Icon tray issue, maybe related to power gauge

Dear Community,
I have a 1 month old ThinkPad L540 with Windows 7 Pro SP 1 with Power Manager 6.64.4.
My icon tray is  not shown correct, it seems that a part of the tray is shown twice, see the image below:
I tried disabling the power gauge (which i actually do not want), which did not solve the problem. Then it copied the first part of the standard icon tray. It does seem that it is related to power manager, however. But I am not sure about that. The copied part of the icon tray is unresponsive.
If i for some reason unlock the taskbar and tries to resize the icon tray area, it only gets worse. If I make it bigger, it just copies the icon tray again and again.
Any ideas? fixes? It's only aesthetic, but it annoys me like crazy!

Hi Vkgundersen,
Welcome to Lenovo Community!
We understood that your query is about battery charging indication on ThinkPad L540.
Regarding this issue right click on taskbar and go to Toolbars and un-tick Power Manager, and proceed the same step to tick it, check if the issue still persist.
Please check the below snapshot to perform it.
Spoiler (Highlight to read)
Hope this helps. 
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • New Power Gauge Problem

    Hello,
    I have a T61p and Vista x64. I've had this setup ever since I purchased the unit back in October of last year.
    When I recently updated to the new Power Management software the power gauge sticks on its certain percentage and doesn't update. Even when I disable it and re-enable it the gauge remains inaccurate. When I start the Power Management software it does report the current percentage remaining. The Vista taskbar icon is also reporting the correct read-out.
    This problem seems to occur when I put the computer into sleep and wake it up.
    Since this hasn't happened until I updated the software I suspect it's a software problem.
    Has anyone else ran into this?

    Count me in on this issue, exactly the same symptoms! 
    my configuration is 2767-1RG, T400 w/ 4Cell Bat, Vista x64 Ultimate, 4GB DDR3.
    Power Manager Version is 2.36
    We NEED this fixed. I can't have my laptop run down to 3% Battery with the Battery indicator showing 36% !
    --EDIT--
    ok, I'm beginning to think this forum software either hates me or has an issue with Opera. Mod: please merge this with thread http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=19023 where it should have gone in the first place. Sorry for the inconvenience...
    Message Edited by alexb2283 on 11-29-2008 02:35 AM

  • PDF 'print' and other 'next' and 'finish' commands hidden behind deep icon tray on monitor. Help!

    Pavilion Slimline s5212y desktop, Windows 7
    I can't find info on how to control lower icon tray depth so that I can see and click on various program install, PDF print and other 'print', 'next', 'finish', etc. commands. 

    Hello Veebeep
    If I understand you correctly your PDF viewer is not giving you the options you posted above. Click on View and ensure that both Read Mode and Full Screen Mode are unchecked. This should get your options back if you are experiencing that I am thinking you are. If this does not work if you could elaborate a bit on your issue I will try to assist.
    Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Various symptoms all related to power?

    Yesterday, I had my MacBook at work during the day. When I brought it home, somehow I forgot to plug the power brick in - I connected the MagSafe connector, but didn't plug the other end into my power strip. Today, I had a variety of symptoms, some of which I have experienced and reported, some of which others have reported. Eventually the battery was all but depleted, the MacBook shut down, etc.
    • I had more than usual "display glitches".
    • My iPod Touch not only didn't charge overnight, it actually ran almost to empty.
    • When I connected my Touch, iTunes didn't launch to sync. When I launched iTunes manually, the iPod didn't show up, but when I tried to quit iTunes it told me it WAS syncing, did I want to quit, etc.
    • When I slept the MacBook, pressing a key on the external keyboard didn't wake it up, I had to open and close the case.
    AFTER the battery was fully charged, everything returned to normal.
    • Connecting the iPod Touch caused iTunes to launch and sync.
    • Pressing a key on the external keyboard caused the MacBook to wake up.
    • I've had no more external display glitches.
    All of this makes me REALLY wonder if many/all of the problems I and others are seeing are related to power in some way. Maybe power management isn't right yet, maybe the lower-rated power supply is marginally acceptable, etc.
    Doug

    Just wondering by display glitches what you mean, Macbook display or external display?
    Also I would say that it is just a Software bug that will be updated within the coming weeks.
    Lucas D

  • HT4623 I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?

    I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?

    Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.

  • Anyone know how to? Remove from browser startup and move to icon tray?

    Does anyone know how to remove the application (HP Smart Web Printing) from my webpage during browser startup and yet allow me to retain it in my icon tray?????  If not I will probably delete it.

    Hi,
    The only option I know of is to disable the add-on in IE.  You can then always just re-enable it if you need to use it.  If you want to do this, from the Start Menu, open the Control Panel, open Internet Option, click the Programs tab and click Manage Add-ons.  Scroll down the list until you find Smart Web Printing, left click the entry once to highlight it and then click the Disable button that will appear in the bottom right of the window.  Re-enabling this is just the reverse.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1414 Hi there, my I pad series 2 has a black screen, it will not power up when attached to a laptop, and only shows black screen and Apple icon when attached to a mains power source. Any thoughts please? Allan

    Hi there my Ipad 2 has a black screen, will not power up and will only have an Apple icon when plugged into a mains power source. It will not power up when connected to a laptop. Any thoughts please?
    Regards,
    Allan

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • HT2037 icon reads "battery not charging" with power adapter lit "green". Do I replace battery or power adapter?

    icon reads "battery not charging" with power adapter lit "green". do I replace the battery or the power adapter?

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

  • OpenGL? After Effects Issue / Related to Power Surge?

    Hello.
    I had a power surge that killed the power supply on my Quad 2.5GHZ G5. I got that fixed at the Apple Store, but since getting it back I was getting errors with OpenGL in After Effects. I had to disable it to get faster previews of what I was doing. I have very little understanding of what the OpenGL plug-in does or how it relates to my monitor, but could that power surge have affected this and caused this problem? Hopefully there is enough info here to offer me some guidance.
    Thanks in advance.

