Icon thingy

i have a little yellow ball wiv the number one next it at the top of my screen and i dont know what it is? anybody help?

wiv?
That's a browser push message if it is yellow.
If it's blue, it's a WAP push message.
1. Open your main Messages folder.
2. Press the Menu key (left of the trackball).
3. Click on View Folders.
4. Click on Browser Push messages (or WAP Push Messages).
5. Read or delete the messsage.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

HT1451 Can anyone tell me what the icon thingy's are at the top on the iTunes playlist

Can anyone tell me what the little icon thingy's are at the top on the iTunes playlist

Play and shuffle just to the right of the playlist name and over to the right an icon to change the view, unless you are looking at a different set of thingys?. Might help to post which version of iTunes. I'm using version 11.0.2.
tt2

Weird Icon thingy

I have put icons on to all of my folders from pictures I have. No problem there, but when I want to put it on my ACTUAL pictures folder, if I choose a small picture, or a large picture, or an icon sized picture, no matter what, the only icon that shows up is a generic ".JPG" indicator. I can't get the picture to show up.
I have tried making another pictures folder to put the icon on and then move all the stuff into it, but it still did the standard .jpg icon. How do I fix this?

I suspect you are not applying the icon correctly. open the image you want to use in Preview and enter command+c. then select Pictures folder, enter command+i, select the little icon in the top left corner of the resulting info popup and paste the icon there.
Message was edited by: V.K.

Bluetooth icon thingy has moved in between clock and spotlight?

Yeah, i have no idea what category the "problem" (more cosmetic than function-related) belongs... I have somehow managed to move my bluetooth icon from the left side of the time to the right side of the time (between spotlight and clock)...
A picture:
http://thor.webfront.dk/files/img1172752116797.png
I've talked to a rather experienced mac using friend of mine, and he has no clue of how this could have happened... According to him, it should be impossible - but I've done it anyway...
Anyone know how to move the icon back on the left side of the clock?
Edit:
What is that row of icons called, anyways? Process Bar, like in windows?
MBP 15.4" 2.33GHz Mac OS X (10.4.8) AEBS, most likely an aTV-station in the near future

Have you tried going into the Bluetooth Preference Pane and switiching it off and back on? Failing that, trashing the com.apple.sysmtemUIserver.plist file from the home / library / preferences folder will reset all the options up there to default.
Menu Items seems like a reasonable name?
Regards
TD

Safari icon thingy

I ran onyx which had an option to clear the URL icons, after doing this Safari is like 50% faster and many sites that I thought had gone south are working great.
As these pointless icons do nothing usefull and only appear to ruin things, is there not a way to simply stop safari using them?

Gary,
SafariSpeed 1.3 can purge all currently stored Favicons and prevent any new ones from being saved.
;~)

My Itouch5 is lowbattery so I charge obviously, but when I charge it's like it stayed for the battery thingy icon and I waited of like almost an hour? Idk,, what I'm gonna do? Am I going to wait longer or what?

Pls help me... I don't know what to do.. It's like I just used it a while ago then when it shut down I charge it and it stayed in the battery icon thingy if u know that.. And it stayed for like an hour? Idk... Pls help me I miss my itouch...

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How do you fix your ipod touch when it has two icons meaning "plug into itunes"?

I need help! it has this as my screen ----->   a charger, then arrow and then an itunes icon thingy. And its not even being recognized on itunes (via computer)! It wont go into the lock screen and everytime I turn it off and it has the logo, it just goes right back to the "plug into itunes" screen! Please help ASAP!! Also it would be much better if there was a was to reset it without downloading anything, such as Limera1n. I really dont mind if it has to be reset.
Thankyou!
         : P : ) : D :/ :O

See Here...   http://support.apple.com/kb/HT1808

Airplay icon gone missing

Hi, only got my iPad 2 yesterday and have set it up along with our new Apple TV (2nd Gen). Am having a few probs but the main one being that the little airplay icon thingy that used to come up when I play a movie has disappeared. I also followed the instructions about pressing the home button twice and then swiping to the right, but this just brings up the play button etc for music/movie. Can anybody help...am desperate to sort out airplay and mirroring.
Thanks

I will save you the trouble!
I had the same problem and went in to apple it worked fine there!
They told me that they had to reset all there routers because of the new OS iOS 5.
That worked for me but if that dosent work you have to restore it or take it into apple.

