Icons disapear after fullscreen MSDOS window

Hi there,
I'm currently experiencing problems with Swing Icons under Windows with jdk1.4.1 !
They suddenly disappear or are corrupted if I maximize and then minimize the DOS Window. I've read in the bug database that there is this problem with a specific grafic chip - but this is not my case ! I'm experiencing this both on a Compaq Notebook with Win2000 and a graf
chip ATI RAGE Mobility AGP Driver 5.0.2195.4045 and with a Windows XP Notebook (currently don't know graf chip).
To be sure the problem wasn't me and my code I downloaded and tested this with the "ButtonDemo.java" Code I got from the How to Use Buttons,... - Tutorial. With same result !!
Here is a further description of what I do: I first start ButtonDemo.java from a Dos Shell with java. I maximize the DOS shell to fullscreen, hit Enter a few times and then minimize it. Now I push one of the buttons or pass another application window over the ButtonDemo. The Button(s) are gone, corrupted or look strange !!
Now I do the following: Maximise once again the DOS Shell and minimize it again. Hey ! The buttons are back !!! BUT -- pass an application window over it or hit a button and - OH NO!!!!! They are corrupted again !
Does anyone have the same problem or an explanaton for this ? What is happening here ? Should I report this as a bug ?
Thanks
Claudio

Another update:
The problem with the DOS Window exists also on a Yakumo Notebook with Windows XP and a SIS 630/730 S-VGA Graph Chipset.
Once again: does anyone else ever had these porblems ?

Similar Messages

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

Photosmart c6180 driver disapears after restarting Windows 7

Problem is: Photosmart c6180 driver disapears after restarting Windows 7
Operating System is: Windows 7
Connection is Wireless
Printer is Photosmart c6180
Driver is for Windows
7 and has been downloaded multiple several times from the HP Website
HP Support was not help: they could not even get the printer to work even when it was wired USB since they refused to remove the driver first. I have old computers and use USB Hubs so it puts a strain on the resources to hook up to much on the USB Ports evern with the extra power they have.
I have removed the driver and reinstalled it at least 2-3 times a month since January. The computer sees and installs the printer and it works fine as long as I do not shut down the computer. However whenever there are any updates for windows the computer needs to be restarted and then the printer won't work anymore.
I tryed this today which I found on the internet and it did not work either.
Click on another printer or the Microsoft XPS Document Writer
Click on Printer server properties in the top menu
Choose Drivers in the Installed printer drivers select the printer that was uninstalled in step 3.
Click on Remove and when asked choose Remove driver and driver package and click on ok.
Install the Windows 7 software for the printer.
Does anyone have anything else I can try. I reinstall the printer driver again for the second time today and it allways works just fine if I just never had to restart the computer it would work fine.
I have reloaded th

Have you tried this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

After a software update the youtube icon disapeared from the ipad. How can i recover it?, After a software update the youtube icon disapeared from the ipad. How can i recover it?

After a software update (the instalation of ios 6), the youtube icon disapeared. How do i recover it?

YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

Impossible to update the softwares from the top CC menu. First the menu does'nt show the software on my computers and after a while of seaching, the icon disapear from the menu and no uptade. Can someone tell me why. Thank you

Impossible to update the softwares from the top CC menu. First the menu does'nt show the software on my computers and after a while of seaching, the icon disapear from the menu and no uptade. Can someone tell me why. Thank you

This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

S3-S440 no wifi after upgrading to Windows 8.1

After upgrading to windows 8.1, the wifi is not working anymore.
I cannot find the wifi driver in the device managerment and I cannot see any information about wifi driver.
I try to re-setup the driver many times and checked the wireless module was enabled in the BIOS. But it is no progressing at all. I can only access to the Internet through the wire now...
Please help me.!!!

Salheureux, welcome to the forum.
You should go into the Control Panel / Sound to assure that your sound device is set to Default. Also, right click on the speaker icon in the Taskbar / Playback devices and check that your speakers are displayed.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

WPA security Types are missing after upgrading to Windows 8.1

After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
I have done a lot of troubleshootings like
1-Reinstall Wirless original driver
2-Updating the wireless driver to the latest
3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
But the same.
Is there any way to add WPA to the security type?

