Icoc for material movement

What is the IDoc for Material Movement?
thanks

Janice,
Check this michals weblog:
/people/michal.krawczyk2/blog/2006/09/19/aii-material-movements-to-erp-r3-via-the-xipi
Also WMMBID01 idoc is used for material movement.
---Satish

Similar Messages

  • Link Material Document generated for material movement due to production

    Hello Expert,
    I am creating a zreport for Material Consumption during Production. I am assuming Confirmation entry in PP module as a base of this report and linking to Material Movement data in MM Module. But I am not able to link this data from tables.
    Can you pls guide me how to link Material Document generated for material movement due to production confirmation entry and actual production confirmation entry.
    Thanks
    Shailendra

    Hi Shilendra ,
    You can create a report with the logic. That all the materials which are created due to backflushing confirmation are created with movement type 131 and the component material are consumed by movement type 261.So you can create the report with this logic.
    Dont forget to award Points if it helps.
    Lekhram

  • Output Determination for Material movement

    Hi All,
    I am configuring output Determination for Material movement.
    In my case, am doing the config when the movement type is 311, we want to generate IDoc.
    i have configured everything, output type,output Determination schema..
    When i am trying to maintain the condition record for the same through MN21,
    here i am facing one problem on Partner Function.
    Here what partner functuion i'll give.
    waiting for all valuable response.
    Regards
    Indrashish

    Hello Indrashish,
    Maintain that output type as partner independent.
    This will help.
    Regards
    Arif Mansuri

  • SAP Standard Followup Action for Material Movement at the time of UD.

    Does anyone know if SAP offers a standard Followup Action that once completing the Automatic Usage Decision, it will perform a Material to Material movement at the same time. 
    Exampe: I have two Materials with different Inspection types and Inspection Plans that will get processed and made into CP14.
    1) CP14H - Incomimg Inspection Type Z01
    2) CP14.B1 - Inprocess Inspection Type Z04
    Both materials get assigned to the correct plan.  They are then tested for required characteristics.  If all are in Spec, an auto Batch Job complete the UD.  At the same time I want to do a Material to Material movement to CP14 Unrestricted Stock for both inspection lot types.  Right now to do the Material to Material movement I have to complet a MIGO transaction manually.

    Look at FM QM06_FM_TASK_GOODS_MOVEMENT.
    It is a standard function module that is used in the action boxes in a quality notification to perform a goods movement.  It is meant to be interactive with the user so it won't work as is, as a follow-up action to a UD.  But you might be able to have your programmers copy this FM and use it as a basis to create your own custom code for your follow-up action.  It might save you some time.
    FF

  • Amount not turning up for material movement type : 601 from 2lis_03_bf

    Hi all,
    i have loaded the inventory cube from 2lis_03_bx the quantity is turning up for movement type 601 but the amount is not getting reflected it is always blank.
       If   (  SOURCE_FIELDS-BWVORG EQ '000'         "Other Issues
       OR    SOURCE_FIELDS-BWVORG EQ '101'        "Returns / Vendor
       OR   SOURCE_FIELDS-BWVORG EQ '104'         "Material Transfer
       OR  SOURCE_FIELDS-BWVORG EQ '105'          "Stock Adjustment InvD
       OR   SOURCE_FIELDS-BWVORG EQ '106'         "Stock Ajdustment Other
       OR  SOURCE_FIELDS-BWVORG EQ '110' )
       "Issues from stock transfer
       AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
    only movements which are relevant for stock control
       AND SOURCE_FIELDS-BWBREL EQ '1'
       AND SOURCE_FIELDS-BWGEO  <> 0
    SEE OSS NOTE 630254
       AND (  SOURCE_FIELDS-BSTTYP IS INITIAL OR
                   (  SOURCE_FIELDS-BSTTYP CA 'EQ'  AND
                      SOURCE_FIELDS-KZBWS CA 'AM' ) ).
    *IF THE RETURNCODE IS NOTE EQUAL ZERO, THE RESULT WILL NOT BE UPDATED
         RESULT = SOURCE_FIELDS-BWGEO.
    and i can see for other movement type like 641 the amount is turning up.
    Can anyone advise me on this
    thanks

    does the material movement type : 601 will be updated from this data source : 2lis_03_bx nor it is from 2lis_03_um??
    Can anyone advise me on this!!
    thanks

  • Movement types for material movements in refurbishment process

    Hi,
    I require some clarification about the movement types to be used when posting material movements in the standard refurbishment process.
    I am mentioning the standard refurbishment process below. Please correct me if I am wrong or if I missed anything.
    1) Dismantle a defective spare part from the machine.
    2) Take this defective spare to a storage location for unserviceable stock. (Materials movement-post GR)
    3) Withdraw a new or repaired spare for the above material. (Materials movement-post GI)
    4) Install the the above new or repaired spare to the machine.
    5) Repair the defective spare.
    Now I am confused and what I require to know is that for steps 2 and 3 what transaction to use for goods movement and what standard movement types are recommended for this GR and GI?
    Thanks and regards,
    Abhijit Dutta

