ICMAN not Active error in SICF

Hi All,
I am working with Consuming Webservices. I am working on ECC 5.0 system.
In SICF when I have activated following services :
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
But when I am testing any of the services I am getting an Error message "ICMAN not ACTIVE" in SICF.
This happens even after /default_host/sap/public/icman is activated using context menu 'Activate service'.
Please guide me in this.
Thanks & Regards,
Ankur

check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm
if problem still persist, do get back.
Regards
Raja

Similar Messages

In SICF, ICMAN not active

Hi All,
In SMICM, ICM Status is showing as Running. When we test the ICMAN service in SICF is gives an error "ICMAN NOT ACTIVE".
Instance Profile Parameters ( RZ10) for icm are as follows :
rdisp/start_icman                           true
icm/max_conn                                700
icm/HTTP/j2ee_0                             PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/max_threads                             100
icm/plugin_0                                PROT=HTTP,PLG=D:\usr\sap\cc5\SYS\exe\run\httpplugin.dll
icm/min_threads                             50
icm/server_port_2                           PROT=SMTP, PORT=1025
icm/server_port_1                           PROT=HTTPS, PORT=1443
icm/server_port_0                           PROT=HTTP,PORT=1080
Following are the errors showing in trace file dev_icm :
[Thr 11912] *** ERROR => NiPBind: bind failed (socket=131160) (0: No error) [ninti.c      942]
[Thr 11912] *** ERROR => NiIBind: service '1080' (1080) in use [nixxi_r.cpp 3860]
[Thr 11912] *** ERROR => NiIListen: NiBind (rc=-4) [nixxi_r.cpp 767]
[Thr 11912] *** ERROR => IcmBindService: NiBuf2Listen failed for host dlwsdv11:1080 (rc=-4): NIESERV_USED [icxxserv.c   1549]
[Thr 11912] ISC: created 400 MB disk cache.
[Thr 11912] ISC: created 50 MB memory cache.
[Thr 11912] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
[Thr 11912] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=1, flags=4101) for /:0
[Thr 11912] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=2, flags=1077253) for /:0
[Thr 11912] =================================================
[Thr 11912] = SSL Initialization on PC with Windows NT
[Thr 11912] =   (640_REL,Jul 16 2006,mt,ascii,SAP_UC/size_t/void* = 16/32/32)
[Thr 11912]   SapISSLComposeFilename(): profile param "ssl/ssl_lib" = "D:\usr\sap\CC5\SYS\exe\run/libsapcrypto.so"
           resulting Filename = "D:\usr\sap\CC5\SYS\exe\run/libsapcrypto.so"
[Thr 11912] *** ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\CC5\SYS\exe\run\libsapcrypto.so) Error 126 [dlnt.c       237]
[Thr 11912]         Error 126 = "The specified module could not be found."
[Thr 11912] *** ERROR => secudessl_LoadLibrary(): Unable to load "D:\usr\sap\CC5\SYS\exe\run\libsapcrypto.so" [ssslsecu.c   352]
[Thr 11912] *** ERROR => Loading of SSL library failed -- NO SSL available!
[Thr 11912] =================================================
[Thr 11912] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
[Thr 11912] *** ERROR => IcmAddService: SapSSLInit (rc=-1): SSSLERR_LIB_NOT_FOUND [icxxserv.c   348]
[Thr 11912] Sat Jul 26 10:52:05 2008
[Thr 11912] Started service 1025 for protocol SMTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeou
[Thr 10492] IcmJ2EEScheduleFunc: WARNING: no HTTP and HTTPS service defined - URL Prefix Table not loaded from server
[Thr 11912] Sat Jul 26 10:52:14 2008
[Thr 11912] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 9 seconds [icxxtool.c   1065]
[Thr 11912] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c
[Thr 10188] Sat Jul 26 10:53:50 2008
[Thr 10188] MPI<3>0#4 Peak buffer usage: 2 (@ 64 KB)
Please guide me on this.
Appreciate your help.
Thanks,
Chandravadan

