Icon replace fails for Adobe InDesign CS4

I have Adobe CS4, and I'm trying to replace the app icon for each application. I used instructions I found on the Apple website, and they worked for other programs (Photoshop and Illustrator), but not for InDesign. When I open the Get Info window for InDesign, select the icon, and try and paste in the new one, nothing happens. Any thoughts? Thank you in advance.

http://prodesigntools.com/tag/ddl

Similar Messages

  • Download appears corrupted - installation failed for Adobe Indesign - I have tried at least 6 times on different days. Please help?

    Download appears corrupted - installation failed for Adobe Indesign - I have tried at least 6 times on different days.
    And I really need to try sort this out ASAP.
    Please help?

    Gez7 do you receive any specific errors?  Please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html which discusses several common errors and steps to resolve them.

  • Installation failed for Adobe Indesign CC, please help

    Here is the error:
    Exit Code: 6 Please see specific errors below for troubleshooting.
    For example,  ERROR: DF012, DF024 ...   -------------------------------------- Summary --------------------------------------  -
    0 fatal error(s), 8 error(s)    -----------
    Payload: Recommended Common Fonts Installation 3.0.0.0 {4574D206-D61E-4555-B146-A16B01985E0B} -----------  ERROR: DF012: Unable to find file(Seq 61)  ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\SourceSansPro-Black.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 61)  -----------
    Payload: Recommended Common Fonts Installation x64 3.0.0.0 {9CA50986-FAD4-48DC-8362-1C2E201900BE} -----------  ERROR: DF012: Unable to find file(Seq 62)  ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\SourceSansPro-Black.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 62)  -----------
    Payload: Required Common Fonts Installation 3.0.0.0 {2A5D70AD-E4C3-4C3D-A18F-38B1CA51CE47} -----------  ERROR: DF012: Unable to find file(Seq 42)  ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\MyriadHebrew-It.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 42)  -----------
    Payload: Required Common Fonts Installation x64 3.0.0.0 {FDA0F184-FB72-47E7-A8DB-FF7D25E8BF8C} -----------  ERROR: DF012: Unable to find file(Seq 43)  ERROR: DF024: Unable to preserve original file at "C:\Windows\Fonts\MyriadHebrew-It.otf" Error 32 The process cannot access the file because it is being used by another process.(Seq 43)

    I've got these error when trying to open Indesign
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: InDesign.exe
      Application Version: 9.0.0.244
      Application Timestamp: 5176f4c7
      Fault Module Name: MSVCR100.dll
      Fault Module Version: 10.0.40219.325
      Fault Module Timestamp: 4df2bcac
      Exception Code: 40000015
      Exception Offset: 00000000000761c9
      OS Version: 6.1.7601.2.1.0.256.48
      Locale ID: 3081
      Additional Information 1: 6bc2
      Additional Information 2: 6bc2302ebd14cb68acdfe8af49d985f0
      Additional Information 3: 097b
      Additional Information 4: 097b424910bfb8087fe3c75fcda228e1
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

  • Download link for adobe indesign cs4 and cs5. I need to reinstall both versions

    I purchased both versions in the past. I still have the licence codes but need the download links.
    Please forward them to me or give me the telephone number of someone at adobe who can help. THanks

    http://prodesigntools.com/tag/ddl

  • You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

    A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8.  After what appears to be a successful installati
    on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
    architecture" comes up".  Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
    should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
    rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
    ation" when launching afterwards.  The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
    Following this I am told to run the CS4 Cleanup Utility.  I restart the computer each and every time after running each of the utili
    ties.  Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
    r.  When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
    n CS4" because it is not supported on this architecture" comes up".  Followed KB404711 article and no success.  What else can be don
    e to fix this issue?
    This morning contacted Adobe Support regarding this response:
    After having a detailed reserach on your issue i acme to the conclusion
    that the problem you are having is not related to Adobe software but its
    in fact related to your MAC version ( OSX-5.8). While reseraching your
    issue i came across
    to many forums where a lot of postings were about the similar error but
    with different products the only comon thing was all the Errors were
    with Mac machine , also when you check the system requirements  for
    Adobe Indesign Cs4
    by going to the following link
    http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE  you
    will find the Mac OS version supported are from Mac OS X
    v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
    to advise to you to either contact your system manufacturer or upgrade
    to Snow Leopard ( mac os x 10.6)
    I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response.  In the meantime I decided to see what the Support Forums can do for me.  Until then I am down.  Thanks for the help.

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • Where do I find Adobe Indesign cs4?

