ICM Monitor Not Running

When we run a cold-back up proceedure by using scripts stopsap and startsap, our ICM goes down. We are not able to bring it back up running startsap again manaully, instead we have to reboot the server. We noticed in the ICM Monitor that we are getting a **warning message "Number of sockets supported on this host (1016) less than parameter icm/max_sockets (2048). Some how even after reboot, when the ICM is up again, I still see this warning in our log file. Any idea on the root problem of this ICM going down and if this warning message is a part of the problem?

Hi,
look at SAP Note 737625 - Parameter recommendations for the ICM
read it ,
regards,
kaushal
mark helpful answers

Similar Messages

Xserve G5 monitoring not running

I Have an Xserve Dual G5 with OS X Server 10.4.11 running.
The only thing that is not functioning is the System Monitor.
I know, that the LOM-possibilities of an G5 Xserve are limited,
but in the local System Monitor, when i enter the server as 127.0.0.1 or localhost,
it is also not reachable.
Any help?

Found the Solution ba myself, it was all in this article:
http://support.apple.com/kb/TS2066
Resolution
Mac OS X Server versions 10.1.5 to 10.3.9
Check to see that the watchdog.conf file found in the /etc directory contains the following line:
hwmond:respawn:/usr/sbin/hwmond # Hardware Monitor daemon
If the line above does not appear in the file, please add it to the file using the text editor of your choice.
Mac OS X Server versions 10.4 and later
SSH into the Xserve.
As root, execute this command:
/System/Library/ServerSetup/SetupExtras/hwmondSetup
Check the file /System/Library/LaunchDaemons/com.apple.hwmond.plist to ensure that it does not have (edit if necessary) these lines:
<key>Disabled</key>
<true/>
Wait a few seconds, and Server Monitor will show hardware information on the server.

SCOM 2012 Linux Monitoring - RPCBIND, RPCIDMAP, RPCSTAT services not running

We are running SCOM 2012 SP1 and added a test Linux server running Red Hat Enterprise 6.3. SCOM is reporting that the server is in Critical health because the following three services are not running.
1) Process Rpcbind Service Health - Rpcbind Mapper Not Running
2) Process Rpcidmap Service Health - NFSv4 ID Name Mapper Not Running
3) Process Rpcstat Service Health - NSM Status Monitor Not Running
My question is that are these services required to be running in order for SCOM to monitor the Linux servers properly? If yes, can you please give brief explaination as to why so I can explain that to our Linux Administrator. The Linux Administrator
is saying that we do not run these services on any of the Linux servers because they are not needed. If infact these services are not needed, how can I have SCOM ignore the critical error messages? Thanks

Yup, generally running. I'm assuming you've done a basic install of RHEL 6. All processes listed above are enabled by default on a RHEL 6 install if you take the default settings. If someone is just getting started you can pretty much guarantee
they will do a basic install of RHEL 6 and this will not be an issue.
Could it be done better... sure but at what point do you stop? We could discover all services running on the system and start monitoring them out of the box but what are important and what are not to each customer? The idea is to give you some basic monitoring
on a default install based on what each OS provider starts on a "default" install. If this does not suite your needs SCOM is very configurable and adding a custom service monitor is very easy to configure along with disabling existing ones.
If you'd like to provide feedback on this feel free to open a support ticket with Microsoft and file what we call a 'Design Change Request' [DCR]. We go though these prior to starting each update to SCOM. No guarantee it will get fixed/changed as we do have
priorities but we are listening.
Regards,
-Steve

ICM not running

Hi,
I have a problem with my WDA application / ICM.
I tried to open my WDA application today but it didn't work
I looked to transaction: SMICM to see if a port is correctly configured.
I got the message: ICM042 - Communication error with ICM - check status (smicm emergency mode)
Then on the next screen I see ICM status: Not running.
How can I start ICM?
Best Regards
Tomek

Hi Tomek,
Once delete the respectice active service and create the same service and activate it.
You can do so by going to tcode SMICM and next click on Services(Shift+F1) and there you can define the hostname and port number. and go to service and activate it...
Hope this would work...
Regards,
Narendra.

LT1423p not running at native resolution on Windows 8.1

Hi,
I have had the LT1423p touch mobile monitor for about 6 months and it was running fine with Windows 7 and my T440p notebook. Recently upgraded the notebook to Windows 8.1 and am having problems with the mobile monitor not running at 1600x900 resolution.
It runs at ALL resolutions except 1600x900 (e.g. it is fine up to any resolution up to 1440x900). However if I select the resolution to be 1600x900 (either via normal windows screen resolution dialogue or via Lenovo Display Link Manager) it runs at a resolution of 1280x1024 EVEN THOUGH Display Link Manager and default Windows screen resolution dialogue think it is currently running at 1600x900.
It is a very strange issue. Initially I tried with the default LT1423p drivers and have since upgraded both video drivers and displaylink drivers to latest version.
Seems like people here are running with Win 8.1 successfully so I am wondering why it is not working for me.
Any tips greatly appreciated.
Thanks.
Solved!
Go to Solution.

Been doing some more testing on this.
As it happens the screen resolution does look OK but Windows 8.1 is drawing screen objects with a weird resolution. If I take a window and slowly drag from my notebook screen over to the mobile screen the window resolution is perfect while I drag it across, and then as soon as more than half of the window being dragged is on the second screen, the resolution of the application window (like Windows Explorer or Firefox) just changes to a low resolution that matches a 1280x1024 screen.
The screen itself seems to have the correct resolution but OBJECTS within it have some sort of downscaling applied to them which just seems bizarre!
Going to http://www.whatismyscreenresolution.com/ via firefox in both screens reports different resolutions (1600x900 on notebook and 1280x1024 on mobile monitor). However if I drag an icon or set a 1600x900 wall paper with no stretching they look perfect.

IDOC Monitoring issue - job BPM_DATA_COLLECTION* not running.

