ICO in PI 7.4

Need help on ICO in PI 7.4 do we need to create it mandatorily while developing scenarios in PI 7.4
i dont see any option of generating wsdl files in PI 7.4 swing tool in integration builder.
i need to create a POC where i need to pick a file from file server and expose it to NWBPM.

>> Need help on ICO in PI 7.4 do we need to create it mandatorily while developing scenarios in PI 7.4
Yes, or you can create Integration flow.
If sender is a SOAP adapter then only you can generate the wsdl.
reg,
avinash M

Similar Messages

How can i convert an ICO icon file to something I can use?

I downloaded a new icon for the game Quinn, but it is only in ICO format, I need to convert it to either an icns, or just an icon (so i can copy and paste it onto Quinn) But a google search brought up no way to convert ICO to any kind of usable Mac icon
Any help?

You can use GraphicConverter to convert ICO into other image formats.

Animated gif from .ICO files - Indicates layer is partially locked

thanks for helping the non-graphics newb out...
trying to create my first animated gif. I have 8 .ico files that i converted to .png to open them. once all are open i try to combine into one file with 8 layers but am unable to do it!?!? If I click on the main layer in any file it shows as locked and says "Indicates layer is partially locked"

in any file it shows as locked and says "Indicates layer is partially locked"
That is normal. Just open the file you want to use as the base/background layer. Now open the file that will be the first layer up from that, press ctrl+a (cmd+a on a mac) to select all of it, then ctrl+c (cmd+c) to copy it. Switch back to the background layer, click in it, then press ctrl+v (cmd+v) to paste it and use the move tool to position it. Repeat for each layer. Note that layers in an animated gif do not play in front of hte base layer the way cartoon cels do, so that you see action in front of a backdrop. You must include everything you want to see at once in each layer.

SAP 4.7 to ECC6 EHP5 Upgrade inc.OGSD - "/ICO/MOC_NEW_GUI" nametab error

Hello all,
I'm currently running a SAP upgrade from 4.72 to ECC6 EhP5 SPS6.
This upgrade include OGSD upgrade from4.72 SP12 to OGSD 6.10 SP5.
Duing phase upgrade phase RUN_RSPTBFIL_DEST, I have the following error message : Could not read nametab "/ICO/MOC_NEW_GUI".
According to OSS note 1377262, I download fix A61000INOGSD.SAR and extract file A-61000INOGSD.SAP in <upgdir>/cofiles (and also in <transdir>/cofiles).
Phase RUN_RSPTBFIL_DEST is still in error when I repeat it.
I note that content of A-61000INOGSD.SAP file is a little bit different regarding my error message:
Inside file:
I 2EETW109 table "/ICO/MOC_NEW_GUI" does not exist in nametab.
My error message:
2EETG011 "[DESTINFO] Could not read nametab""/ICO/MOC_NEW_GUI"
Many thanks for your help & feedback,
Chris

Hello Chris,
we experienced the same issue as you.
After discussion with the SAP Support team, it appears that this migration path is not the good one.
The right procedure is now to upgrade to ECC6 EhP5 with OGSD 6.10 SP0 and then to apply manually the SPs you want on OGSD add-on.
I think they are currently updating the corresponding OSS Notes.
I hope it will help.
Vincent

How do I save ico in Photoshop CC

I have recently updated to Photoshop CC and can no longer save files to ico format. In CS6 I had a plugin from this website: http://www.telegraphics.com.au/sw/ but they don't have anything for CC listed yet. I tried to drag that plugin into the CC plugin folder and it didn't seem to change anything, restarted Photoshop and the machine as well.
Does anyone know if there is a new plugin out there. I used google and couldn't find anything, maybe I'm searching for the wrong words. Any help on this would be appreciated, I need to make a little more than 300 icons this month for my companies product and don't want to have to install CS6 back on the machine.

you can download the plug-ins called Telegraphics. I have Photoshop cc 2014 installed on windows 7 64 bit so i download from the website Windows (64 bit)
After you download the plug-ins ( in the archive is ICOFormat64 ) you have to copy to the file File Formats, in my case is C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\File Formats.
Have fun !

