Icon not displaying in Report Output

hi,
I have program which i m using
PERFORM set_expcol(rsaqexce) USING %alv pb%exco.
CALL FUNCTION 'ICON_CREATE'
       EXPORTING
         NAME                        = icon_data_area_expand
       TEXT                        = ' '
        INFO                         = text-200
       ADD_STDINF                  = 'X'
       IMPORTING
         RESULT                      = button
     EXCEPTIONS
       ICON_NOT_FOUND              = 1
       OUTPUTFIELD_TOO_SHORT       = 2
       OTHERS                      = 3
icon_data_area_expand = @K1@
Button: @K1\QExpand@
Because of this icon is displaying with the text @K1\QExpand@

Hi,
I think u r using PF-STATUS parameter in function module,
if u use this parameter, you sholud give the icon name etc..
otherwise by default it will appear.
Check your code again.
Give me exact requirement, if possible paste the code.
Regards,
Chandu

Similar Messages

Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

IPhoto event icons not displaying in chronological order. How do I fix?

iPhoto event icons not displaying in chronological order. How do I fix?

Have you explored the options under the View -> Sort Events menu?
Regards
TD

My code not give error nut not give pdf report output

hi master
sir see my code not give error nut not give pdf report output
String reportSource = "./WEB-INF/reports/mfa.jasper";
String reportDest = "./reports/mfa1.html";
Connection conn = null ;
Statement msqlStatement = null ;
ResultSet mrs = null ;
Connection mconn = null ;
ExternalContext econtext = getExternalContext();
InputStream stream = econtext.getResourceAsStream(reportSource);
if (stream == null) {
throw new IllegalArgumentException("Unknown report name '" + reportSource
+ "' requested");
try {
String mfat = ac_categoryDataProvider.getCachedRowSet().getDataSourceName();
javax.naming.Context mctx = new javax.naming.InitialContext() ;
DataSource mds = (DataSource)mctx.lookup(mfat);
Connection mcon= mds.getConnection();
mcon.setAutoCommit(false) ;
JasperPrint jasperPrint = null;
//getSessionBean1().getTripRowSet(),
//getSessionBean1().getAc_categoryRowSet(), mfat getSessionBean1().getAc_categoryRowSet()
jasperPrint = JasperFillManager.fillReport(stream, null,mcon);
JRExporter exporter = null;
HttpServletResponse response = (HttpServletResponse)econtext.getResponse();
FacesContext fcontext = FacesContext.getCurrentInstance();
exporter = new JRPdfExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM,
response.getOutputStream());
exporter.exportReport();
fcontext.responseComplete();
} catch (Exception ex) {
log(" Error Description" , ex);
error("Error counting rows: " + ex.getMessage() );
error("Error counting rows: " + ex );
please give me idea
thank's
aamir

Thanks Sven.
The query works but the other way. The output is for all the targets, not for the respective target which we select from :p1_target.
select target_name,target_type, column_label,
warning_threshold,critical_threshold,occurrence_count
from sysman.MGMT$TARGET_METRIC_SETTINGS@crmodem
where target_name in (select MEMBER_TARGET_NAME from MGMT$TARGET_FLAT_MEMBERS@crmodem
where upper(AGGREGATE_TARGET_NAME) like '%X' || :P1_TARGET || '%')
Thanks again.

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

Formula not displaying in report

Hi ,
I have used the NODIM data function in my formula and now the report is not displaying the formula column in report in first screen. I have to select the filter value from structure.
I have already made the formula as Always show , still its not displaying.
I have tried creating the CKF and that too is not displaying in report in first screen. I always have to select it from filter.
What could be the reason..? Are there any query setting I am missing..?
When I use the KF , it is displaying properly.
Please help.

HI,
AS YOU SAID U R CREATING FORMULA USING NODIM FUNCTION IF U R CREATING AT INFOPROVIDER LEVEL THAT IS CALULATED KEY FIGURE , AFTER CREATING CKF U JUST DRAG CREATED CKF TO COLUMNS AREA AND SAVE AND EXECUTE, ITS DISPLAYS THE KEYFIGURES. U ARE JUST CREATING FORMULA FOR KEYFIGURE NOT CHARACTERISTIC SO NOT THOUGHT OF FILTERS.
HOPE THIS HELPS .
Regards,
supriya.

AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

Hi experts,
I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
thanks nd regards,
venkat

Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
However on repoeting side, you can restrict the values to # and exclude everything from slection. But not good solution as such.
Regards
Pankaj

Wirless icon not displaying, but says I am connected to network

I am a new Iphone user, so I apologize is this a rookie questions. I believe I am connected to my house wireless connected as the name of my network is checked off when I go to settings and Wifi.
My question is, though, why is my icon not displaying on the top left corner? It displays when I am connected at work and everywhere else I was able to connect. Is there something in my settings that I may have checked?
And, does that mean I am not really connected wirelessly?
Thanks in advance for your help!

Thanks, all. So, I just rebooted and there was no change.
Then, as SteveCWatkings recommended, I went into my settings page. I went into the properties page, and there isn't anything listed beside IP address, Subnet Mask, Router, DNS, etc. They are all empty...
*UPDATE*
Okay, something just happened. AS I WAS RESPONDING, I was clicking on each of the fields (IP address, Subnet, etc to see if I could enter information since they were empty. And,when I got to DNS, it allowed me to type something in. Not knowing what to enter, I clicked back and it took me back to the Settings page. So, I clicked on my network again and when I tapped my network, all the fields were filled in, and the icon appeared.
So, now it appears to be connected. I don't know if it will remain connected, or if I had to tap something (DNS?) or if it was glitch, but it appears to be working now.
Thanks a ton!

