ICM HTTPS Port Hung

Hi Experts,
We have activated SSL in our landscape and configured the PSE files. The HTTPS service is fine and is at active state from SMICM.
I 'm able to access J2ee using Direct HTTPS port. But when I try to access using HTTPS port of ICM it prompts me the correct certificate details but from there it simply hungs. The Progress bar in the internet explorer stays still .
I tried to increare the ICM trace level but still not able to find the exact solution.
When checking the active connections right from entering the URL . It moves from Accept connection --> Read Request --> Write Response and then hungs at the Write Response stage.
Even after closing the sessions I find the active session entry till I restart ICM !! . Not sure what can be the reason.
Regards,
Karthick.

Dear Karthick,
if you want to see what the ICM does on a HTTPS connection, you will have to set the profile parameter 'icm/trace_secured_data=true', otherwise the ICM will not log anything for HTTPS connections. The ICM will have to be restarted to put this into effect.
Best Regards,
Tim

Similar Messages

ICMERR-EDISPATCHERR.html not working after i place icm/HTTP/error_templ_pat

Hello all,
I'm trying to change the default error page on the webdispatcher when the connection to the portal/j2ee is lost.
I succesfully created a page called ICMERR-EDISPATCHERR.html and put it into a webdispatcher subfolder and set the parameter icm/HTTP/error_templ_path to point to this folder so that instead of the "dispatching error" page .
I have both webdisp and portal on same host and using diff ports .and pacled the param icm/HTTP/error_templ_path and created a ICMERR-EDEFAULT.html in the same directory and its giving the The page cannot be displayed error. If i already logged in into portal by using webdisp, its giving cutom message. If i open a new browser and acccessing portal using webdisp port , its giving error " page can not be displayed"
Krishnarjun

Hi
Please follow below link first go to internet Explorer>ITools>internet options>connectionslan setting>Advanced>copy and paste that link . your error The page cannot be displayed error will resolved
Thanks
Manish Gupta

ABAP and Java HTTP Port same - PI 7.1 EHP1

Hi,
I have installed PI 7.1 EHP1 system.
I realize that both ABAP and Java HTTP Ports are same.
Is there any official note reg this or any info from SAP on the change.
icm/server_port_0 = PROT=HTTP,PORT=51500,TIMEOUT=60,PROCTIMEOUT=600
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Thanks,
Tanuj

Hi,
>>I realize that both ABAP and Java HTTP Ports are same.
the changed happened in 7.1 already as far as I remember
but I don't think it's documented anywhere except maybe the installation guide
Regards,
Michal Krawczyk

ECC6 integrated ITS default port 8000 changed to http port 80

We want the ECC6 integrated ITS default port 8000 changed to http port 80. The integrated ITS Cat2 transaction is currently working on http port 8000. I changed the icm/server_port_0(Instance Profile) and the ICM Monitor Active Services(smicm services) to use port 80. Cat2 transaction fails http fails after system restart. I have reverted back to 8000 and all is now working again. Is there more work that needs to be carried out or is port 80 is supported?

is your application server in domain?
if its in domain and when used sapides.<xxxx>.com if you get DNS not found, may be browser is looking up internet, put your domain in the exception in tools->internet options->connection->lan settings->proxy->advanced
"<i>This server does not support HTTPS! It is therefore potentially unsafe to send your password</i>" i just a warning message and you should still be able to log on.
(if you want to hide this info let me know)
<i>and i never could logon into R/3 !!</i>
do you also see a message that SSO2 is not configured? if yes follow the steps explained in OSS note no.517860
when you say never could logon what happens,
a) the field for user id pwd disabled? - click on the basic authentication button to get the log on pop up
b) error messages?
Regards
Raja

How to enable HTTPS Port in abap system

Hello All,
Hope all are doing great,can any one please tell me the procedure step by step how can i enable https port in my only abap system,is it required to enable ssl also for this?..
Regards,
Syed

Hi,
For enabling the HTTPS port you need to do alot many things
At first change the para meters in Rz10
icm/server_port_0 - PROT=HTTPS, PORT=1443, TIMEOUT=900
icm/HTTPS/verify_client - 1
ms/server_port_0 - PROT=HTTPS, PORT=1443
SE80 - Utilities > Settings > Internet Transaction Sevrer = HTTPS
and also check SMICM under Services HTTPS is not showing as Active
and still if you are facing any issue with the port check with the network team/firewall team whether any port is being blocked on the network/firewall.
Regards
Mohammed nizam