Yes! It works!
To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
WPA2-enterprise.
So here I was, and Greg Seth's answer gave me an idea.
In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
0) Go to command line, preferably Administrator (not tried without).
1) C:\Windows\System32> cd \Users\<User>\Documents
2) C:\Users\<User>\Documents> netsh
3) netsh> wlan
4) netsh wlan> show profiles
5) delete profile name=<yournetwork>
Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
as many of them as possible.
9) Finish. Move back to your netsh terminal
10) netsh wlan> show profile <profilename>
without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
before.
11) netsh wlan> set profileparameter
displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
13) netsh wlan> set profileparameter
Don't exit this yet.
14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
15) It should connect. In my case atleast, it did. Verify by browsing.
16) netsh wlan> export profile name=<profile name>
In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
17) Wonder why microsoft makes things difficult for us!

URGENT: I lost the Lion Partition after repairing the Windows 7 partition

URGENT: I lost the Lion Partition after repairing the Windows 7 partition
I have recent bought a new Macbook Pro and then I start doing all the necessary setup. This is the first time I do such setup with bootcamp myself anyway.
1st: normal MacOS setup, the Lion version has been setup perfectly.
2nd: run the bootcamp and setup the Windows 7, done perfectly as well.
3rd: try to partition and resize the harddrive with the Lion installed and create 2 new FAT partitions (now 4 partitions in total: 1 for Lion, Journaled, 1 for Windows 7 in NTFS, 2 for file sharing purposes in FAT). See if I can have better partitioning to do necessary organisations.
4th: When I want to restart in Windows to see if the newly created 2 FAT partitions can be read in Windows environment and can function norally, the Windows setup does not show at the start up page when I hold the "Option" key during the startup. I then try to restart again, still no such partition but boot directly to Lion.
5th: I tried to repair the Windows 7 with the start up disc and then it worked. I can also see the 2 newly partitioned FAT drive work normally.
6th: When I want to restart in Lion, I cannot boot the Lion OS and I cannot find the start up icon on the startup page even with me holding the "Option" Key.
7th: "MacOS Installation Utility" appears. I tried to repair but cannot as I have neither the Lion setup disc with me (coz the Lion has been pre-installed) nor a time machine backup/ any other backup image to load from.
8th: Tried to "erase and install a new copy of Lion", the partition where the Lion has been previously installed cannot be shown, now indicate itself as "freespace" and not able to be selected for my "erase and reinstall" process.
9th: so I go to 2 other FAT drives to do as the instructions to try "erase" and hope the "reinstall" process can be started. But the Disk Utility ends up saying the drive cannot be dismounted/ cannot verfy...
At the end of the many tries, I tried to shut the computer down and restart again, hopefully something will work still.... the startup page now shows a disk image with ?, I guess NO OPERATION system/ drive detected for booting. So I got a piece of metals without any use now...
Anybody help? Thanks alot!!

In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support

I have installed firefox 3.2.64. When i click on the desktop icon nothing happens. The windows task manager says mozilla firefox is running but I can't see it anywhere. What might the problem be?

Question
I have installed firefox 3.2.64. When i click on the desktop icon nothing happens. The windows task manager says mozilla firefox is running but I can't see it anywhere. What might the problem be?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

How do I hide the address bar when fullscreening "popup" windows?

Sky TV's video player has a bad fullscreen implementation - you can make the player go true fullscreen but it reverts when it loses focus, so I can't multitask on my two monitors.
The best workaround I've found is to use their "pop-out" player, which opens a new "popup"-style window (locked address bar, no search bar etc.) and I can then fullscreen the window itself (rather than the player). This allows me to hide
- the window outline
- the window title bar
- the Windows start menu
and it stays fullscreened when it loses focus.
However, this does not hide the window address bar. On a normal Firefox fullscreened window this slides out of view after a short time; on the locked "popup" style window it does not.
On the offchance that treating "popup" windows differently is a deliberate Firefox security policy... can I disable it?

You only need to select the pop-up window after having opened the Browser Console or open the console before opening the pop-up to make that window the MostRecentWindow.