    I am wondering if I need to pay for Adobe Indesign cs4 or is it part of my Acrobat Pro Subscription?
    Thanks

    Hi Christopher,
    Indesign CS4 is not a part of Acrobat Pro subscription. It is a different product altogather.
    You need to buy it separately.
    Let me know if you have any other question.
    Regards,
    ~Pranav

  • I'm trying to download the trial for adobe indesign but it keeps failing and saying 'download error, please try again or contact customer support (49)' Can anyone help? I'm using a laptop on windows 8

    I'm trying to download the trial for adobe indesign but it keeps failing and saying 'download error, please try again or contact customer support (49)' Can anyone help? I'm using a laptop on windows 8

    Rachelh20713544 for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • Mac Plug-ins for Adobe indesign CS5

    Hi all,
    I am making new  Indesign CS5  plug-ins for Mac os.
    build my project and i get error "Developer/usr/bin/gcc-4.0 failed with exit code 1"
    what it mean error "exit code 1"?
    and I am work on porting of Adobe Indesign CS4 to CS5 plugIns for Mac Os,What Project Settings required Xcode for build code succesfully?
    Pls kindly help me out from this problem.
    Thanks  a lot:

    I build samples project its working fine for that.
    I use  xcode Version 3.1.3
    Component versions
    Xcode IDE: 1191.0
    Xcode Core: 1192.0
    ToolSupport: 1186.
    are you set any path, inside Project Settings before compile your project?
    like "jni" releated path.

  • Missing font makes Adobe InDesign CS4 6.0.4 crash

    Hi!
    I am having a problem with the latest version of Adobe InDesign CS4 (v 6.0.4).
    I opened an old document which contained two missing fonts.
    I was able to correct the first one by changing it to an existing font.
    But when I tried to correct the second one, the application crashed.
    I did this:
    1. Opened the document with the missing font (the first font was now already corrected).
    2. In the warning dialog window saying a font was missing, I clicked "Find Font".
    3. The missing font was called "Helvetica (T1) Bold Narrow". I set it to be replaced by "Helvetica Regular".
    4. Then I clicked "Change All".
    5. Indesign CS4 crashes.
    This is the information about the missing font (note that it says "First Used: na" which is strange):
    Filename: <not installed>
    Full Name: Helvetica
    First Used: NA
    Font: Helvetica (T1) Bold Narrow
    PostScript Name: Helvetica-Narrow-Bold
    Style: Bold Narrow
    Type: Type 1
    Version: 
    Restrictions: Unkonwn (Font is missing)
    Path: Unknown (Font is missing)
    Character Count: 27
    Style Count: 0
    Styles: 
    Page: none
    Does anyone have a solution, or is this a bug?
    Thanks

    Hi! Thanks for your answer.
    I am using Windows XP (SP3).
    I tried to export my INDD file (ID CS4 format) to an INX file.
    But that also made InDesign crash (perhaps because of the font thing).
    Unfortunately I can't change the missing font of the text because:
    * I can't see the text frame that contains the missing font.
    * InDesign crashes when using the "Find Font" function.
    However, this is not a big problem, I can still work with the file. But I will
    always get the annoying warning about the missing font, and I prefer to
    have no errors in my INDD files.

  • Adobe InDesign CS4 Debug WIN Installation

    I need to port an InDesign CS3 plugin to InDesign CS4. In order to do that I've installed the Adobe InDesign CS4 Debug WIN but when I'm trying to start the application I receive the following error message in German: "Diese Anwendung konnte nicht gestartet werden, weil die Anwendungskonfiguration nicht korrekt ist. Zur Problembehebung sollten Sie die Anwendung neu installieren.". In english this should mean something like "This application has failed to start because the application configuration is incorrect. Try to reinstall the application.".
    The box I've tried installing on has visual studio C++ 2005 SP1 and InDesign CS3 Debug already installed (which works fine). I've looked through the requirements in the "InDesign® CS4 Read Me" and couldn't find anything that I'm missing.
    Any ideas?
    Thanks in advance.

