Icon-Start Chart one level above Nakisa OrgChart 4.1 Live

Hello
In relation to the problem specified by Sakthi Seithur: "Icon-Start Chart one level above Nakisa OrgChart 3.0SP3 Live" we have a similar problem but this time it's on version 4.1.
We have upgraded from version 3.0 SP3 to 4.1. Previously we made use of the "AllowUpLevelForRootTypeUser" trick in version 3.0 sp3 to get the icon to appear. However, now in version 4.1 the problem is back and the "AllowUpLevelForRootTypeUser" trick doesn't seem to have any effect.
Does anyone have insight into this problem on version 4.1?

Richard,
I had this same issue on 4.0. It worked then didn't after a build update (to #437 on 4.0). My client raised an OSS and (finally!) today it got an update ... they issued a new build ("0901052300" i.e. #532 on 4.0 version) to resolve the issue.
I wonder/suspect that the issue might be also in the 4.1 release. I would raise an OSS to ask whether this is a known issue in 4.1 and also specify your full build number (long one on the AdminConsole screen once you've logged in and loaded a build).  Hopefully they have a newer build with it fixed or can test on your build version to replicate the issue.
Regards,
Stephen

Similar Messages

  • Hi, never used support before - here goes! My Mac G4 MDD no longer shows the start up hard drive icon. The one with all my files on! It shows the other 3 hard drive icons and boots up OK. Has my start up hard drive failed? Can it be fixed? Thanks.

    Hi, never used support before - here goes!
    My Mac G4 MDD no longer shows the start up hard drive icon. The one with all my files on!
    It shows the other 3 hard drive icons and boots up OK.
    Has my start up hard drive failed? Can it be fixed?
    Thanks.
    Machine Name: Power Mac G4
      Machine Model: PowerMac3,6
      CPU Type: PowerPC G4  (3.2)
      Number Of CPUs: 2
      CPU Speed: 1.25 GHz
      L2 Cache (per CPU): 256 KB
      L3 Cache (per CPU): 1 MB
      Memory: 2 GB
      Bus Speed: 167 MHz
      Boot ROM Version: 4.5.7f1

    Doesn't sound like any hard drive failure to me - more a Finder preference.
    Finder -> Preferences -> General -> Show these items on the desktop -> Hard disks
    The startup disk is sometimes treated differently from other disks (such as external and network disks) and I'm guessing this is a simple preference setting, although I might be wrong.

  • Dynamic rooting (User Record) setting is not working in Nakisa OrgChart SP3

    Dear All
    The Dynamic rooting setting is not working in the Nakisa OrgChart SP3.
    It is giving an error message - "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date."
    We followed the same steps as given in the Admin guide of SP3 (P.no. 109 - shown below)
    In Orgchart --> General Settings:
    * Select the Org chart root value source.
    User Record: Retrieves the record specified in the next step from the employee data element.
    *Do one of the following to define the org chart root:
    If User Record was selected in the previous step, select the field containing the ID of the required organizational object in the employee data element from the User record field drop-down list. For example, if you wish to root the org chart at the org unit of the logged-in user, select the field containing the org unit ID. Hence, we have selected the Org unit ID.
    Note:
    We had enabled single sign-on with logon tickets
    Retained the standard settings in Security Settings --> Employee Source
    Had provided full authorization to the roles
    If we use the "OrgChart Root" option available in 'Orgchart root value source', the org structure gets displayed correctly from the root object defined.
    As this is an standard functionality, Kindly guide us in resolving the issue.
    Regards
    Ravindra