    This may be a specific case of a combination of the graphics card, your RT.X100 and the Matrox CoDecs. I suppose you went with the Parhelia to ensure maximum compatibility to ensure maximum compatibility with the other Matrox stuff and now it's biting you in your behind. I really do think that it's an issue with either Pixel Bender probing the card and not "exiting gracefully" when it finds it incompatible or MediaCore trying to manage your Matrox CoDecs when it isn't supposed to... If you are feeling adventurous, you could try to re-install the system without the video hardware and CoDecs, just the Parhelia and see how AE CS4 behaves, but of course that's just as undesirable. You could also try creating different hardware profiles (via your device manager), but usually, once a system is "polluted" with offending components, this does not bring the desired betterment...
    Mylenium

  • Wireless weird issue related to power supply

    Hello,
    I have been having some issues from time to time with my wireless connection from my MBP to my router . Distance is out of the question since the router is very close to the desk where the mbp stands.
    At first i thought it was the router, since its a cheap one. But tonight i had another issue. I just couldnt connect to the router , getting a Connection Timeout error. I looked up a little on google, saw somewhere someone saying something about unplugging all usbs, power source etc. So i unplugged the power cable from the MBP , and voila! it connected. Very strange, i dont know why this should cause an issue...but thats just half of it. As i was mentioning at the beggining of the post, from time to time i had some issues with the wireless connection from the MBP to the router, the issues were bad connectivity. I was testing it via TERMINAL -> ping router_ip ...and getting like 60% or more loss. Since tonight i was 99% sure it was the router's fault, but tonight i thought to try something at one time when the issues surfaced again: i unplugged the power cable from the MBP and..suprise suprise, no more packet losses on the PING results...and i tested...plugged the power cable , PING returning losses (and of course, web pages loading like crap)..unplugg => all fixed.
    I dont know what to make out of this...the mbp is new, about 2 months, 17 inch model, 2.8 ghz...Maybe anyone knows anything or had the same issues?

    I am having a similar but mirror image of your problem: my network connection keeps dropping out ONLY when on battery power. If I stream music from the Time Capsule router, the connection is solid. If I check the Airport connection in the menu bar, it will return (briefly). When MBP is on AC power, all is good.
    I suspect a software problem, perhaps a plist item somewhere is corrupted but where should I look? I migrated all my network settings from a clone of my old MBP which exhibited the same symptoms.
    Maybe I will start a new user account just to see if problem is there also.......

  • Power Supply Issues maybe?

    I have always had random and instant power downs. Which I initially attributed to heat. The machine is now shutting off instantly several times a day. It starts up and runs fine, but it is shutting down after anywhere from 10 minutes to 2 hours later. I am thinking it is a bad power supply that has gotten worse. I want to bounce this off the experts and see if there is anything else I can eliminate before buying a power supply?
    I have reset the SMU I think. I could not find a button so I unplugged for 15 minutes. I ran AHT from cd without errors, ran disk utility from cd, and checked to see if the SMART status is verified. I use temperature monitor which has read as hot as 115, but according to what I am reading that is well below danger.
    I did a safe restart to eliminate any font issues since I use a lot of fonts. I don't know what to look for in the console, but I saw nothing that looked suspicious. I am assuming since the AHT found no problems the logic board is functioning properly. Is that correct?
    Can you suggest anything else to narrow down my issue?
    Thanks for all your help. This machine is within a month of retirement, I think it senses something!

    I have had exactly the same problem over the last couple of days and it drives you nuts! It started to happen just after I transferred some files to a mates cheap firewire drive....no idea why...
    You can try actually pressing the SMU button
    http://docs.info.apple.com/article.html?artnum=300341
    These two articles also take you through a good process, including deleting some prefs.
    http://www.gibbilicious.com/gibbilicious/2006/02/troubleshootingthemysterious.html
    http://www.gibbilicious.com/gibbilicious/2005/10/mac_g5_desktop_spontaneously1.html
    Also check all the bits inside are connected. The airport card can get loose in particular. Double check memory is pressed in etc.
    I tried it all but to no avail until I read your post and tried Safe Restart. For some reason it dumped a load of files in my trash, but the issue seems to be gone (at least for now). I don't wanna detract from helping Kenny, but whilst peeps are looking if anyone can shed some light on what they are and whether I should bin them it would be good.
    All in a folder called 501.231504386 and called annex_aux, annex.db, Classic.fodb, filetoken.db, font.db, Local.fcache. Local.fodb, qdfams.db, System.fcache, User.fodb

  • Issue Relating to Power Cost in Daily Product Costing

    Hi,
    We are doing daily product costing. Here we want to allocate the power units of service to production cost centers proportionately on daily basis. Can anyone tell me is there any option in SAP and we need to go for development.

    hi,
    Power usage or cost can be apportioned only monthly wise not possible on daily basis. U can run the distribution or assessment cycle only for month wise, but not on daily basis.
    Regards,
    Sreekanth

  • Usb 3.0 device to 2.0 port issue, maybe Mavericks related?

    I have a 15" mid-2009 Mac Book Pro running 10.9.2.  The usb 2.0 ports seem to be working as my usb 3.0 external hard drive lights up but does not appear in under device in the Finder window.  External harddrive is working fine, checked it with a PC.  I use it with Time Machine as a backup device and it last worked in late December.  Not at all sure what's going on.

    biotechbeat wrote:
      External harddrive is working fine, checked it with a PC.
    How did you check it with the PC?
    How is the external HDD formatted?
    Did you try all USB ports?
    Did you try with a different cable?
    Did you try it with a different enclosure?
    Does it appear in Disk Utility?  If so, have you run Disk Utility>First Aid?
    Ciao.

  • X61s: Power Management issues and related questions

    1)  My problems started when I upgraded to PM 3.5:  system instability, overheating, and battery run-down.  I finally eliminated PM 3.5 and it is running better, but still seems to be running more hot than before.
    2) Question: can I take the battery out when running on AC current?
    3) Also, do the batteries for the X61 also fit for the X61s?
    Richard

    1) download TPfancontrol and check your system temp and fan speed.
    2) Yes, but not recommended as the battery acts as a UPS, which prevents your laptop from shutdown if there is an accidental plug pull from the ac socket, or brown out/black out. 
    3) yes.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • [solved] XFCE Dual monitor causes theme & icon, xconf issues

