ICM-Server
is there a possibility do change the parameter "icm/host_name_full". because i don't want do work everytime on the server when i will create webdynpros.
Thank you,
Markus
> yes you can change it. this can be done from
> trasaction RZ10.
oh, i tried this, but it does not work. I also wantedm to change the number of processes and it does not work.
> <i>because i don't want do work everytime on the
> e server when i will create webdynpros</i>.
>
> can you explain a little more on this.
if i look to RZ11 in the parameter it points to localhost. If I want to create Web Dynpro from another host SE80 also points to localhost, so I must work on the server to create the application.
I hope you unterstand the problem.
Markus
Similar Messages
-
Hello,
I'm using SAP ERP 2005 : ECC 6.0 with AS JAVA, ABAP and EP
I have create a BSP IView in my Portal to access an BSP application in SAP ERP 2005.
When I test it, the IView open too many sessions.
In my dev_icm log I have too many of this line :
[Thr 8156] Mon Nov 20 10:40:44 2006
[Thr 8156] ISC: can't compute cache key (rc=3)
[Thr 4704] ISC: can't compute cache key (rc=3)
[Thr 8316] ISC: can't compute cache key (rc=3)
[Thr 9820] ISC: can't compute cache key (rc=3)
[Thr 4044] ISC: can't compute cache key (rc=3)
I have configure the SSO.
What is the error with the ICM Server Cache ?
Thank you for your help.
MathieuHi Mathieu,
if you haven't done yet, please have a look at SAP Note 532050 and 975004. Perhaps they will solve your problem.
Regards
Bernd -
Dear All,
We have the Hosted IPCC 7.0 Setup, As we understand the time synchornized with the Domain Controller timing,
When ever we would like to adjust the time 1 or 2 minutes difference we are getting the following error on the NAM router.
Peripheral CVP_PG1_PIM5 (ID 5004) switched to half-hour 32 approximately 161 seconds before the central controller.
Peripheral CVP_PG1_PIM2 (ID 5001) switched to half-hour 32 approximately 161 seconds before the central controller.
We have understood that above mentioned peripheral (CVP Call Servers) timing got changed but none of the ICM machines timing affected.
Due to this problem we are getting the above error. Any body experienced the same kind issue, Kindly share your experience / work around / best practise.
Thanks in Advance.
ManivannanIf everything is set to sync their time to the domain, the best thing to do is to change the time on the DC, and let everything change on its own (which it seems you've done).
The message you see is Informational, not necessarily an error. It is just an indication that your ACD reporting may be slightly off vs. ICM reporting.
As you see, the CVP boxes will change time 'immediately' when it gets a time change message from the domain.
The ICM servers (rtrs, pgs, etc.) will not 'jump' their time ahead/back by the two minutes. One of the functions of MDS on these servers is to manage ICM time. ICM time will 'drift' faster or slower by 10% until MDS time matches the system (domain) time. This is to prevent jumping backward/forward by such large increments.
I.e. if you change your domain time by six minutes, it'll take an hour for ICM time to 'drift' and eventually match the domain time.
IOW - the system is working as designed, and you really shouldn't do anything other than what you did. -
Where is the binary data of this icon stored and retrieved from Application server?
Hello guys,
Today I observed one phenomenon and could not explain it per my knowledge.
I have one url which points to an icon in application server:
https://<host name>:44301/sap/public/bc/ur/nw5/themes/sap_corbu/common/libs/Icon/SuccessMessage.gif
I could successfully open it via chrome:
and after that I could see an entry in ICM server cache. Everything works perfectly.
Then I tried to check this icon in mime browser in SE80. To my surprise, the folder /sap/public/bc/ur/nw5/themes is empty.
However, the ICM cache shows that there is a subfolder called "sap_corbu" under "themes" folder. But why I cannot find it in mime browser?
Then I write a report to retrieve the binary data of icon via CL_HTTP_CLIENT, and clear the ICM buffer via tcode SMICM.
I expect this time some database table will be queried to load the content of the icon, since now the buffer is not available.
To my surprise again, in SAT no database table is involved.
So now I am confused: since I have already cleared the ICM server cache, where does the icon binary data come from when I run the report to access the icon?
Best regards,
JerryHello guys,
one colleague today told me that there is a zip file "ur_mimes_nw7.zip" in MIME repository /PUBLIC/BC/UR/ur_mines_nw7.zip. I download it locally and unzip it and indeed find many theme folders including sap_corbu folder and its resource files. So I guess there must be some logic done in web application server which will unzip this archive file and put each theme folder to the corresponding folders in application server. I would assume those logic are done outside ABAP stack side, this is the reason I cannot find any hint of them in ABAP backend via tcode SAT even I clear both client and server side cache.
Best regards,
Jerry -
Disp+work process starts than dies in SAP R/3 4.7 Ent. server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)Hi Bapujee,
I upgraded kernel 6.20 (Patch level 1602)as per the details you mentioned. when i restarted the server the message server starts perfectly,but disp+work process turns to yellow than dies(during that time WP Table is blank).
Also attaching dev_w0 file.
thanks & regards,
sreepathi
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue May 16 23:38:55 2006
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' ...