    Ravindra.
    You don't have to and shouldn't always include the username and password parameters for the SAP Connection string.  When you omit them it will use the user's login credentials.
    Remember though that:
    The SAPRoleMappingConnection will need them included in order to get the details for the user in the first place.
    Without the username and password specified in a connection string you can't click the option to test the connection and result in a successful connection.  Remember unable to connect does not necessarily equate to wrongly configured.
    I've filtered the log file for errors and the following entries were flagged up:
    26 Jun 2012 10:00:06 ERROR com.nakisa.Logger  - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
    26 Jun 2012 13:13:52 ERROR com.nakisa.Logger  - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
    26 Jun 2012 13:43:49 ERROR com.nakisa.Logger  - java.lang.reflect.InvocationTargetException
    26 Jun 2012 13:55:09 ERROR com.nakisa.Logger  - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
    26 Jun 2012 14:32:03 ERROR com.nakisa.Logger  - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
    26 Jun 2012 15:47:44 ERROR com.nakisa.Logger  - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
    26 Jun 2012 15:47:44 ERROR com.nakisa.Logger  - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
    26 Jun 2012 15:47:44 ERROR com.nakisa.Logger  - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
    26 Jun 2012 15:47:44 ERROR com.nakisa.Logger  - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
    26 Jun 2012 15:47:44 ERROR com.nakisa.Logger  - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
    26 Jun 2012 15:47:44 ERROR com.nakisa.Logger  - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
    26 Jun 2012 15:47:48 ERROR com.nakisa.Logger  - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
    26 Jun 2012 15:47:55 ERROR com.nakisa.Logger  - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
    26 Jun 2012 15:47:55 ERROR com.nakisa.Logger  - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
    26 Jun 2012 15:47:55 ERROR com.nakisa.Logger  - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
    At the very least it looks like SAPPositionVacancyDataElement is missing and whilst the other errors around it are unfamiliar I wonder if it might be a good first step to see if you can track down the reference to and existence of this data element?  That being said it looks like your last test occurred well over an hour after this (so you may have already resolved it) and resulted in nothing but information messages.  If that is the case it might be worth "rolling" your log file or manually trimming it to the right time frame when posting it?  Otherwise it can be misleading as people could flag up issues you have already resolved.
    So assuming you haven't tried Luke's suggestion (which should only take a couple of minutes to do) I think you should go back and do so right away .
    Regards,
    Stephen.

  • Function to fade audio smoothly from one level to another in AS2

    Greetings all.
    I'm a newcomer to Actionscript programming and trying to modify a Flash site template downloaded from TemplateMonster.com (which is an AS2 template).  I've almost succeeded at what I need to do but have run into a couple of brick walls.  One is that I've added a video player to the site and need to make the background music track smoothly fade out when the video starts and fade back in when it ends (or is stopped).  I set up a listener object for the video player that works.  It's the smooth fade of audio levels that doesn't.
    I found an excellent thread from last year (http://forums.adobe.com/message/3236495) in which kglad address the issue of fading audio from one level to another.  Since TemplateMonster's templates set up a master movie clip and then load pages to play within it, and I need to call the function from within the pages, I tried setting it up as a global function.
    So when the overall site initializes, I have this:
    this.createEmptyMovieClip("mcMusictrackHolder", this.getNextHighestDepth());
    var sndAudio:Sound = new Sound(mcMusictrackHolder);
    var nMaxMusicVolume:Number = new Number(mcMusictrackHolder);
    nMaxMusicVolume = 30;
    sndAudio.attachSound("MusicTrack");
    sndAudio.setVolume(nMaxMusicVolume);
    sndAudio.start(0,9999);
    // Here is kglad's function converted to a global function
    _global.fadeSoundF = function(mc:MovieClip,s:Sound,vol:Number,sec:Number):Void
         trace("Getting here with sound at " + s.getVolume());
         clearInterval(mc.fadeI);
         var volumeInc:Number = vol-s.getVolume()/(10*sec);
         mc.fadeI=setInterval(fadeF,100,mc,s,volumeInc,vol);
         trace("Leaving with sound at " + s.getVolume());
    function fadeF(mc:MovieClip,s:Sound,inc:Number,endVol:Number):Void
         s.setVolume(s.getVolume()+inc);
         if(Math.abs(s.getVolume-endVol)<inc)
              clearInterval(mc.fadeI);
    Then within the page that contains the video player (a child of the above), I have this:
    var listenerObject:Object = new Object();
    var sCurrentState:String;
    listenerObject.stateChange = function(eventObject:Object):Void
    sCurrentState = my_FLVPlybk.state;
    if (sCurrentState == "playing")
      fadeSoundF(_root.mcMusictrackHolder,_root.sndAudio,0,1);
    else
      fadeSoundF(_root.mcMusictrackHolder,_root.sndAudio,_root.nMaxMusicVolume,1);
    my_FLVPlybk.addEventListener("stateChange", listenerObject);
    The listener object is working fine - so if instead of calling fadeSoundF I simply do _root.sndAudio.setvolume(0) to mute and _root.sndAudio.setvolume(30) to restore it works fine except that the volume changes abruptly instead of ramping.
    But obviously there's a problem with my effort to convert kglad's function to global and use it that way, because the trace statements tell me the audio is getting set to random levels.  It smoothly ramps all right - but tries to get to -472 or +8212 or other insane numbers.
    Any help with where I'm going wrong would be deeply appreciated.  Keep in mind that although I have some long-ago programming experience in other languages, this environment is completely alien to me and you can feel free to assume I'm completely ignorant.  What I've managed to piece together is largely pulled from online research, which is why there's probably an obvious glaring error in there.  Feel free to provide a response that assumes I know nothing.
    Best,
    Pete