PI 7.3 receiver AAE idoc scenario-No receiver comm channel found in ICO

Hi,
I am working in PI 7.3 receiver AAE idoc scenario.When I try to configure Integrated Configuration(ICO),I am not able to see the receiver comm channel in receiver agreement.
What is the reason for this??I have configured the communication channel,but still its not shown in reciver agreement dropdown.
Please help.
Regards,
Sriparna

Hi Sriparna,
In PI 7.3 there is are two separate IDoc adapters: "standard" IDoc adapter and one that is dedicated for AAE (ICO). Make sure that you have used the right one - most probably not, which is why you cannot see the channel in the dropdown list.
Hope this helps,
Grzegorz

Response Message in ICO

Hi All,
We are using an ICO scenario SOAP to SOAP (XI 3.0)
when the scenario is successful I get two entries in RWB Message Monitoring.
sender -> Receiver (Requet)
Receiver -> Sender (Response)
But If there is a exception in the response mapping, the Response flow is not at all logged in Message Monitoring.
In the audit log of request flow it says "continuing with response Message ID - 7224724xxxxx". But if I use this Message Id and query the Message Monitoring I cant find any message.
Even if there is an exception in response mapping I would expect an entry for this response flow.
Is it a known issue/limitation of AAE scenarios.
Please share your thoughts/experience.
Thanks.
Sudharshan N A

suggest you to raise a message with SAP.
This could be a bug.

How do you make a .ico file in Photoshop CS6?

I used to use a plugin in previous versions, but the file formats sub-directory is missing from the plugins directory. See screenshot :
Surely this should be possible in CS6 (extended even) straight out of the box given that every web developer on the planet needs to make loads of these ...

I read this thread today to try and place the .ICO plugin in the plugins folder.
It didn't work for me either. However.... I found for some reason when I installed CS6 on to my 64bit PC.... it has installed it in two different places.
The first place I tried was in the [Progam Files x86] - seems the right place...right? Not so, for some reason.
Whereas... I found a Photoshop CS6 file in [Program Files] folder too. Popped the plugin in there.... and it worked.
Not sure why I have two installs...? but hey it works.
Cheers to those with useful comments.
#rolleyes at those who didn't.
Thanks folks.

How to use .ICO files in RH7?

Hi,
I'm not able to add .ico images into my help topics. Ideally,
I'd like to be able to link to exactly the same files as the
developers.
In a related topic, I'm also looking for a good graphics tool
for converting .ico files to .png files.
Any ideas? Thanks!

Welcome to our community, Wemu
I don't believe you will have any success just linking to the
files. You will need to convert to .GIF, .PNG or .JPG.
You may find the link below useful:
www.convertico.com
Cheers... Rick

How to install a plug-in to create a .ico file

I am new to Photoshop, I have CS6.
I want to create a .ico file, I understand I need a plug-in to do so, where do I find the plug-in to install?
Also, I have gone round in circles trying to find out how to install a plug-in. I didn't find the pdf help file very helpful on the subject.
Thanking you for any help.

Try
http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html

Changing existing classical scenarios in ID to ICo post PI upgrade

Dear Members,
Installed a test PI 7.11 system and restored primary PI DEV system backup on to the test PI system and then the test PI 7.11 system was upgraded to PO 7.4 dual stack system. Done with the post up-gradation activities and the test PO 7.4 system was up and running.
Now, all the ID config objects in the upgraded test PO 7.4 system remained as classical scenarios with sender agreement, receiver determination, interface determination & receiver agreement etc.,
Need a clarification here i.e., how to change the existing classical scenarios to ICo objects in the upgraded PO 7.4 test system..? Do we need to delete the existing sender agreement, receiver determination, interface determination, receiver agreement objects and manually build ICo objects for the respective scenarios (or) do we have any other alternative.
I suppose that the Content Migration Tool doesn't suffice my requirement, as the new PO 7.4 system is not a parallel system built against the existing
PI 7.11 system. I directly performed the upgrade activity on the test system and not on a parallel built system.
In this case, can someone advice how to change the existing classical scenarios to ICo objects i.e., manually (or) do we have any other alternative.
Br,
Saiganesh

Hello Martin,
Finally got it. In the migration tool, configured source system also with the same details as the target system and then the migration of classical to ICO was fine.
Closing the thread.
Br,
Saiganesh.