    Hey all,
    Here is the issue:
    I have  sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right (no mirroring) with this run  in normal session:
    xrandr --output eDP1 --mode 1920x1080
    xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
    xrandr --addmode VGA1 1920x1200_60.00
    xrandr --output VGA1 --mode 1920x1200_60.00
    xrandr --output VGA1 --left-of eDP1
    Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
    Section "Device"
    Identifier "Intel Graphics"
    Driver "intel"
    Option "AccelMethod" "sna"
    Option "monitor-eDP1" "eDP1"
    Option "monitor-VGA1" "VGA1"
    EndSection
    Section "Monitor"
    Identifier "VGA1"
    Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
    Option "PreferredMode" "1920x1200_60.00"
    EndSection
    Section "Monitor"
    Identifier "eDP1"
    Option "PreferredMode" "1920x1080"
    Option "Primary" "true"
    Option "Position" "1920 0"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "Intel Graphics"
    Monitor "eDP1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
    I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
    I have tried the  sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
    I have been  to all these places
    https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
    http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
    https://bbs.archlinux.org/viewtopic.php?id=98747
    https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
    https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
    http://intellinuxgraphics.org/dualhead.html
    http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
    https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
    https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
    http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
    https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
    Even after much research, still no luck.
    this might be useful:
    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
    Anyone have any ideas?
    here is my Xorg0.log
    [ 3.490]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 3.490] X Protocol Version 11, Revision 0
    [ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
    [ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
    [ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
    [ 3.490] Build Date: 08 November 2012 07:09:29PM
    [ 3.490]
    [ 3.490] Current version of pixman: 0.28.0
    [ 3.490] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
    [ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3.494] (==) No Layout section. Using the first Screen section.
    [ 3.494] (**) |-->Screen "Default Screen" (0)
    [ 3.494] (**) | |-->Monitor "eDP1"
    [ 3.494] (**) | |-->Device "Intel Graphics"
    [ 3.494] (==) Automatically adding devices
    [ 3.494] (==) Automatically enabling devices
    [ 3.494] (==) Automatically adding GPU devices
    [ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 3.504] Entry deleted from font path.
    [ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 3.504] Entry deleted from font path.
    [ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 3.504] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3.504] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3.504] (II) Loader magic: 0x7fcc40
    [ 3.504] (II) Module ABI versions:
    [ 3.504] X.Org ANSI C Emulation: 0.4
    [ 3.504] X.Org Video Driver: 13.1
    [ 3.504] X.Org XInput driver : 18.0
    [ 3.504] X.Org Server Extension : 7.0
    [ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
    [ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 6.276] Initializing built-in extension Generic Event Extension
    [ 6.276] Initializing built-in extension SHAPE
    [ 6.276] Initializing built-in extension MIT-SHM
    [ 6.276] Initializing built-in extension XInputExtension
    [ 6.276] Initializing built-in extension XTEST
    [ 6.276] Initializing built-in extension BIG-REQUESTS
    [ 6.276] Initializing built-in extension SYNC
    [ 6.276] Initializing built-in extension XKEYBOARD
    [ 6.276] Initializing built-in extension XC-MISC
    [ 6.276] Initializing built-in extension SECURITY
    [ 6.276] Initializing built-in extension XINERAMA
    [ 6.276] Initializing built-in extension XFIXES
    [ 6.276] Initializing built-in extension RENDER
    [ 6.276] Initializing built-in extension RANDR
    [ 6.276] Initializing built-in extension COMPOSITE
    [ 6.276] Initializing built-in extension DAMAGE
    [ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
    [ 6.276] Initializing built-in extension DOUBLE-BUFFER
    [ 6.276] Initializing built-in extension RECORD
    [ 6.276] Initializing built-in extension DPMS
    [ 6.276] Initializing built-in extension X-Resource
    [ 6.276] Initializing built-in extension XVideo
    [ 6.276] Initializing built-in extension XVideo-MotionCompensation
    [ 6.276] Initializing built-in extension XFree86-VidModeExtension
    [ 6.276] Initializing built-in extension XFree86-DGA
    [ 6.276] Initializing built-in extension XFree86-DRI
    [ 6.276] Initializing built-in extension DRI2
    [ 6.276] (II) LoadModule: "glx"
    [ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 6.281] (II) Module glx: vendor="X.Org Foundation"
    [ 6.281] compiled for 1.13.0, module version = 1.0.0
    [ 6.281] ABI class: X.Org Server Extension, version 7.0
    [ 6.281] (==) AIGLX enabled
    [ 6.281] Loading extension GLX
    [ 6.281] (II) LoadModule: "intel"
    [ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 6.285] (II) Module intel: vendor="X.Org Foundation"
    [ 6.285] compiled for 1.13.0.901, module version = 2.20.14
    [ 6.285] Module class: X.Org Video Driver
    [ 6.285] ABI class: X.Org Video Driver, version 13.1
    [ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 6.286] (++) using VT number 7
    [ 6.288] (II) intel(0): using device path '/dev/dri/card0'
    [ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 6.288] (==) intel(0): RGB weight 888
    [ 6.288] (==) intel(0): Default visual is TrueColor
    [ 6.288] (**) intel(0): Option "AccelMethod" "sna"
    [ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 6.289] (**) intel(0): Framebuffer tiled
    [ 6.289] (**) intel(0): Pixmaps tiled
    [ 6.289] (**) intel(0): 3D buffers tiled
    [ 6.289] (**) intel(0): Throttling enabled
    [ 6.289] (**) intel(0): Delayed flush enabled
    [ 6.289] (**) intel(0): "Tear free" disabled
    [ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
    [ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
    [ 6.289] (**) intel(0): Option "Position" "1920 0"
    [ 6.289] (**) intel(0): Option "Primary" "true"
    [ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
    [ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
    [ 6.294] (II) intel(0): Output HDMI1 has no monitor section
    [ 6.336] (II) intel(0): Output DP1 has no monitor section
    [ 6.337] (II) intel(0): EDID for output eDP1
    [ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
    [ 6.337] (II) intel(0): Year: 2012 Week: 24
    [ 6.337] (II) intel(0): EDID Version: 1.4
    [ 6.337] (II) intel(0): Digital Display Input
    [ 6.337] (II) intel(0): 8 bits per channel
    [ 6.337] (II) intel(0): Digital interface is DisplayPort
    [ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 6.337] (II) intel(0): Gamma: 2.20
    [ 6.337] (II) intel(0): No DPMS capabilities specified
    [ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 6.337] (II) intel(0): First detailed timing is preferred mode
    [ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
    [ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
    [ 6.337] (II) intel(0): Manufacturer's mask: 0
    [ 6.337] (II) intel(0): Supported standard timings:
    [ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 6.337] (II) intel(0): Supported detailed timing:
    [ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
    [ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
    [ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
    [ 6.337] (II) intel(0): Supported detailed timing:
    [ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
    [ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
    [ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
    [ 6.337] (II) intel(0): Monitor name: Sony LCD
    [ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
    [ 6.337] (II) intel(0): EDID (in hex):
    [ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
    [ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
    [ 6.337] (II) intel(0): 205054000000d1c00101010101010101
    [ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
    [ 6.337] (II) intel(0): 330023a4100000180727806971380f40