    I added a few more traces.  Here's the new main page:
    this.createEmptyMovieClip("mcMusictrackHolder", this.getNextHighestDepth());
    var sndAudio:Sound = new Sound(mcMusictrackHolder);
    var nMaxMusicVolume:Number = 30;
    sndAudio.attachSound("MusicTrack");
    sndAudio.setVolume(nMaxMusicVolume);
    sndAudio.start(0,99999);
    _global.fadeSoundF = function(mc:MovieClip,s:Sound,vol:Number,sec:Number):Void
              trace("Getting here with level at " + sndAudio.getVolume());
              trace("asking to set it to " + vol + " in " + sec + " second(s).");
              clearInterval(mc.fadeI);
              var volumeInc:Number = vol-s.getVolume()/(10*sec);
              mc.fadeI=setInterval(fadeF,100,mc,s,volumeInc,vol);
              trace("Leaving with sound at " + sndAudio.getVolume());
              trace(" ");
    function fadeF(mc:MovieClip,s:Sound,inc:Number,endVol:Number):Void
              s.setVolume(s.getVolume()+inc);
              if(Math.abs(s.getVolume-endVol)<inc)
                        clearInterval(mc.fadeI);
    Here's sample trace output:
    Getting here with level at 30                  <---- this is on first visiting the page where the listener object initializes and asks it to ramp the audio from its
    asking to set it to 30 in 1 second(s).             current level to the same level (probably because the video is buffering or rewinding and that counts as a state change).
    Leaving with sound at 30
    Getting here with level at 111                <---- this is a second triggering of the function (probably because the video is STOPPED and that counts as a
    asking to set it to 30 in 1 second(s).            state change after buffering).  As of yet the video hasn't been asked to play.
    Leaving with sound at 111
    Getting here with level at 3765               <---- This is what happens when the video is asked to play; since it is asking to leave the level at 30 I'm guessing it is buffering
    asking to set it to 30 in 1 second(s).              again but not playing yet, which is why it's still being asked to set the background to 30 instead of 0.
    Leaving with sound at 3765
    Getting here with level at 3765                <---- NOW the video is actually playing, so it asks to set the background audio to 0.
    asking to set it to 0 in 1 second(s).
    Leaving with sound at 3765
    Getting here with level at -41740             <---- ... and I hit STOP, which generates a request to bring the background audio back to 30.
    asking to set it to 30 in 1 second(s).
    Leaving with sound at -41740
    I should probably replace the if/else on the video player page with a switch/case so the function ONLY gets called when playback actually stops and starts, and doesn't get triggered for every state change.  But I think I still have an error in here someplace...
    Many thanks to kglad for your help!
    Pete

  • Can't fine tune scene icon starting point

    Hello.
    I have an iMovie HD project that I am finalizing in iDVD 6. It is 90 minutes long and divided into ten chapters. iDVD 6 automatically created motion icons for each of the ten chapters. For ease of editing, I have turned Motion off for now.
    I can click once on each icon, and a slider appears above it that allows me to set the starting point for that icon's movie. The problem is that I can't finely select the starting point I want. Even if I move my mouse the shortest distance possible, the video jumps by about one minute increments. Same thing when I use the right or left arrows on the keyboard. I've tried variations with the shift, control, option and command keys, but nothing worked, and iDVD Help has no solution that I can find.
    Is there any way that I can get the movie sliders to move in much smaller increments, preferably frame by frame? Thanks!

