Icon transparent in "Get Info" but not in finder...

How do I get my custom icon to be transparent in finder?
Snapshot:
Suggestions?

Thanks dude!!!
I do not know why .PNG's created in Adobe Photoshop with the transparent background do not play well with finder, but do so in the "get info" window in the icon position space. I basically opened the same file in preview, saved it as a .PNG with respect to Preview, and this time it worked:
It seems to me the only explaination is that the image with transparent backgroud must be a PREVIEW image?
Again, thanks.

Similar Messages

  • Updated tracks using Get Info but not updated on iPod

    Okay so I've been experiencing this problem for YEARS now and still no resolve.
    If I want to make a changes to a track already on my iPod using "Get Info" in iTunes the change seems to update on iTunes but when I go to my iPod the change hasn't been updated. I know some people mention syncing it but I manage my music manually and I never store my music on iTunes. I have too may tracks to store on my computer. I only use iTunes to transfer music to my iPod after that I delete it from iTunes.
    The only workaround I found is to delete the track from my iPod add it to the iTunes library make the changes there and then transfer it back to my iPod which is time consuming. I've found loads of threads on this dating as far back as 2007 but no definite solution.
    Has a solution been found yet?
    Thanks in advance.
    Note:
    iPod Touch 3rd Generation running iOS 5.1.1

    Thanks lllaass for the update.
    It used to work but it's been so long since it did I can't remember what year the problem first appeared. And I know it's not only me and surely Apple must be aware of this by now. What seems like such a small problem should have a solution/fix. I wouldn't mind but it's these little problems that keep cropping up and they are there for years with no resolution. It's just not good enough not when I think about how much I paid for my iPod.
    *If anyone who comes across this thread has a newer iPod and has the same experience, could you let me know.

  • ApplicationLoader - Icon specified in the Info.plist not found

    Fellow developers,
    Have any of you seen this error when trying to upload the app using the ApplicationLoader:
    Icon specified in the Info.plist not found: iconplus
    The icon file is there and has always loaded just fine on the emulator. I entered the filename in the app's Target, but without the .png extension. Is that correct?
    Also, I mad sure the icon file name has no special characters or spaces.
    Any other ideas? It's not fair not to be in the App Store because of an icon
    Eugene

    To answer my own question:
    Yes, you really need to include the icon's extension when you enter the icon name in your project properties or Target. Also, avoid spaces and special characters in your icon's file name.
    Ex: myicon.png
    If you don't specify an extension, you will not be able to upload your app to iTunes Connect, but get an error message saying that your icon is not found.

  • Deployment Error: DCs get activated but not deployed

    Hello All,
    I am new to NWDI. I did some code modifications in my DC. When i check in my activity, it gets activated, but not getting deployed. At first i was getting authentication problem, that is resolved now. Now i get this CMS log:
    20140819135816 Info :Aug 19, 2014 1:58:16 PM Info: com.sap.ASJ.dpl_api.001023 Deployment of [name: 'abc', vendor: 'XXXX.com' (sda)] finished.
    20140819135816 Info :Aug 19, 2014 1:58:16 PM Info: com.sap.ASJ.dpl_api.001052 +++ Deployment of session ID [467] finished with status [Error] +++. [[ deployerId=7 ]] [[#49: 4.031 sec]] [
    20140819135816 Info :===== Summary - Deploy Result - Start =====
    20140819135816 Info :------------------------
    20140819135816 Info :Type | Status : Count
    20140819135816 Info :------------------------
    20140819135816 Info :> SCA(s)
    20140819135816 Info :> SDA(s)
    20140819135816 Info :- [Aborted] : [1]
    20140819135816 Info :------------------------
    20140819135816 Info :------------------------
    20140819135816 Info :Type | Status : Id
    20140819135816 Info :------------------------
    20140819135816 Info :> SCA(s)
    20140819135816 Info :> SDA(s)
    20140819135816 Info :- [Aborted] : name: 'abc', vendor: 'XXXX.com',
    20140819135816 Info :------------------------
    20140819135816 Info :===== Summary - Deploy Result - End =====
    20140819135816 Info :]
    20140819135816 Info :end of log
    20140819135816 Info :End deployment:
    20140819135816 Info :
    20140819135816 Info :Summary of deployment
    20140819135816 Info :==> deployment finished for abc (103) with rc=12
    20140819135816 Info :deployment finished for buildspace: NDI_NDITK080_D
    Thanks.

    Dear Pranay
    manual deployment can be done in two ways
    1. right click your dc in the studio ->Development Components->Deploy .
    before doing this , in your studio go to windows->preference->sap j2ee engine -> fill the message server host and message server port i.e on selecting deploy it will ask for password , enter sdm password and your ear file will be deployed.
    message server host --> host entry or IP address of the server to which you want to deploy and
    message server port - > ask the basis person to give the port or else you can check via
    http://serverhost:portno/index.html -- > click on system information --> it will prompt for user id and password .. fill the crendentials if you have and you will find the message port info in the top left corner. for more info refere the below link.
    http://scn.sap.com/thread/1443866 -- to get message server port go through this link
    2. you can take the ear file from your dc , in nwds studio open Navigator, expand the dc then dril down to gen->default->deploy -> here ear file will be available , copy the ear file and give that to your basis guys to deploy directly from SDM.
    or follow this link
    http://scn.sap.com/thread/1884858 .
    Regards
    Govardan

  • File size in finder ' get info' does not refresh

    I'm moving files about and need to check how large the folders are (in preparation for burning a dvd). 'Get info' is not refreshing the file size (and it's not just enormous folders). I have installed 'Refresh Finder' but it doesn't make any difference. The only way I can see the true file size is by restarting (a pain). What else can I try?