Hi
Check for HTTP/HTTPS service status:
go to transaction SMICM
SMICM->goto->services
do you see HTTP protocol is maintained and active?
Also check this link for various ICMAN related issues
http://help.sap.com/saphelp_nw04/helpdata/en/ba/435e096b42724bbcef709fd4c32a85/frameset.htm

Error : ICMAN not Active

When i try to test a HTTP service it says ICMAN not Active. I am trying to upload a photo of an employee, thru transaction OAAD it says 'HTTP Plugin not Active'

Hi, Test your content repository server using TC - SICF also check its up and running using TC: CSADMIN.
(you might require basis help for this)

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Material is not activated error in MM

Hi,
We'vs installed SAP IDES in our Landscape recently. Whenever I tried to create a new material using MM01 transaction code, it creates. But then when I tried to view the same in MM03 or MM02 it throws an error of the following,
The material XXXXX does not exist or is not activated
Message no. M3305
I'm unable to diagonis the problem properly. Will appreciate your help.
Thanks,
Rajesh Manoharan

>
Kishore Kumar Chiluka wrote:
> Hi
>
> Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
>
> Thanks & Regards
>
> Kishore
Thanks a lot Kishore.
But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
Can you help me in identifying a solution to this problem?
Thanks,
Rajesh Manoharan

XI 3.0 : java is not active error and dispacter is not working

Dear Experts..............
Pls help me in solving this...
the ..log file says..
XI01\saploc\XI1\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Apr 18 19:39:04 2006
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    43
intno      20020600
make:      multithreaded, ASCII
pid        2448
Tue Apr 18 19:39:05 2006
***LOG Q00=> DpSapEnvInit, DPStart (00 2448) [dpxxdisp.c   1100]
     shared lib "dw_xml.dll" version 43 successfully loaded
     shared lib "dw_xtc.dll" version 43 successfully loaded
     shared lib "dw_stl.dll" version 43 successfully loaded
     shared lib "dw_gui.dll" version 43 successfully loaded
Tue Apr 18 19:39:17 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0151.qqq.nxst) took 12 seconds
Tue Apr 18 19:39:22 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          6624     (828)
DpShMCreate: sizeof(tm_adm)          2219848     (11044)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          192000     (384)
DpShMCreate: sizeof(vmc_adm)          0     (320)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 039D0040, size: 2505416)
DpShMCreate: allocated sys_adm at 039D0040
DpShMCreate: allocated wp_adm at 039D17A8
DpShMCreate: allocated tm_adm_list at 039D3188
DpShMCreate: allocated tm_adm at 039D31B0
DpShMCreate: allocated wp_ca_adm at 03BF10F8
DpShMCreate: allocated appc_ca_adm at 03BF5748
DpShMCreate: allocated comm_adm_list at 03BF6EB8
DpShMCreate: allocated comm_adm at 03BF6ED0
DpShMCreate: allocated vmc_adm_list at 03C25CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 03C25CF8
DpShMCreate: allocated wall_adm at 03C25D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 594 blocks reserved for free list.
ES initialized.
Tue Apr 18 19:39:23 2006
J2EE server info
start = TRUE
state = STARTED
pid = 2736
argv[0] = C:\usr\sap\XI1\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\XI1\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\XI1\SYS\profile\XI1_DVEBMGS00_XI01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1062
argv[5] = -DLISTEN_PORT=1063
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=XI1
argv[8] = -DSAPMYNAME=XI01_XI1_00
argv[9] = -DSAPPROFILE=C:\usr\sap\XI1\SYS\profile\XI1_DVEBMGS00_XI01
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( XI01) [dpxxdisp.c   9736]
Tue Apr 18 19:39:25 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
DpJ2eeLogin: j2ee state = CONNECTED
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Apr 18 19:39:33 2006
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2736)
ERROR => DpProcKill: kill failed [dpntdisp.c   433]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Apr 18 19:40:04 2006
ERROR => W0 (pid 2744) died [dpxxdisp.c   12187]
ERROR => W1 (pid 2752) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2760) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2768) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 2776) died [dpxxdisp.c   12187]
ERROR => W5 (pid 2784) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2792) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 2800) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2744 (SIGUSR2)
ERROR => DpWpKill(2744, SIGUSR2) failed [dpxxtool.c   2468]
killing W1-2752 (SIGUSR2)
ERROR => DpWpKill(2752, SIGUSR2) failed [dpxxtool.c   2468]
killing W2-2760 (SIGUSR2)
ERROR => DpWpKill(2760, SIGUSR2) failed [dpxxtool.c   2468]
killing W3-2768 (SIGUSR2)
ERROR => DpWpKill(2768, SIGUSR2) failed [dpxxtool.c   2468]
killing W4-2776 (SIGUSR2)
ERROR => DpWpKill(2776, SIGUSR2) failed [dpxxtool.c   2468]
killing W5-2784 (SIGUSR2)
ERROR => DpWpKill(2784, SIGUSR2) failed [dpxxtool.c   2468]
killing W6-2792 (SIGUSR2)
ERROR => DpWpKill(2792, SIGUSR2) failed [dpxxtool.c   2468]
killing W7-2800 (SIGUSR2)
ERROR => DpWpKill(2800, SIGUSR2) failed [dpxxtool.c   2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1661
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 18 19:40:14 2006
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Wed Apr 19 02:40:14 2006
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2744 Ended         no      1   0             0
1 DIA     2752 Ended         no      1   0             0
2 UPD     2760 Ended         no      1   0             0
3 ENQ     2768 Ended         no      1   0             0
4 BTC     2776 Ended         no      1   0             0
5 BTC     2784 Ended         no      1   0             0
6 SPO     2792 Ended         no      1   0             0
7 UP2     2800 Ended         no      1   0             0
Dispatcher Queue Statistics               Wed Apr 19 02:40:14 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake event
tried swaping memory as metioned in sdn but seems doesnt work...
waiting for replies..
simraan.