    I never found out anything on this, so I just finished the project as best I could. Now I have Final Cut, and doubt I'll use iDVD again. Good luck!
    Fred

  • How can I move an icon/file from one screen of my ipad to another?

    How can I move an icon/file from one screen on my ipad to another?

    Press and hold the icon until they start to wiggle. Then while holding it, drag it to the edge of the screen and wait for the page to switch, then let go of the app

  • Keyword management - how do you move keywords up one level?

    How do you move keywords up one level in the hierarchy? Sometimes when working quickly, keywords and subgroups of keywords get inadvertently highlighted and moved as a child under another keyword or group. I can't figure out how to move them back out again to the root level.

    I can't figure out how to move them back out again to the root level.
    You can drag and drop sub keywords to other locations higher or lower in the nested folder but you don't seem able to drag from sub level to root level.
    The easiest workaround would be to have a regular Back up of the list (pop menu from icon top right keyword panel: export keywords) and when not having added new words just use clear and import the back up to restore.
    If you did edit the list you can choose to export current list and with a simple text editor make the changes for keywords and sub keywords you want, save and then use again clear and import to retrieve the correct list.

  • PowerView option - Drill Down one level at a time also hide the columns other than the hierarchy columns

    Hi All,
    I have a simple PowerView report (Excel 2013) in which I have a hierarchy (three columns), an image column, and a Value column:
    When I change the Show Levels option to "Rows - Enable Drill Down One Level at a Time", image column also hide.
    I want to keep the image column displayed while drill down/up to the hierarchy.
    Is it possible? If yes, then how?
    Thanks & Regards,
    Muhammad Ehsan
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

    Hi Muhammad,
    According to your description, you have images at child level. Now you want to have the images displayed when have the child level items collapsed. Right?
    In this scenario, when you show the data in a matrix in Power View, those images, Size ID and Prices have been added into a child group. If we enable drill down, all the items within the child group will be collapsed. We can't change it at all in Power
    View.
    For your requirement, we suggest you design your report using SQL Server Data Tools in Reporting Services. In Reporting Services, we can have specific columns toggled by the parent item.
    Reference:
    Add drill-down to a Power View chart or matrix
    Drill-down Behaviour in Power View
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • Dashboards - More than one level deep

    Is there a way to create a Dashboards more than one-level deep. Currently I can put a Dashboard within another Dashboard (Getting the flyout menu when I select the top-level dashboard in the Interface). However, what if I want to go one level deeper? So have Dashboard Header show as the link, a flyout menu with Dashboard 1, then another flyout menu off of Dashboard 1 having the link for Dashboard 2.
    I saw this tag DashboardMaxBeforeMenu but don't know if this resolves the issue above as I tried to implement and still was not able to set up the above scenario.
    Thanks.

    Hi Mike,
    Sorry for the delay. The whole team has been busy with JavaONE for the past week.
    We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
    http://www.netbeans.org/issues/show_bug.cgi?id=103780
    The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
    http://www.netbeans.org/products/uml/
    http://uml.netbeans.org/
    Thanks,
    George

  • Files are one level too deep

    I uploaded my files to my server but they didnt show. My
    support guy said my files were one level too deep. How do I fix
    this. email me if you would like the pic of how my files are set up
    right now. The message below is what he sent me in regards to my
    problem
    Dear Rick Sepulveda,
    It appears that your files are one level too deep. You can
    see the site at
    http://profusiondesigns.net/html/
    but you want it to be
    http://profusiondesigns.net/
    so you need to move the files from /var/www/html/html/ up to
    /var/www/html/ and then you'll be all set.
    Your question was:
    how do i upload my webpages
    Reply from Jumpline.com, Inc. (Wed Nov-19-2008 23:44):
    Here's a link to our support site that includes information
    to get you started on this.
    Customer comment (Thu Dec-04-2008 03:12):
    I uploaded to my server but my new page wont display. There
    were other files in there before i trasferred mine but i cant
    delete them to start over. can you help. Attached is a pic of how
    my files look when im connected to my server.
    Thanks
    Sincerely,
    Jason Shaw
    Jumpline.com, Inc. Support Team

