ICM settings wrong after migration

I did a Consolidate Migration of iPrint from Netware 6.5 SP8 to OES11 SP2, in preparation of Transfer ID migration, as recommended by TID7004109. Out of 117 printers, 8 failed to migrate. This is not a very big deal, I could re-create them manually on the new print manager. These were the printers where the printer object name did not match agent name - sometime in the past I had renamed the printer agent to force re-install of printers on workstations.
The bigger problem is that iPrint Client Management Settings are totally wrong. I've done some spot checks, and there are lots of cases where container OU=DepartmentX,O=Company has ICM settings with printers that belong to DepartmentY and DepartmentZ. I've looked at the migration log (/var/opt/novell/migration/MyProject/log/iprint.log) but I can't find anything regarding migration of ICM settings in the log.
Also it seems that some printers have ACL entries missing. My first impression is that ACL entries that are groups and users migrated successfully, but those that are containers did not...
Looks like I'll have to go through all the settings and verify them manually, unless someone can recommend a better approach? Fortunately the new server is still in pre-migration state, so there is an option to re-do it from scratch, if only I knew what to do differently next time.

vatson,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

Problems with new iMac (Alu) after Migration with the Bluetooth settings

Hallo, at first, apology for my bad English
I have bought a new iMac 24". After Migration of my datas from my "old" one (iMac 20" C2D) it works all very fine. The only thing that don´t work is the Bluetooth Settings. When i want to install a new device, there is no text in the Window, only a few characters...
Can anyone help me??

Try downloading and installing the 10.4.10 Combo update. Let the update run alone. Don't use the Mac for anything else while it installs the update, including Airport and Bluetooth. Use a wired keyboard and mouse if you can.
Mac OS X 10.4.10 Combo Update v1.1 (Intel)
Repair Disk Permissions after the update is installed and you have restarted the Mac.

Application is not working after migrated to 11.1.2.4

Hi expterts,
I developed an adf application on JDeveloper 11.1.1.6. It works without problem on 11.1.1.6.
Briefly uses following technologies: ADF faces, facelets and taskflows, EJB, hibernate...
When i wanted to go on develop with 11.1.2.4, I copied my App root folder to another folder. And chosed .jws application file from 11.1.2.4 version. Then IDE wants me to confirm about migration, then i accepted.
I develop a supplierList structure for feeding the select one choice components' selectItems. These provide load the db objects on the first calling and manages by my ListManager class.
These supplier classes initialize on the MBean init method. MBean init method calls on taskflow initializer. The project (VCUtil) that includes Supplier classes is on my main ViewController project as ADFLibrary.
But after migration when i deploy the application on my Integrated weblogic Server. oops does'nt seen my jspx screens properly on first attempt which includes supplier classes. But when i refresh the screen it can be loaded properly.
The log contains only that line:
<20-Sep-2013 10:33:31 o'clock EEST> <Notice> <Stdout> <BEA-000000> <10:33:31,189 DEBUG [PerformanceMonitor_lsr6sq_Impl] Method public java.util.Collection com.acme.model.domain.ad.sessionbean.ADManagerBean.findCurrencies() took 167 (ms)>
<20-Sep-2013 10:33:31 o'clock EEST> <Info> <ServletContext-/RestAutomation> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:oracle.adf.controller.activity.ActivityLogicException: ADFC-06015: An exception occured when invoking a task flow initializer.>
My first supplier class is CurrencySupplier, and i can see acc.to the log it works, the second one is DepartmentSupplier class. So i expect log stdout about findDepartments() method too. But nothing, i guess when executing on CurrencySupplier there might be a wrong, that's why can not go on. But when i refresh the page at that time executes the DepartmentSupplier class. If i refresh page for Supplier class count times then page loads.
    public void init()
        try
            if (ObjectUtil.isNull(currencySupplier = (CurrencySupplier)ListManager.getInstance().getSupplier("currencies")))
                currencySupplier = new CurrencySupplier();
            if (ObjectUtil.isNull(departmentSupplier = (DepartmentSupplier)ListManager.getInstance().getSupplier("departments")))
                departmentSupplier = new DepartmentSupplier(false);
            if (ObjectUtil.isNull(countrySupplier = (CountrySupplier)ListManager.getInstance().getSupplier("countries")))
                countrySupplier = new CountrySupplier();
            if (ObjectUtil.isNull(cityForCountrySupplier = (CityForCountrySupplier)ListManager.getInstance().getSupplier("citiesforcountry")))
                cityForCountrySupplier = new CityForCountrySupplier(false, null);
            else
                cityForCountrySupplier.refreshList(null);
            if (ObjectUtil.isNull(districtForCitySupplier = (DistrictForCitySupplier)ListManager.getInstance().getSupplier("districtsforcountry")))
                districtForCitySupplier = new DistrictForCitySupplier(false, null);
            else
                districtForCitySupplier.refreshList(null);
public class CurrencySupplier extends SimpleListSupplier
    public CurrencySupplier(boolean blankItemApplied)
        super(blankItemApplied);
    public CurrencySupplier()
        super();
    @Override
    public void loadList()
        try
            UtilBean utilBean = new UtilBean();
            clearList();
            list.addAll(utilBean.findCurrencies());
            Collections.sort(list);
            itemList.addAll(ConversionUtil.getConvertedToSelectItemList(list, isBlankItemApplied()));
        catch (Exception exc)
            exc.printStackTrace();
    public String getListName()
        return "currencies";
I hope that i could explain the problem
Thx, bgrds

