Icon-the specific module could not open, background contains pops up on opening firefoxwhe

recently became new fire fox customer.two items it will not open one specific site i always visit.when i click on the site in gmail to open it the whole page fades and the sys freezes i have to x out of it.
the other problems is icon when firefox opens says the specific module could not be found background contains. what does this mean.
thx

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Similar Messages

The specific module could not be found

hi,
While i am opening cube in SSDT, I am getting error like "the specific module could not be found"..pls help me to solve this issue.
Thanks
Selva

I found solution myself. i replaced DDL
C:\Program Files (x86)\Common Files\Microsoft Shared\MSDesigners8
from where Visual solution is working fine.

Error loading C:\Program Files\Common Files\ParetoLogic\UUS2\UUS.dll The specific module could not be found. What to do????

I don't know if this has anything to do with Firefox, or not. I sure would appreciate any help. Could this be why I can't download anything?

>
Efstratios Karaivazoglou wrote:
> Make sure to use CR Designer 2008 V1 (WITHOUT SP2) unless you install SP2 for BO Edge.
OK, so I will only install the BO Client Tools as well as the SAP Integration Kit. I don't necessarily need CR at this moment.
@ Raghu: we are on the base version of the BO Edge and SAP Integration Kit installation (= no SP, no FP)
EDIT:
I now installed the BusinessObjects Client Tools and the SAP Integration Kit on another PC, the error didn't occur on this PC

When Starting the computer A small screen appears with the message: RUN DLL Problem stating: \3\LXCGtime.dll..The specific module could not be found

I am an old lady...please e-mail me in understandable talk for me..I do not know too much about computers.
Would like to eliminate this small box when starting up the
computer....HELP

Hello! That DLL may be related to your Lexmark printer. You may need to remove and reinstall the software to fix that issue. Do you still have your disk for it?

Error code "The specified module could not be found"

I am getting the error code "The specified module could not be found" whenever I try to open the editor

Hi owenskier,
Please try the steps mentioned in the given link:- Error message (The Specified module could not be found) how do I fix the problem?
Let me know if this helps.
Sarika

When i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll the specific module caould not be found" i think this may be the reason why i can not open itunes store

when i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll the specific module caould not be found" i think this may be the reason why i can not open itunes store

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

SQL SERVER - Error while executing SSIS package on specific environment : Connection manager - The specified module could not be found

I have deployed my SSIS packages on SQL 2008 server.
I have a .bat file which will invoke these packages and also the bat file is placed in the server where the SSIS packages are deployed.
Scenario 1:
I double clicked on the bat file to invoke the SSIS packages and ; this executed successfully
Scenario 2:
I have used the IBM Tivoli work scheduler(TWS) to invoke the bat file which in tern will invoke the ssis packges;
but when i do this i am getting the below error
Code: 0x8007007E
Source: SSIS_Master_Event_Data_Transfer Connection manager "Config DB"
Description: The specified module could not be found.
Config BD is a connection manager which will get the connection string from the config file of the SSIS package.
Please help me to resolve this issue.
Regards,
Prakash

Check you TWS jobmanrc.cmd configuration file. You may need to add a PATH environment variable in that file that includes your SQL Server file locations. When TWS jobs are executed, they may not be executing with the same
PATH variable as when you execute the SSIS outside of TWS.

The specified module could not be found

This error box pops up when I try to open an image (the specified module could not be found) also the icon for photoshop
would not respond on the taskbar.I can open my images in other programmes,would reinstalling photoshop be a good idea.
Thanks.

Using PS cc, the problem relates to all images as they are set to open in PS, and the message appears immediately,.i have noticed that my start up screen has changed in appearance I am using a Asrock board - could be a coincidence but the problem has only started this week 08.02.15
I am using windows 7 home premium
Thanks.

