ICO Synchronous messages failure

Hi Experts,
I have an ICO configured synchronous scenario..SOAP Sender (3rd party system) - PI- SOAP Receiver (ECC), ABAP Proxy is generated on ECC. Messages were flowing successfully till yesterday but today messages are failing with the below error:
SOAP: call failed: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageHeader.getMessageId() of an object loaded from local variable messageHeader
Screenshots of sender, receiver adapters and error logs are also attached. Please check and help me resolve the issue.
Thanks,
Mani

Hi Experts,
Thanks for your quick responses.
Hi Indrakit Sarkar,
Yes, I think the problem is with the HTTP destination in NWA. I am unable to ping it. The same type of connection from ABAP stack is however working fine. Please check the screenshot attached and advice how to resolve the issue.
Thanks a lot,
Mani

Similar Messages

SXMB_MONI not displaying Synchronous messages

Our production instance of XI only displays Asynchronous messages and those Synchronous messages that fail. For testing purposes I need to see all my Synchronous messages, regardless of success or failure. Is there some configuration I need to do to modify this behaviour. I've searched SDN without any luck.

Steps are mentioned in this Blog by Michal
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Thanks
Farooq.

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE.

Continuous CCMS alerts on failed synchronous messages

Hello,
We have failed synchronous messages in our PI system and get a CCMS u201CMessage age alertsu201D every hour. I canu2019t make it stop without disabling monitoring which I donu2019t want to do. The messages can not be deleted or canceled so I get this alert every hour. When I try to cancel the message in SXMB_MONI I get this message:
You cannot cancel XML message 001E0BC80F681EE09FB5DB3E37C38A21 with this status/type
Message no. XMS_ADM108
Diagnosis
You tried to exit an XML message.
System Response
However, you can only exit XML messages that were closed incorrectly.
What can I do to get rid of these old messages? Note: I am a Basis guy so donu2019t have deep XI knowledge and our XI guy is busy with production issues right now. Any help is greatly appreciated.
David

I think I found it. I needed to schedule the delete job SAP_BC_XMB_DELETE_100 in SXMB_ADMIN. This deleted the old failed messages which should clear things up.

Message failure problem

When I send a message to a friend in Texas, it says message failure but when I called him he said that he had a stable wifi and the same thing happened to him. How do I get messages to him?

Hi frosztbyte,
I understand your parents have an OfficeJet Pro 8600 that is saying it has a printer failure, that you have thus far not been able to clear, despite your best effort and a rain dance (at least I know who to blame for the rain now ). I would be happy to help you as best I can!
The first thing I'd suggest you do is plug the printer directly to a wall outlet if it isn't already plugged to one, just to ensure the printer is getting all the power it needs to function properly. If that doesn't seem to change anything though, please have a look through this A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document (it was steps for the same error without an error code as well) and hopefully it can help resolve the issue.
If the issue persists after trying the wall outlet and that document I would advise you try call HP again. I believe the number you called previously may have not have been HP, but another company. If you're in North America just call 1-800-474-6836, and if you're anywhere else have a look at this Contact HP Worldwide page to see what number to call for your area.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Message failure notices about emails I haven't sent

Starting yesterday, I began receiving message failure emails in by inbox and junkfolder about emails that I didn't send. When I got the first message, it seemed apparent that I was hacked, so I quickly changed my email password. Since then, the failure
notices have continued so I changed my password one more time. Again, the emails have continued. It appears that the emails from my email address are being sent all over the world... Australia, Germany... etc. I've emailed Outlook to ask them their advice.
Any thoughts that anyone has on what more I can do would be appreciated. Thanks so much.

