Icon substitutions causing cursor to move out of data entry field

Hi,
Since installing Mountain Lion 10.8.2 I am having an issue with using substitutions in web page data entry fields in Safari (Version 6.0.1)
I use web based software for my business and enter text data in the form of standard text, substitutions which expand into words and substitutions that change to icons/special characters, for example ↑ is used when i type "pa + spacebar". Previously this was not a problem and I could enter the icon and continue on typing, however now it removes the cursor from the data entry field and if I press the space bar again it scrolls the page forcing me to mouse click on the entry field to continue typing. Very frustrating as I use alot of these special characters in my note taking.
When I use a substitution for expanding words it has no concern and allows me to continue typing.
I have tried deleting the icons/special characters and reinstating them but it still continues to take the cursor out of the entry field.
Any help in sorting this out would be greatly appreciated.
Cheers

I am having the same issue. Not just for special characters, but for any substituion. For example, a lowercase "i" into a capital "I". It's very annoying. I hope there's a fix for it.

Similar Messages

  • Find out the time sheet data entry fields

    hi
    this is satish,
              i inserted the time sheet values in the time sheet data entry view. now the my problem is where these field values store in which tables.
    thanks for all

    Hi:
    I need to transfer CATS data to FICO. I found out about transaction CAT7.
    At the moment, I have 2 issues:
    1) My CATSDB data have status "30". However, there is no corresponding entries in CATSCO. Could you tell me what I need to do to ensure that CATSCO has values?
    2) My FICO system is running on 4.6C whereas my HR system is running on ECC6.0. Can CAT7 still works?
    I appreciate your response.
    Thanks,
    Ash

  • Business Area in Contract(ES22) is blank on move-out cancellation though IC Web

    Hi expert,
    Need help in finding the root cause for the below scenario:
    During move-in through IC-Web, business area field is getting populated in ECC at contract level(ES22).
    Then we create a move-out, business area field still remains.
    But when we cancel the move-out, this business area field becomes blank.
    Business Area Field name in ES22:
    EVERD-GSBER
    I tried putting RFC trace but not able to find any relevant program.
    Please let me know if you have come across this type of issue or atleast give me some pointer?
    Appreciate your help.
    regards,
    vicky

    Check out thid badi for move out.
    ECSBTO02
    You can add user defined checks here. I think this will solve your purpose.
    Edited by: nivedita_mumbai on Mar 23, 2010 11:33 AM

  • In oracle form not to allow cursor to move ahead if value is not entered

    I have to modify an existing form in which the cursor sould not move ahead if no value is entered in the field.There are many items for that block.If no value is entered for a particular ITEM then the cursor should not move ahead on pressing the Tab key.
    Please let me know what property needs to be set for this thing to work.

    Hi
    Ok.So I have a text item...and i want the cursor not to move ahead if it is NULL.
    So which property should I change and where would I fiind this property?As i previously mentioned , if it is a not null db item the item's property > Required is set to > yes
    but if it is not a not null db item then u have 2 option set the item's property > Required is set to > yes
    or u can use the following code in When-Validate-item Trigger
    IF :BLOCK_NAME.UR_ITEM IS NULL THEN
    MESSAGE ('Pls Enter this Field it is Required');
    RAISE FORM_TRIGGER_FAILURE;
    END IF;
    Ok 1 more thing.Suppose i dont want the cursor to move back to the first field by pressing TAB
    after coming to the last field..what should be done..?u have 2 options u can choose which depends upon ur needs
    If ur block is Master Block and u want to navigate to a Detail accordingly
    Pls use the block's property > Navigation Style > change data block
    But If ur block is detail Block and u want to navigate to next record accordingly
    Pls use the block's property > Navigation Style > change Record
    Hope this helps...
    Regards,
    Abdetu...

  • ENancement in Move-Out Screen

    Hi Experts,
                    I've enhanced the Move-Out Screen with custom fields(CI_EVER). I need to populate the same in the contract (CI_EVER). But unable to do so. I'm trying the same in the exit stated below.
    How and what to set the value of Y_HANDLE to so the same ?
    FUNCTION EXIT_SAPLES20_006.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(X_VERTRAG) LIKE  EVER-VERTRAG
    *"     VALUE(X_WMODE) LIKE  REGEN-WMODE
    *"     VALUE(X_UPD_ONLINE) LIKE  REGEN-UPD_ONLINE
    *"     VALUE(X_NO_DIALOG) LIKE  REGEN-NO_DIALOG
    *"     VALUE(X_EVER) TYPE  ISU01_CONTRACT-EVER
    *"     VALUE(X_AUTO) TYPE  ISU01_CONTRACT_AUTO
    *"  EXPORTING
    *"     VALUE(Y_HANDLE) LIKE  REGEN-HANDLE
    *"  EXCEPTIONS
    *"      DATA_INCONSISTENCY
    *"      NOT_AUTHORIZED
    *"      FOREIGN_LOCK
    Documentation of the Exit:-
    The function module EXIT_SAPLES20_006 is the OPEN function module for the customer enhancement EMDK0001. This module opens the dependent object for the object enhancement. It also reads the data.
    Since the structure of the application data in the development class EE01 (master data) is not known, the data cannot be forwarded. It therefore stays in the local memory of the function group. If several instances of an object class are to be processed, a handle (an object reference) must be returned to the calling program.