Processing Large Files using Chunk Mode with ICO

Hi All,
I am trying to process Large files using ICO. I am on PI 7.3 and I am using new feature of PI 7.3, to split the input file into chunks.
And I know that we can not use mapping while using Chunk Mode.
While trying I noticed below points:
1) I had Created Data Type, Message Type and Interfces in ESR and used the same in my scenario (No mapping was defined)Sender and receiver DT were same.
Result: Scenario did not work. It created only one Chunk file (.tmp file) and terminated.
2) I used Dummy Interface in my scenario and it worked Fine.
So, Please confirm if we should always USE DUMMY Interfaces in Scenario while using Chunk mode in PI 7.3 Or Is there something that I am missing.
Thanks in Advance,
- Pooja.

Hello,
While trying I noticed below points:
1) I had Created Data Type, Message Type and Interfces in ESR and used the same in my scenario (No mapping was defined)Sender and receiver DT were same.
Result: Scenario did not work. It created only one Chunk file (.tmp file) and terminated.
2) I used Dummy Interface in my scenario and it worked Fine.
So, Please confirm if we should always USE DUMMY Interfaces in Scenario while using Chunk mode in PI 7.3 Or Is there something that I am missing.
According to this blog:
File/FTP Adapter - Large File Transfer (Chunk Mode)
The following limitations apply to the chunk mode in File Adapter
As per the above screenshots, the split never cosiders the payload. It's just a binary split. So the following limitations would apply
Only for File Sender to File Receiver
No Mapping
No Content Based Routing
No Content Conversion
No Custom Modules
Probably you are doing content conversion that is why it is not working.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Mar 5, 2012 12:58 PM

Condition Based Interface Determination in ICO (AAE) - PI 7.1 EHP1

Hi Friends,
We have PI 7.1 EHP1 - SP 04.
In our scenario, we have 1 outbound interface and 2 inbound interface. Based on condition, it needs to select the first inbound interface or second inbound interface.
In the normal configuration, we are able to select. (By click + icon and add condition in the Receiver Interfaces in Interface Determination Step)
When we create configuration using ICO (Integrated Configuration), there is no option in "Receiver Interfaces" Tab to add two inbound interfaces with condition.
Could you please clarify how do we do this in ICO?
Kind regards,
Jegathees P.

IMHO, condition based interface determination is not possible in ICO.
Use Multiple inbound service interfaces... You can handle in design level .. ESR level.
Check the Abhishek's blog... This might be helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?quicklink=index&overridelayout=true
Note: Since in your case you need two receiver agreements, you cannot handle through ICO. The above link might be helpful to do multimapping without BPM.
Edited by: Baskar Gopal on Apr 26, 2011 9:53 AM

RFC To SOAP With & Without ICO

Hi,
First Scenario RFC To SOAP (External Webservice) with ICO object is resulting with following error:
This error could be seen in Sender Communication Channel for Response message.
Error in processing caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: got unexpected document type:DOC_TYPE_UNKNOWN
I searched help for the same error in SDN forums there are only two links on the same topic:
1. DOC_TYPE_UNKNOWN
2. DOC_TYPE_UNKNOWN RFC -> XI ->Webservice
Didn't help me much to solve the issue:
Second scenario RFC To SOAP (External Webservice) without ICO object is executing fine.

Any solution...
Have any one tried this scenario. Please let me know ur inputs to solve this issue.
Edited by: Praveen Kurni on Jan 6, 2010 11:16 AM

Sender file channel in DLNG mode when ICO used

Hello All,
I am working on SAP PI 7.4 version Dual stack installation.
As part of Inbound Interface development, Operation mapping has been included in Integrated Configuration Object (ICO). But when tried to execute the Interface the sender File communication channel always into Delivering mode DLNG and it never went to DLVD mode while reading input file.
Hence I have followed the traditional approach of by creating all configuration objects RD,ID,SA,RA in place of ICO. Now the communication channel is able to read the input file successfully.
Can any one please tell me the reason behind this issue
Note : There were no changes/corrections made to the sender file channel.
Thnx&Regards,
Moorthy

Hi naresh,
Check the communication channel montiring tab ,give the channel name and see whether able to ping the destination and down you can see logs as well.
Regards,
Loordh.

ICO in PI 7.4

Similar Messages

Maybe you are looking for