Hi Friend,
Generally, this kind of problem occurs due to the virus/malware attack on a computer or Outlook. Scan your whole computer with Antivirus program and contact with your ISP (Internet Service Provider) coordinator to fix this issue either it can create a big
trouble for your PC.
This link can help you to get overcome from the viruses attack on your Outlook:
http://email.about.com/od/spamfightingtips/qt/Ignore_Delivery_Failures_of_Messages_You_Did_Not_Send.htm
Thanks
Clark Kent

Synchronous message QOS in PI 7.1 and pipeline services QOS

Hi All,
As I understand,PI uses pipelines services (other than integrated Configuration based on AAE) for routing and mapping.Synchronous messages have QOS as BE.If they are also implemented as pipelines services,how does the QOS of pipeline queues (ie EO/EOIO) relate to QOS of BE.
Some how thinking of queues always relates to asyn messages(other than temp or request/response queues),so I am bit confused how a synchronous message flow uses pipelines queues which are asyn in nature.
Regards,
Premjit

Hi Premjit,
please refer to chapter 7 in the link below for more info on this.
http://www.sap-press.de/download/dateien/2221/sappress_netweaver_process_integration.pdf
Hope this helps.
Regards,
Deepak.

Avoid processing of Duplicate Synchronous Messages

Hi,
I have two synchronous messages coming with almost zero delay in it. Both the messages contains the same data which is causing a major problem in the backend.
I want to avoid the processing of duplicate message. My scenario is HTTP to SOAP (sync)...
The option that I thought of are:
- Using BPM so that messages can be sent sequentially to backend and there it can be checked for duplicate entries (client is not ready to use BPM)
- Providing Delay in Message Mapping...(I will end up with same issue as same amount of delay will be provided to both the messages may or may not but dont want to take risk)
- I cant make a look up to see if entry already exists as the difference between incoming duplicate messages are so small that it will not give the desired result.
Also thought of creating message ID in URL only but it is not possible with QOS BE.
Is there any way through which I can process the sync messages in sequential way... or something that will avoid processing
of duplicate messages?
Any thought?
Thanks,
Sunil Singh

Hi Sunil,
Checking the data weather is duplicate or not (ie, its already resides in Rev application) would sure require to use of lookup or BPM.
>
SUNIL SINGH wrote:
> I want to avoid the processing of duplicate message. My scenario is HTTP to SOAP (sync)...
even if the data is comming with some delay between them. how will you check that is duplicate message or not unless you use lookup or BPM in it to compare two independent messages at runtime.
My idea would be! instead of trying to put a validation at PI.
check in the source system whats causing their application to generate duplicate messages in first place and send it to PI.
check whats the issue over there and ask them to rectify it or rather not to trigger duplicate data. (it would be easier to control this from source application).
PS: even if we find a way to stop duplicate messages to be processed inside PI. its unnecessary load for PI.
-->Senthilprakash.

Message monitoring of synchronous messages

Guys,
whenever I check a synchronous message in message monitoring, its audit log is correctly shown but the message (header and payload) are not shown, returning the message "The message was deleted to save memory" or something like that.
Does anyone knows how to enable message monitoring to show the messages from sync messages?
Thanks in advance,
Henrique.

Hi Henrique,
From SP12, the payload of sync messages is cached in memory rather than persisted. These payloads are deleted to prevent them from accumulating in memory.
You just have to set:
messaging.syncMessageRemover.removeBody = false
in the AF messaging service in the visual admin
and you'll be able to trace sync calls
you only need this for sync
if you set this you'll see sync messages in,
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
(so in the monitor for adapters)
async are logged there by default so no need to change anything for async calls...
Regards,
Abhy
Message was edited by: Abhy Thomas

Problems with synchronous message in XI

Hi
I have the following scenario involving XI 3.0 ( SP 12 )
XI has exposed a webservice ( WS provider ) and this webservice is being called from a web application. On receiving the webservice call, XI synchronously calls a RFC on the SAP backend and the response is mapped back as a webservice soap response to the calling web application.
Now, I see sometimes ( not always ) - the incoming message from the web application has a status in SXMB_MONI -
<b>Message scheduled (commit follows)</b>
with a green flag and this message is never processed - i.e The message comes into XI from the webservice call - but beyond this - there is no call to the RFC receiver adapter ( the receiver adapter- comm channel is ok as seen in the adapter monitoring )
Since synchronous messaging does not involve any queues ( I hope my understanding is right ), I am not sure why this occurs and what to do to push the message forward in this synchronous messaging scenario ??
Thank you in advance for your time .