Hi all,
We are facing an issue with BPM "IDOC Monitoring" (under application monitoring), which we have setup to monitor Inbound and Outbound Idocs in 2 separate R/3 systems.
In one system it works fine, and measured values are returned each time the monitor is set to run according to the specified schedule.
However, for another R/3 system, the monitor has never run, even though the settings are identical in the monitoring setup.
From reading the Interfaces Monitoring Setup guide, I found that this monitor depends on a job called BPM_DATA_COLLECTION* which runs in the monitored system. In the system where monitoring is functioning correctly, I can see this job is completing successfully at the time the monitor is set to run. All I find is completed jobs - no scheduled or released jobs present.
However, for the system where the monitoring is not functioning, I found that this job is not running, but that the job is sitting in scheduled status instead.
When I tested manually running the job in this system, it ran successfully, and in Solution Manager the monitor brought back the measured value, so the monitor only ran successfully when I manually ran the job in the monitored system.
I read notes 1321015 & 1339657 relating to IDOC monitoring. 1321015 appears to be more relevant, yet it does not exactly describe my issue - it mentions the job BPM_DATA_COLLECTION* failing rather than just remaining in scheduled status which is what I see.
Anyone else see this issue before?
On a more general point - the standard BPM Setup guide doesn't really go into much detail on IDOC Monitoring, and makes no mention of what is happening in the background, i.e. the job BPM_DATA_COLLECTION* being created and run as per schedule. This info is found in a separate document "Interface Monitoring Setup Guide".
Is there any single document which describes fully what happens both in the Solution Manager and the Monitored systems when BPM is activated? For example, to describe which monitors require jobs to be run, which monitors require additional setup in monitored system, etc? A document such as this which describes exactly the process flow for each monitor would be very useful in troubleshooting issues going forward.
Thanks,
John

Hello John,
most probably the user assigned to the corresponding RFC READ connection that connects SolMan with the backend system doesn't have proper authorization to release a job. That's why it is only created/scheduled but not released. Verify if the RFC user on the backend has the latest CSMREG profile assigned according to SAP note 455356.
You can also check if the latest ST-PI support package is installed on your backend system as the ST-PI usualy contain the latest definition of CSMREG.
Best Regards
Volker

Exactly how does OAM (ICM) monitor the status of services?

Hi all,
I would like to know how OAM (well, ICM really) monitors services.
How does ICM check that a service is up and running? Is some sort of query send to the service that it must respond to? Or does ICM merely do a simple check to see if the service is merely "running" in memory or a "running" process.
The reason I'm asking is because what if the service is "running" as a process but has hung. Checking that it is a currently "running" process will return that yes, it is running. But issuing some kind of interrogation request requiring a response will show that is hanging and thus not running.
Anyone able to shed some kind of light on this for me will be greatly appreciated.
Thanks,
-Greg Cubitt
Oracle South Africa

You can put the ports that connect an important server as managed in fault managements "detailed device view".
DFM doesn't follow HSRPVRRP state
Cheers,
Michel

Dispacher not running

Hello
i installed SAP NetWeaver 7.01 ABAP Trial Version on windows xp
always i use wifi network
i have this problem the dispacher and maxdb can't not run
this log of dev_disp :
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Jun 21 00:00:22 2010
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 12550
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1468 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1468 (pos=2)
SiSelNRemove: removed sock 1468
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1468
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2224) http://dpxxdisp.c 10766
Thanks

Hello
thanks for you replay
i attached log files : stderr2
work process W3 died => ThInit: db_connect
Mon Jun 21 12:54:13 2010
SWITCH TRC-HIDE on ***
work process W6 died => ThInit: db_connect
ICM up and operational (pid: 2992) ***
Shutdown ICM server ................
ICM shutdown completed (pid: 2992) ***
DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
=======================================
sapstart.log:
SAP-R/3-Startup Program
Starting at 2010/06/21 12:53:44
Startup Profile: "D:SAPNSPSYSprofileSTART_DVEBMGS00_SAP"
Starting Programs
(3968) Execute: D:SAPNSPSYSexe
unstrdbs.cmd NSP
(2084) CreateProcess: D:SAPNSPSYSexe
unmsg_server.EXE pf=D:SAPNSPSYSprofileNSP_DVEBMGS00_SAP
(2088) CreateProcess: D:SAPNSPSYSexe
undisp+work.EXE pf=D:SAPNSPSYSprofileNSP_DVEBMGS00_SAP
(4020) Parent Shutdown at 2010/06/21 13:58:04
(4020) kill(SIGINT 2088) failed.
Send Signal SIGKILL to Process 2088
==========================================
dev_W6:
trc file: "dev_w6", trc level: 1, release: "701"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon Jun 21 12:54:14 2010
B create_con (con_name=R/3)
B Loading DB library 'D:SAPNSPSYSexe
undbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(D:SAPNSPSYSexe
undbsdbslib.dll) Error 126
M          Error 126 = "Le module spécifié est introuvable."
B *** ERROR => Couldn't load library 'D:SAPNSPSYSexe
undbsdbslib.dll'
M sysno      00
M sid        NSP
M systemid   560 (PC with Windows NT)
M relno      7010
M patchlevel 0
M patchno    7
M intno      20020600
M make:      multithreaded, ASCII, optimized
M pid        1088
M
M kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 6 1088)
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          8232     (1176)
M DpShMCreate: sizeof(tm_adm)          3786880     (18840)
M DpShMCreate: sizeof(wp_ca_adm)          1280     (60)
M DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm)          528048     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1296)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06820040, size: 4389744)
M DpShMCreate: allocated sys_adm at 06820040
M DpShMCreate: allocated wp_adm at 06821BF8
M DpShMCreate: allocated tm_adm_list at 06823C20
M DpShMCreate: allocated tm_adm at 06823C50
M DpShMCreate: allocated wp_ca_adm at 06BC04D0
M DpShMCreate: allocated appc_ca_adm at 06BC09D0
M DpShMCreate: allocated comm_adm at 06BC0E80
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06C41D30
M DpShMCreate: allocated gw_adm at 06C41D70
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06C41DA0
M DpShMCreate: allocated wall_adm at 06C41DA8
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X   DlLoadLib: LoadLibrary(D:SAPNSPSYSexe
undbsdbslib.dll) Error 126
M          Error 126 = "Le module spécifié est introuvable."
B *** ERROR => Couldn't load library 'D:SAPNSPSYSexe
undbsdbslib.dll'
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192)
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1)
M
M Info for wp 6
M
M    pid = 1088
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_SPOWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server SAP_NSP_00 on host SAP (wp 6)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon Jun 21 12:54:15 2010
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10777
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 6 1088)
=================================================================
|
================================================
dev_rd:
trc file: "dev_rd", trc level: 1, release: "701"
Mon Jun 21 12:54:05 2010
***LOG S00=> GwInitReader, gateway started ( 3572)
systemid   560 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    0
intno      20020600
make:      multithreaded, ASCII, optimized
pid        3572
gateway runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
gateway (version=701.2008.06.23)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Monitoring Architecture disabled, MoniSegmentSize too small: 0 bytes.
ERROR => CCMS: unable to connect to montoring segment of application server! [alxxappl.c   982]
ERROR => GwInitAlertMonitor: AlInit_R3Kernel_AS failed, rc=249
***LOG S10=> GwInitReader, GwInitAlertMonitor ()
switch off alert monitoring
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : 192.168.1.16 SAP (HOSTNAME)
2 : 127.0.0.1 SAP (LOCALHOST)
3 : 192.168.1.10 SAP (NILIST)
Mon Jun 21 12:54:09 2010
4 : 192.168.5.1 SAP (NILIST)
Mon Jun 21 12:54:13 2010
5 : 192.168.10.1 SAP (NILIST)
Full qualified hostname = SAP
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm)          8232     (1176)
DpShMCreate: sizeof(tm_adm)          3786880     (18840)
DpShMCreate: sizeof(wp_ca_adm)          1280     (60)
DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 04320040, size: 4389744)
DpShMCreate: allocated sys_adm at 04320040
DpShMCreate: allocated wp_adm at 04321BF8
DpShMCreate: allocated tm_adm_list at 04323C20
DpShMCreate: allocated tm_adm at 04323C50
DpShMCreate: allocated appc_ca_adm at 046C09D0
DpShMCreate: allocated comm_adm at 046C0E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 04741D30
DpShMCreate: allocated gw_adm at 04741D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04741DA0
MtxInit: -2 0 0
Mon Jun 21 12:55:09 2010
***LOG S30=> GwStopGateway, gateway stopped ()
Thanks