B Library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' loaded
B Version of 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' is "620.02", patchlevel (0.1599)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 1602
M intno 20020600
M make: multithreaded, ASCII
M pid 3180
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3180) [dpxxdisp.c 1088]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12920 (760)
M DpShMCreate: sizeof(tm_adm) 1835536 (9132)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D10040, size: 2122960)
M DpShMCreate: allocated sys_adm at 05D10040
M DpShMCreate: allocated wp_adm at 05D10678
M DpShMCreate: allocated tm_adm_list at 05D138F0
M DpShMCreate: allocated tm_adm at 05D13918
M DpShMCreate: allocated wp_ca_adm at 05ED3B28
M DpShMCreate: allocated appc_ca_adm at 05ED8178
M DpShMCreate: allocated comm_adm_list at 05ED98E8
M DpShMCreate: allocated comm_adm at 05ED9900
M DpShMCreate: allocated ca_info at 05F08700
M DpShMCreate: allocated wall_adm at 05F08708
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue May 16 23:38:57 2006
M calling db_connect ...
C
C DBADASLIB : version 620.02
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.1599) Set isolation level calls optimized (note 762712)
C (0.1491) ThGetWpId corrected (note 624930)
C (0.1412) Support of SAPDB database hints (note 652096)
C (0.1411) LobGetpiece returns a failure if no data available (note 720343)
C (0.1355) SAPDB supports DBSL_CMD_INI_KRN_CALLBACK (note 624930)
C (0.1352) CHECKPOINT NOWAIT removed (note 708201)
C (0.1278) UPDSTAT without tracefile (note 696689)
C (0.1267) Explain problem with RAW values and IN-clause fixed (note 692188)
C (0.1189) Explain for database version 7.5 changed (note 680586)
C (0.1115) Object consistency (note 650475)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.3180.pct
C Precompiler Runtime : C-PreComp 7.3.1 Build 007-000-087-566
C Precompiler runtime is SAP DB 7.3.1.007
C *** ERROR => Using non supported SAP DB precompiler runtime version: 7.3.1.007
[dbslada.c 5093]
C *** ERROR => Min. version for this release must be 7.3.1.010
[dbslada.c 5095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1200]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8812]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M rq_info = 0
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue May 16 23:38:57 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8957
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 233]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3180) [dpnttool.c 356]
Message was edited by: Sreepathi -
Disp+work process starts than dies in SAP R/3 4.7 Enterprise server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)these are the content of some log files plz help me out my sap system is not starting my work process is ending in some ended status
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Thu Oct 15 20:22:46 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Thu Oct 15 20:23:12 2009
ERROR => W0 (pid 3988) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3996) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 4004) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 4016) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 4032) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 4040) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 4048) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 4056) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4064) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 4072) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 4080) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 4088) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 624) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 456) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 576) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Thu Oct 15 20:23:17 2009
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3912) [dpxxdisp.c 7883]
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 3908] Thu Oct 15 20:22:00 2009
[Thr 3908] MsSSetTrcLog: trc logging not active
[Thr 3908] relno 6200
[Thr 3908] patchlevel 0
[Thr 3908] patchno 665
[Thr 3908] intno 20020600
[Thr 3908] pid 3904
[Thr 3908] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3904) [msxxserv.c 1524]
[Thr 3908] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 3908] MsHttpOwnDomain: own domain[1] = microsoft.com
[Thr 3908] *** I listen to port sapmsDEV (3600) ***
[Thr 3908] *** HTTP LISTEN ***
[Thr 3908] *** I listen to HTTP port 8100 ***
[Thr 3908] CUSTOMER KEY: >H2132125860<
[Thr 3908] Thu Oct 15 20:23:17 2009
[Thr 3908] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1094]
[Thr 3908] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 8523]
[Thr 3908] *** ERROR => MsSClientHandle: MsSRead C1 (sap_DEV_00), MSEINTERN [msxxserv.c 3662]
[Thr 3908] Thu Oct 15 20:33:37 2009
[Thr 3908] *** ERROR => MsSCheckConnections: no response from client C0 (192.168.1.25) after 300 secs received [msxxserv.c
2910]
[Thr 3908] *** ERROR => MsSCheckConnections: disconnect now [192.168.1.25] [msxxserv.c 2914]
[Thr 3936] Thu Oct 15 20:37:12 2009
[Thr 3936] MsSExit: received SIGINT (2)
[Thr 3936] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3904) [msxxserv.c 4811]
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 15 20:22:46 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3988
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3988) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12032 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 055B0040, size: 1977072)
M DpShMCreate: allocated sys_adm at 055B0040
M DpShMCreate: allocated wp_adm at 055B0560
M DpShMCreate: allocated tm_adm_list at 055B3460
M DpShMCreate: allocated tm_adm at 055B3488
M DpShMCreate: allocated wp_ca_adm at 05750148
M DpShMCreate: allocated appc_ca_adm at 05754798
M DpShMCreate: allocated comm_adm_list at 05755F08
M DpShMCreate: allocated comm_adm at 05755F20
M DpShMCreate: allocated ca_info at 05784D20
M DpShMCreate: allocated wall_adm at 05784D28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Thu Oct 15 20:22:48 2009
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C
C Thu Oct 15 20:22:49 2009
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=03BFC74C,svrhp=06D04FC4)
C
C Thu Oct 15 20:22:50 2009
C Starting user session (con_hdl=0,svchp=03BFC74C,srvhp=06D04FC4,usrhp=06D0D7A4)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=03BFC74C,srvhp=06D04FC4,usrhp=06D0D7A4)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_DEV_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 15 20:22:50 2009
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3988) [dpnttool.c 346]
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 15 20:22:36 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3996
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 3996) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12032 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 055B0040, size: 1977072)
M DpShMCreate: allocated sys_adm at 055B0040
M DpShMCreate: allocated wp_adm at 055B0560
M DpShMCreate: allocated tm_adm_list at 055B3460
M DpShMCreate: allocated tm_adm at 055B3488
M DpShMCreate: allocated wp_ca_adm at 05750148
M DpShMCreate: allocated appc_ca_adm at 05754798
M DpShMCreate: allocated comm_adm_list at 05755F08
M DpShMCreate: allocated comm_adm at 05755F20
M DpShMCreate: allocated ca_info at 05784D20
M DpShMCreate: allocated wall_adm at 05784D28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Thu Oct 15 20:22:44 2009
M calling db_connect ...