    Hi,
    please see note 668345 - it describes quite good which exits need to be used. You should consider the following exits: EXIT_SAPLES20_005/EXIT_SAPLES20_004, EXIT_SAPLES20_007, EXIT_SAPLES20_008 and EXIT_SAPLES20_009. There are some FAQs answered in this note - which should be used to write data to the contract. BUT - as you are doing something at the move-out screen where usually the contract is "stopped", please see notes 593242 and 152498 for details on this.
    KR
    Uwe

  • "Some of your Quicktime software is out of date" popup

    I must have had an earlier version of quicktime installed on my computer, but I have updated to 7.2, all the patches etc.. And I get this error. I have gone as far as uninstalling all Apple components, deleting all refrences to Quiktime in the regtistry and reinstalling. The same messgae comes up in two seperate popups. The annoyance level in unbeliveable. Any assistance getting rid of these would be appreciated. I saw the question posted on the forum for an earlier release of QT and the fix was to patch it. I have even upgraded to PRO in an effort to get more support for this issue. Any assistance would be great.

    I also am plagued with this problem. In case it helps anyone to diagnose this issue, here is how it started on my computer. It showed up immediately after installing Kid Pix Deluxe 3. During the install, the Kid Pix software said that I needed to install Quicktime to run the program. Since I already had the latest iTunes/Quicktime softare (v7.4), I chose not to install it (the Kid Pix CD had Quicktime 5). When I restarted my computer, it immediately brought up the "Some of your Quicktime software is out of date..." dialog box. Ever since, programs that access Quicktime in some way cause the "...out of date..." dialog to appear. As of yet I have not seen any solution that works; the recommendations to uncheck Flash files in the MIME settings and to uncheck automatic updates did not work for me. Uninstalling Kid Pix and repairing my Quicktime and iTunes installation do not fix the problem either. I have not tried completely uninstalling and then reinstalling Quicktime and iTunes.

  • Xoom Market Your Client is out of date. it will be automatically updated shortly.

    When I click on the Market icon i get Your Client is out of date. it will be automatically updated shortly. I have had the Xoom since yesterday and registered it right away and it has been connected since then. Anyone have an idea how to solve this or how long "shortly" is?

    FWIW, I have been using the Market app every day since 2/28 with no problems at all. I never saw the message about an update being available. Application info on Market says I have version 1.0.16.  I don't know if that is the current version or not. Didn't find information on Market app software version at Market website or Android developer site. 
    Now there is one setting that I changed the first day I had the Xoom. I wanted to install the "Help Center" app I Googled up on Motorola's website, but by default the Xoom only allows installation of apps from the Market. So I went into "Settings" | "Applications" and checked "Unknown sources" in order to "Allow installation of non-Market applications".  I do not know if having this setting checked made it easier for some other service to update the Market app or not, but it is a plausible theory, since there may have been a problem with getting Market to update itself "in band" so to speak, since the Xoom was set to only allow installations from Market. Kind of a chicken-or-egg, pull yourself up by your own bootstraps kind of problem.

  • How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

    I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
    In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
    In the page class I triggered the event for WM_MOUSEMOVE as follow:
        MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
    LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
    if(TRUE == m_bIsNextBtnClicked)
    ::SetCursor(LoadCursor(NULL, IDC_WAIT));
    else
    ::SetCursor(LoadCursor(NULL, IDC_ARROW));
    return TRUE;
    This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area,  but
    this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
    LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
    ::SetCursor(LoadCursor(NULL, IDC_ARROW));
    return TRUE;
    Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e., 
     `::SetCursor(LoadCursor(NULL, IDC_WAIT));` . 
    Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e., 
        ::SetCursor(LoadCursor(NULL, IDC_ARROW)); 
    When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
    MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
    LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
    ::SetCursor(LoadCursor(NULL, IDC_ARROW));
    return 0;
    This event is not getting triggered until unless the function in the Next button event is executed.
    I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
    LRESULT OnWizardNext()
    ::SetCursor(LoadCursor(NULL, IDC_WAIT));
    m_bIsNextBtnIsClicked = TRUE;
    BOOL bRet = MyFun();
    m_bIsNextBtnIsClicked = FALSE;
    //Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
    //event is not getting triggered.But this event should get triggered and I
    //should be able to see the change of cursor within and out of client area.
    Can anyone kindly help me to solve this issue.
    SivaV

    Hello
    sivavuyyuru,
    For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I can't delete in the search/address bar on my cursor moves out of the box

    When I try to delete after typing a word in the search bar after the cursor moves out of the box I can't i have to reload the page before i can start typing again. Also happens when i just click off the box does not let me type any more without refreshing. I get a beep sound when i try to type or reload

    Clear Safari and the reset the iPad again. Settings>Safari>Clear history and website data. Now reset the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen.
    I would also reset the router by unplugging it for 30 seconds and then plug it in again.