Hi,
refer this threads...
Web Dispatcher is not started
Can't start Web Dispatcher
http://help.sap.com/saphelp_nw04s/helpdata/en/f5/51c7d170bc4a98b1b5a0339213af57/frameset.htm
Hope it helps..
Thanks,
vasanth.

ORA-21779: duration not active error line 25 of MDSYS.AGGRUNION

I execute the following pl/sql (line 56/57 in
a procedure called RebuildSMZLabels)....
v_query := 'SELECT /*+ INDEX ( A BASE_SMZ_A_SHAPE ) NO_INDEX ( A BASE_SMZ_A_RETIREDATE ) */ MDSYS.SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(a.s
hape,:1)) FROM &owner.base_smz_a A WHERE MDSYS.SDO_RELATE(a.shape,:2,''mask=ANYINTERACT querytype=window'') = ''TRUE'' and retiredate is
null';
EXECUTE IMMEDIATE v_query INTO v_union_shape USING v_diminfo(1).sdo_tolerance, v_trans_shape ;
And I get...
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
DECLARE
ERROR at line 1:
ORA-21779: duration not active
ORA-06512: at "MDSYS.AGGRUNION", line 25
ORA-06512: at "MDSYS.AGGRUNION", line 25
ORA-06512: at line 1
ORA-06512: at "MDCADM.REBUILDSMZLABELS", line 57
ORA-06512: at line 5
Got me beat... anyone got any ideas?
Simon Greener
GIS Manager
Forestry Tasmania