When KM Scheduler is stopped or not running

Hi Experts,
I have created KM Scheduler using the blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515.Scheduled for every 30 mins.
In Systemadmin>Monitor> KM-->i can see whether Scheduler is running or not.
Now the requirement is to send a mail to the portal support team when Scheduler is stopped or not running. Is it possible?and how we can proceed?
Please guide me.
Sony.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

KM Scheduler Task is not running...

Dear All,
I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks. but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
Do i need to configure anything to run KM scheduler Task?
Thanks and Regards,
JAGAN.
Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

Hi Jagan,
The status "0" for your task in "Component Monitor" is fine.
Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
In you task folder, you will see "Service Folder" under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
Name : http://sapportals.com/xmlns/cm/sch
Value: Value1
Also make sure in your portalapp.xml, the values are same:
RFServiceWrapper
service-config
className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
startup= true
service-profile
Name= = http://sapportals.com/xmlns/sch
Prof= Value1
You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
You can use any other name but the it should be same in both the places.
Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
Kind Regards,
Poornima

QMASTER hints 4 usual trouble (QM NOT running/CLUSTEREd nodes/Networks etc

All, I just posted this with some hints & workaround with very common issues people have on this forum and keep asking concerning the use of APPLE QMASTER with FCP, SHAKE, COMPRESSOR and MOTION. I've had many over the last 2 years and see them coming up frequently.
Perhaps these symptoms are fixed in FCS2 at MAY 2007 (now). However if not here's some ROTS that i used for FCP to compressor via QMASTER cluster for example. NO special order but might help someone get around the stuff with QMASTER V2.3, FCP V5.1.4, compressor.app V2.3
I saw the latest QMASTER UI and usage at NAB2007 and it looked a little more solid with some "EASY SETUP" stuff. I hope it has been reworked underneath.. I guess I will know soon if it has.
For most FCP/COMPRESSOR, SHAKE. MOTION and COMPRESSOR:
• provide access from ALL nodes to ALL the source and target objects (files) on their VOLUMES. Simply MOUNT those volumes through the APPLE file system (via NFS) using +k (cmd+k) or finder/go/connect to server. OR using an SSAFS such as XSAN™ where the file systems are all shared over FC not the network. YOu will notice the CPU's going very busy for a small while. THhis is the APPLE FILE SYSTEM task,,, I guess it's doing 'spotlight stuff". This goes away after a few minutes.
• set the COMPRESSOR preferences for "CLUSTER OPTIONS" to "Never copy source to Cluster". This means that all nodes can access your source and target objects (files) over NFS (as above). Failure to to this means LENGTHY times to COPY material back an forth, in some cases undermining the pleasure gained from initially using clustering (reduced job times)
• DONT mix the PHYSICAL or LOGICAL networks in your local cluster. I dont know why but I could never get this to work. Physical mean stick with eother ETHERNET or FIREWIRE or your other (airport etc whic will be generally way to slow and useless), Logical measn leepin all nodes on the SAME subnet. You can do this siply by setting theis up in the system preferences/QMASTER/advanced tab under "Use Network Interfaces". In my currnet QUAd I set this to use BUILT IN ETHERNET1 and in the MPBDC's I set this to their BUILTIN ETHERNET.
• LOGICAL NETWORKS (Subnet): simply HARDCODE an IP address on the ETHERNET (for eample) for your cluster nodes andthe service controller. FOr eample 3.1.1.x .... it will all connect fine.
• Physical Networks: As above (1) DONT MIX firewire (IPoFW) and Ethernet(IPoE). (2) if more than extra service node USE A HUB or SWITCH. I went and bought a 10 port GbE HUB for about $HK400 (€40) and it worked fine. I was NEVER able to get a stable system of QMASTER mixing FW and ETHERNET. (3) fwiw using IP of FW caused me a LOAD of DISK errors and timouts (I/O errors) on thosse DISKs that were FW400 (al gone now) but it showed this was not stable overall
• for the cluster controller node MAKE SURE you set the CLUSTER STORAGE (system preferences/QMASTER/shared cluster storage) for the CLUSTER CONTROLLER NODE IS ON A SHARED volume (See above). This seems essential for SHAKE to work. (if not check the Qmaster errors in the console.app [see below] ). IF you have an SSAFS like XSAN™ then just add this cluster storage on a share file path. NOte that QMASTER does not permit the cluster storage to be on a NETWORK NODE for some reason. So in short just MOUNT the volume where the SHARED CLUSTER file is maintained for the CLUSTER controller.
• FCP - avoid EXPORT to COMPRESSOR from the TIMELINE - it never seems to work properly (see later). Instead EXPORT FROM SEQUENCE in the BROWSER - consistent results
• FCP - "media missing " messages on EXPORT to COMPRESSOR.. seems a defect in FCP 5.1 when you EXPORT using a sequence that is NOT in the "root" or primary trry in the FCP PROJECT BROWSER. Simply if you have browser/bin A contains(Bin B (contains Bin C (contains sequence X))) this will FAIL (wont work) for "EXPORT TO COMPRESSOR" if you use EXPORT to COMPRESSOR in a FCP browser PANE that is separately OPEN. To get around this, simply OPEN/EXPOSE the triangles/trees in the BROWSER PANE for the PROJECT and select the SEQUENCE you want and "EXPORT to COMPRESSOR" from there. This has been documented in a few places in this forum I think.