    [ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
    [ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
    [ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
    [ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 6.337] (II) intel(0): Using EDID range info for horizontal sync
    [ 6.337] (II) intel(0): Using EDID range info for vertical refresh
    [ 6.337] (II) intel(0): Printing DDC gathered Modelines:
    [ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Printing probed modes for output eDP1
    [ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
    [ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 6.343] (II) intel(0): EDID for output VGA1
    [ 6.343] (II) intel(0): Printing probed modes for output VGA1
    [ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
    [ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.344] (II) intel(0): EDID for output HDMI1
    [ 6.386] (II) intel(0): EDID for output DP1
    [ 6.386] (II) intel(0): Output eDP1 connected
    [ 6.386] (II) intel(0): Output VGA1 connected
    [ 6.386] (II) intel(0): Output HDMI1 disconnected
    [ 6.386] (II) intel(0): Output DP1 disconnected
    [ 6.386] (II) intel(0): Using user preference for initial modes
    [ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
    [ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
    [ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
    [ 6.386] (**) intel(0): DPI set to (336, 190)
    [ 6.386] (II) Loading sub module "dri2"
    [ 6.386] (II) LoadModule: "dri2"
    [ 6.387] (II) Module "dri2" already built-in
    [ 6.387] (==) Depth 24 pixmap format is 32 bpp
    [ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
    [ 6.387] (==) intel(0): Backing store disabled
    [ 6.387] (==) intel(0): Silken mouse enabled
    [ 6.387] (II) intel(0): HW Cursor enabled
    [ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.388] (==) intel(0): DPMS enabled
    [ 6.388] (II) intel(0): [DRI2] Setup complete
    [ 6.388] (II) intel(0): [DRI2] DRI driver: i965
    [ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
    [ 6.388] (WW) intel(0): Option "PreferredMode" is not used
    [ 6.388] (WW) intel(0): Option "Primary" is not used
    [ 6.388] (WW) intel(0): Option "Position" is not used
    [ 6.388] (==) intel(0): hotplug detection: "enabled"
    [ 6.388] (--) RandR disabled
    [ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.410] (II) AIGLX: Loaded and initialized i965
    [ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
    [ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
    [ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
    [ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    [ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 6.703] (II) LoadModule: "evdev"
    [ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.706] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.706] compiled for 1.13.0, module version = 2.7.3
    [ 6.706] Module class: X.Org XInput Driver
    [ 6.706] ABI class: X.Org XInput driver, version 18.0
    [ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
    [ 6.706] (**) Video Bus: always reports core events
    [ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
    [ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 6.706] (--) evdev: Video Bus: Found keys
    [ 6.706] (II) evdev: Video Bus: Configuring as keyboard
    [ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
    [ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 6.706] (**) Option "xkb_rules" "evdev"
    [ 6.706] (**) Option "xkb_model" "evdev"
    [ 6.706] (**) Option "xkb_layout" "us"
    [ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
    [ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
    [ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
    [ 6.732] (**) Sony Vaio Keys: always reports core events
    [ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
    [ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
    [ 6.732] (--) evdev: Sony Vaio Keys: Found keys
    [ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
    [ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
    [ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
    [ 6.732] (**) Option "xkb_rules" "evdev"
    [ 6.732] (**) Option "xkb_model" "evdev"
    [ 6.732] (**) Option "xkb_layout" "us"
    [ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
    [ 6.732] (II) No input driver specified, ignoring this device.
    [ 6.732] (II) This device may have been added with another device file.
    [ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
    [ 6.733] (II) No input driver specified, ignoring this device.
    [ 6.733] (II) This device may have been added with another device file.
    [ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.733] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.733] (**) Power Button: always reports core events
    [ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.733] (--) evdev: Power Button: Found keys
    [ 6.733] (II) evdev: Power Button: Configuring as keyboard
    [ 6.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 6.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 6.733] (**) Option "xkb_rules" "evdev"
    [ 6.733] (**) Option "xkb_model" "evdev"
    [ 6.733] (**) Option "xkb_layout" "us"
    [ 6.733] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 6.733] (II) No input driver specified, ignoring this device.
    [ 6.733] (II) This device may have been added with another device file.
    [ 6.733] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 6.734] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 6.734] (II) No input driver specified, ignoring this device.
    [ 6.734] (II) This device may have been added with another device file.
    [ 6.734] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
    [ 6.734] (II) No input driver specified, ignoring this device.
    [ 6.734] (II) This device may have been added with another device file.
    [ 6.735] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
    [ 6.735] (II) No input driver specified, ignoring this device.
    [ 6.735] (II) This device may have been added with another device file.
    [ 6.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 6.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 6.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 6.735] (**) AT Translated Set 2 keyboard: always reports core events
    [ 6.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 6.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 6.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 6.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 6.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 6.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 6.735] (**) Option "xkb_rules" "evdev"
    [ 6.735] (**) Option "xkb_model" "evdev"
    [ 6.735] (**) Option "xkb_layout" "us"
    [ 6.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 6.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 6.736] (II) LoadModule: "synaptics"
    [ 6.737] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 6.738] (II) Module synaptics: vendor="X.Org Foundation"
    [ 6.738] compiled for 1.13.0, module version = 1.6.2
    [ 6.738] Module class: X.Org XInput Driver
    [ 6.738] ABI class: X.Org XInput driver, version 18.0
    [ 6.738] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 6.738] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 6.738] (**) Option "Device" "/dev/input/event9"
    [ 6.740] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5768
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4758
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 6.740] (**) Option "FingerLow" "35"
    [ 6.740] (**) Option "FingerHigh" "45"
    [ 6.740] (**) Option "ClickPad" "true"
    [ 6.740] (**) Option "EmulateMidButtonTime" "0"
    [ 6.740] (**) Option "HorizTwoFingerScroll" "on"
    [ 6.740] (**) Option "TapButton1" "1"
    [ 6.740] (**) Option "TapButton2" "2"
    [ 6.740] (**) Option "TapButton3" "3"
    [ 6.740] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 6.740] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 6.740] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 6.740] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 6.740] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
    [ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 6.741] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 6.741] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 6.741] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 6.742] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 6.742] (II) No input driver specified, ignoring this device.
    [ 6.742] (II) This device may have been added with another device file.