Are there missing / invalid entries in Settings >> General >> About ?

ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!

Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
users works fine. The only thing I have trouble with is the ActiveSync! After migrating to the new Ex2013 server my phone stops getting new emails…, existing Ex2007 users don’t have any problems with their mobile phones.
I did ActiveSync test for my user account with ActiveSync Tester and here is what I have:
As you can see from the error above ActiveSync Tester detects ActiveSync on Ex2013 server however something wrong there with form-based auth?! I can’t see any differences in settings for ActiveSync virtual folders in Ex2007 and Ex2013
virtual folders?!
What I’m missing here?! Please help.

Check if the Exchange Servers group does not have the appropriate permission to the mailbox object in Active Directory.
To check whether inheritance is disabled on the user:
1.Open Active Directory Users and Computers.
2.On the menu at the top of the console, click View > Advanced Features.
3.Locate and right-click the mailbox account in the console, and then click Properties.
4.Click the Security tab.
5.Click Advanced.
6.Make sure that the check box for "Include inheritable permissions from this object's parent" is selected.
Ref:
http://technet.microsoft.com/en-us/library/dd439375(v=exchg.80).aspx
Also check the Virtual directory authentication
Microsoft-Server-ActiveSync
•Basic authentication
•SSL required
•Requires 128-bit encryption
Ref:
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Check the IIS log if you are able to find any error message on it
Exchange Queries

Profile Manager Broken after Migration to OS X Server 10.8

After migrating from Lion Server to OS X Server 10.8, Profile Manager will not start. Server.app -> Profile Manager reports "Error Reading Settings". Apache Error log reports:
[Thu Aug 30 13:32:29 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Thu Aug 30 13:32:29 2012] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
I tried shutting down all web services (Profile Manager, Wiki, Web), ran "serveradmin command web:command=restoreFactorySettings", then turned back on Web and Profile Manger... same problem.
Any ideas what, exactly, is wrong and how to fix it?

this might not be true in your case but when I've seen "error reading setting"it has been a permission problem on the Library/Server/profilemanager folder (or other service)
Profile manager should have owner _devicemgr RW, group _devicemgr R, everyone R
same for the Data folder inside.
Might be forth checking

After migrating, -1202 errors and App Store/Update doesn't work

After migrating my 2008 MacBook Air to an MacBook Air media 2012, everything went wrong. Biggest problems: no synchronisation with mail and -1202 in iTunes and an endless spinning wheel in the App Store and Software update. Thrown my prefs away already. It has something to do with accounts and keychain I think, but can't find it...

SKAshanchi wrote:
From this article:
http://support.apple.com/kb/HT5883?viewlocale=en_US&locale=en_US
Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
I don't have any restrictions set on my phone at all.

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries?

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.

If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.

The value returned from the load function is not of type numeric errors after migration to Coldfusion 11

I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?

This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">

<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>


<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>

<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>

<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
   this.sCountryName = "";
   this.sISOCode = "";
   this.sDHLCode = "";
   this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>


<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     if(isDefined("session.afr")){
      whichOne = "#session.afr.getsAFRNumber()#";
     } else {
      whichOne = "";
     iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
    </cfscript>
   <cfset this.iErrorID = iErrorID>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="get" datasource="#sDatasource#">
    SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: get: #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>

<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>

<cfif not checkID.recordCount>
   <cfreturn this.add()>
<cfelse>
   <cfreturn this.update()>
</cfif>
</cffunction>