C
C Thu Oct 15 20:22:45 2009
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C
C Thu Oct 15 20:22:49 2009
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=07BD053C,svrhp=07BD27A4)
C
C Thu Oct 15 20:22:51 2009
C Starting user session (con_hdl=0,svchp=07BD053C,srvhp=07BD27A4,usrhp=07BDAF84)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=07BD053C,srvhp=07BD27A4,usrhp=07BDAF84)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_DEV_00 on host sap (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 15 20:22:51 2009
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3996) [dpnttool.c 346] -
I am using Jackrabbit Repository (jcr's implementation) as backend in my Web Appl.Whose data persists on Oracle Database. To make connection with Oracle database jackrabbit provide provision of JNDI Lookup to read the data source defined in WAS (using WAS 8.0.0.4 as App Server).
I am able to perform JNDI Lookup everywhere in my application,But in a flow where i am creating a Thread using Java Concurrent Api and insidethread's call() method when I am trying for JNDI Look following exception occurs –
[8/20/13 10:57:35:163 IST] 000000dd System Out O ERROR 20-08 10:57:35,163 (DatabaseFileSystem.java:init:209) failed to initialize file system
javax.jcr.RepositoryException: JNDI name not found: java:comp/env/jdbc/ofsds
at org.apache.jackrabbit.core.util.db.ConnectionFactory.getJndiDataSource(ConnectionFactory.java:295)
at org.apache.jackrabbit.core.util.db.ConnectionFactory.createDataSource(ConnectionFactory.java:233)
at org.apache.jackrabbit.core.util.db.ConnectionFactory.getDataSource(ConnectionFactory.java:166)
at org.apache.jackrabbit.core.fs.db.DbFileSystem.getDataSource(DbFileSystem.java:226)
at org.apache.jackrabbit.core.fs.db.DatabaseFileSystem.init(DatabaseFileSystem.java:190)
at org.apache.jackrabbit.core.config.RepositoryConfigurationParser$6.getFileSystem(RepositoryConfigurationParser.java:1057)
at org.apache.jackrabbit.core.config.RepositoryConfig.getFileSystem(RepositoryConfig.java:911)
at org.apache.jackrabbit.core.RepositoryImpl.<init>(RepositoryImpl.java:285)
at org.apache.jackrabbit.core.RepositoryImpl.create(RepositoryImpl.java:605)
at org.apache.jackrabbit.core.TransientRepository$2.getRepository(TransientRepository.java:232)
at org.apache.jackrabbit.core.TransientRepository.startRepository(TransientRepository.java:280)
at org.apache.jackrabbit.core.TransientRepository.login(TransientRepository.java:376)
at com.mmpnc.icm.server.repository.RepositoryStartupService.newSession(RepositoryStartupService.java:408)
at com.mmpnc.icm.server.repository.RepositoryStartupService.newSession(RepositoryStartupService.java:355)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.intercept.RootInvocationContext.proceed(RootInvocationContext.java:31)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:56)
at org.jboss.seam.transaction.RollbackInterceptor.aroundInvoke(RollbackInterceptor.java:28)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.RepositoryStartupService_$$_javassist_1.newSession(RepositoryStartupService_$$_javassist_1.java)
at com.mmpnc.icm.server.repository.ICMHouseKeepingSessionManager.create(ICMHouseKeepingSessionManager.java:37)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.intercept.RootInvocationContext.proceed(RootInvocationContext.java:31)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:56)
at org.jboss.seam.transaction.RollbackInterceptor.aroundInvoke(RollbackInterceptor.java:28)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.BijectionInterceptor.aroundInvoke(BijectionInterceptor.java:77)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.ICMHouseKeepingSessionManager_$$_javassist_8.create(ICMHouseKeepingSessionManager_$$_javassist_8.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.util.Reflections.invokeAndWrap(Reflections.java:138)
at org.jboss.seam.Component.callComponentMethod(Component.java:2171)
at org.jboss.seam.Component.callCreateMethod(Component.java:2094)
at org.jboss.seam.Component.newInstance(Component.java:2054)
at org.jboss.seam.Component.getInstance(Component.java:1948)
at org.jboss.seam.Component.getInstance(Component.java:1910)
at org.jboss.seam.Component.getInstance(Component.java:1904)
at org.jboss.seam.Component.getInstanceInAllNamespaces(Component.java:2271)
at org.jboss.seam.Component.getValueToInject(Component.java:2223)
at org.jboss.seam.Component.injectAttributes(Component.java:1663)
at org.jboss.seam.Component.inject(Component.java:1481)