"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}

I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
any help on this .........
Thanks in advance.
using System.Globalization;
using Intermec.Printer;
using System;
using System.IO;
using System.Threading;
class TestCommunicationUSBHost
static UI.Canvas _canvas;
static UI.Keypad _keypad;
static UI.Canvas.Text _exitInstruction;
static UI.Canvas.Text _appliCationTitle;
// static UI.Canvas.Text _companyname;
static string _operatorCodeValue;
static UI.Canvas.Text _operatorCodeDisplayText;
private const string operatorCodeDisplayHeader = "SCAN Code: ";
static PrintControl printControl = new PrintControl();
static Drawing drawing = new Drawing();
private static bool _isExitKeyPressed = false;
// private static Communication.USBHost _usbHost;
static int Main(string[] args)
// Init new UI canvas
_canvas = new UI.Canvas();
// Set up some colors to use
Color white = new Color(255, 255, 255, 255);
Color blue = new Color(50, 100, 150);
// Add UI black background
UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
_canvas += bg;
// Add Line
UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
_canvas += ln;
// _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
// _canvas += _companyname;
// Add UI keycode text
_exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
_canvas += _exitInstruction;
_appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
_canvas += _appliCationTitle;
_operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
_canvas += _operatorCodeDisplayText;
// Set up keypad event handler
_keypad = new UI.Keypad();
_keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
// Set up timer event handler
UI.Canvas.Timer timer = new UI.Canvas.Timer();
timer.Interval = 1000;
timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
timer.Start();
//int USBHost port o or Setup USBHost
Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
_usbHost.Open();
// Enter UI main loop
_canvas.Run();
// Cleanup UI
_canvas.Dispose();
_keypad.Dispose();
return 0;
public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
int keycode;
keycode = eventArgs.KeyChar;
if (keycode == 4)
_isExitKeyPressed = true;
return;
public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
if (_isExitKeyPressed)
UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
timer.Stop();
_canvas.Exit();
else
// Open the first USB host device and read any data sent
Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
usbHost.Open();
if (usbHost.IsOpen)
Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
FileStream fileStream = usbHost.GetStream();
try
int timeout = 0;
int i;
while (timeout < 5)
// Console.WriteLine("Exiting in {0} secs", 10 - timeout);
Byte[] bytes = new Byte[256];
if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
// string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
_operatorCodeValue = data;
// _operatorCodeValue = _operatorCodeValue + data;
_operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
int leftCordinate = 40;
drawing.Clear();
Drawing.Text line1Text = new Drawing.Text();
line1Text.Point = new Point(leftCordinate + 30, 40);
line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
line1Text.Height = 18;
line1Text.FontName = "CG Times Bold";
drawing += line1Text;
drawing.PartialRendering = true;
printControl.PrintFeed(drawing, 4);
else
Thread.Sleep(1000);
timeout++;
catch (Exception ex)
Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
// Wait a short while
Thread.Sleep(1000);
// Clean up
// usbHost.Dispose();
return;

Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :)

OraOledbous10.dll Specific module could not be found

To Any Oracle experts,
I have downloded the latest Oracle 10g Vista\XP client 10.2.03 which includes the OraOledb ADO drivers. I am getting a spuradic error :
"OraOleDBpus10.dll .. Specific module could not be found." My Oracle database is 9i ..
Strangly enough .. this only occurs when I run my executable from my local drive ( xp sp3 ) . if I place the executable on a network drive .. running it from my box ( same box ) .. the error does not occur ..
I am new to this forum .. I am using a TOLeAuto() class from xHarbour and Borland's C++ 5.5 compiler. The below code is the syntax. I loaded the Oracle database utilities, SQL+ and the Windows Drivers which includes the OraOledb. I know the setup is working because I can connect with the SQL+ utility so I know my tnsnames and sqlnet.ora files are correct.
Again .. this error only shows up sporadically on my local xp-sp3 box .. I have not loaded it on Vista .. and forget about Windows 7 .. the client will not even install because the OS version number is out of range.
The paths are correct, and my compiled program runs from a network .. just not ( always ) on my local xp sp-3 machine .. especially seems to happen after a run-time failure of my application. This is an app in development and I wil lhave run-time failures constantly.
Any advice would be quite helpful
Rick Lipkin
SC Dept of Health, USA
xPROVIDER := "OraOledb.oracle"
xSOURCE := "efis"
xUSERID := "suntrack"
xPASSWORD := "xxxxxxxx"
oRs := TOleAuto():New( "ADODB.Recordset" )
oRs:CursorType := 3 // opendkeyset
oRs:CursorLocation := 3 // local cache
oRs:LockType := 3 // lockoportunistic
cSQL := "SELECT FAC.LOCAL_FACIL_EID, "
cSQL += "FAC.TANK_OWNER_EID, "
cSQL += "FAC.SITE_NUM AS SITE_NUM, "
cSQL += "STANDARDTASKS.GETNAME( LOCAL_FACIL_EID,'NO_NUM' ) AS FACILITY, "
cSQL += "ADDR.ADDRESS_1 AS ADDRESS, "
cSQL += "ADDR.CITY AS CITY, "
cSQL += "ADDR.STATE_CODE AS STATE, "
cSQL += "STANDARDTASKS.GETNAME( FAC.TANK_OWNER_EID,'NO_NUM' ) AS OWNER, "
cSQL += "FAC.LOCKED_IND AS READ_ONLY "
cSQL += "from SUNTRACK.EFIS_UST_FACILITIES FAC, "
cSQL += "SUNTRACK.ADDRESSES ADDR "
cSQL += "where ADDR.OWNER_EID = FAC.LOCAL_FACIL_EID "
cSQL += "AND ADDR.ADDRESS_TYPE_CODE = 'BUSINESS' "
cSQL += "AND ADDR.STOP_DATE IS NULL order by site_num"
TRY
oRS:Open(cSQL,'Provider='+xPROVIDER+';Data Source='+xSOURCE+';User Id='+xUSERID+';Password='+xPASSWORD )
CATCH oErr
MsgInfo( "Error in Opening EFIS_UST_RELEASES table" )
oWndChild:Show()
RETURN(.F.)
END TRY