Dan
I reverted to the old 8i code (with individual
UNIONS) and it still fails:
DECLARE
ERROR at line 1:
ORA-21779: duration not active
ORA-06512: at "MDSYS.SDO_3GL", line 439
ORA-06512: at "MDSYS.SDO_GEOM", line 3096
ORA-06512: at "MDCADM.REBUILDSMZLABELS", line 74
ORA-06512: at line 5
Line 74 is:
v_union_shape := MDSYS.SDO_GEOM.SDO_UNION(v_union_shape,v_diminfo,v_shape,v_diminfo);
Any ideas as I need this to work in 9i ASAP (as it
doesn't work in 8i)?
PS Dan, it is the same database/code problem I sent
to you earlier this year. It is getting to the point
that I am going to have to rebuild all this database
centric code (which is where it needs to be in the
business process) within our GIS (ArcInfo) which is going
to be far more complex and not sustainable in the medium
term.
regards
Simon

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

PCA not active error msg

HI ,
can somebody help with the following error msg
Profit Center Acctg locked for posting in fiscal year 2007, company code 1801

Hi,
See whether you have activated PCA in OKKP T.code.Also,
Check in T.code OKE5,whether PCA for the corresponding year is active or not.
If not, select the check box in section control indicators.
Regards
A
Assign points if useful
Message was edited by:
Aravind

MRRL GR-based invoice verification not active error

Hi,
I have a vendor that has ERS active.
Before it was activated four POs were raised, goods receipted and invoiced. All 4 POs have freight charges (for the same vendor)
When I run MRRL with "Settle goods items and planned delivery costs", which I have to do, these four POs are coming in even through they are fully invoiced already. This is frustrating the clients who can't understand why old purchase orders are coming in at all.
any explanations or (even better) corrections?

Hi!
As have already mentioned for every purchase order with flag 'ERS' a table entry is generated.
If a goods receipt is posted, this goods receipt should be invoiced via ERS (transaction MRRL). Manually posted invoices should be avoided, because the record in table EKRS will not be deleted. Material documents will be written to table EKRS and if you invoice manually (for example, via MIRO) this entry will still be there. Then, correctly, the system
will read this table and take these items as not invoiced. This is correct and according to the standard system design.
In general, if you processed an invoice manually for a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run. To do so, you run ERS online in test mode, select the item and Exclude from ERS for the item. You can do this by Highlight the relevant lines and then click on the "Save" icon
('Exclude from ERS' - Ctrl+S ).
Best regards
Erika

How to i repair a printer not activated, error code -30 message when trying to save a file to pdf

Please help

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with Milos. Please provide more information for further troubleshooting.
From your initial subject it seems you are facing issue with printer activation on your server. The error may be caused if the wrong printer is set as the default printer, the printer driver is missing, or if there are conflicts in the device manager. Please
make sure below 3 steps whether it’s get some workaround.
Step one: Make sure the desired printer is set as the default printer
Step two: Re-install the USB Composite Device from Device Manager
Step three: Reinstall the Software for that particular printer
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ODS NOT ACTIVATED ERROR MESG

The creation of the export DataSource failed
Message no. RSBM035
HI,
PL HELP,
Diagnosis
The creation of the OLTP source &v1& was unsuccessful.
System response
Whilst generating the Export InfoSource, the Metadata for an R/3 OLTP source must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
@5C@ RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
@5C@ Error when creating the export DataSource and dependent Objects

Hi!
At least we have now the source of your problem. If you have a basis guy (or team), ask him to look after this.
There can be a lot of simple reasons for this problem: system is done (e.g. for offline back-up), system is overloaded (e.g. because of performance test), router dumped...
If you know this system and can logon yourself, you could check for some problems - but best would be to ask your local system administration.
Regards,
Christian

ICMAN is not active

Hello,
There is a strange problem in my ECC5.0 system. When I enter SICF and try to test one of the services (no matter what) I get error: "ICMAN not active"
icman service is active, I've tried to restart it but I still got the error I mentioned above.
Any ideas ?
Please Advice,
Dimitry Haritonov

Hello Dimitry,
can you please check wether the parameter:
rdisp/start_icman = true
has been set up?
If yes: go to Tr. SMICM -> GOTO -> SERVICES
are the HTTP (and eventually HTTPS) services active?
Regards,
Dezso

ICMAN not Active error in SICF

Similar Messages

Maybe you are looking for