at org.jboss.seam.core.BijectionInterceptor.aroundInvoke(BijectionInterceptor.java:61)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.ICMHouseKeepingRepository_$$_javassist_7.create(ICMHouseKeepingRepository_$$_javassist_7.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.util.Reflections.invokeAndWrap(Reflections.java:138)
at org.jboss.seam.Component.callComponentMethod(Component.java:2171)
at org.jboss.seam.Component.callCreateMethod(Component.java:2094)
at org.jboss.seam.Component.newInstance(Component.java:2054)
at org.jboss.seam.Component.getInstance(Component.java:1948)
at org.jboss.seam.Component.getInstance(Component.java:1910)
at org.jboss.seam.Component.getInstance(Component.java:1904)
at org.jboss.seam.Component.getInstanceInAllNamespaces(Component.java:2271)
at org.jboss.seam.Component.getValueToInject(Component.java:2223)
at org.jboss.seam.Component.injectAttributes(Component.java:1663)
at org.jboss.seam.Component.inject(Component.java:1481)
at org.jboss.seam.core.BijectionInterceptor.aroundInvoke(BijectionInterceptor.java:61)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.ICMHouseKeepingManager_$$_javassist_6.create(ICMHouseKeepingManager_$$_javassist_6.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.util.Reflections.invokeAndWrap(Reflections.java:138)
at org.jboss.seam.Component.callComponentMethod(Component.java:2171)
at org.jboss.seam.Component.callCreateMethod(Component.java:2094)
at org.jboss.seam.Component.newInstance(Component.java:2054)
at org.jboss.seam.Component.getInstance(Component.java:1948)
at org.jboss.seam.Component.getInstance(Component.java:1910)
at org.jboss.seam.Component.getInstance(Component.java:1904)
at org.jboss.seam.Component.getInstance(Component.java:1899)
at com.mmpnc.icm.server.concurrent.PerformCloseTask.call(PerformCloseTask.java:136)
at com.mmpnc.icm.server.concurrent.PerformCloseTask.call(PerformCloseTask.java:1)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:314)
at java.util.concurrent.FutureTask.run(FutureTask.java:149)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:770)
Caused by:
javax.naming.ConfigurationException: A JNDI operation on a "java:" name cannot be completed because the server runtime is not able to associate the operation's thread with any J2EE application component. This condition can occur when the JNDI client using the "java:" name is not executed on the thread of a server application request. Make sure that a J2EE application does not execute JNDI operations on "java:" names within static code blocks or in threads created by that J2EE application. Such code does not necessarily run on the thread of a server application request and therefore is not supported by JNDI operations on "java:" names. [Root exception is javax.naming.NameNotFoundException: Name comp/env/jdbc not found in context "java:".]
at com.ibm.ws.naming.java.javaURLContextImpl.throwExceptionIfDefaultJavaNS(javaURLContextImpl.java:522)
at com.ibm.ws.naming.java.javaURLContextImpl.throwConfigurationExceptionWithDefaultJavaNS(javaURLContextImpl.java:552)
at com.ibm.ws.naming.java.javaURLContextImpl.lookupExt(javaURLContextImpl.java:481)
at com.ibm.ws.naming.java.javaURLContextRoot.lookupExt(javaURLContextRoot.java:485)
at com.ibm.ws.naming.java.javaURLContextRoot.lookup(javaURLContextRoot.java:370)
at org.apache.aries.jndi.DelegateContext.lookup(DelegateContext.java:161)
at javax.naming.InitialContext.lookup(InitialContext.java:436)
at org.apache.jackrabbit.core.util.db.ConnectionFactory.getJndiDataSource(ConnectionFactory.java:280)
... 114 more
Caused by:
javax.naming.NameNotFoundException: Name comp/env/jdbc not found in context "java:".
at com.ibm.ws.naming.ipbase.NameSpace.getParentCtxInternal(NameSpace.java:1969)
at com.ibm.ws.naming.ipbase.NameSpace.retrieveBinding(NameSpace.java:1376)
at com.ibm.ws.naming.ipbase.NameSpace.lookupInternal(NameSpace.java:1219)
at com.ibm.ws.naming.ipbase.NameSpace.lookup(NameSpace.java:1141)
at com.ibm.ws.naming.urlbase.UrlContextImpl.lookupExt(UrlContextImpl.java:1436)
at com.ibm.ws.naming.java.javaURLContextImpl.lookupExt(javaURLContextImpl.java:477)
... 119 moreOkay "damorgan", you seem to have me confused with a newbie. All I'm posting is the info that I got from my Sys Admin on the fix to my problem I encountered when trying to install Oracle 11g (11.2.0.0) on Red Hat Linux Enterprise 5. Since we're mouting onto an NFS, these are the steps he took. I'm not trying to "hide" information or post as little as possible. What other info do you want? I don't know what you are referring to when you mention "Filer, make, model, software version"? Please elaborate. I was just trying to post to others that may have encountered this problem, and I get somewhat attacked by you. I don't assume anyone can read my mind (especially you).