Would you resolve this problem? I have the same problem.

O/S-Error: (OS 126) The specified module could not be found.

i get this error in my vb6.0 application...
"O/S-Error: (OS 126) The specified module could not be found.
ROW-00054: Cannot load the library"
Assuming my connection is fine...
DB is oracle 9.2.0.4 patch installed,MDAC 2.8,VB6.0
My code snipped goes like this...
conn.Open "Provider=OraOledb.Oracle;User ID=test;Password=test;DATA SOURCE=oracle.world;UseSession Format=1"
objADOCommand.CommandText = "select * from wfmuser"
objADOCommand.ActiveConnection = conn
adorec.CursorLocation = adUseClient
objADOCommand.Properties("IRowsetChange") = True
objADOCommand.Properties("Updatability") = 7 ' Insert, Delete and Update
Set adorec = objADOCommand.Execute
it gives me the error upon execution of above line.
i have reinstalled the OLEDB provider,as well as MDAC.
but of no help...
i have even cheked my OS path for oraHome entry.
please respond ASAP...i am stuck.

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)

Hi All,
I have existing SSAS project. Previously it was working but now its showing following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)
Please provide the solution.
Thanks & Regards,
Vivek Singh

Hi Vivek,
According to your description, you are experiencing the error "The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)" when opening the SQL Server Analysis Services project that can be opened
without any problems, right?
Based on my research, the issue is caused by that some .dll files in your SSAS instance are corrupt. In your scenario, can you open other SSAS project? Please download the Adventure Works for SQL Server 2012 sample project and check if
you can open it or not.
https://msftdbprodsamples.codeplex.com/releases/view/55330
Besides, here are some similar issue with your, please see:
https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
Regards,
Charlie Liao
TechNet Community Support

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll
Please tell me there is a fix that does not involve buying a computer clean sweep program.

Hi brigitta2,
You might be getting the error message because of any of the following reasons:
.dll files are corrupt or missing
Attack of malware or other spyware
Incorrect installation of applications
Damaged Windows registry
Old Windows device drivers that need to be updated
The problem can be sorted if you know the exact reason behind the same. Please let me know the exact error message that appears on your screen.
If the issue is with damaged files then you might need to replace them or if it is a system issue, then please take your laptop to an expert who can deal with system issues.
Regards,
Anubha

RUNDLL There was a problem starting Appdata/Roaming/Wisdl.dll The specified module could not be found.

Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard

Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard
Richard
It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions database. I suggest you, firstly, download and
run the free Malwarebytes' Anti-Malware from
http://www.malwarebytes.org/free/ to ensure that you are completely clean. If you then restart the computer and the message is still appearing try one of these, but it is prudent to create a system restore point before you change the registry in (1) below
by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab > Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other ‘autorun’ keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and
type the rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.
Ninety-nine per cent of politicians give the rest a bad name.

C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found."

Recently, when I reboot/start up my Windows 7 HP laptop, an error pops up: "There was a problem starting C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found." How do I fix this?
I have already run the Malwarebytes Anti-Malware program to remove all "threats", "viruses"; etc.

Recently, when I reboot/start up my Windows 7 HP laptop, an error pops up: "There was a problem starting C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found." How do I fix this?
I have already run the Malwarebytes Anti-Malware program to remove all "threats", "viruses"; etc.
Very few authentic dll files reside in that folder. It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions
database.
Try one of these, but it is prudent to create a system restore point before you change the registry in (1) below by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab >
Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and type the
rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.

Icon-the specific module could not open, background contains pops up on opening firefoxwhe

Similar Messages

Maybe you are looking for