    [ 6.742] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 6.742] (II) No input driver specified, ignoring this device.
    [ 6.742] (II) This device may have been added with another device file.
    [ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 21764432
    [ 6.747] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
    [ 6.747] failed to find screen to remove
    [ 6.747] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1 0
    [ 6.747] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 0
    [ 6.747] (II) config/udev: removing device Video Bus
    [ 6.773] (II) evdev: Video Bus: Close
    [ 6.773] (II) UnloadModule: "evdev"
    [ 6.773] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    [ 6.773] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 6.773] (II) Using input driver 'evdev' for 'Video Bus'
    [ 6.773] (**) Video Bus: always reports core events
    [ 6.773] (**) evdev: Video Bus: Device: "/dev/input/event10"
    [ 6.773] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 6.773] (--) evdev: Video Bus: Found keys
    [ 6.773] (II) evdev: Video Bus: Configuring as keyboard
    [ 6.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
    [ 6.773] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 6.773] (**) Option "xkb_rules" "evdev"
    [ 6.773] (**) Option "xkb_model" "evdev"
    [ 6.773] (**) Option "xkb_layout" "us"
    [ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1 0
    [ 6.774] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1 0
    [ 7.569] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event11)
    [ 7.569] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
    [ 7.569] (II) Using input driver 'evdev' for 'USB2.0 Camera'
    [ 7.569] (**) USB2.0 Camera: always reports core events
    [ 7.569] (**) evdev: USB2.0 Camera: Device: "/dev/input/event11"
    [ 7.569] (--) evdev: USB2.0 Camera: Vendor 0x5ca Product 0x18c6
    [ 7.569] (--) evdev: USB2.0 Camera: Found keys
    [ 7.569] (II) evdev: USB2.0 Camera: Configuring as keyboard
    [ 7.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11/event11"
    [ 7.569] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 11)
    [ 7.569] (**) Option "xkb_rules" "evdev"
    [ 7.569] (**) Option "xkb_model" "evdev"
    [ 7.569] (**) Option "xkb_layout" "us"
    [ 24.939] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 24.939] (II) intel(0): Using hsync ranges from config file
    [ 24.939] (II) intel(0): Using vrefresh ranges from config file
    [ 24.939] (II) intel(0): Printing DDC gathered Modelines:
    [ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 24.939] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 24.939] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 24.989] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
    [ 25.055] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 25.055] (II) intel(0): Using hsync ranges from config file
    [ 25.055] (II) intel(0): Using vrefresh ranges from config file
    [ 25.055] (II) intel(0): Printing DDC gathered Modelines:
    [ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 25.055] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 25.055] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 25.150] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 25.150] (II) intel(0): Using hsync ranges from config file
    [ 25.150] (II) intel(0): Using vrefresh ranges from config file
    [ 25.150] (II) intel(0): Printing DDC gathered Modelines:
    [ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 25.150] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 25.150] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 25.274] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 25.274] (II) intel(0): Using hsync ranges from config file
    [ 25.274] (II) intel(0): Using vrefresh ranges from config file
    [ 25.274] (II) intel(0): Printing DDC gathered Modelines:
    [ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 25.274] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 25.274] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 25.387] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 25.387] (II) intel(0): Using hsync ranges from config file
    [ 25.387] (II) intel(0): Using vrefresh ranges from config file
    [ 25.387] (II) intel(0): Printing DDC gathered Modelines:
    [ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 25.387] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 25.387] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 25.518] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 25.518] (II) intel(0): Using hsync ranges from config file
    [ 25.518] (II) intel(0): Using vrefresh ranges from config file
    [ 25.518] (II) intel(0): Printing DDC gathered Modelines:
    [ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 25.518] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 25.518] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 25.676] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 25.676] (II) intel(0): Using hsync ranges from config file
    [ 25.676] (II) intel(0): Using vrefresh ranges from config file
    [ 25.676] (II) intel(0): Printing DDC gathered Modelines:
    [ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 25.676] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 25.676] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2)
    [ 29.373] (II) No input driver specified, ignoring this device.
    [ 29.373] (II) This device may have been added with another device file.
    [ 29.373] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12)
    [ 29.373] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall"
    [ 29.373] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse'
    [ 29.373] (**) Bluetooth Laser Travel Mouse: always reports core events
    [ 29.373] (**) evdev: Bluetooth Laser Travel Mouse: Device: "/dev/input/event12"
    [ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Vendor 0x46d Product 0xb008
    [ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found 12 mouse buttons
    [ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found scroll wheel(s)
    [ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found relative axes
    [ 29.373] (--) evdev: Bluetooth Laser Travel Mouse: Found x and y relative axes
    [ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Configuring as mouse
    [ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: Adding scrollwheel support
    [ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5
    [ 29.374] (**) evdev: Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 29.374] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:33/input12/event12"
    [ 29.374] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 12)
    [ 29.374] (II) evdev: Bluetooth Laser Travel Mouse: initialized for relative axes.
    [ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1
    [ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0
    [ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000
    [ 29.374] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4
    [ 589.381] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 589.381] (II) intel(0): Using hsync ranges from config file
    [ 589.381] (II) intel(0): Using vrefresh ranges from config file
    [ 589.381] (II) intel(0): Printing DDC gathered Modelines:
    [ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 589.381] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 589.381] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 589.433] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
    [ 1442.644] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 1442.644] (II) intel(0): Using hsync ranges from config file
    [ 1442.644] (II) intel(0): Using vrefresh ranges from config file
    [ 1442.644] (II) intel(0): Printing DDC gathered Modelines:
    [ 1442.644]Hey all,
    Here is the issue:
    I have sony svz13114gxx laptop with xfce4 DE, i just tried to hook up external vga monitor to laptop and everything configures right with this run in normal session:
    [code]
    xrandr --output eDP1 --mode 1920x1080
    xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync
    xrandr --addmode VGA1 1920x1200_60.00
    xrandr --output VGA1 --mode 1920x1200_60.00
    xrandr --output VGA1 --left-of eDP1
    [/code]
    Obviously when i reboot this is not persistent, so then i put this stuff in my /etc/X11/xorg.conf.d/20-intel.conf:
    [code]
    Section "Device"
    Identifier "Intel Graphics"
    Driver "intel"
    Option "AccelMethod" "sna"
    Option "monitor-eDP1" "eDP1"
    Option "monitor-VGA1" "VGA1"
    EndSection
    Section "Monitor"
    Identifier "VGA1"
    Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -HSync +VSync