-
hi
Our company made the EP7.0 display the report of Ecc5.0 with ITS.But it often bring on the ICM server down.I check the trace file of the ICM,IT has this error:
Thr 49859 Sun Jan 6 21:12:32 2008
Thr 49859 *** WARNING => Connection request from (0/0/0) to host: sapci.com.cn, service: 8000 failed (NIEHOST_UNKNOWN)
http://icxxconn_mt.c 2123
Thr 45490 Sun Jan 6 21:12:36 2008
Thr 45490 IcmConnCancel: Connection (id=20/4849) canceled manually
Thr 22617 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 52429 Sun Jan 6 21:12:45 2008
Thr 52429 IcmConnCancel: Connection (id=16/3520) canceled manually
Thr 54999 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 59625 Sun Jan 6 21:12:52 2008
Thr 59625 IcmConnCancel: Connection (id=25/7225) canceled manually
Thr 109484 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 51401 Sun Jan 6 21:12:56 2008
Thr 51401 *** ERROR => IcmConnCancel: entry unused: 25/7225 http://icxxconn_mt. 661
Thr 52943 Sun Jan 6 21:13:03 2008
Thr 52943 IcmConnCancel: Connection (id=24/5660) canceled manually
Thr 56541 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 55770 Sun Jan 6 21:13:13 2008
Thr 55770 IcmConnCancel: Connection (id=3/4543) canceled manually
Thr 56798 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 57312 Sun Jan 6 21:13:24 2008
Thr 57312 IcmConnCancel: Connection (id=7/3952) canceled manually
Thr 17220 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 52686 Sun Jan 6 21:13:31 2008
Thr 52686 IcmConnCancel: Connection (id=1/5620) canceled manually
Thr 23131 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 59111 Sun Jan 6 21:13:37 2008
Thr 59111 IcmConnCancel: Connection (id=11/5358) canceled manually
Thr 83527 *** ERROR => IcmConnRollOutWP: MpiHandleOOBData failed (rc=7) http://icxxthr_mt.c 2252
Thr 61167 *** WARNING => Connection request from (0/0/0) to host: sapci.com.cn, service: 8000 failed (NIEHOST_UNKNOWN)
http://icxxconn_mt.c 2123
And I found I can't restart the Icm server when the sap server is running.Hi Guangli,
I would suggest to create a SAP customer message on component BC-CST-IC.
Best regards,
Klaus -
Adding ICM and CVP Servers in CUOM
Hi,
I want to know how can I add ICM and CVP servers to Cisco Unified Operation Managers. I have read the document and as per that we need to enable and configure SNMP service on servers. But I am unable to start SNMP service on one of ICM server i.e. AW. The below mentioned message is appearing on start of SNMP service. Please advise the best way to add all IPCC servers to CUOM and to get the best possible results from CUOM.
Regards,
Hammad."The Microsoft Windows SNMP service for processing SNMP requests is disabled as part of Unified CCE setup and replaced by the Unified CCE SNMP Management service. The Unified CCE SNMP Management service is provided for more sophisticated SNMP capabilities than are offered by the standard Microsoft Windows SNMP service."
If you look at your Services on your UCCE server you should see the service Cisco Contact Center SNMP Management.
Take a look at this white paper on the subject....
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/white_paper_c11-543550.html
Also, here's the link to the SNMP guide for UCCEv7
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/configuration/guide/snmp70ug.pdf
Hope this helps -
Adding IPCC ICM and CVP servers to CUOM
Hi,
I want to know how can I add ICM and CVP servers to Cisco Unified Operation Managers. I have read the document and as per that we need to enable and configure SNMP service on servers. But I am unable to start SNMP service on one of ICM server i.e. AW. The below mentioned message is appearing on start of SNMP service. Please advise the best way to add all IPCC servers to CUOM and to get the best possible results from CUOM.
Regards,
Hammad."The Microsoft Windows SNMP service for processing SNMP requests is disabled as part of Unified CCE setup and replaced by the Unified CCE SNMP Management service. The Unified CCE SNMP Management service is provided for more sophisticated SNMP capabilities than are offered by the standard Microsoft Windows SNMP service."
If you look at your Services on your UCCE server you should see the service Cisco Contact Center SNMP Management.
Take a look at this white paper on the subject....
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/white_paper_c11-543550.html
Also, here's the link to the SNMP guide for UCCEv7
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/configuration/guide/snmp70ug.pdf
Hope this helps -
Hi
I have installed the SAP application server Java EE5 and then installed NTW developer studio SP17. I have started the application server and in the NTW studio, in the J2EE engine, I can see only server0 and icm server but could not see sdm server.
When i am trying to deploy, i get an error message saying sdm server empty.
How do i solve this issue.
Thanks
NavneetHi navneet,
Try this in the netweaver studio go to windows menu
select preferences and then select SAP J2EE Engine
check the SAP J2EE engine located on local host
and then try deploying and let me know whether it is working or not
cheers
ram -
BSP PDF not working in ECC 6.0
Hello all, we are upgrading from 4.7 to ECC 6.0 and we have several BSP programs that create pdf reports by converting data from the r/3 spool. This following code works fine in SAP 4.7 but in ECC 6.0, I am getting the error: 'File does not begin with '%pdf-'. The following is the code to convert a file from the spool and display in pdf format. Again, this works in 4.7.
Any help is appreciated
IF ztsp01-rqapprule LE 99.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = ztsp01-rqident
no_dialog = 'X'
TABLES
pdf = witab
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 8
err_btcjob_submit_failed = 9
err_btcjob_close_failed = 10
OTHERS = 11.