• FCP -> COMPRESSOR -> .M2V (for DVDSP3): some things here. EXPORTING from an FCP SEQUENCE with CHAPTER MARKERS to an MPEG2 .M2V encoding USING A CLUSTER causes errors in the placement of the chapter makers when it is imported to DVDSP3. In fact CONSISTENTLY, ALL the chapter markers are all PLACED AT THE END of the TRACK in DVD SP# - somewhat useless. This seems to happen ALSO when the source is an FCP reference movie, although inconsistent. A simple work around if you have the machines is TRUN OF SEGMENTING in the COMPRESSOR ENCODER inspector. let each .M2V transcode run on the same service node. FOr the jobs at hand just set up a CLUSTER and controller for each machine and then SELECT the cluster (myclusterA, hisclusterb, herclusterc) for each transcode job.. anyway for me.. the time spent resolving all this I could have TRANSCODED all this on my QUAD and it would all have ben done by sooner! (LOL)
• CONSOLE logs: IF QMASTER fails, I would suggest your fist port of diagnosis should be /Library/Logs/Qmaster in there you will see (on the controller node) compressor.log, jobcontroller.com.apple.qmaster.cluster.admin.log, and lots of others including service controller.com.apple.qmaster.executorX.log (for each cpu/core and node) andd qmasterca.log. All these are worth a look and for me helped me solve 90% of my qmaster errors and failures.
• MOTION 3 - fwiw.. EXPORT USING COMPRESSOR to a CLUSTER seems to fail EVERY TIME.. seems MOTION is writing stuff out to a /var/spool/qmaster
TROUBLESHOOTING QMASTER: IF QMASTER seems buggered up (hosed), then follow these steps PRIOR to restarting you machines.
go read the TROUBLE SHOOTING in the published APPLE docs for COMPRESSOR, SHAKE and "SET UP FOR DISTRIBUTED PROCESSING" and serach these forums CAREFULLY.. the answer is usually there somewhere.
ELSE THEN,, try these steps....
You'll feel that QMASTER is in trouble when you
• see that the QMASTER ICON at the top of the screen says 'NO SERVICES" even though that node is started and
• that the APPLE QMASTER ADMINSTRATOR is VERY SLOW after an 'APPLY" (like minutes with SPINNING BEACHBALL) or it WONT LET YOU DELETE a cluster or you see 'undefined' nodes in your cluster (meaning that one was shut down or had a network failure)..... all this means it's going to get worse and worse. SO DONT submit any more work to QAMSTER... best count you gains and follow this list next.
(a) in COMPRESSOR.app / RESET BACKGROUND PROCESSES (its under the COMPRESSOR name list box) see if things get kick started but you will lose all the work that has been done up to that point for COMPRESSOR.app
b) if no OK, then on EACH node in that cluster, STOP the QMASTER (system preferences/QMASTER/setup [set 0 minutes in the prompt and OK). Then when STOPPED, RESET the shared services my licking OPTION+CLICK on the "START" button to reveal the "RESET SERVICES". Then click "START" on each node to start the services. This has the actin of REMOVING or in the case where the CLUSTER CONTROLLER node is "RESET" f terminating the cluster that's under its control. IF so Simply go to APPLE QMASTER ADMINISTRATOR and REDFINE it. Go restart you cluster.
c) if step (b) is no help, consult the QMASTER logs in /Library/Logs/Qmaster (using the cosole.app) for any FILE MISSING or FILE not found or FILE ERROR . Look carefully for the NODENAME (the machine_name.local) where the error may have occured. Sometimes it's very chatty. Others it is not. ALso look in the BATCH MONITOR OUTPUT for errors messages. Often these are NEVER written (or I cant find them) in the /var/logs... try and resolve any issues you can see (mostly VOLUME or FILE path issues from my experience)
(d) if still no joy then - try removing all the 'dead' cluster files from /var/tmp/qmaster , /var/sppol/qmaster and also the file directory that you specified above for the controller to share the clustering. FOR shake issues, go do the same (note also where the shake shared cluster file path is - it can be also specified in the RENDER FILEOUT nodes prompt).
e) if all this WONT help you, its time to get the BIG hammer out. Simply, STOP all nodes of not stopped. (if status/mode is "STOPPING" then it [QMASTER] is truly buggered). DISMOUNT the network volumes you had mounted. and RESTART ALL YOUR NODES. Tis has the affect of RESTARTING all the QMASTERD tasks. YEs sure you can go in and SUDO restart them but it is dodgy at best because they never seem to terminate cleanly (Kill -9 etc) or FORCE QUIT.... is what one ends up doing and then STILL having to restart.
f) after restart perform steps from (B) again and it will be usually (but not always) right after that
LAstly - here's some posts I have made that may help others for QMASTER 2.3 .. and not for the NEW QMASTER as at MAy 2007...
Topic "qmasterd not running" - how this happened and what we did to fix it. - http://discussions.apple.com/message.jspa?messageID=4168064#4168064
Topic: IP over Firewire AND Ethernet connected cluster? http://discussions.apple.com/message.jspa?messageID=4171772#4171772
LAstly spend some DEDICATED time to using OBJECTIVE keywords to search the FINAL CUT PRO, SHAKE, COMPRESSOR , MOTION and QMASTER forums
hope thats helps.
G5 QUAD 8GB ram w/3.5TB + 2 x 15in MBPCore Mac OS X (10.4.9) FCS1, SHAKE 4.1