    What do you have in the Host Directory field of your Remote
    Site Definition?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ricksepulveda" <[email protected]> wrote in
    message
    news:gh93gf$rso$[email protected]..
    >I uploaded my files to my server but they didnt show. My
    support guy said
    >my
    > files were one level too deep. How do I fix this. email
    me if you would
    > like
    > the pic of how my files are set up right now. The
    message below is what he
    > sent
    > me in regards to my problem
    >
    > Dear Rick Sepulveda,
    >
    > It appears that your files are one level too deep. You
    can see the site at
    >
    http://profusiondesigns.net/html/
    but you want it to be
    >
    http://profusiondesigns.net/
    so you need to move the files from
    > /var/www/html/html/ up to /var/www/html/ and then you'll
    be all set.
    >
    > Your question was:
    > how do i upload my webpages
    >
    > Reply from Jumpline.com, Inc. (Wed Nov-19-2008 23:44):
    > Here's a link to our support site that includes
    information to get you
    > started
    > on this.
    >
    > Customer comment (Thu Dec-04-2008 03:12):
    > I uploaded to my server but my new page wont display.
    There were other
    > files
    > in there before i trasferred mine but i cant delete them
    to start over.
    > can you
    > help. Attached is a pic of how my files look when im
    connected to my
    > server.
    > Thanks
    >
    > Sincerely,
    > Jason Shaw
    > Jumpline.com, Inc. Support Team
    >
    >

  • While starting sun one web server error message

    i have installed sun one web server 6.1,then i tried to start it from start up menu icon "start server administration server".the command prompt just displays and goes off.then i tried to start it from command prompt by giving path
    "C:\Sun\WebServer6.1\https-pcname.com>startsvr".
    error comes like this
    C:\Sun\WebServer6.1\https-pcname.com>net start https-pcname.com Access is denied
    can any one help me to solve this .

    You most probably don't have admin priviledges required to start a service on this Windows machine.

  • TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

    My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

    This morning i was not able to hear sound on my recently purchased  macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound  box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
    Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

  • File conversion for more than one level of substructure

    I have the following file format that needs to be converted into XML, but because it has more than one level of substructure I'm not able to give the correct file conversion parameter
    source file sample:
    1headeryyyyyyyyyyyyy
    2itemsyyyyyyyyyyyyyy
    2itemsyyyyyyyyyyyyyy
    2itemsyyyyyyyyyyyyyy
    3trailer1yyyyyyyyyyyyy
    4trailer2yyyyyyyyyyyyy
    2itemsyyyyyyyyyyyyyy
    2itemsyyyyyyyyyyyyyy
    2itemsyyyyyyyyyyyyyy
    3trailer1yyyyyyyyyyyyy
    4trailer2yyyyyyyyyyyyy
    Thus you see above that there is one header followed by a bundle that conrains many items and 2 trailers and this bundle can repeat any number of time.
    Could anyone let me know how to parse this type of file to XML?
    Thanks,
    Lakshmi

    Hi Lakshmi,
    See this blog:
    <a href="/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter:///people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    []´s
    Marcelo Macedo

  • Nakisa OrgChart V3.0 SP1: Printing Issues

    Hi,
    We're using Nakisa OrgChart VSN30 SP1.
    We have a few issues about printing:
    1. Tiling. When I go to tile a large Org Chart, even though Nakisa shows the page separator lines and no margins u2013 each page does have a margin cuts out portions of the printed Org Chart. 
    2. Font for "printing/Header" and "ChartBook/Cover or Head". "Calibri" is our company's Standard font but not included in the font choices in Nakisa.
    BTW, the sector of Print and Export in Nakisa's Help Document for OrgChart VSN30 SP1 has different screenshots of "Basic Print Wizard" from what we have.
    Thanks,
    Hongling

    Hongling,
    Just to add that I had a client on 3.0 who did some very extensive testing of printing and exporting.  They too had issues using tiling that have been confirmed as not present in SP2.  I can't say for sure if your issue is or not without trying. 
    Is SP2 an option for you at this point?
    If not, then OSS seems the only way to go. 
    If SP2 is an option, then it is worth considering but you might want to seek some assurance about whether this issue is resolved first.
    Regards,
    Stephen
    P.s. By the way, did you get anywhere resolving your other print issue "different printers"? I notice it is still open on this forum.

Maybe you are looking for