Field of character length 255 not displaying in ALV output

Dear all,
i am trying to display a field of ztable with lenght 255 character, same is not displaying at ALV output.
it is displaying only upto 128 characters in ALV output.
table is Ztable-zfield with CHAR255 length.
please help me.
Regards,
Sam.

Hi Sam Johny,
In ALV Grid the maximum characters can be displayed in one column is 128 Characters..
But for your solution you can press Print Preview Button to view more text(or Press Ctrl + Shift + F10 )...
Else try with ALV LIST
and pass FIELDCAT-OUTPUTLEN = '255' for field in fieldcatalog
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Selection Variables display in report output using BEX ANALYSER 7.0

HI All,
I am using BEX Analyzer 7.0 , I want to display the Variables selected in the selection screen, to be printed in the
Report Output.when i execute the same query in 3.5 , i am getting all hard coded and selected variable values in report output.
But in 7.0 analyzer i am not getting any filter values.can i know the reason for this ? do i need to do any settings ? how to display all filter values in report output.
Thanks and Regards,
Joseph

Hi Joseph,
I feel there might be personalization of variables.
After executing the query click on "Change Variable Values" which is on Bex Tool Bar and there click on personaliztion icon and check if any personalizations are there.
Regards
Ravi

Can not display BI report in Web ui

I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
How does the the connection between BI and crm works?
Please advise

Hi Experts,
We are using Webiu 2007 with BI 7.
We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM. I have done the following steps in CRM
1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
2) Assigned this reporting profile to business role
3) I selected My-Top-5 quotation report and gave the BI system in display bi reports
4) I can see the report on webui.
Problem: When I selected the report, a logon pad appears and I enter RWT user id and password, it's doing nothing. But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word. But, we can logon to GUI RWT.
We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys.
1) I created the report with object key and type as one for 3.x template and one for 3.x query view
2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
3) When I select any of these, it taking to a blank screen without any logon screen.
BW team says that these reports are running with data in their system.
Can someone please help?

Values for htmldb_item.text field do not display in CSV output

HTML DB experts,
I have a report query with the following 2 items in the SELECT statement:
wwv_flow_item.display_and_save(2, DOC_CD, 10) DOC_CD,
htmldb_item.text(3, DOC_DESC, 50, 255) DOC_DESC
I have enabled the CSV output for this report. The problem is, when I generate a csv file, only the DOC_CD (wwv_flow_item.display_and_save) displays. The values for the DOC_DESC (htmldb_item.text) do not display. What do I need to do to get the DOC_DESC to display?
Thanks for your help.
Message was edited by:
[email protected]

Items rendered using htmldb_item generate HTML tags on the form, not plain text. You are right, the CSV export excludes them.
Your best best is to create another report region on some other page with the same query except replace all the htmldb_item() calls with regular columns i.e. make it a read-only report and use the "export: CSV" template and put up a link to this page at the bottom of your editable report (instead of the builtin CSV link). This way when you click on this link, it will generate your report and immediately offer to export it to CSV
Hope this helps.

2 structures in the column,structure not displaying in the output(RSRT)

Hello BI Folks,
           I have a requirement where the user enters the input(text variable)
say 03/2011 then the report output should be Jan,Feb,Mar.
say 05/2011 then the output should be Jan,Feb,Mar,Apr,May,likewise.
The report output should be:(if the text variable is---02/2011)
Brand          Jan              Feb                     Mar                      April                      May                       June                  July                 Aug             Sept           Oct                Nov           Dec
          Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc Sales Foc
A      455    56     38
B                03     32
C
D       90      2      75     69
I am acheievin this by using creating 2 structures in the columns.
1 structure is for jan-dec & another structure for the KPIs(sales,FOC).
I am writing customer exit to read the text variable & get the data for the variable read.
lo_year = sy-datum+0(4).
lmon =sy-datum+4(2).
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'text_variable'.
l_s_range-low = loc_var_range-low.
ln_value = l_s_range-low+4(2).
DO ln_value TIMES.
l_counter = l_counter + 1.
CONCATENATE 'customer_exit_mons' l_counter INTO lv_text.
CASE i_vnam.
    WHEN lv_text.
      IF i_step = 2.
        CONCATENATE lo_year lmon '01' INTO lv_startdate.
     ** Call a function module to arrive the enddate.
        CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
          EXPORTING
            day_in            = lv_startdate
          IMPORTING
            last_day_of_month = lv_enddate.
        l_s_range-low = lv_startdate.
        l_s_range-high = lv_enddate.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        CLEAR l_s_range.
      ENDIF.                                                "End IF
ENDCASE.                                                  " End Case
lmon = lmon + 1.
ENDDO.                                                       " End of Do loop
CLEAR: ln_value , lv_text .
The problem is i am not getting the query ouput atleast not the query structure.Is there any other way to achieve this type of output.
Note:--The text variable wil be based on 0calmonth.
           The custmer exit variables Jan-dec is based on 0calday.
Edited by: shreyaJ on Nov 18, 2011 11:49 AM

Hi crazymatts,
Thanks for ur reply.
There is no data in the text variable (0CALMONTH).
But i think the structure atleast gets displayed in the output,am not gettin even that.
And there is no reference characteristics on the text variable.Its a manual input variable which i will be using in my code.
Thanks,
Shreya J.
Edited by: shreyaJ on Nov 23, 2011 8:12 AM

Icon not displaying in Report Output

Similar Messages

Maybe you are looking for