  • How do I scroll a JTable as the selection cursor moves out-of-view?

    If a row is selected in a JTable, and the user navigates up and down using arrow keys, as the selection moves out of view, the table automatically scrolls. In my app, I am programmatically selecting rows, but if the selection is out of view, the table does not scroll. does anyone know how to achieve this? I know I could examine the position of the selected row etc. and scroll the view myself, but this seems clunky. Ideally, I would fire off KeyEvents to get the behaviour for free, but I can't see where to fire them to

    I know I could examine the position of the selected row etc. and scroll the view myselfWhy? Thats what the methods where designed for (assuming you are talking about the scrollRectToVisible(...) method).
    Ideally, I would fire off KeyEvents to get the behaviour for free,That seems clunky to me.
    When you use KeyEvents its a cause / effect relationship. That is first you use a KeyEvent to change selection. Then then if the table is at the bottom it scroll one row. So in you program if you on on row 5 and you want to select row 30, you would need to invoke 25 KeyEvents. Seems pointless to me unless you have special logice that processes every row as it gets selected.
    If you want to persue this route then you can just invoke the default actions for the up/ down/ left/ right keys. This posting should give you an idea of how to do this:
    http://forum.java.sun.com/thread.jspa?forumID=57&threadID=657819

  • CRTL + S in Excel 2010 causes the icon in the Taskbar to move to the end.

    CRTL + S in Excel 2010 causes the icon in the Taskbar to move to the end. If I just use File > Save or the Save icon in the Quick Access toolbar it doesn't cause the icon to move in the Taskbar. This is a recently change in behavior. Has anyone
    else experienced this and know how to make it stop moving?

    Hi,
    From your description, I actually understand your issue clarity. Thus, I assume your scenario, please see the below image:
    Do you mean that the Excel icon would move to the end in Windows Taskbar when you pressed Crtl+S?
    If it's correct, the issue might be caused by the keyboard shortcut conflict between Excel and some third-program. I recommend we perform the Excel with
    Windows clean boot. And check if the issue still occurs.
    If this issue not occurs with Clean boot, please check the third-party programs one by one.
    If I misunderstanding something, please feel free let us know. I'll appreciate for uploading some screenshots here.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • I Just received the update to iTunes, when I I look at the screen I do not see the normal icons.  When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

    I Just received the update to iTunes, when I I look at the screen I do not see the normal icons.  When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

    I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account?  I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

  • Move out issues

    Dear Experts,
    Can anyone explain complete move out process, while im dng move out iam getting error as no device found, no contract found,
    if is there all ready MR reason 22 exist, then if i do move out does it allow? or do i need to reverse that MR reason 22?
    can any one explain clearly.
    Cheers..

    Hi Avinsah,
    Thanks for reply, i am getting error msg as no contract found, and for some customers, no device found, can u tell reason y for this?
    and i have another big problem is, for some customers the bill doc has been generated,but while doing invoice its coming in crores, but now i cant reverse that bill cause it shows the proceeding doc was in archiving period. except changing retention period , any other option?
    i want to do move out with final bill. then its happening.
    thanks & cheers...

  • How to deactivate creation of Interim MR Result on reversal of Move-out

    Hi
    I have performed a move-out for an installation on 30.11.2008 and provided the 03 (move-out) read.
    Processing for move-out reversal has been configured in the foregound .I have reversed the move-out.
    In the move-out reversal on the meter reading tab page system shows that 03 read has been reversed.
    On the reversal of 03 (Move-out) read, system automatically created a 09 (interim read without billing)
    Is there any customization setting, which can deactivate the creation of 09 reading?
    Best Regards
    Amit Rastogi

    Hi,
    We get the same problem when we created a Periodic MRO .
    Look Device Management-> Meter Reading-> Basic Settings-> Define Control Group for Creation of Multiple MR Orders  .
    Hope it will help you !
    Michael.

  • I am going to move out for college next year, should I get my own apple ID?

    My whole family shares the same apple ID, including one sister who is already moved out. If I understand correctly only 5 computers can be associated with an apple ID. So my thoughts are that as each of my siblings and I move out over the years and eventually have our own familys we will need to associate more and more computers with whatever apple ID we are using. So, it looks like we will need to creat our own apple IDs eventually.
    So if all that is correct, I guess my question is this: How can I keep all my familys music, apps, etc. (from the account we all currently use) and set up my own account? Because it seems that if I create my own account that I will lose access to all of the stuff we have already purchased.
    Thanks for any help!

    you have to create a new one...but you cannot transfer your purchases from the old account to the new one...its not allowed because only your old account owns the music purchased

Maybe you are looking for