ICMAN is not active

Hello,
There is a strange problem in my ECC5.0 system. When I enter SICF and try to test one of the services (no matter what) I get error: "ICMAN not active"
icman service is active, I've tried to restart it but I still got the error I mentioned above.
Any ideas ?
Please Advice,
Dimitry Haritonov

Hello Dimitry,
can you please check wether the parameter:
rdisp/start_icman = true
has been set up?
If yes: go to Tr. SMICM -> GOTO -> SERVICES
are the HTTP (and eventually HTTPS) services active?
Regards,
Dezso

Similar Messages

In SICF, ICMAN not active

Hi All,
In SMICM, ICM Status is showing as Running. When we test the ICMAN service in SICF is gives an error "ICMAN NOT ACTIVE".
Instance Profile Parameters ( RZ10) for icm are as follows :
rdisp/start_icman                           true
icm/max_conn                                700
icm/HTTP/j2ee_0                             PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/max_threads                             100
icm/plugin_0                                PROT=HTTP,PLG=D:\usr\sap\cc5\SYS\exe\run\httpplugin.dll
icm/min_threads                             50
icm/server_port_2                           PROT=SMTP, PORT=1025
icm/server_port_1                           PROT=HTTPS, PORT=1443
icm/server_port_0                           PROT=HTTP,PORT=1080
Following are the errors showing in trace file dev_icm :
[Thr 11912] *** ERROR => NiPBind: bind failed (socket=131160) (0: No error) [ninti.c      942]
[Thr 11912] *** ERROR => NiIBind: service '1080' (1080) in use [nixxi_r.cpp 3860]
[Thr 11912] *** ERROR => NiIListen: NiBind (rc=-4) [nixxi_r.cpp 767]
[Thr 11912] *** ERROR => IcmBindService: NiBuf2Listen failed for host dlwsdv11:1080 (rc=-4): NIESERV_USED [icxxserv.c   1549]
[Thr 11912] ISC: created 400 MB disk cache.
[Thr 11912] ISC: created 50 MB memory cache.
[Thr 11912] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
[Thr 11912] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=1, flags=4101) for /:0
[Thr 11912] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=2, flags=1077253) for /:0
[Thr 11912] =================================================
[Thr 11912] = SSL Initialization on PC with Windows NT
[Thr 11912] =   (640_REL,Jul 16 2006,mt,ascii,SAP_UC/size_t/void* = 16/32/32)
[Thr 11912]   SapISSLComposeFilename(): profile param "ssl/ssl_lib" = "D:\usr\sap\CC5\SYS\exe\run/libsapcrypto.so"
           resulting Filename = "D:\usr\sap\CC5\SYS\exe\run/libsapcrypto.so"
[Thr 11912] *** ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\CC5\SYS\exe\run\libsapcrypto.so) Error 126 [dlnt.c       237]
[Thr 11912]         Error 126 = "The specified module could not be found."
[Thr 11912] *** ERROR => secudessl_LoadLibrary(): Unable to load "D:\usr\sap\CC5\SYS\exe\run\libsapcrypto.so" [ssslsecu.c   352]
[Thr 11912] *** ERROR => Loading of SSL library failed -- NO SSL available!
[Thr 11912] =================================================
[Thr 11912] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
[Thr 11912] *** ERROR => IcmAddService: SapSSLInit (rc=-1): SSSLERR_LIB_NOT_FOUND [icxxserv.c   348]
[Thr 11912] Sat Jul 26 10:52:05 2008
[Thr 11912] Started service 1025 for protocol SMTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeou
[Thr 10492] IcmJ2EEScheduleFunc: WARNING: no HTTP and HTTPS service defined - URL Prefix Table not loaded from server
[Thr 11912] Sat Jul 26 10:52:14 2008
[Thr 11912] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 9 seconds [icxxtool.c   1065]
[Thr 11912] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c
[Thr 10188] Sat Jul 26 10:53:50 2008
[Thr 10188] MPI<3>0#4 Peak buffer usage: 2 (@ 64 KB)
Please guide me on this.
Appreciate your help.
Thanks,
Chandravadan

Hi
Check for HTTP/HTTPS service status:
go to transaction SMICM
SMICM->goto->services
do you see HTTP protocol is maintained and active?
Also check this link for various ICMAN related issues
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm

Error : ICMAN not Active

When i try to test a HTTP service it says ICMAN not Active. I am trying to upload a photo of an employee, thru transaction OAAD it says 'HTTP Plugin not Active'

Hi, Test your content repository server using TC - SICF also check its up and running using TC: CSADMIN.
(you might require basis help for this)

ICMAN not Active error in SICF

Hi All,
I am working with Consuming Webservices. I am working on ECC 5.0 system.
In SICF when I have activated following services :
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
But when I am testing any of the services I am getting an Error message "ICMAN not ACTIVE" in SICF.
This happens even after /default_host/sap/public/icman is activated using context menu 'Activate service'.
Please guide me in this.
Thanks & Regards,
Ankur

check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm
if problem still persist, do get back.
Regards
Raja

Dispatcher not active

Hi Experts,
Please check this Developer Trace of Dispatcher, this is stopped, when I am restarting my server, it is giving errors :
running but not connected to message server,
and
running but dialog queue standstill, J2EE service unavilable.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        XID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    52
intno      20050900
make:      multithreaded, Unicode, optimized
pid        1412
Fri Sep 21 10:19:59 2007
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 1412) [dpxxdisp.c   1231]
     shared lib "dw_xml.dll" version 52 successfully loaded
     shared lib "dw_xtc.dll" version 52 successfully loaded
     shared lib "dw_stl.dll" version 52 successfully loaded
     shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Fri Sep 21 10:20:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >inggnh002sap_XID_01                     <
DpShMCreate: sizeof(wp_adm)          12672     (1408)
DpShMCreate: sizeof(tm_adm)          3954072     (19672)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1452)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06510040, size: 4607512)
DpShMCreate: allocated sys_adm at 06510040
DpShMCreate: allocated wp_adm at 06511E28
DpShMCreate: allocated tm_adm_list at 06514FA8
DpShMCreate: allocated tm_adm at 06514FD8
DpShMCreate: allocated wp_ca_adm at 068DA570
DpShMCreate: allocated appc_ca_adm at 068E0330
DpShMCreate: allocated comm_adm at 068E2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06963130
DpShMCreate: allocated gw_adm at 06963170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069631A0
DpShMCreate: allocated wall_adm at 069631A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1324
argv[0] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2009
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=XID
argv[7] = -DSAPMYNAME=inggnh002sap_XID_01
argv[8] = -DSAPPROFILE=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
Fri Sep 21 10:20:05 2007
***LOG Q0K=> DpMsAttach, mscon ( inggnh002sap) [dpxxdisp.c   11414]
DpStartStopMsg: send start message (myname is >inggnh002sap_XID_01                     <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Sep 21 10:20:06 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Fri Sep 21 10:20:41 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1492
     (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2014) [nixxi.cpp    4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1324)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Sep 21 10:20:45 2007
ERROR => W0 (pid 2804) died [dpxxdisp.c   14021]
ERROR => W1 (pid 1484) died [dpxxdisp.c   14021]
ERROR => W2 (pid 2708) died [dpxxdisp.c   14021]
ERROR => W3 (pid 1464) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 860) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 2964) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2508) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 3840) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 1072) died [dpxxdisp.c   14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:20:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Sep 21 04:50:55 2007
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2804 Ended         no      1   0             0
1 DIA     1484 Ended         no      1   0             0
2 DIA     2708 Ended         no      1   0             0
3 DIA     1464 Ended         no      1   0             0
4 UPD      860 Ended         no      1   0             0
5 ENQ     2964 Ended         no      1   0             0
6 BTC     2508 Ended         no      1   0             0
7 SPO     3840 Ended         no      1   0             0
8 UP2     1072 Ended         no      1   0             0
Dispatcher Queue Statistics               Fri Sep 21 04:50:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)
Dump of tm_adm structure:               Fri Sep 21 04:50:55 2007
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Sep 21 04:50:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >inggnh002sap_XID_01                     < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (776) (SOFT_KILL)
Stop icman
killing process (2780) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:776 HANDLE:1572)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:776 HANDLE:1572)
wait for end of icman
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2780 HANDLE:1576)
[DpProcDied] Process died (PID:1324 HANDLE:1556)
DpStartStopMsg: send stop message (myname is >inggnh002sap_XID_01                     <)
NiIMyHostName: hostname = 'inggnh002sap'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Sep 21 10:21:13 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11698]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1516 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1516 (pos=3)
SiSelNRemove: removed sock 1516
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1516
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1412) [dpxxdisp.c   10087]
Good Bye .....
Please Help, it is urgent,
Regards,
Study SAP

