep the system and its software current. Since the Mac OS X 10.4.7 update, my system will, periodically, d

  • Saving in CS2

    Hi, Is it possible to save a file in Adobe InDesign CS2 format using InDesign CS3 version. Thanks

  • Query abt BufferedReader???..

    i have a program which send data from one pc to another using outputstream and the data is received at another pc using BufferedReader...OutputStream accepts only bytes and BufferedReader reads in the form of string?..so is there any trunaction of da

  • About unicode and non-unicode

    Hi experts, can anybody tell me what is unicode and non-unicode in interview point of view.Just 2 or 3 sentences.... Thanks in advance