Get spool name.
zabapspoolid = ztsp01-rqident.
Delete spool.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = zabapspoolid.
IF sy-subrc EQ 0.
LOOP AT witab INTO itab.
TRANSLATE itab USING ' ~'.
CONCATENATE output itab INTO output IN CHARACTER MODE.
ENDLOOP.
TRANSLATE output USING '~ ' .
Convert the Character String to Binary String.
DATA: r_string TYPE string.
DATA: r_xstring TYPE xstring.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
IMPORTING
buffer = outputx.
CREATE OBJECT cached_response TYPE cl_http_response EXPORTING
add_c_msg = 1.
DATA:l_pdf_len TYPE i.
l_pdf_len = XSTRLEN( outputx ).
l_pdf_len = strlen( output ).
cached_response->set_data( data = outputx
cached_response->set_cdata( data = output
length = l_pdf_len ).
cached_response->set_header_field( name =
if_http_header_fields=>content_type
value = 'application/pdf' ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 30 ).
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
CONCATENATE runtime->page_url '/' guid '.pdf' INTO
display_url.
cl_http_server=>server_cache_upload( url = display_url
response = cached_response ).
ENDIF.
RETURN.
ELSE.
zabapspoolid = ztsp01-rqident.
Delete spool.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = zabapspoolid.
page->messages->add_message(
condition = 'page'
message =
'Display is greater than 99 pages. Use a smaller selection.'
severity = page->messages->co_severity_error ).
ENDIF.Hello all, SAP just issued a fix for PDF conversion in a Unicode environment on 4/7/09. This fixes function modules 'CONVERT_ABAPSPOOLJOB_2_PDF' and 'CONVERT_OTFSPOOLJOB_2_PDF' among others. They are notes 1320163 and 1324547. I have included the code to display a spool file in a BSP application using the lastest version of the function module.
Data:
text(68) TYPE c,
pdf_xstring type xstring,
bin_size type i,
l_pdf_len type i.
IF ztsp01-rqapprule LE 99.
Convert binary xstring to PDF.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = ztsp01-rqident
no_dialog = 'X'
pdf_destination = 'X'
no_background = 'X'
importing
pdf_bytecount = bin_size
bin_file = pdf_xstring
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Get spool name.
zabapspoolid = ztsp01-rqident.
Delete spool.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = zabapspoolid.
IF sy-subrc EQ 0.
LOOP AT witab INTO itab.
TRANSLATE itab USING ' ~'.
CONCATENATE output itab INTO output IN CHARACTER MODE.
ENDLOOP.
TRANSLATE output USING '~ ' .
Convert the Character String to Binary String.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = output
IMPORTING
buffer = outputx.
Instantiate Object
CREATE OBJECT cached_response
TYPE
cl_http_response
EXPORTING
add_c_msg = 1.
Determine length of pdf xstring.
l_pdf_len = XSTRLEN( pdf_xstring ).
Sets the HTTP body of this entity to the given binary data.
cached_response->set_data( data = pdf_xstring
length = l_pdf_len ).
Sets the value of the specified header field.
cached_response->set_header_field( name =
if_http_header_fields=>content_type
value = 'application/pdf' ).
Sets current HTTP status code
cached_response->set_status( code = 200 reason = 'OK' ).
Sets relative expiry time for this response in server cache.
cached_response->server_cache_expire_rel( expires_rel = 30 ).
Create GUID.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = guid.
build display url.
CONCATENATE runtime->page_url '/' guid '.pdf' INTO
display_url.
Put New Object in the ICM Server Clipboard (ICM)
cl_http_server=>server_cache_upload( url = display_url
response = cached_response ).
ENDIF.
Thanks, Troy -
Converting Base64Binary to PDF document in BSP
Hello SDN users,
I am trying to get and display a pdf document from a webservice which is provided as a base64binary.
The interface of the webservice tells me that the response type (the actual pdf document) is an xsd:base64Binary.
The webservice proxy class generates an RAWSTRING for the pdf document as the response from the webservice call.
So my first guess was to use following class method to convert the base64binary to a normal string
CALL METHOD cl_http_utility=>if_http_utility~decode_base64
EXPORTING
encoded = lv_out_char " RAWSTRING from webservice
RECEIVING
decoded = lv_out_char_decoded.
My second guess was to create an xstring from this converted string via
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = lv_out_char_decoded"
mimetype = 'APPLICATION/PDF'
IMPORTING
buffer = lv_out_charx.
My next assumption was to create otf-data via function module so that I can send the otf data to the http server cache.
lv_pdf_len = XSTRLEN( lv_out_charx ).
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = lv_pdf_len
bin_file = lv_out_charx
TABLES
OTF = LT_OUTPUT_DATA-OTFDATA
LINES = LT_LINES
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
others = 5.
My Problem is, that I get back error code 4 which means bad otf.
Does anyone has a hint how I need to convert the base64binary from the webservice to a right format?
That would be great!Hello Durairaj,
thank you very much for your answer,
is it usual that the method
CALL METHOD cl_http_utility=>if_http_utility~decode_base64
EXPORTING
encoded = lv_out_char " RAWSTRING from webservice
RECEIVING
decoded = lv_out_char_decoded.
returns a string containg something like %pdf...? This was not the case with my method call.