    Option "PreferredMode" "1920x1200_60.00"
    EndSection
    Section "Monitor"
    Identifier "eDP1"
    Option "PreferredMode" "1920x1080"
    Option "Primary" "true"
    Option "Position" "1920 0"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "Intel Graphics"
    Monitor "eDP1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection[/code]
    This is where the problems start. On reboot Slim desktop manager seems to be stretched properly across the two monitors, but the I login and the display switches back to being mirrored, my xfce gtk2 theme is disabled in favor of somee default looking one, my icons are back to default, and none of my custom keyboard shorcuts work.
    I can then use xrandr to get the displays in extended mode again, but the themes and icons etc do not revert. And on reboot, i have the same issue.
    I have tried the sourcing ~/.xprofile, ~/.xinitrc, and ~/.config.xfce4/xinitrc routes, putting the xrandr cammands above the exec lines and that doesn't even enable VGA1.
    I have been to all these places
    [code]
    https://wiki.ubuntu.com/X/Config/Resolution#Xrandr_Graphical_Front_End_GUI
    http://ilkinbalkanay.blogspot.com/2008/01/extended-desktop-configuration-with.html
    https://bbs.archlinux.org/viewtopic.php?id=98747
    https://www.google.com/search?q=arch%20xrandr&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np
    https://wiki.archlinux.org/index.php/Execute_commands_after_X_start
    http://intellinuxgraphics.org/dualhead.html
    http://mac.linux.be/content/setting-xorgconf-manually-xrandr#3
    https://www.google.com/search?q=arch%20dual%20monitors%20The%20last%20active%20output%20must%20not%20be%20disabled%2C%20the%20system%20would%20be%20unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&source=hp&channel=np#hl=en&safe=off&client=firefox-a&tbo=d&rls=org.mozilla:en-US%3Aofficial&channel=np&sclient=psy-ab&q=xfce+%22Selected+output+not+disabled%22&oq=xfce+%22Selected+output+not+disabled%22&gs_l=serp.3...1694.1694.3.2205.1.1.0.0.0.0.97.97.1.1.0.les%3Bcrnk_timediscounta..0.0...1c.1.O4EDj7DaWlA&pbx=1&fp=1&bpcl=39468505&biw=984&bih=936&cad=b&sei=aKC_UIKvJ6GA0AGTg4HwBg&sei=FKS_UMuwJdPU0gHorICQBA&bav=on.2,or.r_gc.r_pw.r_qf.&sei=2MK_UOaAJ5Ph0wGbsoHICg
    https://wiki.archlinux.org/index.php/Xfce#Customizing_Startup_Applications
    http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
    https://wiki.archlinux.org/index.php/Xorg#Monitor_settings
    [/code]
    Even after much research, still no luck.
    this might be useful:
    http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631225
    Anyone have any ideas?
    here is my Xorg0.log
    [code]
    [ 3.490]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 3.490] X Protocol Version 11, Revision 0
    [ 3.490] Build Operating System: Linux 3.6.3-1-ARCH x86_64
    [ 3.490] Current Operating System: Linux tcz 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
    [ 3.490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d23251af-35fa-426b-a7d5-5aa2f0a5b87d ro quiet pcie_aspm=force i915.i915_enable_rc6=1
    [ 3.490] Build Date: 08 November 2012 07:09:29PM
    [ 3.490]
    [ 3.490] Current version of pixman: 0.28.0
    [ 3.490] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 3.490] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3.490] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 16:25:21 2012
    [ 3.492] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3.494] (==) No Layout section. Using the first Screen section.
    [ 3.494] (**) |-->Screen "Default Screen" (0)
    [ 3.494] (**) | |-->Monitor "eDP1"
    [ 3.494] (**) | |-->Device "Intel Graphics"
    [ 3.494] (==) Automatically adding devices
    [ 3.494] (==) Automatically enabling devices
    [ 3.494] (==) Automatically adding GPU devices
    [ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 3.504] Entry deleted from font path.
    [ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 3.504] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 3.504] Entry deleted from font path.
    [ 3.504] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 3.504] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 3.504] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3.504] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3.504] (II) Loader magic: 0x7fcc40
    [ 3.504] (II) Module ABI versions:
    [ 3.504] X.Org ANSI C Emulation: 0.4
    [ 3.504] X.Org Video Driver: 13.1
    [ 3.504] X.Org XInput driver : 18.0
    [ 3.504] X.Org Server Extension : 7.0
    [ 3.505] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 6.276] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64
    [ 6.276] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 6.276] Initializing built-in extension Generic Event Extension
    [ 6.276] Initializing built-in extension SHAPE
    [ 6.276] Initializing built-in extension MIT-SHM
    [ 6.276] Initializing built-in extension XInputExtension
    [ 6.276] Initializing built-in extension XTEST
    [ 6.276] Initializing built-in extension BIG-REQUESTS
    [ 6.276] Initializing built-in extension SYNC
    [ 6.276] Initializing built-in extension XKEYBOARD
    [ 6.276] Initializing built-in extension XC-MISC
    [ 6.276] Initializing built-in extension SECURITY
    [ 6.276] Initializing built-in extension XINERAMA
    [ 6.276] Initializing built-in extension XFIXES
    [ 6.276] Initializing built-in extension RENDER
    [ 6.276] Initializing built-in extension RANDR
    [ 6.276] Initializing built-in extension COMPOSITE
    [ 6.276] Initializing built-in extension DAMAGE
    [ 6.276] Initializing built-in extension MIT-SCREEN-SAVER
    [ 6.276] Initializing built-in extension DOUBLE-BUFFER
    [ 6.276] Initializing built-in extension RECORD
    [ 6.276] Initializing built-in extension DPMS
    [ 6.276] Initializing built-in extension X-Resource
    [ 6.276] Initializing built-in extension XVideo
    [ 6.276] Initializing built-in extension XVideo-MotionCompensation
    [ 6.276] Initializing built-in extension XFree86-VidModeExtension
    [ 6.276] Initializing built-in extension XFree86-DGA
    [ 6.276] Initializing built-in extension XFree86-DRI
    [ 6.276] Initializing built-in extension DRI2
    [ 6.276] (II) LoadModule: "glx"
    [ 6.278] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 6.281] (II) Module glx: vendor="X.Org Foundation"
    [ 6.281] compiled for 1.13.0, module version = 1.0.0
    [ 6.281] ABI class: X.Org Server Extension, version 7.0
    [ 6.281] (==) AIGLX enabled
    [ 6.281] Loading extension GLX
    [ 6.281] (II) LoadModule: "intel"
    [ 6.281] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 6.285] (II) Module intel: vendor="X.Org Foundation"
    [ 6.285] compiled for 1.13.0.901, module version = 2.20.14
    [ 6.285] Module class: X.Org Video Driver
    [ 6.285] ABI class: X.Org Video Driver, version 13.1
    [ 6.285] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 6.286] (++) using VT number 7
    [ 6.288] (II) intel(0): using device path '/dev/dri/card0'
    [ 6.288] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 6.288] (==) intel(0): RGB weight 888
    [ 6.288] (==) intel(0): Default visual is TrueColor
    [ 6.288] (**) intel(0): Option "AccelMethod" "sna"
    [ 6.288] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 6.289] (**) intel(0): Framebuffer tiled
    [ 6.289] (**) intel(0): Pixmaps tiled
    [ 6.289] (**) intel(0): 3D buffers tiled
    [ 6.289] (**) intel(0): Throttling enabled
    [ 6.289] (**) intel(0): Delayed flush enabled
    [ 6.289] (**) intel(0): "Tear free" disabled
    [ 6.289] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 6.289] (II) intel(0): Output eDP1 using monitor section eDP1
    [ 6.289] (**) intel(0): Option "PreferredMode" "1920x1080"
    [ 6.289] (**) intel(0): Option "Position" "1920 0"
    [ 6.289] (**) intel(0): Option "Primary" "true"
    [ 6.289] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 6.293] (II) intel(0): Output VGA1 using monitor section VGA1
    [ 6.293] (**) intel(0): Option "PreferredMode" "1920x1200_60.00"
    [ 6.294] (II) intel(0): Output HDMI1 has no monitor section
    [ 6.336] (II) intel(0): Output DP1 has no monitor section
    [ 6.337] (II) intel(0): EDID for output eDP1
    [ 6.337] (II) intel(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
    [ 6.337] (II) intel(0): Year: 2012 Week: 24
    [ 6.337] (II) intel(0): EDID Version: 1.4
    [ 6.337] (II) intel(0): Digital Display Input
    [ 6.337] (II) intel(0): 8 bits per channel
    [ 6.337] (II) intel(0): Digital interface is DisplayPort
    [ 6.337] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 6.337] (II) intel(0): Gamma: 2.20
    [ 6.337] (II) intel(0): No DPMS capabilities specified