    Hi Folks,
    ID CS4 Debug and ID CS3 Debug can be installed on the same system. The likely reason that the CS4 version is giving that error is because the CS4 version needs some Visual Studio 2005 SP1 DLLs that aren't installed on the computer.
    I believe that there are a couple of ways to fix this. One is to install Visual Studio 2005 SP1 (the recommended setup for CS4 plug-in development). When you install SP1 the DLLs needed by ID CS4 Debug will be installed. The other way, I think, is to not SP1, but install the release version of ID CS4 on your system. I understand that the ID CS4 Release version installer will install the DLLs needed by the debug version.
    However, if you use VS2005 (no SP1 installed) for CS4 plug-in development you will not be using the recommended development environment for CS4. But if you install SP1, and you want to develop plug-ins for CS3, you will not be using the recommended development environment for CS3 plug-in development. Go figure.
    Please note that once you install VS2005 SP1, any plug-ins that you compile will be looking for the SP1 version of the C/C++ Runtime DLLs when the plug-in is launched. The needed DLLs will be on your development system, so everything will seem fine when you test your CS3 plug-ins on your development computer. But when the plug-in is launched on a machine without the SP1 DLLs installed, the plug-in will not run.
    I'm not sure of the best way to deal with this (I'm mainly a Mac guy), but there was a thread here entitled
    Visual Studio 2005 SP1 about this issue a while back. This thread was partially deleted due to a forum software problem, and one of the ideas that was mentioned was lost from the message thread. Below are the useful (IMHO) missing messages (sent to me by Dirk Becker), who follows the forum using email.
    [Ugh! I told Dirk I would write up a Wiki entry for this, but work happened and I haven't gotten to this yet. :-( ]
    =========
    MISSING MESSAGES FROM THE THREAD: "[IDCS3 WIN] Visual Studio 2005 SP1"
    =========
    FROM: Eugenio Andres
    Hi Jim,
    From your original error message, the problem is most likely with the installation of the C/C++ SP1 runtime DLL on the machine that does not have the compiler. It's not so simple nowadays as copying over the DLLs, because Microsoft invented the side-by-side system, that allows having several versions of the same file on one machine.
    Your options are installing the runtime on each machine (a package for that is available from Microsoft Download) or changing your project to the static runtime ("Multithreaded" instead of "Multithreaded DLL"). I always use static linking in plugins with no problems, although Adobe specifies dynamic in their instructions, but you avoid these "DLL hell" problems.
    Regards,
    Eugenio Andres - www.ExpertosInformaticos.com
    =====
    =====
    FROM: Jim Birkenseer
    Hi Eugenio,
    Thanks for the information.
    So, are you saying that I simply have to go into my Plug-In's property page in VS2005 SP1 and change the C/C++ Code Generation from Multi-threaded DLL (/MD) to Multi-threaded (/MT) and rebuild the project? What are the downsides of doing this--or are there any?
    <...SNIP...>
    -- Jim
    =========
    =========
    FROM: Eugenio Andres
    Hi Jim,
    You're welcome.
    Yes, that project change should do it. The difference is that with the "DLL" version, your plugin loads the C/C++ runtime shared library (DLL) at runtime and calls it for any needed functions (like strcpy, malloc, etc.). Without the "DLL", the linker puts the C/C++ runtime code directly into your plugin and you don't need the C/C++ runtime SP1 DLL (the error you're getting is because your plugin required the DLL and it's not found on that machine).
    The C++ SP1 runtime shared library is different from the C++ non-SP1 library InDesign uses. In this new Windows "side-by-side" scheme, both can live together.
    If you use the exact same C/C++ runtime that Adobe uses, then that library is physically shared and it allows to do some "risky" things as e.g. allocating memory in one module (e.g. InDesign) and freeing it in another (e.g. your plugin). But this is usually not recommended and I don't think Adobe is doing it (but then it's only my impression from the code structure).
    Anyhow, from the moment you use the SP1 compiler, you're not sharing the runtime any more with InDesign, so it doesn't matter if you compile "MultiThreaded" instead of "MultiThreaded DLL". The difference between these is the size of the plugin and the easyness of distribution, and without DLL you miss possible "automatic" updates of the C++ runtime DLL (because the C/C++ runtime code is embedded in your plugin), but lately new versions of the C/C++ runtime become "different" DLLs, as you can see, so that's not so relevant any more - or if it's critical, you can always recompile your plugin and redistribute if needed.
    You can find a brief description of SP1 in
    http://msdn2.microsoft.com/en-us/vstudio/aa718695.aspx
    It looks like minor non-breaking changes to me, but one never knows...
    Cheers,
    Eugenio Andres - www.ExpertosInformaticos.com

  • Adobe InDesign CS4 + Mathtype, ps2pdf conversion problem

    Dear All,
    We have typset the pages using the Adobe InDesign CS4 + MathType 6.0 using the Macintosh. We are facing the problem PS to PDF converion, the error message is:
    %%[ Error: typecheck; OffendingCommand: makefont ]%%
    Stack:
    [185.0 0.0 0.0 -185.0 0.0 0.0]
    -file-
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    The fonts were used on the Math is Euclid Symbol. Whereas, my deliverable product is application file, equations, images and PDF (which converted using their distiller setting). It would be great if any one can suggest how to overcome this problem!
    Thanks
    Gunasekaran

    I don't remember seeing this exact problem, but I've had numerous issues with Indesign CS4 / MathType. (Though it really blew up in CS5, which no longer recognizes the obliqued Symbol font used by MathType, and replaces it with a generic font). Design Science told me that their next update -- which is waiting on the next update to MS Word for Mac, originally due this fall -- would fix the problems, and I wish them much luck.
    First, I'd try Exporting to PDF rather than going through a PS file stage. It's generally more reliable.
    I'd also clean out the font caches from Indesign CS.
    If that doesn't work, examine your computer closely for different versions of the Symbol font. There's probably one in the system library from Apple, one or two in your User library (like the Truetype and Postscript versions that came with MathType), maybe one a gift from Microsoft, and probably one in the Adobe applications folders as well. Unfortunately, they're all slightly different. Conflicts between these may be causing your trouble. Delete or remove all but one, and see if your applications still run -- you probably want to open and save each equation from MathType using the "new" font, then update links in Indesign after each change, so working on a test document with one equation would be best. If one font works, stick with that one.
    I'm sincerely hoping that in the next version of MathType we'll be able to use OpenType fonts for the Greek characters -- Symbol has gotten pretty buggy over the years.