But on friday I found out why. the string I received from the webservice was actually an XSTRING which I found out during a debugging session. The method return parameter was declared as RAWSTRING so I assumed that I had to convert from Base64 to STRING and then to XSTRING. When I aborted all the converting routines
if_http_utility~decode_base64
and
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
and passed the XSTRING to the ICM server cache I received the pdf I wanted.
But anyway If you could confirm my second question how a a decoded Base64 attribute should look like I would be very happy.
Regards,
Sebastian -
SAP R/3 Installation : Dispatcher not starting up.
Hi,
I'm trying to Install SAP R/3 Enterprise ABAP on Windows: Oracle. Central Instance, Database Instance & Gateway Instance Installation went smoothly without any problems.
But when I tried to start the SAP system the Dispatcher is not starting.
I'm getting following error which is listed below from various files like dev_wx, dev_ms, stderrx & dev_rfc.
<u><b>dev_rfc.trc file</b></u>
>TS> Fri Jun 03 14:02:41 2005
T:5268 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.C01, GWHOST=wipro, GWSERV=3300
ERROR partner not reached (host 10.119.2.66, service 3300)
TIME Fri Jun 03 14:02:41 2005
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
<u><b>dev_ms file</b></u>
[Thr 5884] Fri Jun 03 17:51:27 2005
[Thr 5884] systemid 560 (PC with Windows NT)
[Thr 5884] relno 6400
[Thr 5884] patchlevel 0
[Thr 5884] patchno 12
[Thr 5884] intno 20020600
[Thr 5884] pid 5816
[Thr 5884] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5816) [msxxserv.c 1655]
[Thr 5884] MsHttpInit: full qualified hostname = wipro.hobbits
[Thr 5884] HTTP logging is switch off
[Thr 5884] set HTTP state to LISTEN
[Thr 5884] MsHttpOwnDomain: own domain[1] = hobbits
[Thr 5884] *** I listen to port sapmsC01 (3601) ***
[Thr 5884] *** HTTP port 8101 state LISTEN ***
[Thr 5884] CUSTOMER KEY: >P1811225457<
[Thr 5884] Fri Jun 03 17:51:47 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:44 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_01 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:49 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 5884] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9101]
[Thr 5884] *** ERROR => MsSClientHandle: MsSRead C2 (wipro_C01_00), MSEINTERN [msxxserv.c 3765]
[Thr 5884] Fri Jun 03 18:03:09 2005
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C1 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C0 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
<u><b>stderr file</b></u>
<u><b>stderr2 file</b></u>
C:\usr\sap\C01\D00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\C01\D00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo startup 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo exit 1>>v9start.sql
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Jun 3 17:51:27 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01081: cannot start already-running ORACLE - shut it down first
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
<u><b>stderr4</b></u>
work process W0 died => tskh_init: db_connect
work process W3 died => tskh_init: db_connect
work process W4 died => tskh_init: db_connect
work process W5 died => tskh_init: db_connect
work process W6 died => tskh_init: db_connect
work process W7 died => tskh_init: db_connect
work process W2 died => tskh_init: db_connect
work process W1 died => tskh_init: db_connect
ICM up and operational (pid: 4100) ***
Shutdown ICM server ......
ICM shutdown completed (pid: 4100) ***
DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
<u><b>stderr6</b></u>
[Thr 3668] Fri Jun 03 17:51:27 2005
[Thr 3668] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3668] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 4144] Fri Jun 03 17:51:28 2005
[Thr 4144] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 4144] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 3680] Fri Jun 03 17:51:28 2005
[Thr 3680] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3680] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604]
From the above log, it says that there is problem in database connection. But I am not able to figure out where the problem lies & what are the changes that needs to be done.
Kindly suggest me what needs to be done.
Cheers,
JeetuHi Jeetendra
I have the same problem of dsipatcher not starting up, i am using XP as operating system , pinning hope that u have got the solutions for the problem
Here are the below
1)dev_wo
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Oct 19 09:23:41 2005
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:42 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3660
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3660) [dpxxdisp.c 1016]
I
I Wed Oct 19 09:23:43 2005
I MtxInit: -2 0 0
X
X Wed Oct 19 09:23:44 2005
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Oct 19 09:23:50 2005
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:55 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_PRD_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Oct 19 09:23:55 2005
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3660) [dpnttool.c 345]
2)stder
C:\usr\sap\PRD\DVEBMGS00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo startup 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo exit 1>>v9start.sql
'sqlplus' is not recognized as an internal or external command,
operable program or batch file.
3)dev_rfc
ERROR file opened at 20060207 010848 India Standard , SAP-REL 620,0,252 RFC-VER 3 500897 MT-SL
T:2608 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1360
T:2608 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4)dev_ms
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 2316] Wed Oct 19 09:23:36 2005
[Thr 2316] MsSSetTrcLog: trc logging not active
[Thr 2316] relno 6200
[Thr 2316] patchlevel 0
[Thr 2316] patchno 125
[Thr 2316] intno 20020600
[Thr 2316] pid 2328
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2328) [msxxserv.c 1515]
[Thr 2316] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 2316] *** I listen to port sapmsPRD (3600) ***
[Thr 2316] *** HTTP LISTEN ***
[Thr 2316] *** I listen to HTTP port 8100 ***
[Thr 2316] CUSTOMER KEY: >B0642345523<
[Thr 2316] Wed Oct 19 09:24:27 2005
[Thr 2316] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sap_PRD_00 [msxxserv.c 3957]
[Thr 2492] Wed Oct 19 09:27:02 2005
[Thr 2492] MsSExit: received SIGINT (2)
[Thr 2492] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2328) [msxxserv.c 4786]
5) dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Wed Oct 19 09:23:38 2005
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 2120
***LOG Q00=> DpSapEnvInit, DPStart (00 2120) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 268 MB
<ES> 267 blocks reserved for free list.