Internet icon & network deleted...

i'm not sure what i was doing haha, but i meant to click on something and i had accidentally dragged my internet icon ( the one with the @ symbol..you know in the dock next to the trash can) and it got deleted and so did my network which when you click on MAC HD. above the HD..soo yeah i thought they both went into the trash can, but they didnt. is there any way i can get them back?

The internet icon thingy is just Apple's homepage ...type in www.apple.com then drag the small apple icon (by the address in the address bar) to your dock and it will magically reappear.
Not quite sure what you mean about your network though ..are you still connected?

System crash after 10.8.4 update

Hi all, i am using a Mac Mini (mid 2011) with mountain lion. i am having problem with it after the recent 10.8.4 update and now i am pretty much stuck and cant even log in.
1. the 10.8.4 update
i have a mac air as well and i did update for both using the same network in the office, both failed as i still see the 10.8.4 update in my App Store. i downloaded the combo update and it worked fine with my mac air. but ever since the update incident, my mac mini had been behaving weirdly and is very very slow.
2. what is wrong
-initially i could still go the the page that allows me to enter my password, but the moment i logged in, there would be a grey spinning icon thingy that wouldnt go away and i cant do anything
-subsequently i can do anything, i cant even log into safe mode, just show the grey screen with apple logo and my cursor
3. troubleshoot
-i have tried the apple hardware test, said all hardware ok
-used recovery HD to try to fix disk permission, there's a file that cant be repaird but it is one of those error message that can be ignored according to apple
-reset PRAM (the option command p r combo)
- tried reinstalling OS X from the recovery HD, but the download also hang at the final portion of the progress bar, at the very last bit, from '0 seconds remaining', it jumped to '5 hours' and hasnt move since (i tried this multiple times, always the same problem). i have also checked my internet connection using my other mac, it was ok
- i have more than 80% free space in my hdd
Prior to this episode i have not added any new software to the mac mini, am really running out of idea of what could be causing the problem. as compared to when i first got it, the login is a bit slow, but i thought that's pretty normal when i start filling up the hdd.

You'll have to do whatever you were planning to do if the machine needed service.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Couldn't get to the login scrn. Circle with slash symbol. S-mode not helpin

System: *PowerMac G4 DDR 1GHz with 1.25GB RAM and Tiger 10.4.10 (or .11 not sure)*
At first, I could not get the Mac to get to the login screen i.e. it boots up but the timer symbol thing (you know that clockwise 'loading' icon thingy) keeps cycling for hours (eventually I switched it off not to waste electricity).
Tried second time using OS X install disk and check + repair disk, then boot up - still the same symptoms. (NB. Looks like I can do the fresh install though but that is not my intention just now).
Then, did the reset PRAM thing (cmdalt+PR), second chime - folder/question mark (no startup disk screen), then it shows the circle with slash icon on screen, eventually shut it down.
In single user mode, it stops after the 'got bootdisk...' and no flashing of the keyboard cursor.
In verbose mode, almost the same as above.
+Have not changed the PRAM battery or reset PMU. Have been off the grid (off at socket for quite a long period but does not normally do this).+
+In single user mode, one of the line says clock is wrong or reset. After PRAM reset, one line says PMU was reset.+
My questions are:
1. What is that circle with slash icon mean? (can only find on Intel Mac pages - could not load boot.efi, or some other issue)
- ref: <http://support.apple.com/kb/HT2674>
2. Is installing a new system folder the only solution?
3. Do I need to get a new battery?
4. Is my startup hard disk at fault?
Thanks.
dean

Hi Dean,
Have been off the grid (off at socket for quite a long period but does not normally do this).
I'm pretty sure the battery is extremely dead if the computer has been off the grid. Remove the PRAM battery and see if it starts. A new battery is always a good place to begin. We've seen plenty of posters here say their MDD startup problems cleared up with the installation ofa new battery. I get my batteries here:
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
I don't know your geographic location; if you are not in an area served by the above reseller, you can use the specs in that link to shop locally. Bottom line--you need to eliminate the battery as a suspect before proceeding with troubleshooting.
If a battery is over a year old I don't bother testing it. I've had too many PRAM batteries test 3.6V in my hand yet did not perform well enough under load to propelr work in teh computer.
Another easy thing to try is a Safe Boot. Info here:
http://support.apple.com/kb/HT1455
Be sure to give the computer time to get to a desktop--takes longer is safe mode.