Unable to FInd HTTPS port in SMICM

Hi,
I'am trying to work on HTTPS .When i check on SMICM->Goto->Services i'am unable to find HTTPS service.
I did all this steps
1. From SAPGUI, run rz10
2. Add the parameter such as "PROT=HTTPS, PORT=443, TIMEOUT=9000" for icm/server_port_3.
You may use smcim->goto->parameters->display to check how many icm/server_port_<xx> already been defined and use next integer.
3. Save and activate the changes
4. Shutdown SAP system
5. go to c:\usr\sap\<sid>\SYS\profile, copy the changes from default.pfl to default.
6. Start SAP system.
but still i'am unable to find HTTPS service in SMICM.
Please guide me how to create this service.
With Regards,
Pradeep.B

ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/HRQ/SYS/exe/run/libsapcrypto.so") FAILED
.1: icman: fatal: /usr/sap/HRQ/SYS/exe/run/libsapcrypto.so: open failed: No such file or directory" [dlux_mt.c 445]
ERROR => secudessl_LoadLibrary(): Unable to load "/usr/sap/HRQ/SYS/exe/run/libsapcrypto.so" [ssslsecu_mt. 387]
ERROR => Loading of SSL library failed NO SSL available!
=================================================
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
ERROR => IcmIActivateService: SapSSLInit (rc=-1): SSSLERR_LIB_NOT_FOUND [icxxserv_mt. 737]
ERROR => IcmHandleMonServMsg: IcmActivateService failed for 8443, 2(rc=-14) [icxxmsg_mt.c 1872]
Fri Apr 30 04:55:45 2010
Am getting the above error when activating HTTPS service in SMICM, please help

No HTTP port defined in Exchange Profile for sld

Hi all,
During the BI and portal connectivity, we successfully executed the template installer, however, we have not yet imported the abap and related sp from SAP note.
After successful execution of template installer or CTC, we ran the supportdesk tool resolved errors and are left behind with two errors as below.
ERROR 1. RED BI Mastersystem
Message:
Error while connecting to BI mastersystem via RFC: Checks related to ABAP information cannot be executed because an outdated version of function module RSPOR_SETUP_CHECK is implemented. Please implement the recent version of note 937697.
Solution:
Check connection properties in Portal Systemlandscape for the property category 'Connector' (Systemlandscape/SAP_BW)
Issue: Now looking at connector properties that are set by CTC are complete and set. Connection Test for both Connector and SAP Web AS Connection are successful, only ITS is neither setup by template nor by us. Please suggest how to resolve this.
ERROR 2. RED Error in Check Class: com.sap.ip.bi.supportdesk.checks.impl.MultipleUserMappingCheck
(Error during retrieval of inverse user mapping for ABAP user 'null': No backend user ID provided for inverse user mapping. com.sapportals.portal.prt.runtime.PortalRuntimeException:...)
Looking at log file server<#>/log/defaultTrace.trc it points the following error:
No HTTP port defined in Exchange Profile for sld.BIW.bcs AND
Error reading from AII properties for sld.BIW.bcs
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.rb_exception.MESS_INVALLD_PARAMETER_VALUE
com.sap.aii.utilxi.misc.api.InvalidArgumentException: Parameter httpPort has the invalid value null
Issue: Checking we find that ICM is running with correct dns and port 8000 (http), only smtp is holding port 0. Where do we maintain http port for sld? Kindly suggest.
Finally the support desk tool is leaving the following checks with status UNDEFINED, would this impact the connectivity?
1.   UNDEFINED Deployed Components
2.   UNDEFINED Export check (PDF lib, ADS, ...)
3.   UNDEFINED Synchronized Clocks on WebAS Java and ABAP
4.   UNDEFINED URLs Prefixes Customized on Both J2EE and ABAP Side
5.   UNDEFINED WebAS ABAP Certificate and Login Modules Configuration
6.   UNDEFINED WebAS ABAP Settings
Looking at support desk tool and RSPOR_SETUP I notice the errors in RSPOR_SETUP appear green in support desktool such as User mapping (step 12) appears green in support desktool but red in RSPOR_SETUP.
Please suggest.
Best regards.