Warwick,
Thanks for joining the forum and for doing all this work and posting your results for our benefit.
As FCP2 arrives in our shop, we will try once again to make sense of it and to see if we can boost our efficiencies in rendering big projects and getting Compressor to embrace five or six idle Macs.
Nonetheless, I am still in "Major Disbelief Mode" that Apple has done so little to make this software actually useful.
bogiesan

Monitor not recognized by Mac anymore?????

Hi
This is big and what is APPLE doing to solve this issue??
I just copy some posts from the forum to show how big this issue is, there is 8 more pages with the same problem, and i am one of them!!!!
HELP!!!! WE ARE FREAKING OUT HERE AND NEED A SOLUTION!!!
Yes, me. I have an HP w2207 who worked with my 3 y.o. old MacBook (OS 10.4.??) via the DVI-port flawlessly. Then bought a brandnew MacBook Pro with 10.6.X and the external monitor stopped being recognized. It works now that I have changed the connection to the VGA-port of the monitor (and bought yet another adapter for the MacBook Pro) but the quality is not what I'm used to.
MacBook Pro Mac OS X (10.6.1) HP w2207 external monitor
MattLTH
Posts: 15
From: Salt Lake City, UT USA
Registered: Dec 4, 2007
Re: External monitor not recognized!
Posted: Dec 1, 2009 1:29 PM in response to: cruzcj
Reply Email
Yes. I've tried 7 different Macs including a MacBook Pro with Snow Leopard (10.6.2) and my external monitor doesn't work with it either.
For me here's a recap:
Installed SL on a Mac Pro connected to a 23" Cinema via DVI and Olevia 537 via HDMI Input #1 and now that input no longer works with Mac computers.
Reinstalled 10.5.8 on the Mac Pro and HDMI #1 still didn't work, so I plugged the Mac into HDMI #2 and it worked.
Reinstalled SL on the Mac Pro connected to a 23" Cinema via DVI and Olevia 537 via HDMI Input #2 and now that input no longer works with Mac computers.
Since then, every device (PCs, DVD Players, Video Cameras, etc...) I connect to either of the HDMI inputs work fine. However, neither HDMI input works with ANY of the 7 different Macs (regardless of OS version) I've tried, except for a 10-year-old G4 running Panther or Tiger.
The monitor had previously worked with the MacPro (HDMI input #1) and a G5 (HDMI input #2) for almost 2 years.
When I plug the MacPro into any other monitor via HDMI, it works fine. Same thing with the G5.
My theory is still that the installer for Snow Leopard somehow made my monitor's HDMI inputs incompatible with Macs. I'm so frustrated that I'm ready to buy a new monitor, but since there's no guarantee that a new monitor won't be adversely affected by Snow Leopard, I'm still dubious.
Matt
MacPro, MacBook Pro, PowerMac G5 Mac OS X (10.6.2)
Stephen Darling...
Posts: 59
From: London, UK
Registered: Sep 24, 2004
Re: External monitor not recognized!
Posted: Dec 5, 2009 8:22 AM in response to: Roger Kaufmann
Reply Email
Another "me too" post...
Not sure exactly when it stopped working (since I don't use it every day) but my Viewsonic VX2455wm stopped working with my MacBook recently too. Checked with another MacBook (six months newer than my Late 2006 model) and that exhibited the same problem. Both machines have fully patched Snow Leopard installs. Both started with Tiger. Mine is regularly connected to the external monitor, the other has never been connected. I'm connecting using a DVI cable and a mini-DVI-DVI adapter.
The monitor appears to work correctly. I've checked with a Windows laptop connected on the VGA port. I want to test with another DVI-enabled machine to see whether or not its the cable.
MacBook C2D 2Ghz Mac OS X (10.6.2) iPhone
cruzcj
Posts: 4
From: California
Registered: Nov 28, 2009
Re: External monitor not recognized!
Posted: Dec 13, 2009 10:38 PM in response to: Stephen Darling...
Reply Email
My wife's 15" MBP arrived on Wednesday. Connected it tonight to her new Dell 23" ST2310 via a MiniDisplayPort to VGA and it works fine.
MacBook Pro 15" 2.8GHz Mac OS X (10.6.2)
Gaston55
Posts: 4
From: Sweden
Registered: Dec 15, 2009
Re: External monitor not recognized!
Posted: Dec 15, 2009 12:06 AM in response to: Roger Kaufmann
Reply Email
Hi Guys
I have the same problem with my new Dell 2209WAf. It worked fine before i changed from L to SL.
I didn't know what happened so i have spend hours and hours to resolve the problem.
Hours with Mac support and friends didn't change anything, i still cant make my Dell to work, or show up in preferences. I am working as a photographer and this issue is a real problem.
I just heard from Mac Support that Apple is working on it.....well, doesn't help us with the problem today.
So Apple, DO SOMETHING ABOUT THIS! NOW! this problem should NEVER showed up, this is something you should have fixed before telling all the Macers to upgrade!!!
Macbook Pro Mac OS X (10.6.2)
RWildman465
Posts: 2
From: Illinois
Registered: Dec 16, 2009
Re: External monitor not recognized!
Posted: Dec 16, 2009 1:18 PM in response to: Gaston55
Reply Email
Experiencing the same issues. However, on bit different hardware.
I'm using the XLR8 ProView USB input devices. Using these devices on a mixture of 10.5.8 and 10.6.2 systems (2 MacBooks, 2 Mac Mini and 1 iMac).
I can confirm the following:
When attempting to mirror video, or extend the desktop, using a mini-DVI to S-Video/Composite device on OSX 10.6.2 no video is sent to the mini-DVI device (inputing into the XLR8).
When attempting to mirror video, or extend the desktop, using a mini-DVI to S-Video/Composite device on OSX 10.5.8 video is sent to the mini-DVI device (inputing into the XLR8).