    [ 6.337] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 6.337] (II) intel(0): First detailed timing is preferred mode
    [ 6.337] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 6.337] (II) intel(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
    [ 6.337] (II) intel(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
    [ 6.337] (II) intel(0): Manufacturer's mask: 0
    [ 6.337] (II) intel(0): Supported standard timings:
    [ 6.337] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 6.337] (II) intel(0): Supported detailed timing:
    [ 6.337] (II) intel(0): clock: 162.8 MHz Image Size: 291 x 164 mm
    [ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
    [ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
    [ 6.337] (II) intel(0): Supported detailed timing:
    [ 6.337] (II) intel(0): clock: 99.9 MHz Image Size: 291 x 164 mm
    [ 6.337] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
    [ 6.337] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
    [ 6.337] (II) intel(0): Monitor name: Sony LCD
    [ 6.337] (II) intel(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
    [ 6.337] (II) intel(0): EDID (in hex):
    [ 6.337] (II) intel(0): 00ffffffffffff00367f250001010101
    [ 6.337] (II) intel(0): 18160104a51d1078020f159a564b8b26
    [ 6.337] (II) intel(0): 205054000000d1c00101010101010101
    [ 6.337] (II) intel(0): 0101010101019c3f803172380f402020
    [ 6.337] (II) intel(0): 330023a4100000180727806971380f40
    [ 6.337] (II) intel(0): 2020330023a410000018000000fc0053
    [ 6.337] (II) intel(0): 6f6e79204c43440a20202020000000fd
    [ 6.337] (II) intel(0): 00273d2b4211000a2020202020200013
    [ 6.337] (II) intel(0): EDID vendor "MS_", prod id 37
    [ 6.337] (II) intel(0): Using EDID range info for horizontal sync
    [ 6.337] (II) intel(0): Using EDID range info for vertical refresh
    [ 6.337] (II) intel(0): Printing DDC gathered Modelines:
    [ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
    [ 6.337] (II) intel(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 6.337] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
    [ 6.337] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 6.337] (II) intel(0): Printing probed modes for output eDP1
    [ 6.337] (II) intel(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz UeP)
    [ 6.337] (II) intel(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
    [ 6.338] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 6.338] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.338] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 6.338] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 6.338] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.338] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 6.338] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.338] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
    [ 6.338] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 6.338] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 6.338] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 6.338] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.338] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 6.338] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 6.338] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 6.343] (II) intel(0): EDID for output VGA1
    [ 6.343] (II) intel(0): Printing probed modes for output VGA1
    [ 6.343] (II) intel(0): Modeline "1920x1200_60.00"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz UP)
    [ 6.343] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.344] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.344] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.344] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 6.344] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.344] (II) intel(0): EDID for output HDMI1
    [ 6.386] (II) intel(0): EDID for output DP1
    [ 6.386] (II) intel(0): Output eDP1 connected
    [ 6.386] (II) intel(0): Output VGA1 connected
    [ 6.386] (II) intel(0): Output HDMI1 disconnected
    [ 6.386] (II) intel(0): Output DP1 disconnected
    [ 6.386] (II) intel(0): Using user preference for initial modes
    [ 6.386] (II) intel(0): Output eDP1 using initial mode 1920x1080
    [ 6.386] (II) intel(0): Output VGA1 using initial mode 1920x1200_60.00
    [ 6.386] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.386] (**) intel(0): Display dimensions: (290, 160) mm
    [ 6.386] (**) intel(0): DPI set to (336, 190)
    [ 6.386] (II) Loading sub module "dri2"
    [ 6.386] (II) LoadModule: "dri2"
    [ 6.387] (II) Module "dri2" already built-in
    [ 6.387] (==) Depth 24 pixmap format is 32 bpp
    [ 6.387] (II) intel(0): SNA initialized with IvyBridge backend
    [ 6.387] (==) intel(0): Backing store disabled
    [ 6.387] (==) intel(0): Silken mouse enabled
    [ 6.387] (II) intel(0): HW Cursor enabled
    [ 6.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.388] (==) intel(0): DPMS enabled
    [ 6.388] (II) intel(0): [DRI2] Setup complete
    [ 6.388] (II) intel(0): [DRI2] DRI driver: i965
    [ 6.388] (II) intel(0): direct rendering: DRI2 Enabled
    [ 6.388] (WW) intel(0): Option "PreferredMode" is not used
    [ 6.388] (WW) intel(0): Option "Primary" is not used
    [ 6.388] (WW) intel(0): Option "Position" is not used
    [ 6.388] (==) intel(0): hotplug detection: "enabled"
    [ 6.388] (--) RandR disabled
    [ 6.410] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.410] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.410] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.410] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.410] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.410] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.410] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.410] (II) AIGLX: Loaded and initialized i965
    [ 6.410] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.411] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
    [ 6.500] (II) intel(0): switch to mode 1920x1200 on crtc 5 (pipe 1)
    [ 6.663] (II) intel(0): Setting screen physical size to 1016 x 317
    [ 6.703] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
    [ 6.703] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 6.703] (II) LoadModule: "evdev"
    [ 6.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.706] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.706] compiled for 1.13.0, module version = 2.7.3
    [ 6.706] Module class: X.Org XInput Driver
    [ 6.706] ABI class: X.Org XInput driver, version 18.0
    [ 6.706] (II) Using input driver 'evdev' for 'Video Bus'
    [ 6.706] (**) Video Bus: always reports core events
    [ 6.706] (**) evdev: Video Bus: Device: "/dev/input/event10"
    [ 6.706] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 6.706] (--) evdev: Video Bus: Found keys
    [ 6.706] (II) evdev: Video Bus: Configuring as keyboard
    [ 6.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input10/event10"
    [ 6.706] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 6.706] (**) Option "xkb_rules" "evdev"
    [ 6.706] (**) Option "xkb_model" "evdev"
    [ 6.706] (**) Option "xkb_layout" "us"
    [ 6.732] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event3)
    [ 6.732] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
    [ 6.732] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
    [ 6.732] (**) Sony Vaio Keys: always reports core events
    [ 6.732] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event3"
    [ 6.732] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
    [ 6.732] (--) evdev: Sony Vaio Keys: Found keys
    [ 6.732] (II) evdev: Sony Vaio Keys: Configuring as keyboard
    [ 6.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input3/event3"
    [ 6.732] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
    [ 6.732] (**) Option "xkb_rules" "evdev"
    [ 6.732] (**) Option "xkb_model" "evdev"
    [ 6.732] (**) Option "xkb_layout" "us"
    [ 6.732] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event4)
    [ 6.732] (II) No input driver specified, ignoring this device.
    [ 6.732] (II) This device may have been added with another device file.
    [ 6.733] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
    [ 6.733] (II) No input driver specified, ignoring this device.
    [ 6.733] (II) This device may have been added with another device file.
    [ 6.733] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.733] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.733] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.733] (**) Power Button: always reports core events
    [ 6.733] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.733] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.733] (--) evdev: Power