Hi,
If Support desk tool is showing some of the components undefined, than there may be posisbility that your ABAP BI and BI JAVA patch may not in sync.
ABAP BI and BI JAVA works only with specific patch set combinations. I will suggest that please refer to below note and correct the patch level, if required. Once the patch level is corrected, please run the support desk tool again, you will see new picture in support desk tool.
"SAP Note 1013369 - SAP NetWeaver 7.0 BI - intermediate Support Packages"
With Regards,
Saurabh

Cannot change http port

Hi guys,
I am trying to change the http port permanently to port 8000. Therefore I go to RZ10 -> select SID_DVEBMGS00_XXXXX -> Extended maintenance -> Display -> Edit -> Create -> and I add
Parameter name:
icm/server_port_0
Parameter val:
PROT=HTTP, PORT=8000
Then I press twice Copy and activate the profile. After that I restart the system.
Now when I go back to RZ10 -> select SID_DVEBMGS00_XXXXX I can not see the icm/server_port_0 entry in the parameter list. It should be here right?
Also when I go to transaction SMICM -> GOTO -> Services the HTTP Protocol is 0 and not 8000.
What am I doing wrong?
Thanks
Goluef

Hi Mate,
Before doing edit I would rather request you to import the active profiles first as changes done in older one will certainly not reflect.
Utilities >> Import Profiles >> Of active servers
Then choose the instance profile..Check if already there any entry of icm/server_port_0 and if not then create it or add a new one as icm/server_port_1 or similar
Then Copy the change>> Save>> Activate or Save and Activate.
Restart the system and the change should be there for sure..
If still doesn't work - Check the permissions in filesystem of this profiles and if the SIDadm is able to write the files. The data won't get written until you save it. Might want to check SM21 for errors.
Alternately for the time being just goto SMICM >> Goto >> Services >> Change the HTTP service here
Services >> Change
Put - Port - 8000, Log (HTTP), Keep alive, Process time and Save it.
Do note this is temporary and restarting system/ICM will make it go.
Do mind the port 8000 should not be used by any other process/prog.
Cheers,

Icm/HTTP/redirect_0 paramter in webdispatcher

Hello,
As anybody used this paramter and used the optional one i.e FROM, FOR, TO etc ..
icm/HTTP/redirect_<xx> = PREFIX=<URL prefix>[, FROM=<pattern for URL>, FROMPROT=<incoming protocol>, FOR=<pattern for host name:port>,TO=<new URL prefix>, PROT=<protocol>, HOST=<host>, PORT=<port number/name>]
reguest to share the same, ( u can mask the hostname ), intrested in understanding the syntax.
and also wanted to know what is the url user is using on the browser such that it re-directs to weddisphostname:portno/irj
regards
VM

Hello,
Let me re-phrase my question,
as an end user, i need to use an url i.e http://mycompany.abc.de.com
this should redirect to the http://<webdispatcher-hostname.domainname>:portnumber/irj/portal
which inturn open the portal page.
iam trying to use the parameter icm.http/redirect_0 to acheive this.
am i missing something.
if u have tried this, please share ur knowledge.
please confirm
regards

What parameter control the HTTP port at SMICM?

We need to adjust the HTTP port at SMICM.
Currently it is wrong.
We compare 2 systems by running RSPARAM but cannot tell
which parameter control the HTTP port.
Please help. Thanks a lot!

Hi Jennifer,
Please check the address, below;
http://help.sap.com/saphelp_nw70/helpdata/EN/61/f5183a3bef2669e10000000a114084/frameset.htm
"icm/server_port_<xx>" parameter indicates the HTTP port #.
Best regards,

OC4J http port in release 2

i am deploying an oc4j application on release 2. but am not sure what is the oc4j http port from where i can access the web-site of the application deployed. also, what all configurations need to be done to make this work. in release 1, the server.xml, default-web-site.xml and data-sources.xml had to be edited. is it the same here or any other xml files need to be changed?

By default OC4J 9.0.2/9.0.3 is configured to listen for http requests at port 8888. Please look at http-web-site.xml.
regards
Debu

Access to HTTPS port failed

Hi
Access to Https port failed after changing the Keystore to "Custom Identity and Trust". I have generated the identity and trust certificates and placed the path info with passphrase.
I have also set my SSL private key alias name to the key name generated during private key.
But still it doesn't work.
Any suggestions?
Thanks,
KR

Hi
Access to Https port failed after changing the Keystore to "Custom Identity and Trust". I have generated the identity and trust certificates and placed the path info with passphrase.
I have also set my SSL private key alias name to the key name generated during private key.
But still it doesn't work.
Any suggestions?
Thanks,
KR