  • I can't open *.indd files in Adobe InDesign CS4

    I've just installed the trial version of Adobe Indesign CS4 and I cannot open my *.indd files which contain my business brochures etc.
    How can they be opened?
    Operating system:  Windows XP pro SP3.
    Processor: Intel E8400, Gigabyte P35 Chipset with 4Gb RAM.
    Thank you for your help.
    Tim

    Hi, I've tried double clicking as one would normally do and I get the error message:
    Cannot open "filename.indd"
    The files were created in Adobe InDesign by a company that specialises in brochure design and they kindly gave me the files they originally created (to be printed by a professional printer) so that I could make some minor modifications (for the next run from the professional printer), using my trial copy of Adobe InDesign.
    I know that this company uses a Mac operating system but I don't know which version of InDesign they use. I shall ask them if this is relevant (which I guess it will be!).
    Tim

  • Adobe InDesign CS4 Stops Working - Windows 7 Ultimate

    I have a new computer with 8g of Ram running Windows 7 Ultimate, with an Intel i7 860 2.8 and everything has been working fine until an hour ago and now everytime I open InDesign and start working on a file, I get the error message that Windows has to close InDesign that it is not working properly.
    I went ahead and made sure I had the latest updates, I removed the Preference file, rebooted and I am still having this same problem.
    I also get a message when I start InDesign and Illustrator that I have to restart FMCore.exe has been stopped. Please start it form the Windows Control Panel for Universal Type Client and then relaunch Adobe InDesign CS4. I click OK and InDesign opens. I cannot find anywhere to start the FMCore.exe. I think it applies to a Mac computer.
    Any help from anyone would be greatly appreciated. I may trying reinstalling InDesign CS4 but I am not sure if I should do so.
    All the best,
    Aleda Downs

    Hi Peter:
    I think the crash may be related to this file. When I opened another file and moved around InDesign acted fine. It appears that is crashes with this one file that I have been working on all day.
    Any suggestions before I do a system restore, as to how to repair a file? The file keeps opening, but when I try to access a menu item or navigate to a different page, that is when I get the error. On the other file, I did everything and not a problem. I think it might be this file.
    Any thoughts?
    All the best,
    Aleda

  • Adobe Indesign CS4

    I am a member of academic staff and purchased (the university purchased it for me - London Metropolitan University, London, England) Adobe Indesign CS4.  The serial number is: [deleted by moderator].  I uploaded this software from a disc onto my laptop.  I have used it successfully.  I now need to transfer this software from my laptop to my main PC (this is NOT any kind of ownership transfer).  Can I just copy it via a portable hard-drive?  Should I upload the disc software again onto the main PC?  Can I do this?
    I have transfered the software onto the hard-drive but it will only open if it is pluggged into the original laptop.
    I look forward to answers please

    NEVER post a serial number.
    If you're going to use it on both machines then just install it from the disk. If you're done with laptop, open InDesign and choose help>deactivate.

  • CS4 "You cannot open the application Adobe InDesign CS4 because it is not supported on this archit

    Just installed CS4. Ai and Ps open fine. i get this prompt with InDesign.
    You cannot open the application Adobe InDesign CS4 because it is not supported on this architecture.
    any clues on how resolve this?
    thanks!

    I'm having exactly the same problem with InDesign from CS4 Design Standard (Photoshop and Illustrator both work), and I don't know what to do. I've called up the Adobe support line five times, and received five different answers, none of which have worked (and on three other occasions, my call was dropped, once after an hour on hold).
    One of the Adobe tech support people said to me "None of CS4 works with either 10.5.8 or Snow Leopard. We will issue a patch for that soon" - which directly contradicts what Adobe itself says on this site. I also went to see a Mac Genius, who couldn't help either.
    I have a 2GHz Macbook with 2GB RAM running 10.5.8. I've run the uninstall, and the Adobe Clean Script, I've repaired permissions on my drive (which isn't case sensitive), restarted, reinstalled, tried installing on an external drive and then tried downloading the trial, in case it's the install CD - nothing works. 
    Any suggestions, anyone? Might there be a problem with my library that is stopping the install? Something else?? I bought CS4 for InDesign primarily, this is not good.

Maybe you are looking for