Icons at bottom of screen won't work

The icons at bottom of the screen won't work. I can slide them, but they won't tap for use.

Try:
- Reset the iOS device. Nothing will be lost      
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:                                               
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.                       
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar                                                              

Similar Messages

  • Wide screen won't work

    My wide screen won't work how do I reset it?

    Is there a little lock next to your battery icon?

  • HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

    IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
    It might have happened when I was accessing my camera bypassing the lock screen!
    All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

    I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

  • IPod screen won't work?

    so I opened up my ipod and reassembled it back, and then this happens. The iTouch does work, but the image of the ipod on the screen won't work? Help what do I do!!

    Seems like you have a bad connection or you broke a conductor in a ribbon cable. Or maybe a bad digitizer. ir logic board.

  • I drop my iPod on the floor and now I only can use the home and power button and the screen won't work

    I Drop my iPod on the floor and now the screen won't work but it looks perfect but when I touch it it doesn't do anything and the home and the power button work so can someone help

    Try the remaining items of:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I dropped my iphone 4 into the water and then i tried the rice method. The rice solved the water issue but now the screen won't work. what should i do?

    I  dropped my iphone 4 into the water and then i tried the rice method. The rice solved the water issue but now the screen won't work. what should i do?

    I guess your definition of "solved" is different from most...
    Make an appointment at the genius bar of your local Apple Store and get an out of warranty replacement.

  • My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.

    My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.

    Did the trick!  Not sure what I did to cause the screen to go numb, but this worked perfectly!!!  I cleaned the screen and must have inadvertently selected something that locked the screen.  This perfect solution kept me from having to run to the Apple Store.  Many thanks.

  • My screen won't work the only time it does is when i enter in my passcode. what is wrong with it?

    my screen won't work the only time it does is when i enter in my passcode. what is wrong with it?

    Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try connecting the iPod to your computer and restoring the iPod from backup via iTunes.
    - If itunes does not see the iPod, see if placing the iPod in recovery mode will make it visible so you can restire it.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • HT201406 What do I do if my Ipod touch 4 will turn on, but the touch screen won't work so I can't unlock it?

    This has happened 3 times... my Ipod touch 4 will be fine one minute,but then the next time I turn it on the screen won't pick up when I touch the screen it wont pick it up. I can't unlock it or completely turn it off becasue the touch screen won't work, but I know it is still alive becasue when you press the home button my lock screen turns up. if you know how to fix this bug please tell me how.

    Did you try to connect in recovery mode and set it up as new device?
    iOS: Unable to update or restore
    How to back up your data and set up as a new device

  • Satellite A300 - screen won't work sometimes

    Ok so first of all I want to start by telling you that I am a complete noob when it comes to computers, and also my native language is not english, but i'll try my best to make you understand my problem.
    Sometimes, when I try to turn on my laptop, the screen won't work. I hear the fan running, those little lights on the keyboard light up, but the screen just remains black...this happened for like 3 days until today, I got home and it magically worked. This same thing happened like a month ago...what is going on? :s

    On this virtual way it is not easy to offer exact diagnostic.
    What we can do here is nothing but speculation about possible reasons.
    A300 is not the newest model so there can be some problem with connection between mainboard and the display.
    Next time when this happen, try to move display or press gently the notebook below the display just to see if this will help or not.
    At the end I must say that only service can help you with this. With other words they can disassemble the notebook and check the display cable.

  • My iPad screen won't work

    I have an iPad 2 and recently it has stopped working all of a sudden. When i press the power button on my iPad, it turns on but it is just a blank screen and when i turn it off it flashes white. Sometimes when i turn it on my wallpaper flashes on the screen for a split second but goes right back to the blank screen so i know that the screen isn't broken. I have tried charging it, holding down the power button to shut it down completely and I've tried holding down both the power button and the home button, nothing works. When i try to sync it to iTunes it asks me to type my passcode in on the iPad but i can't because it won't work.
    Any ideas?

    Hello Nathan_J_M,
    Thank you for choosing Apple Support Communities. i am very pleased to help you.
    Reset to factory settings via recovery mode
    So, what you'll have to do is enter recovery mode and fully reset your iPad. Yes, you will lose all your data, but it's better than buying an iPad and wasting a hog lots of money pit. If you have a backup, it will be great.
    Entering recovery mode:
    Force your iPad to shut down. Press and hold on both power button and home button at the same time until your iPad turns off. Now, follow my steps:
    •1: Get your PC/Mac ready
    •2: On that PC/Mac, make sure you have the latest version of iTunes
    •3: Connect the large end of the charger in the computer, but not the small end. (Connect this end to the computer:)
    •4: Open iTunes on your PC/Mac
    •5: Now that you're on iTunes, get the small side of the cable (the one to connect to the iPad with) and get ready
    •6: Press the home button on your iPad, while your pressing the home button, plug in the other small part of the iPad quickly to your iPad. Keep pressing the home button to your iPad until you see this:
    You are now in recovery mode. Restore your iDevice to factory settings. If you have a backup, restore your iPad from that backup or you'll lose everything on that device. Sadly, if you don't have a backup, everything will be gone, that includes photos, apps, contacts, etc.
    for more information on how to enter recovery mode on your iPad, go here: If you can't update or restore your iOS device
    Regards,
    Ab

  • Upgraded to 2.0.1 and the top screen won't work with some of the apps

    Ever since I upgraded to 2.0.1, when I open any of the applications the top part of the screen won't respond with some of the applications. I know that the screen is working and not damaged because on the main menu application prompt I can click into the apps on the top part of the screen, but as soon as I get inside some of the applications weather it be the ipod or texting the top part of the screen won't respond. Anyone else have this problem and have solution for the problem

    I had a similar issue when I upgraded last night to 2.0.1...everything went fine no issues last night that I could see...though I didn't make a single call until this morning after doing the upgrade...went to call in to work this morning and couldn't hear them they couldn't hear me and there was no sound whatsoever...turns out that somehow the 2.0.1 update caused my iPhone to go into a staus where it though it had my headphones in all the time...this resolved by following the information on this support document ( http://support.apple.com/kb/TS1630?viewlocale=en_US ) finally was a reset of the iPhone (step #7) that seemed to resolve it for me...you might want to try this too.

