Icon Folder with question mark

Hi
My MacBook doesn't boot anymore.
When i start up my mac, I get an icon with a folder with a flashing question mark in it.
I tried to re-install the OS but when it gets to the part where it asks where to install everything, my hard disk doesn't appear. It doesn't appear nether if I use Disk Utility.
Thanks for your help

Since the drive is not showing up, there's a good chance that it has failed. Apple has had some problems with Seagate OEM drives, and even has a replacement program. If you feel confident enough to take off the "L" bracket that covers the RAM bays and hard drive bay, you could slip the hard drive out and check to see if it's a Seagate, then contact Apple either through customer service or the genius bar at an Apple store. You could also replace the drive yourself buying a notebook HD from Macsales or Newegg.

Similar Messages

Folder with Question Mark, to Apple Icon, to Kernel Screen at Startup.

At startup Folder with Question Mark, Followed all steps to resolve it to no avail, I try to re-install Snow Leopard and Apple Icon with Grey screen appears, then Kernel screen.
I cannot get past the Kernel screen. No options to click anything, like system preferences or anything. I have a Macbook, with Snow Leopard. Any help would be much appreciated.
I tried Pram Reset and everything.

Hey, thanks for the quick reply Mende.
I tried that, it goes to the apple icon, however after about 10 seconds of the apple it goes straight to the Kernel screen. It doesn't give me the options of opening anything. Infact it doesn't even have a mouse curser.
If I hold "option" it gives me the option of choosing only the "Leopard DVD" but that's it and then it goes to the Kernel Screen
Again, thanks for the taking the time to help me out.

Folder with Question Mark on Boot

I can't get my mac to boot. Instead I get the gray screen and a folder with question mark icon. I'm guessing the HD is dead? Any chance for recovery? If not how much does a new one cost? The one year warranty just expired!
Please help!
Thanks,
Brian

So, what is it? The thing froze today and wont reboot - just a gray screen with NOTHING. Then after about 10 min. the flashing question mark folder appears.
So, I popped in the install DVD that came with the computer, get the little gray Apple logo and it boots from the DVD.
Launch Disc Utility. The HD appears on the left. Click on it - all of the "Verify" and "Repair" buttons remain grayed out. So what the hxll do I do?
I cant boot into single-user mode or any other mode for that matter.
This is a Macbook pro, dual-core Intel, less than a year old.

Flashing folder with question mark at Startup

Here is what I know so far.
- The computer was powered off by pushing the power button without shutting down.
- The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
- It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
- It would not come up in safe mode (Shift)(The flashing folder came up again)
- I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
- I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
- It would not come up in Verbose Mode (Command V) Error loading Kernel again.
- I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
- I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
Does anyone have any suggestions?

Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
Thanks for your help.

HT1366 How to fix Flashing Folder with Question Mark on Mac

How to fix Flashing Folder with Question Mark on Mac

RichardEL is probably correct. I’ll go through your questions.
> there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not. The System Disk partition would be below the HD icon indented to the right. It is usually called “Macintosh HD” unless you renamed it.
> when I go into disk utility my HD appears on the left, but I can repair or verify it
Odd. It appears but you cannot manipulate it with Disk Utility.
> The S.M.A.R.T status reads verified
If it did not say Verified then it would indicate a problem. Saying Verified does not rule out problems but I think it indicates it is still breathing.
> Is the HD deceased?
If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing. If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
> [If I] restore from time machine [will] everything will be back as it was before?
Yes. That is the beauty of Time Machine. All your data, applications, and system preferences will be as they were as of the last backup.
> I was thinking of erasing the HD, would this be of any help or do I just need a new one?
Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk. Before proceeding it may be useful to have an expert at an Apple store look at it for you. They may be able to revive it without a clean install or new disk.
As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help. To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk. Here are links to the screwdrivers and enclosure you would need.
$5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
$22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition. Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros. This will write to every sector to map out bad blocks. (If you have an SSD do not write a pass of zeros.)
If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly. Google “Seagate 1 TB hybrid SSHD”.