    Abhijit Dutta
    The standard Refurbishment process does not involve the initial move into the warehouse/stock. That is part of the standard maintenance processes.
    The Refurbishment takes defective item from the warehouse (goods issue), repairs them, and returns the, back to stock (goods receipt). Usually these items are valuated stock.
    [SAP Help|http://help.sap.com/erp2005_ehp_04/helpdata/EN/5b/ae3bf14b8611d182ba0000e829fbfe/frameset.htm]
    PeteA

  • Block Storage Location for Material Movement

    Dear MM Gurus,
    pl let us know how to block storage location for a material in Plant.
    Requirement is transfer posting (MIGO)  should not allow by using 311 mov type in sloc, error message to receive.
    example ;
    material ; 5000
    sloc ; 0001
    sloc ; 0002
    migo-transfer posting should not happen by using 311
    5000
    0001 - to 0002
    we want to block sloc-0002, how to block sloc, pl help if any solution available.
    thanx in advance
    regards
    srihari

    Hi,
    You can block the material completely for any movement type by checking <b>X Plant matl status</b> in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object  M_MSEG_LGO    can be worked to remove the movement type or storage loaction .
    Dhruba

  • Account determination for material movement.

    Dear Gurus,
    I would like to know if its possible to modify from the sales documet the material account. So when i create a sales document for product A i could change any value in order to post the material movement at another account.
    Please let me know if i am not clear.
    best regars.
    Juan

    Hi Jaunbret,
    Can you please eloberate your question.
    Regards,
    Sharan

  • Options for material movement across SOBs

    we have a situation where we need to transfer material across inventory organizations situated in different SOBs.
    1. I read somewhere that inter-org transfer cannot address this situation is this true?
    2. can we use internal sales order(ISO) for this
    3. If not then what is a solution

    Navigation path is Inventory>>>Transactions>>>Inter-organization transfer
    Moves material from one of three plants in the US to a plant in Canada or Canada to the US.
    From a parts perspective works just fine...never heard any complaints from the bean counters.
    We also use internal orders as well

  • Output Determination Procedure ME0001 for Material Movements

    Output determination procedure ME0001 is used for inventory management output.  I know where it is maintained.  Where is this assigned in the IMG?  I can not find the assignment and am starting to think everyone has to use ME0001.

    Found some SAP documentation on MM output management.
    ME0001 "is a program constant and cannot be changed by the customer.".  New custom output types can be added to ME0001, but a custom procedure cannot be used.

  • T-Code OLI1BW for Material Movements- getting time out error

    Experts
             please help me to solve this problem...

    hi,
    whenever you try to load setup tables start the job as background jobs and do not schedule it directly.
    the direct job has a time limit defined by the system administrators which would cancel the job if the time limit exceeds the max permissible limit.
    The time limit for background job is more so please schedule it as background job.
    it will get complete.
    regards,
    Arvind

  • OLI1BW - Setup for Material Movements - ERROR

    Dear friends,
    When i execute transaction OLI1BW i am receving an error message: "Plant 1347 does not exist",  do you have some suggestion to correct this problem ???
    Thanks in advance.
    Fabrício

    Hi,
    Its a Pilot/SPC Note so you'll have to open a msg to get Devlpt to add you as a pilot customer.
    There is essentially no difference between pilot & generally available notes. Notes on pilot release are available only to customers added as pilot and thus are implemented by limited number of customers who require this fix. Please see SAP Note 538778 for further details.     
    Rgds,
    Colum

  • Extracting Material Movements at Material Level

    Hello,
               Does anybody know how can we do a set up at material level and not material document level in Inventory management?  Here we have 2 options for capturing Material movements - material doc number and document posting date but not at material level.
    Thanks!
    Edited by: BI Quest on Aug 15, 2008 5:25 PM

    Hi,
    The setup filling program deosnt support material wise set up filling for material movements.
    So I am afraid, we cant do that.
    Naveen.A

  • Problems filling material movements setup table

    I am trying to fill the statistical setup table for material movements (OLI1BW).
    I have given a name and entered posting dates 01.01.1998 to 31.12.2002 and have put the date of termination in the future.  However, the run does not start whether I execute in the foreground or background.  I have checked NPRT log and 0 records with 0 time.  Does anyone know why this could be? Thanks
    It is okay I had put the posting date in the material doc field
    Message was edited by: Niten Shah

    nitesh,
    what you did?how can you put posting date in material doc field?
    You have to put it in 'selection by posting date' field
    or you can give material doc range in 'selection by material doc' field
    Thanks
    Teja

  • Statistical Setup: Material Movements

    I am about to fill the setup table for material movements.  I plan to fill the setup table with all data but will do so by using posting date range to get smaller sets of data.
    Can I use the same name for all of the runs and if so do I need to make sure that the new run indicator is not selected? Thanks

    hi
    You can use the same name for all runs..But the logic behind giving different name is..Whenever you get an error during init run due to system failure or something else,if you want to check the logs and rerun it..you should know the name of the run...
    Logic in the sense...the idea behind that
    Hope it helps you
    Teja
    Message was edited by: Teja badugu

Maybe you are looking for