    Yes, Finder can be a bit slow to update. It shouldn't be necessary to restart, though; using the force quit dialogue to relaunch Finder should suffice.
    Press cmd-opt-esc (⌘⌥ esc) to bring up the dialogue, select Finder and click relaunch.

  • Email gets queued, but not sent until I login to my account on the server.

    This is very strange. Let me explain.
    1. Snow Leopard Server 10.6.2 running on an iMac.
    2. I have the Mail Service running on the server. I can receive emails without problems.
    3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
    4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
    postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    postfix/qmgr\[65313]: 942814AD55B: removed
    postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: C611B4AD568: removed
    4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
    postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
    postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
    postfix/qmgr\[65313]: B5F574AD582: removed
    postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: 20B244AD5B0: removed
    I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
    Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
    Rob

    Looks to me like the anti-virus scanner, amavis. The clue is the line:
    postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
    My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

  • My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

    my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ? 
    I got my case from owc computing
    thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
    no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
    all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage,    and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.          
    I am gratefful , just please help on the hard drive question as external ,
    thanks
    just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
    and I then will be able to upgrade to Snow Leopard and i life 2011.

    Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive  free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
    woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500  plust 250 plus 120 GB drives all of them
    ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
    yipeee
    thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    What site are you trying to watch?  I just tested 3.  The you tube app streams from the pad to apple tv fine, as long as the source video format is ok.  Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine.  A few have a different format, and do audio only.  Netflix does not stream at all, but you can get to netflix directly from apple tv.  Whether or not it streams is directly related to the format of the video.  Some do, some dont.

  • How to lock a drive and/or folder if there is no lock icon in the get info field?, how to lock a drive and/or folder if there is no lock icon in the get info field?

    how to lock a drive and/or folder if there is no lock icon in the get info field?, how to lock a drive and/or folder if there is no lock icon in the get info field?

    You can create an encrypted disk image.
    http://www.macworld.com/article/1154559/password_protect_folders.html

  • Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

    I have this massage every time close ps cc
    Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

    You may get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If FINDER means Mac, read below (and try to give more information when asking a question)
    Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • HT1918 hey am stranded its like a month now my account does not have  the None in the payment type section i had put my visa info but not now i want to remove them please urgent help

    hey am stranded its like a month now my account does not have  the None in the payment type section i had put my visa info but not now i want to remove them please urgent help

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • How do I get iPhoto but NOT iLife?

    How do I get iPhoto but NOT iLife?

    If you want iPhoto for Mac, click on this link: https://itunes.apple.com/ca/app/iphoto/id408981381?mt=12
    If you want iPhoto for iOS, click on this link: https://itunes.apple.com/ca/app/iphoto/id497786065?mt=8
    The Mac iPhoto is $15
    The iOS iPhoto is $5
    Hope This Helps!
    Mini Apple Genuis

  • Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

    Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

    If you purchase the phone at the full contract price and have no term left on your carrier contract, the carrier will unlock it for you. That's what I am doing with AT&T. I'll pay the full purchase price for the phone and since I don't have a contract with them, they will unlock it for you. It can be difficult to get it done since most of their customer service is very ill informed but I have had many discussions with them on their chat that I have records of them stating they will unlock any phone if you do not have an existing contract. It's the law.

  • [svn:fx-4.x] 15099: Setting truncateToFit to false so that chart labels would get scaled but not truncated if space is not enough

    Revision: 15099
    Revision: 15099
    Author:   [email protected]
    Date:     2010-03-29 07:00:06 -0700 (Mon, 29 Mar 2010)
    Log Message:
    Setting truncateToFit to false so that chart labels would get scaled but not truncated if space is not enough
    QE notes:
    Doc notes:
    Bugs: FLEXDMV-2359 (Axis labels are clipped in sdk 4.1, since label is used instead of UITextField)
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FLEXDMV-2359
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/datavisualization/src/mx/charts/AxisRenderer.as

    Welcome to the forum Oreckel!
    The best way to work with FCP's media files is to not overthink it. It's all done from the "Scratch Disk" settings. Just select a DRIVE for media captures and renders to go to. FCP handles the rest. It creates a folder called "Capture Scratch", another called "Renders" and a third called "Audio Renders". In each of these folders it creates a folder for each project file containing the media that is associated with that particular project, and it names these folders the same as your project files' names. Couldn't be easier.
    Autosave Vaults, Waveforms, and Thumbnails should be kept on your startup disk in your documents folder. You probably already have one there named "Final Cut Pro Documents" If it's there just select the Documents folder and FCP will put these three folders in the one named "Final Cut Pro Documents".
    Jerry

  • Quicktime won't open files, Get Info Video Preview crashes finder

    When double-clicking any .avi video file, Quicktime attempts to open it, and then returns an error report with "excbadaccess kernprotectionfailure".
    VLC will play any of these files perfectly. I want to set up file handling so that VLC always opens .avi files, so I right-click a video file and go to "Get Info," but in that window the Finder tries to generate a preview of the video, and after a second or two crashes the Finder with no error message.
    It is very annoying not to be able to double-click video files to open them. How can I get this working?
    Sorry if this has been asked before. Any advice would be appreciated.
    Mac Mini Core Duo   Mac OS X (10.4.8)   Quicktime 7.0.4

    Thank you for the quick reply.
    That method works when selecting and then right-clicking individual files or groups of files, but I frequently put new .avi files on the machine, and I have to repeat the process. I was looking for a solution that would make any future .avi files open in VLC with a double click.
    Furthermore, once the file has been set to load in VLC and the icon has changed to a VLC icon, selecting Get Info for that file will still unceremoniously crash the Finder. Is there any way to fix the preview in the Get Info window, or at least stop it from crashing the Finder?

Maybe you are looking for