ES initialized.
Wed Oct 19 09:23:39 2005
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 8832]
Wed Oct 19 09:23:40 2005
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Wed Oct 19 09:23:42 2005
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Wed Oct 19 09:24:21 2005
ERROR => W0 (pid 3660) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3728) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3716) died [dpxxdisp.c 11210]
ERROR => W3 (pid 4048) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3704) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3700) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3684) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3692) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3896) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3672) died [dpxxdisp.c 11210]
ERROR => W10 (pid 2620) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3628) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3620) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3612) died [dpxxdisp.c 11210]
ERROR => W15 (pid 380) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3624) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Wed Oct 19 09:24:27 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
Wed Oct 19 09:24:28 2005
***LOG Q05=> DpHalt, DPStop ( 2120) [dpxxdisp.c 7637]
kindly help me to solve and able to connect to server
and please let me know step by step solutions as i am very much new
Thanking you my emial id ([email protected]) -
How to Integrate SAP R/3 ECC 6.0 with XI3.0 or PI7.0
Hi,
I am having access to one SAP R/3 ECC 6.0 server through internet.
I have stand alone SAP Net weaver PI 7.0 installed on my laptop.I do not know how to integrate both ,I mean to say that what are the steps I need to follow so that two systems can talk to each other.
Appreciate your details.
Thanks and Regards,
ViswanathHi,
It will be possible to do all the configurations related to RFC destination and partner profile as the experties have mentioned in above posts.
You need to also check with the way you could be able to access the SAP R/3 ECC 6.0 server through internet.
When you establish a connection to a client through a destination, the HTTP connection must first be entered in transaction SM59.
There are two types of HTTP connection in transaction SM59: Call transaction SM59 to display the different RFC destinations.
The HTTP connection to the external server (connection type G) and the HTTP connection to the R/3 system (connection type H) are different only in their logon procedures. Their technical settings are the same. To display the technical settings, double-click a connection.
You can choose from three tabs. Under Technical Settings, you can specify the following:
· Target Host: The host to which you want to connect.
Note that if you are using HTTPS as a protocol, you have to specify the full host name (with domain).
· Service No.: Here, you specify the port. The destination host must of course be configured in such a way that the specified port understands the corresponding protocol (HTTP or HTTPS). See Parameterizing the ICM and the ICM Server Cache.
· Path Prefix: At the time when the connection to this destination is initiated, the system inserts this sub-path before ~request_uri.
· HTTP Proxy Options: Here, you can configure a proxy for HTTP connections: You can determine the proxy host and service, as well as users and passwords for the HTTP connection.
The tab page Logon/Security will be different depending on whether you have selected a HTTP connection to an external server (connection type G) or a HTTP connection to an R/3 system (connection type H).
HTTP Connection to an External Server (Connection Type G)
Choose the connection you want to use. You can choose from the following logon procedures:
· No Logon: The server program does not request a user or password.
· Basic Authentication: The server program requests a user and password. Basic Authentication is a standard HTTP method for authenticating users. When a user logs on to the target system, he or she provides a user ID and password as authentication. This information is then sent in a header variable as a Base 64-encoded string to the server, through the HTTP connection.
· SSL Client Certificate: If you use client certificates for authentication, the client authentication is performed through the Secure Sockets Layer (SSL) protocol. In this case, you must also select the SSL Client PSE of the SAP Web AS that contains the relevant certificate for the authentication. The target system must handle the issuer of the SAP Web AS client certificate as a trusted system.
Under Logon/Security, you can also activate SSL to ensure that HTTPS is the protocol used (if you select SSL, make sure that the correct port is entered under Technical Settings). In the security transaction STRUST you can determine which type of SSL client is used. (Getting Started with the Trust Manager, Trust Manager).
The field Authorization for Destination has been implemented as an additional level of protection. We recommend that you specify a user and password for the RFC destination.
Thanks
Swarup
Maybe you are looking for
-
Love full screen view, but my file information and data are showing along the footer. How do I change me settings so this doesn't show? Thanks!!!!
-
Order of display in Org chart for ESS
Hello, Is there any way to change the order of display of org chart based on per.No. Thanks, Abdul
-
Hi,How to trace line item number in SHC
Hi friends, I would like to know from where this line item number in SHC comes? Wether we need to do any settings or it is system generated? In my case this is jumping like if one item in SHC is having line item number 1 then next one is coming like
-
Message mapping tab works fine ,runtime exception
Hi , Need some advice... I get a runtime messge mapping error ( system error) failing the substring logic although when i download the same payload and run in test tab it works fine. Has anyone encountered similar issue ? Thank you.
-
Alert for VM CPU percentage remain "Not activated"
We created an alert rule for the CPU percentage of a VM with a low threshold (10%) for testing. The threshold was exceeded for several minutes - longer than the alert evaluation window. The rule was enabled, of course. However, there was neither an e