I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

My MacBook pro stop working and it shows folder with question mark after this update, it's not my fault, Apple should solve the problem with out ask me to make payment

After updating my MacBook pro it shows only a folder with question mark on it
It is not my fault, Apple updates problem
They should solve it fir me without make any payment
Thanks

Try starting your computer holding down the option key as soon as you hear the startup sound, and continue holding it. Hopefully, you will see the icon for your startup disk come up on your screen within a minute. Click on that icon and press return. If your machine starts up normally from there, go to System Preferences > Startup Disk and reselect your startup volume

Blinking folder with question mark! Recovery mode not recognising hard drive!

So today on my MacBook Pro 13" mid 2010, for some reason a CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside. So I looked up on how to force eject it out, and I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work. After I turned on my MacBook Pro and on the startup I found the blinking folder with question mark! I went through Internet recovery mode, and I found out that it did not recognise my hard drive!
-Do I have to replace my hard drive?
Please help! I'm fairly new with computers :(

Kazmunai wrote:
I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work.
That was for very old Mac's and PC's, it's been a long time since any modern Mac had that ability.
CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside.
Press and hold the power button down to force a hardware shutdown.
Hold the trackbutton down and the option/alt key at the same time, now boot the machine.
The disk should spit out and you should eventually see a row of icons appear on the screen, this is Startup Manager and you can pres the eject key here also to get the cd to spit out.
If you see MacintoshHD (or your OS X boot volume) click it and the arrow underneath and when you get into OS X, head to System Preferences > Startup Disk and set it again. Your problem should be resolved at this point.
If you don't see your OS X boot volume and it shows RecoveryHD only, or holding the option/alt goes to Internet Recovery, then your boot drive is dead or there is some sort of other issue/power /Mac related.
Try a #1 SMC Reset and a #2 PRAM reset and see if that fixes things.
..Step by Step to fix your Mac
If not, I then suspect because you couldn't eject the cd that something electrical bad happened to the Superdrive and as a result it also effected the power or something going to the boot hard drive.
The hard drive might still work just fine if it's removed from the machine and a SATA to USB adpater to another Mac.
My advice is to take the machine to Apple for a free hardware evaluation, then decide what you want to do from there.
My computer is not working, is my personal data lost?

Flashing folder with question mark (MacMini)

Hi there,
I diagnose my Mac Mini (1.83Ghz, Intel Mac) and know that the HDD is failing, so I decide to change the HDD before the HDD totally fail.
But after I change the new HDD, and trying to install the OS back to the new HDD, I get a flashing folder icon with question mark in it, when I boot it up and press on the C key to boot from CD. So I decide to take the new HDD back out, put in an external enclosure to make sure that the new HDD is not a bad one, and I can read fine with it inside the enclosure, put it back in the Mac Mini, still the same old flashing icon.
What happen? Could someone help me please?
Thanks!

Hi Everyone,
Just for future reference for anyone who encounter this same problem, the reason that I go the flashing folder with question mark is first of all, the MacMini doesn't recognize the new hard drive. No doubt about that since the hard drive has no OS and not formatted yet. Second of all, it's because I don't have the correct Installer CD put in. I didn't know if there's any difference in the Installer CD between PowerPC MacMini and Intel MacMini, but obviously there is, since the Intel MacMini doesn't recognize the PowerPC Installer CD.
After putting the correct Installer CD in, everything works just the way it should.
Thanks for all your help, everyone!
- NyCCD

Help! White screen with gray folder with question mark

Help, my macbook always shows this white screen with gray folder with question mark after turning it on.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Hard drive crash? Folder with question mark

Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?

That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
If it is a bare drive like this:
You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
The question mark folder indicates your Mac cannot find a system folder to boot from.
A flashing question mark appears when you start your Mac

I powered up my macbook and there is a file folder with question mark on the screen flashing. What does that mean?

Powered up Mac book and screen showing file folder with question mark flashing?

A flashing question mark appears when you start your Mac
Hope that solves your issue.

Icon Folder with question mark

Similar Messages

Maybe you are looking for