Hi Kaushal,
Thanks for your reply, there are many files with dev*.
Please check the log from file dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Sep 21 10:37:39 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno      01
M sid        XID
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3588
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3588) [dpxxdisp.c   1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Sep 21 10:37:40 2007
M DpShMCreate: sizeof(wp_adm)          12672     (1408)
M DpShMCreate: sizeof(tm_adm)          3954072     (19672)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1452)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06510040, size: 4607512)
M DpShMCreate: allocated sys_adm at 06510040
M DpShMCreate: allocated wp_adm at 06511E28
M DpShMCreate: allocated tm_adm_list at 06514FA8
M DpShMCreate: allocated tm_adm at 06514FD8
M DpShMCreate: allocated wp_ca_adm at 068DA570
M DpShMCreate: allocated appc_ca_adm at 068E0330
M DpShMCreate: allocated comm_adm at 068E2270
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06963130
M DpShMCreate: allocated gw_adm at 06963170
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 069631A0
M DpShMCreate: allocated wall_adm at 069631A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host inggnh002sap
M
M Fri Sep 21 10:37:41 2007
M calling db_connect ...
C Prepending D:\usr\sap\XID\DVEBMGS01\exe to Path.
C
C Fri Sep 21 10:37:47 2007
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06AAFCF8   06AB5294   06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:48 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06AAFCF8   06AB5294   06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:49 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10704]
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10019]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server inggnh002sap_XID_01 on host inggnh002sap (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Fri Sep 21 10:37:49 2007
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10204
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3588) [dpnttool.c   327]
Regards,
Study SAP

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Material ledger is not active in valuation area C002

Dear All,
I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
regds,
Kallu

Hi
For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
Why we need Material Ledger?
A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
valuations.
Material inventory values are normally carried by the SAP system in one currency. The material
ledger component enables the R/3 System to carry inventory values in two additional
currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
historical exchange rates directly at the time of posting. Businesses such as those in highinflation
countries can therefore carry their inventories in a more stable currency (such as US
dollars). This reveals inflationary effects on inventory values.
If you use transfer prices to represent value flows in your company in different
valuation views, you must use the material ledger. This allows you to carry your
inventories in three different valuations (legal valuation, valuation for reporting
purposes, and profit center valuation).
Before activating the material ledger, make sure you know which currencies and valuations
you want to use, because you cannot go back and change the setting.
Activating the material ledger is a prerequisite for using multiple valuations.
Thanks
Raman

Material ledger is not active in valuation area S001

Dear All,
I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
regds,
CB

Hi,
Please check your Material Ledger Activation setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked. After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation. If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box. I hope this step will resolve your issue.
Regards
appalas

NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
Help is much appreciated.
P.S. I have ADE version 2.0

Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below...
http://www.adobe.com/products/digitaleditions/help/
"After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
Good luck!

Material is not activated error in MM

Hi,
We'vs installed SAP IDES in our Landscape recently. Whenever I tried to create a new material using MM01 transaction code, it creates. But then when I tried to view the same in MM03 or MM02 it throws an error of the following,
The material XXXXX does not exist or is not activated
Message no. M3305
I'm unable to diagonis the problem properly. Will appreciate your help.
Thanks,
Rajesh Manoharan

>
Kishore Kumar Chiluka wrote:
> Hi
>
> Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
>
> Thanks & Regards
>
> Kishore
Thanks a lot Kishore.
But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
Can you help me in identifying a solution to this problem?
Thanks,
Rajesh Manoharan

Shrink database is not active in SQL SERVER Enterpriser manager

Dear guru
Shrink database is not active in SQL SERVER Enterpriser manager what to do
Rupesh
SAP BASIS Consultant

Hi,
>Thank you very much for not supporting i have solved the problem by reading some other documents
That's exactly what I wanted you to do : With a little personal work, you can actually learn to do your own work ! "Don't give fish to hungry people. Teach them how to go fishing !"
Regards,
Olivier

ICMAN is not active

Similar Messages

Maybe you are looking for