Let me also state, that the mini-DVI port on the Mac Mini's do work. They have been connected to 19" monitors and working without issue. Today, the mini-DVI devices were replaced with minidisplay port devices, which are use in conjunction with the mini-DVI ports.
It would appear, in my case, that the problem is that the mini-DVI port on both the MacBook and Mac Mini, running 10.6.2, as a secondary display device is not operating properly.
iMac Mac OS X (10.6.2)
Todd Camp
Posts: 2
From: Chicago
Registered: Dec 19, 2009
Re: External monitor not recognized!
Posted: Dec 23, 2009 12:41 PM in response to: RWildman465
Reply Email
Same problems here. I reloaded OS 10.4.6 which is what shipped with my MBP1,2 17" 2.16 Intel Core Duo 2GB ram and after installing that, i was able to select 1920x1080 for my external HP w2338h, DVI-VGA, never been able to connect DVI-HDMI. On SL, the max rez I was able to "use" was 1600x1200 which looked horrible. So this leads me to suspect that this must be an issue with SL.
I spoke with Apple Tech support on Sat and was no help. The only suggestion was that I take my MBP and Monitor to the Apple Store. Those of you who are fortunate enough to live in Chicago in the winter, then you know that option really isn't that feasible, it is but just a giant pain.
Early 2006 MBP 17" Mac OS X (10.6.2)
Salm0n
Posts: 1
From: Minneapolis
Registered: Dec 27, 2009
Re: External monitor not recognized!
Posted: Dec 27, 2009 9:57 AM in response to: Todd Camp
Reply Email
I have an iMac 9,1 Intel Core 2 Duo that I bought last June. It came with Leopard, but I upgraded to Snow Leopard. Currently, it's running 10.6.2. My HP w2207 Widescreen monitor works perfectly with it using the DVI port on the HP and the mini-display (not mini-DVI) port on the iMac.
However, I just bought the top-of-the-line iMac 11,1 Intel Core i5 QuadCore three days ago and it crashes nearly every time that it wakes from "sleep" when the HP w2207 is connected to it. It doesn't even recognize that the w2207 is connected to it. Additionally, when the w2207 is connected, it (a) looks terrible - very dim and very granular, and (b) causes the iMac QuadCore to operate very sluggishly. When I disconnect the HP w2207, the iMac QuadCore is lightning-fast.
Much like my older iMac, the QuadCore is running 10.6.2 and I'm using the mini-display port.
iMac 11,1 & iMac 9,1 Mac OS X (10.6.2)
Marjorie Colletta
Posts: 20
Registered: Mar 17, 2005
Re: External monitor not recognized!
Posted: Jan 6, 2010 6:07 PM in response to: Roger Kaufmann
Reply Email
This is a Me too post, I have a MacBook and NEC Multisync Monitor that worked fine before I upgraded to 10.6.2. I've tried to get it to work without any luck. I've written NEC to see if they have a solution.
MacBook 2 GHz Intel Core 2 Duo Mac OS X (10.6.2)
davej147
Posts: 12
Registered: Jun 1, 2006
Re: External monitor not recognized!
Posted: Jan 11, 2010 6:24 AM in response to: Roger Kaufmann
Reply Email
Another me too post. I have a new 17" MacBook Pro with 10.6.2 installed. Trying to connect to an HPL2245wg - sometimes it works flawlessly - other times not at all. Some mornings I spend 30 -40 minutes rebooting, unplugging and plugging the monitor, Detecting Displays, changing the Graphics Card (Energy settings) - all to no avail. Very, very frustrating Apple - please figure out what is going on with this issue....and get it fixed!
17" MacBook Pro Mac OS X (10.6.2) Very happily gave all my XP-stuff away!
Anteck
Posts: 2
From: Australia
Registered: Sep 30, 2009
Re: External monitor not recognized!
Posted: Jan 20, 2010 2:31 PM in response to: Roger Kaufmann
Reply Email
Wow, me too. Did a minor software update (apple released it) last night, got on this morning and BANG - my main 24" Dell display is NOT working.
This is ******, apple have surely f**ked up here. It's never had a hitch, ever, since i bought it 9 months ago.
We are all reporting the same thing - software update, and then no working external display...
APPLE???
Macbook Pro 2.2 15" Mac OS X (10.6.2)
Zedog
Posts: 13
Registered: Aug 10, 2006
Re: External monitor not recognized!
Posted: Jan 20, 2010 2:59 PM in response to: Roger Kaufmann
Reply Email
I seem to have found a fix for myself. I was having terrible issues with the screen blinking and flickering constantly. I tried to reset the SMC with everything unplugged and the computer would not reboot at that point on it's own which led me eventually to reinstalling SL.
Reinstalling SL is quite painless actually as it installs on top of your profile. After reinstalling I ran software update which installs the cumulative upgrades. Now I usually don't have any problems but must follow the instructions to run in clamshell mode to the letter.
After a week of running in clamshell mode I started having an issue with the dock not lining up so I put the computer to sleep, disconnected the monitor and restarted with nothing connected. After that, followed the clamshell mode instructions again and have been working fine again all week.
I've also disabled my screen-saver, and deleted the windowserver preferences as part of my debug process but not sure if that has contributed to my new found stability.
http://support.apple.com/kb/HT3131
Mac OS X (10.6.2)
pragmaik
Posts: 2
From: Duisburg
Registered: Apr 16, 2008
Re: External monitor not recognized!
Posted: Jan 21, 2010 1:08 AM in response to: Roger Kaufmann
Reply Email
Me too. I have a MacBook Pro 2,2 running the latest Snow Leopard 10.6.2. After I have installed yesterday's security patch it does not recognize external displays on the DVI port any longer. Tried it with a 23" DELL at the office and a 23" Samsung at home. Both have worked without any problems for years.
I am curious to learn how this behavior is related to security...