GWIA not listening on HTTP port

I recently upgraded our GW8 to new hardware and eventually to 2012 sp1, now I'm seeing the following error in the GWIA log and the GWIA is not listening on its http port.
There is nothing listening on 9850 (default http port for gwia).
****** 04-10-13 10:03:39 ******
10:03:39 F476 ****************** Agent Restarted ******************
10:03:39 F476 MTP: Message Transfer Protocol initialization...
10:03:39 F476 MTP: Queue initialization...
10:03:39 F476 MTP: Queue initialization...
10:03:39 F476 Startup: No frgnames.cfg file found.
10:03:39 F3C7 Starting GWHTTP-Listener
10:03:39 F476 HTTP server running
10:03:40 F476 Error Listen Port is already in use. [856A]
10:03:41 F476 Shutdown of Threads
10:03:42 F476 Shutdown of Threads
After disabling GWIA POP / IMAP / LDAP (setting them to port 0) I'm getting the following(and still no http):
10:08:12 F476 ****************** Agent Restarted ******************
10:08:12 F476 MTP: Message Transfer Protocol initialization...
10:08:12 F476 MTP: Queue initialization...
10:08:12 F476 MTP: Queue initialization...
10:08:12 F476 Startup: No frgnames.cfg file found.
10:08:12 F3E7 Starting GWHTTP-Listener
10:08:12 F476 HTTP server running
10:08:13 F476 Error, Internal Udp Port is unusable. [8911]
10:08:14 F476 Shutdown of Threads
10:08:15 F476 Shutdown of Threads
GWIA is listening on the following ports, 1.2.3.4 being the server ip and I removed the POA connections.
# netstat -pan | grep -i gwia
tcp 0 0 1.2.3.4:7060 0.0.0.0:* LISTEN 12253/gwia
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 12253/gwia
udp 0 0 0.0.0.0:41547 0.0.0.0:* 12253/gwia
Any ideas ?
Besides this GW is running just fine.

Originally Posted by laurabuckley
Oh ok.
Check to see if the firewall is disabled on the server.
Also, set an HTTP username and password in ConsoleOne then do a full stop and start of GWIA.
Please post back your results.
Cheers,
Hi Laura,
The firewall is disabled (double checked), there is a http username and password (re-set it) set in C1, a full stop and start did not make a difference.
Originally Posted by laurabuckley
One more thing.... if your POA is running on the same box try disabling POP and IMAP on the POA - restart the POA and GWIA.
Cheers,
We're actively using the POA IMAP so that's not something I can disable.
Thanks,
Arjan

HTTPS port not activated on non-central Advanced Adapter Engine

Hello,
we have upgraded our non-central adapter engine from XI 3.0 to 7.1 EHP1.
Before, we were using port 58201 (5<InstanceID>01) for HTTPS and it was working fine. On the new system, the port 58201 isn't active, which I've checked with 'telnet <host> 58201'.
On XI 3.0, the port could be configured in the Visual Admin -> SSL Provider, but I don't find the corresponding setting in NWA.
I've already checked miscellaneous SAP notes (856597, 891877,...), HowTo-Guides and Blogs, but didn't find any hint...
Any idea, where I could edit the HTTPS port in NWA of the non-central adapter engine?
Thanks,
Juergen

Hello,
I didn't get access to ExchangeProfile over URL http://<host>:<port>/exchangeProfile and didn't find the settings in NWA.
Reason was the missing CryptoLibrary as discribed on http://help.sap.com/saphelp_nwpi711/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Regards,
Juergen

RFC Adapter error - http port configuration

Hi everyone,
on XI 3.0 I have some problems to invoke RFC functions located on a SAP SRM system.
No logs are displayed on the XI Monitor: the message is stopped at the "adapter" level.
It seems that RFC adapter tries to connect to a wrong URL (the Production system URL)and obviously it retrieves these messages:
"Received XI System Error. ErrorCode: NO_RECEIVER_CASE_BE ErrorText: ErrorStack: No receiver could be determined "
"Returning synchronous error notification to calling application: XIServer:NO_RECEIVER_CASE_BE:."
"Transmitting the message using connection http://YYY.sap.xxxx:8066/sap/xi/engine?type=entry failed, due to: XIServer:NO_RECEIVER_CASE_BE:."
In the SLD, the right port for Development system is 8064, the adapter is also configured on business landscape YYY and port 8064. I checked both J2EE visual administrator and Business Landscape customizing without success.
But at runtime the adapter framework point to another system on 8066 http port (and the interface call fails).
My question is: where is this wrong URL configured and from where exactly does it take these wrong informations?
Please, help me.
Alessandro Pozzozengaro.

Alessandro,
There is a very good document on SAP that explains, step-by-step what you are trying to do.
The name of the document is: 'Validating a Connection Between SAP R/3 and SAP XI with RFC'.
Give a look on that. I used it to build the scenario here and it works fine.
Regards,
Tadeu

ICM HTTPS Port Hung

Similar Messages

Maybe you are looking for