ABAP OO - 2 Attributes are Key Fields - Constructor & m_por-instid

Hi,
we are running 6.40
In my class there are 2 attributes that are key.
In my CONSTRUCTOR, how do I set m_por-instid when I have two attributes as key? Do I concatenate the 2 attributes into a variable and then do m_por-instid = variable?
Any other ideas?
Much thanks and regards,
Cristiana

Hi,
Kjetil is spot on about the structure. It's easy enough:
On the types tab create a type t_key, then click on the code-arrow-icon-thingy between the type and description fields
types:
    begin of t_key,
      po_number   type ebeln,
      item_number type ebelp,
    end of t_key .
then in your methods:
data: lv_key type t_key.
lv_key-po_number = im ebeln.
lv_key-item_number = im_ebelp.
m_por-instid = lv_key.
Regarding reducing the key to 32 characters, it's not a Microsofty idea for a change. It is a standard 32 byte GUID which is compatible with anything that talks BPEL, WF-XML, SOAP or similar. If you need longer keys then you need to work with persistent class GUIDs - i.e. get your key fields and use the GUID from a persistent class.
It's even documented <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/e52f6af36db84999a937146382f0e6/frameset.htm">in the SAP help</a>
Hope that helps,
Mike

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

My pictures are not showing up in CS4

I have a Canon 40D and CS4. I have had both for well over 6 months and everything worked great. Then
2 days ago my CS4 started acting up. Everytime I opened it, it would open then close right back down. I called a computer guy and he came right out. Well besides my computer needing more ram he couldn't figure it out. So he reinstalled it. Then yesterday he came back over to add more ram to my pc. (yesterday other than making sure CS4 opened up I did not use it) Everything seemed fine till tonight. I got the raw files from my cf card onto bridge but there were no pics, just the little cr2 icon thingy. Tried to open one in ps and it said wrong kind of documentaion. Thought oh no card gone bad. So I grabbed the card from 2 days ago (with pics I already loaded to my pc) and it did the same thing. I can see the pics on my camera.
Can someone PLEASE help me fix this?
TIA,
Tricia

If this is a Photoshop question please post it in the Photoshop forum. This forum is for suite specific issues.
Bob

IPhone isn't recognised as a camera device, but DOES appear in iTunes

Evening, I have an issue with getting photos/videos off from my iPhone 4.
Everything syncs perfectly fine in iTunes, contacts, music, apps ect. "Kayo's iPhone" pops up and away it goes.
However, it not appearing in *My Computer as a camera device* for me to remove photos from. The Apple Mobile Device USB Driver (found in device manager) is installed correctly and working fine. I've been able to tether, no issues there.
But under 'Computer Management > Device Manager > Other Devices > iPhone' it displays the little yellow triangle warning icon thingy, to advise that drivers are not installed correctly or the device is not operating properly.
Have tried right click > 'update driver software' with no luck. In properties the device status error is:
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
I have read a few other forums that say you need to remove all other foreign photos that my not be recognised by the laptop and may cause this issue. I have removed all emailed/mms'd/saved/wallpapers/screenshots/edited in Photoshop for iPhone app and ect. The only photos/vids remaining were taken with this handset. Rebooted laptop and iPhone, no changes... I even deleted old photos that had transfered over from the iPhone 3GS from when I upgraded about a month ago.
I have the latest iOS, I have the latest iTunes, I have the latest windows updates. Where am I going wrong? How do I get the silly thing to recognise as a camera???? Where do I find the drivers? Have searched but not found anything helpful. Am I stuck because I have Win7?? How do the iPhone drivers initially get installed to the computer?
Has anyone else had this issue? I've been able to use Dropbox to get a few photos off, but they can only be selected one at a time. Would much prefer to just drag and drop - especially some big videos that I can't email (and dropbox crashes when I try to sync them)
Have tried to 'Add new Device' - nothing shows up in the list.
Have also checked Autoplay for devices - nothing shows up in the list.
Any help/advice would be appreciated!
Cheers, Kayo

I had the same problem and after 3 weeks of searching found a post that said you need Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
The URL below has this. Once I had installed this I could see my iphone camera roll.
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=31017ed3-166a-4c75-b 90c-a6cef9b414c4&displaylang=en
Thanks to LarryLarry for the info - near the end of
http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/0e73e4b1-9b7e -4a6f-98d4-058c7d12edc7
HP8730W Windows 7 Windows 7 cannnot see iphone camera

Icon thingy

Similar Messages

Maybe you are looking for