<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>
<cftry>
   <cfquery name="add" datasource="#sDatasource#">
    SET nocount on
    INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
    VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
    SELECT @@identity as autoID
    SET nocount off
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: add: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>

<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
    AND idCountryID <> #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="update" datasource="#sDatasource#">
    UPDATE tblCountry
    SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
    sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
    sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: update: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>

<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="checkDependancies" datasource="#sDatasource#">
    SELECT idCountry
    FROM tblAddress
    WHERE idCountry = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("That Country is being used by an address, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="delete" datasource="#sDatasource#">
    DELETE FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent>

Problem with national fonts after migration 9i- 10g

I'm after migration from Developer Suite 9i to 10g. I see that all Polish characters are replaced with '?'. This problem is only in 10g Designer (before migration all were OK).
I've tried setting NATLNG to POLISH_POLAND.EE8MSWIN1250 in Forms Generator. In Windows registry is POLISH_POLAND.EE8MSWIN1250 (setting by DS10g setup).
I've tried fonts via Options->Color/Font/Style - I see change on Display view but '?' are still after saving changes and generating form.

Thanks knordstrand.
Problem's resolved yet. You're right - wrong charset on bd.
Close topic

NPE for textField text after migration from ea2 to final release , help....

I migrate an application from JSC2 EA2 to JSC2 final release
In one of my page (first page that i check after migration) I have some text field.
In a button action i used those textfields Text for some processing.
Now after i press submit key (whether text boxes are full or empty) i get null pointer exception when i try to access the textfields text
by using getTextField1().getText().toString()
can any one say where i have mistaken in my migration plane ?
Thanks

Hi,
Suggest to replace all butttons using FCS version.
There was some change from EA to FCS for buttons.
e.g. if you have multiple buttons on a Page that was created using EA
then the wrong action handler will get called
hth
John

2 Problems after migration Project Server 2007 to 2010

Hi Everyone!!
I have 2 issues after migrate MS Project Server 2007 to Project Server 2010, in fact i had a lot issues, but i can solve almost all, so after solve all issues, just is pendings 2 issues very rare:
Backgrounds:
Migrated from: Windows Server 2008R2 - SQL Server 2008 R2 - Proejct Server 2007 with WSS 3.0 - All updates are up to date (CU is up to date) and all platform is ok
To: Windows Server 2008R2 - SQL Server 2008 R2 - Project Server 2010 SP2 - SharePoint Server 2010 SP2 - All updates are up to date (CU is up to date) and all platform is ok
3 Servers in the Farm, ----> 1WFE-1WAPP-1DB
Issues:
In the Project Center, some migrate Project don't show the icon with image about project documents, risk and issues although that project effectively have documents , risk and issues
In "Server Settings" , in section "Operational Policies" in "Project Sites" almost all projects don't show the URL with Project Site
For the issues 1 and 2, i tried some things:
Re publish all projects (approx 700 projects) with a script via PowerShell available in technet
Run the Wizard Again
Rebuild Solution
Restart the all Servers in the Farm
Restart Services ----> IIS - Project EventService - ProjectQueue - SharePoint Timer
and i can't solve it yet!!!
Please Any Ideas?
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

Have you restored content DB successfully?
for point 2 have you performed:
have you synchronized project site under server setting --> operational policies --> Bulk Update Project
Sites
http://pwmather.wordpress.com/2012/10/08/projectserver-2010-bulk-update-project-site-issue-ps2010-msproject-sp2010-sharepoint/
after doing this publish all the project which are having issue it may solve your 1st issue.
You can check if below condition is applies to you (PWA 2007)
You may need to use the WSS site re-linker tool –
now built in to Server Settings in PWA as “Bulk Update Project Sites”. If you have changed URL die to a different port then re-linking should get your sites in order. In upgrade scenarios the “Previous Site Path” Web application might show as a GUID
in the drop down – however it still works and will re-link the sites.
http://technet.microsoft.com/en-us/library/cc197498(v=office.12).aspx
kirtesh

Severe Time Drifting after Migration from 10.5.8 - Help!