Hm we have a slightly different version of that problem.
The message is wirtten into a queue, gets the green flag and the message is processed.
But the flag as well as the status stay...
Has anyone soem background information about how the queuing and scheduling and execution planning is done?
I have quite an idea about queue filters and how to set-up queues. But I have no idea how the synchronous stuff fits in and what this "Message scheduled (commit follows)" exactly means.
Cheers,
helge

Alerts for Receiver Adapter and Synchronous Messaging

Hi experts,
I am working on XI 3.0 SP 17. I am doing alert configuration in XI . In below 2 cases we didn't receive alerts for errors.
1) In case of errors in receiver adapters.
2) If an error occurs in synchronous message processing.
What would be the Problem?
Please help me out its very urgent.
Regards,
Hari

Hi Hari
For raising the alert related to Adapter specific you need to create alert rule in RWB and select the adapter option and then select the adapter for which u want to raise an alert.
To configure your alerts, proceed as follows:
● Create the alert categories that you want to use in your alert rules.
● Create the alert rules in which you want to use your alert categories.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Custom Alerts in CIC Win Client for CRM 5.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601db2b2-2839-2a10-0381-8807979f6ff8
Understanding u'r SAP EarlyWatch Alert Report
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
regards
Sandeep Sharma
If helpful kindly reward points

Are fault messages applicable to synchronous messages also?

Hi Experts,
I have been trying to understand FAULT messages in XI.
The blogs I have seen so far discuss FAULT messages in Asynchronous scenarios only.
This makes we wonder if it cannot be used for Synchronous RFC scenarios.
Can somebody confirm this?
Thanks
Gopal

Fault messages can be used for Synchronous scenarios also.
To do a self-check create a Synchronous Message/ Service Interface....you will observe that the Fault message type section gets enabled.
For reference: http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1964483350DB02509562514351735296End?blog=/pub/wlg/2759
Regards,
Abhishek.

Persistence of synchronous messages in adapter framework

Hello experts,
When i go to RWB -> message monitoring -> adapter engine -> Database, the synchronous messages are persisted for only one hour. Is there a way to customize it?
Cheers,
Thiago Delou
Basis Team

Community.
The Adapter Engine doesn`t persist synchronous messages in PI 71. It is not a matter of configuration.
It keeps in memory the last 1000 (configurable) messages.
http://help.sap.com/saphelp_nwpi71/helpdata/en/92/25ee41c334c717e10000000a155106/frameset.htm
Cheers,
Thiago Delou
Basis Team

Getting synchron message data from advanced adapter engine

Hi,
we have to get all synchron messages from the advanced adapter engine. Normally all messages with errors must be persisted on data-base. How this will be done? We try to with
/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence).
But this don´t work :-(.
What´s about correct messages? How this can be persisted?
Is there a API or we must implement a Adapter Module?
Thanks in advance,
Frank

Hi,
if you just want to see the msg and not its audit log, then in PI by transaction SXMB_ADM - integration engine configurtion - configuration data, add a entry for RUNTIME category LOGGING_SYNC parameter and set it to 1...........then you can see your synch msgs in SXMB_MONI transaction in your PI system.
Regards,
Rajeev Gupta

Logging a synchronous message using diagnostic header (WITHOUT LOGGING_SYNC

This [link|http://help.sap.com/saphelp_nw70/helpdata/EN/d6/49543b1e49bc1fe10000000a114084/frameset.htm] indicates that a synchronous message can be logged by using:
<SAP:Logging>1</SAP:Logging>
within the message header even if LOGGING_SYNC is deactivated at the server configuration.
I'm using HTTP client tool to submit a message and trying to figure out how to pass this tag. Any ideas?
Regards,
Shahab

If LOGGING_SYNC is deactivated in IE Configuration, then you cannot see th req. and resp. message in MONI.
Synch. messages are not persistence by default. To acheive it, we need to set the logging.
Thanks
Farooq.

ICO Synchronous messages failure

Similar Messages

Maybe you are looking for