    Have you ever tried 'arandr'? It's a GUI for xrandr; it could be useful.
    I used this config with nouveau, now I've successfully created my xorg.conf with nvidia blobs, but this one worked~
    Section "Device"
    Identifier "NVIDIA GeForce GT320"
    Driver "nouveau"
    Option "Monitor-DVI-I-1" "BENQ G2450"
    Option "Monitor-HDMI-1" "LG W2442PA"
    EndSection
    Section "Monitor"
    Identifier "BENQ G2450"
    Option "Primary" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    Option "Position" "1080 612"
    EndSection
    Section "Monitor"
    Identifier "LG W2442PA"
    Option "LeftOf" "BENQ G2450"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "59.9"
    Option "Position" "0 0"
    Option "Rotate" "Left"
    EndSection
    Section "Screen"
    Identifier "Primary Screen"
    Device "NVIDIA GeForce GT320"
    Monitor "BENQ G2450"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Virtual 3000 1920
    EndSubSection
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Primary Screen"
    EndSection
    I'm using XFCE as well, 2 monitors, the left one rotated 90º. The main difference it's that I've the 'Virtual' option inside 'SubSection'; not sure if it's relevant.

Maybe you are looking for

  • URL class is not working in Java 1.4. However works in Java 1.3

    I have a Java program which uses URL classes through FTP connection to open any files. It works fine in Java 1.3 version. However the same program fails with java.io.FileNotFoundException: at sun.net.www.protocol.ftp.FtpURLConnection.getInputStream w

  • ORA-1653: unable to extend table (but tablespace is not full!)

    Hi folks, I was navigating through the Alert Log file and I'm strangely noticing the error: ORA-1653: unable to extend table PROMO.DETAILS by 40973 in tablespace PROMO I'm defining it as strange because: (1) The tablespace is only 65% full (there are

  • GRC AC Connectors

    Hello Experts, Is the following process correct for creating connectors for GRC AC 5.3: 1. JCO connector (Meta & Model) is created for a system say P6E and client 100 2. Using this, a system connector P6E100 is created in RAR 3. A JCO destination is

  • Can't connect to my Dlink NAS

    My imac's harddrive died (faulty - 3 problem with it in 12 months) and when i got it back, the os had been upgraded to X vs 10.7.5 - as a consequence (i think) the computer has lost the ability to identify my dlink dns-323 NAS in Finder. When i searc

  • SQLException - Creating a ViewObject

    Hi! I am creating a viewobject out of a sqlstatement with the wizzard. I use a very simple Statement: select * from pdalle When I test the query, JDeveloper shows me the following error message. I do not know where the 'where 1=2' part comes from. I