Gaston,
This is not the correct Feedback venue for your issue.
Please select an appropriate product from those displayed HERE and use the corresponding form to communicate to the correct department.
ali b

LogonUI.exe, can't see it in task manager anymore, dose it mean its not running?

after i tried to solve the issue with 26 csrss.exe running, it seemed to meany, i no longer see LogonUI.exe in task manager.
forum posts from csrss.exe topic.
Post 1
i tried process explorer & trying stuff with that i opened a new csrss.exe & that works under my user not system & i cant kill that process (i double clicked on it), after restart it goes away? or should i just pull the cable out? i mane sudden
shut down, status suspended, but it is on the list in task manager, how to get rid off it, end progress tree?
it just it did not have any info about csrss, so i tried to open it with process explorer, but that thing did not do what i though, that's why it all happened.
it also opened new Client server runtime process, i guess that csrss.exe under user is still in task manager list.
Post 2
restart solved the issue, at least it seems so, also that incident removed 24 csrss.exe from task manager, i had 26 running new i have only 2, i did it just to find out that maybe i can remove the csrss.exe what i opened after restart, but i did not expect
this result, maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
some processes disappeared, example LogonUI.exe is no longer running, i had 25 LogonUI.exe running before, with restart it booted, i hope that PC will start tomorrow to, i hope i did not mess up something & it wont start,
or i messed up PC security, made security holes.
Another forum
Post 1
u have no idea what happened, i got both Process Monitor & explorer, i messed up double clicked on csrss.exe & that opened a new csrss.exe in task manager under my user, then i tried to kill the process, but it only suspended it, then i was thinking
maybe after restart it lets me remove it totally from task manager, i made restart & what do i see when i open task manager? i see only 2 csrss.exe running, LOL sometimes messing up fixes the problem.
maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
but all csrss.exe seemed legitimate, & no infection.
Post 2
does LogonUI.exe really run right new? is it just not showing? if its not running then i would have error message or problems with display? it would be funny if tomorrow i have all the 26 csrss.exe back.
is LogonUI.exe running & just hidden, was it normal that LogonUI.exe was shown in task manager before? or is it normal when its hidden? will it effect gaming? cant test, no games installed right new.
but csrss.exe is not the only process that has more then 2 running & some over 10, one i counted it is 25.
ok this are gone to, maybe this were connected to csrss.exe issue, but i have 10 svchost.exe, this should be normal?
some processes disappeared, example LogonUI.exe is no longer running (well it seems it is no longer running, cause its no longer shown in task manager), i had 25 LogonUI.exe running before, with restart it booted, i hope
that PC will start tomorrow to, i hope i did not mess up something & it wont start, or i messed up PC security, made security holes.
i know some of my post i copied here repeat some things i said before, i copied the post cause i was thinking that it will help people to understand my situation better :).
& i only double clicked on csrss.exe in windows system32 & created a new process, & i did end task to it & it was only suspended not killed, there was 2 win explores opened, one was cause i double clicked csrss.exe trough explorer, well u
can see the files with out it, i was unable to remove it so i made a restart, & some processes were gone after that.
i wonder did i mess up my windows & stopped some necessary progresses? despite the fact that PC is running, & seem to be running fine.
csrss.exe was running 25 times & csrss.exe was running 26 times, but there was more processes that were running more then 3 times & they are gone to.
if some processes i don't see any more are necessary i hope they at least run on background silently, is LogonUI.exe meant to run all the time like it did before? or only for few sec on log-on/start-up? so user never see it.
PC seems to run fine right new, i did that stuff yesterday.
i also have alienautopsy & PC-Doctor to what is part of alienautopsy, i mentioned it in case it matters, also when i got in windows i so some strange process for few sec in task manager, its icon looked like computer chip, cant remember the process
name, but if i remember correctly it was DLL or Intel process.
under what name is LogonUI.exe admin tools service? i could check it from there, if u think its necessary

well LogonUI.exe is listed on my task manager again, i mean its back, & about csrss, i have 3 running, i had 2 running yesterday (in task manager all 3 are running under system), with process explorer, it did not matter which of the csrss info i looked,
all is same, all are runede by same processes, i could not copy that info under environment, but what i remember is, one was a Invidia Pshysx, second & 3th was something to do with Intel, then i remember powershel, all that i remember, not worried
about csrss yet, cause its still just 3, but i wonder about LogonUI.exe, for some reason i can't add picture/screenshot here
dunno is it all normal or not, but i write it down here just in case, no problems with high memory nor cpu usage, PC seems to run normally
if its not normal i have no idea whats causing it, i guess i need to just w8 a year or so before i give my PC to shop for maintenance, cause this is beyond me i think, cause no infections found & PC seems to run & function normally, maybe its caused
by some old registry entries, i know registry cleaners are dangerous & can harm windows, so i think windows team should create their own reg cleaner free ware that finds only unnecessary reg entries that are no longer needed, a safe reg cleaner, also it
mite be software issue/bug like example Invidia maybe is creating to meany hosts or how are this things called, csrss is connected to host service as far as i know, same goes for powershell & others that use csrss.exe, or windows bug, or bug that is caused
by both, win8.1 & this drivers, well that's just a guess
maybe its a bug, system has problems with removing some closed processes from the list, or shutting town the ones that were suppose to run temporarily?
maybe i should ignore it until it starts to cause problems? i mean hit performance in a negative way
i also noticed 2 dwm.exe & winlogon.exe running
i used Ccleaner, but not for registry, i cleaned internet temporary files system temporary files event logs & memory dumbs & so on & on (its to much writing to write down all it cleans), if some of this type of files what are deleted with
that, can it cause some processes to multiply? maybe among this files is a file where its written example what processes should be running or which process is connected to which process, like the Path & stuff, so registry cleaning is not the only cleaning
that can cause issues? or is it
coincidence that after cleaning next day i see 1 extra csrss.exe &
dwm.exe & winlogon.exe? either way i don't know do i want to test it & use cleaner 5 days after today again, does windows delete this things i mentioned i cleaned with cclener automatically over time? either way, i think i won't try anything
to solve the extras issue, but if the number of this processes grows & it starts to cause problems i may just take the PC to a expert
PC seems to run & respond normally
EDIT 21/10/2014:
today there is 2 csrss.exe & the other processes are back to 1 as well & LogonUI.exe is gone again, well i did not look processes when i turned PC on, i did it after restart, maybe it accrues after boot when win opens, that some processes remain
& some are double
is it normal that when i'm not doing anything with PC it takes 19% memory after PC start until i shut down & after restart it takes 16% memory (when i use restart button in windows), does this mean start up requires more memory & processes that
remain running after start-up?