Hey everyone, I'm hoping someone can help me out or shed some light on a very odd issue that came about this morning. I'm really having a hard time figuring out a fix.
I recently upgraded one of my old Mac mini servers to some new, (to me), hardware. The old server was a last-gen G4, and the new one is a late 2006 Intel.
The migration went totally fine, and all services are responding and working as expected. This server really isn't used for all that much, so I didn't anticipate any real issues in upgrading from 10.5.8 (PPC) to 10.6.7 (Intel). But after checking everything over this afternoon, I landed on a really weird issue.
I can literally watch the time progress slower on this server. Really. The seconds pass slower, and after about an hour, it will be up to five minutes behind all the other servers in my infrastruture. The server is setup to watch time.apple.com as it's NTP, and there's no change with another NTP server. I can grep the NTPd and it seems to be working fine. I've "started fresh" by removing ntp.conf and ntp.drift, rebooted, and had NTPd recreate them after setting new time and date preferences. That seems to have helped a *bit* but it's still persisting. Time zone information is correct. I've even turned off time sync altogether and it still persists, so it's got to be a local issue with the system.
Now, after some pondering, I believe I know what's causing the issue. The person I inherited the server from replaced the stock 1.5 Core Solo with a 1.66 Core Duo, which I've seen done plenty of times before, and never heard any real issues with. And I did physically check the upgrade, and everything seems to be perfect. The system sees both cores fine, and everything is stable. Except this very odd time/clock issue. This is the only root cause that I can possibly think of for it doing this.
And what's odd, is that if the time is wrong in the menu bar, and I go into the Time and Date prefpane, it instantly updates to the right time.
Now really, this isn't *that* big of a deal for this server. None of it's services rely on perfect time, (Kerberos and whatnot), but it's still rather annoying, especially for Time Machine backups. My main curiousity is if anyone knows how to increase the interval for NTP syncing with time.apple.com, so it'll check every hour or so, (I believe it checks every 12 by default. Correct me if I'm wrong).
TL;DR
After migrating from Leopard Server (PPC) to Snow Leopard Server (Intel), my system clock is running about five minutes slow per hour. Suspecting processor upgrade is to blame. How can I increase NTP syncing interval with time.apple.com?
Thanks in advance everyone!

You can add/modify the minpoll and maxpoll values in ntp.conf. This should allow you to set the time poll and reset a bit more aggressively.
The Xeon chips have been notorious for time skew. I've not seen the same with CoreDuo and Core2Duo.
You may also just want to periodically stop and start the NTP process. This can be down using systemsetup command: systemsetup -setusingnetworktime on/off
In corporate environments with Windows time servers that reboot frequently, I tend to automate a script that stops network time, waits a few seconds, and then starts it again. This will force a sync.
Hope this helps. Oh, and by the way, time is critically importation to Kerberos authentication and authorization from the client. Next the DNS, time is the most common cause of access denial. Keep DNS and time healthy.

Outlook prompts creds after migration, unless new windows profile created

HI!
Outlook keeps prompting credentials after migration for some users. When we create new windows profile for this user, all going well. Autodiscover in browser also keeps prompting for password.
I checked credential manager (there are no passwords stored), also tried new outlook profile (no help).
Any ideas?

2010 SP2 migrated to 2010 SP3. We already tried changing authentications. The problem occurs for random users (not all users). Auth settings on autodiscover virtual directory: Anonymous, Windows, Basic. Auth on exchange (get-autodiscovervirtualdirectory):
Basic, NTLM, WindowsINtegrated.
Also i did not mention early - the problem obviously with autodiscover. I can't get autodiscover.xml using browser (keeps prompting for credentials). From another winows profile on the same computer with the same mailbox all going well. So I don't understand
where should I look to.

Problem with Java Native Type after Migration from 7.0 to 7.1

Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
Peter

Hi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter

Check Stored Procedures after Migration from MS SQL Server 2008 to Oracle11

I successfully migrated my application database (azteca) from MS SQL Server 2008 to Oracle 11g R2. After migration, I found there are few stored procedures are not valid. How do I check these invalid stored procedures and find what is wrong with them by using SQL Developer? Thanks for your help.
Kevin

Hi Kevin,
You posted quite a bit today, so perhaps you have already worked this out. If not...
1. View -> Reports -> Data Dictionary Reports -> All Objects -> Invalid Objects [for a specific schema name]
2. Next, for each invalid stored procedure listed in (1)...
a. Open in the code editor from the Connections navigator tree
b. Click on the Compile icon (two gears meshed together) in code editor tool bar.
c. Look in the Compiler log pane for errors.
d. Correct the errorsOf course, success in addressing any errors depends on your skill level dealing with Oracle PL/SQL.
Also, it may be helpful to read over section *3.2 Stored Procedures* in the supplementary migration guide:
http://docs.oracle.com/cd/E35137_01/doc.32/e18462/trig_stored_proc.htm#CHDEIGBC
Regards,
Gary
SQL Developer Team

ICM settings wrong after migration

Similar Messages

Maybe you are looking for