  • Screen won't work, sometimes - N95 8GB

    Hi,
    Had a few problems as of lately with my N95 8GB, not really impressed with it to be honest.
    Amongst other things, the worst problem would have to be the slider mechanism.
    - I'm not sure how to explain it properly as it's complicated, so please bare with me -
    Every time I move the slider from Landscape(music player) to Portrait(key-pad and all) the screen goes black until the bottom of the slider reaches above the 7, 8, 9 keys. Essentially, it doesn't work from starting to move it to the Portrait mode from the Neutral position, to just before revealing the whole 7, 8, 9 keys.
    Music and the like play in the background through all this happening, as the phone just goes into the "locked mode" and the screen turns off, so the phone is still on.
    Ofcourse there are exceptions, like when I move the slider up and down fast, and seem to trick the phone, but I'm guessing that's mostly irrelevant.
    tl;dr The screen doesn't work for the middle third of the entire slider movement.
    Not too mention the secondary camera not working - period, or my calls only working on loud-speaker.
    Yep, this is the least of my worries.
    Anyway, thanks for any help in advance, hope you can help.
    And one final note, I'm stuck on firmware v 11.x something, and I run my computer on Vista. Since NSU doesn't support Vista, is their anyway to update it to v 20.x without going to a Care Center or whatever they are called?
    Message Edited by reffy on 25-May-2008 02:43 PM

    Hi All,
    Probably the Secondary camera of my N95 8 GB purchased just a week ago is not working
    I discovered it when i used the secondary camera yesterday for the first time
    When i use the sec. camera, only a bright yellow screen appears. The pictures taken are just a combination of red & yellow dots. Can anyone help ??

  • Encore WT8 touch screen won't work, prevents me from logging in

    I have just bought this tablet but it is a Dabs refurbished model, so not sure of its history. I went through the setup process and brought it on holiday. I discovered that once it was setup, every time it went into sleep mode or was powered off, the touch screen became unresponsive after it powered back up. I don't have an OTG cable, or a keyboard/mouse for that matter. In a small town where it won't be possible to buy one. May just have to wait until I get back and can use a cable and keyboard to log in. Not sure what the pattern is but from time to time, it has reacted to touch and allowed me to log in. When it did, I performed all windows updates, including drivers that were suggested. I have an old XP laptop which I am using now and once when I plugged it in via USB, it got the screen working for long enough to let me log in but that won't work now.  I tried to log in from my Lumia using RDP but it says it can't. May just be the version of 8.1 that's on the tablet.  I can get into the BIOS menu and the touch screen works in there. It is at V2.00 and the tablet is a PDW0AE-00900PEN Any other suggestions or should I give up and enjoy my holiday?

    The screen rotates as normal. I tried resetting the device but it doesn't work. In the device manager, it shows that the I2C HID device has a problem. It fails to start. This doesn't change after a reset. I dug a little deeper and the driver is hidi2c.sys. There doesn't seem to be a newer version of the driver. I did some reading and found people commenting that Toshiba aren't very good at fixing this sort of driver issue. it also may be that a windows update has caused a conflict which may be fixed by Microsoft. Either way, I can't see any way for me to fix this besides resetting my tablet to factory and preventing windows updates. I may do that once I am somewhere with more resources around me.

  • Touch screen won't work, and it's on lock

    I have this ipod that I've been trying to fix for someone, as well as load up songs from itunes. I've successfully synced songs to it to it's full capacity (8G). However, when it was done, I ejected it and tried to listen to it to see if it was working properly. The screen is locked, as well as the touch screen isn't working as if it's completely dead. I've never had this problem as I am familiar with Ipod Touches and Nanos. Does anyone have any remedies or suggestions?? Gonna try other things in the meantime.

    Hi Wazzup483, Im having the same problem you had. Screen locked, touch screen not responding and it won't stop playing music. It licked while I was listening to music. Took out my pocket and it was locked, guess I hit something.
    HELP :o)
    Thanks

Maybe you are looking for

  • Show Error string for all the components in a form at a time

    How do I show all the error strings for all the components in the form when the submit button is clicked?

  • How do I enable the bookmarks button in Fennec?

    Every screen shot of Fennec I find has a bookmarks button to the left of the address bar, but I've installed it on my Nexus One, and while I can add bookmarks, I can't view them. How do you enable the bookmark button on Fennec? == User Agent == Mozil

  • Excessive LDAP Queries from WLS 6.0 SP2 RP3

    We have an application served from WLS 6.0. Our current version of WLS is: Service Pack 2 05/24/2001 11:55:28 #117037 RP3 for 6.0 SP2 02/21/2002 17:46:45 #167070 WLS has been configured to query an LDAP server for user authentication. The issue we ar

  • Sound balence

    I've been having a problem with my ipod's sound. The sound is only coming out of one earbud, and i gotta hold it in a certain postion to get it to work. What should i do, and if i need to get it repaired, how much would it cost to get it fixed?

  • What is WiFi networking in location settings of IOS 8?

    Can anyone tell me .What is WiFi networking in Security>Location settings>system services > WiFi networking, does for IPHONE