CCMS alert not running automatically

Hi,
Can take little time and read this one and please let me know where i am getting mistake, and is anyone can fix alert please let me know
Thanks in Advanced
1. SAPKB64020 Basis Support Package 20 for 6.40 imported at 13.12.2007
2. check SU01 User Roles SAP_BC_BASIS_ADMIN, SAP_BC_ALM_CUST, SAP_ALM_ADMINISTRATOR, SAP_BC_ALM_ALERT_USER
3. check SU01 comm.meth: e m a i l
4. User Profile: S_A.SCON, SAP_ALL
5. SMTP configured fine, internal mail works fine
6. RZ21 - Copied CCMS_OnAlert_E m a i l to ZCCMS_OnAlert_E m a i l
   Execution Tab: Function Modle (SALO_M A I L_IN_CASE_OF_ALERT)
      Execute method on group (any server)
   Control Tab: Execute method (Periodically in dialog process
      Startup method group (checked -Execute method immediately after monitoring segment start- )
      Selected (On all application servers)
   Paramaters Tabe: SENDER: awan_t
                    RECIPIENT:user @ company . com
              RECIPIENT-TYPEID: U
              SUBJECT_ALERT: This is CCMS from $SID
              $NODENAME
              $SEGMENT: Segment name node (= $INSTANCE )
   Release Tabe: (Checked Auto-reaction)
7. RZ20 - SAP CCMS Monitor Templates
        --> Entire System
           --> XDV
              --> Appication Server
                 --> SID ID
                   --> Operating System
                      --> Memory
                         --> Free Memory
   Selected Free memory and click properity
   Performance Attribute Tab: Comparison value (Selected Last reported value)
   Green to Yellow 10MB
   Yellow to Red 20MB
   Red to Yellow 10MB
   Rest from yellow to green 5mb
   Method Tab: Data collection method: CCMS_Mem_Collect_c
   auto-reaction method: zCCMS_OnAlert_mail
   Analysis method: CCMS_OS_Analze
8. Goback to MTE Free memory (Refresh) and click open alert pushbutton
   it shows Free memory [ 1 Alert ], 49BM < 20 MB current value below throshold value
9. click Extras from menu and actived mantannce function
10. Goto EDIT from menu --> Nodes (MTE) --> Start method --> Start auto-reaction method
11. I received e-mail when I started auto-reaction method
Alert not running automacally ?

Hi,
Can take little time and read this one and please let me know where i am getting mistake, and is anyone can fix alert please let me know
Thanks in Advanced
1. SAPKB64020 Basis Support Package 20 for 6.40 imported at 13.12.2007
2. check SU01 User Roles SAP_BC_BASIS_ADMIN, SAP_BC_ALM_CUST, SAP_ALM_ADMINISTRATOR, SAP_BC_ALM_ALERT_USER
3. check SU01 comm.meth: e m a i l
4. User Profile: S_A.SCON, SAP_ALL
5. SMTP configured fine, internal mail works fine
6. RZ21 - Copied CCMS_OnAlert_E m a i l to ZCCMS_OnAlert_E m a i l
   Execution Tab: Function Modle (SALO_M A I L_IN_CASE_OF_ALERT)
      Execute method on group (any server)
   Control Tab: Execute method (Periodically in dialog process
      Startup method group (checked -Execute method immediately after monitoring segment start- )
      Selected (On all application servers)
   Paramaters Tabe: SENDER: awan_t
                    RECIPIENT:user @ company . com
              RECIPIENT-TYPEID: U
              SUBJECT_ALERT: This is CCMS from $SID
              $NODENAME
              $SEGMENT: Segment name node (= $INSTANCE )
   Release Tabe: (Checked Auto-reaction)
7. RZ20 - SAP CCMS Monitor Templates
        --> Entire System
           --> XDV
              --> Appication Server
                 --> SID ID
                   --> Operating System
                      --> Memory
                         --> Free Memory
   Selected Free memory and click properity
   Performance Attribute Tab: Comparison value (Selected Last reported value)
   Green to Yellow 10MB
   Yellow to Red 20MB
   Red to Yellow 10MB
   Rest from yellow to green 5mb
   Method Tab: Data collection method: CCMS_Mem_Collect_c
   auto-reaction method: zCCMS_OnAlert_mail
   Analysis method: CCMS_OS_Analze
8. Goback to MTE Free memory (Refresh) and click open alert pushbutton
   it shows Free memory [ 1 Alert ], 49BM < 20 MB current value below throshold value
9. click Extras from menu and actived mantannce function
10. Goto EDIT from menu --> Nodes (MTE) --> Start method --> Start auto-reaction method
11. I received e-mail when I started auto-reaction method
Alert not running automacally ?

Wily Introscope is not running in Solution Manager 7.1

Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
Hanuman

Hello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar

ICM Monitor Not Running

Similar Messages

Maybe you are looking for