Reformat/Reinstall Leopard 10.5 after a Failed WIndows Partition

When trying to create a windows partition on my MacBook everything was running successfully and the screen said that it had finished the installation and needed to restart. So i did, but after restarting the Windows disc wanted me to install at the same start up screen as before.
I no longer wish to have this windows partition on my computer and i am at my real issue now. I want to start up in Leopard but the only way for me to get into the Mac OS was to insert my restore disc. I can get to the utilities menu and get to the start up disc option. My options are Windows on "untitled", the Mac OS disc, and Network. But when i go to reinstall the Mac OS there is no drive for me to install on to.
Any help is greatly appreciated.

Thanks very much. I saw a lot of info about CUPS, gutenprint, and samba out there, but not much context to it.
For folks just reading this from google:
The easiest way to add a Windows printer, in most cases, is to check Gutenprint, which is included with OS X, to see if it supports your printer. (http://gimp-print.sourceforge.net/MacOSX.php3)
If not, try searching google for "<your printer model> cups driver".
Bring up the add printer dialog under system preferences and right click on a blank space on the toolbar. Choose customize toolbar. Drag the "Advanced" icon onto the toolbar. Then, click it.
Under type, select Windows. Go down to "Print Using" and choose "Select a driver to use...". Pick your driver in the list. "SMB://" should have autofilled in the URL form. From this, you'll add the name of the PC to which the printer is attached. Say you've set its network name as Bob, for example. You'll put "smb://bob", and then you'll add the shared name of the printer. In my case, it's an Epson CX7400, and I've shared it as EpsonCX7400. Keep in mind, Mac OS doesn't like names longer than 12 characters or shares with special characters like $ and @ and things like that. (If you're unsure, you could always just share it from your Windows PC as printer1 or something.) Were that the case, your URL field would read "smb://bob/printer1". If you named it something like mine, "smb://bob/epsoncx7400". If your printer requires a username and password to print, you'll put "smb://<username>:<password>@bob/printer1", substituting your username and password in the <username> and <password> spots respectively.
Afterward, if you've done all that properly, it should work. Hopefully, anyway. It did for me. Well, it showed up anyway. I've not actually tried to print from it, yet.
Message was edited by: anjldust

Drivers issue for Lenovo u400 after upgrading to Windows 8

I recently upgraded to windows 8 an after that facing driver issue for ATI Radeon graphic card and wifi, and also cypress trackpad software is not working. All the supported drivers provided by Lenovo for windows 8 are fake and none of them are working. I even tried to search for drivers for graphic card from AMD website but unable to find any suitable drivers.
And to my surprise when i called lenovo technical support for help, the representative told that no such upgradation is possible for older system, but in Lenovo wesite it is clearly mentioned that upgradion is possible and they are provinding windows 8 drivers for this model which does not works at all :-(
Kindly some one suggest some workaround for this issue.
Solved!
Go to Solution.

I had the same problems with the Cypress driver after upgrading to Windows. Based on I did I downloaded the Windows 8 driver for the Ideapad U300s and it works GREAT. There were no compatibility issues, shows up in Device Manager etc. It also has and icon on the task bar that responds to the F6 key for disabling. Best yet this driver has a Palm Rejection tab. I set it for heavy and no wild pointer movements so I find I now keep the trackpad enabled. NOTE: the file name of the driver I downloaded and installed is: Ogt102w8. Hope this helps you and can't figure out why Lenovo has a driver listed for the U400 that does not work while this driver works great.

List of solutions for airplay icon missing in iTunes 11 (windows)

It seems like there are a lot of problems out there with airplay and iTunes 11. I think it would be great if Apple or someone were to make some sort of diagnostic tool for airplay.
I am starting this thread in an attempt to collect some of the various solutions to the airplay problems. Hopefully, other members of the community will add other solutions that they are aware of.
Problem: Can't find the airplay icon in iTunes 11 for windows
1) make sure you are looking in the right place. The icon will appear to the right of the volume slider in the normal iTunes view. If iTunes can't find any airplay devices, this icon will not be present and the area will just be blank.
2) For me (iTunes 11.0.5.5), I did some system work in Windows 8 64-bit, and installed AdAware, and uninstalled it. I think this reset my firewall settings. The airplay icon was missing from iTunes but I was able to do airplay from my iPad over the network. I searched the start menu for "firewall", started "Windows Firewall with Advanced Security", and in the Inbound Rules list I saw that I had 5 entries that started with "Airport". 2 of them were disabled. I double clicked on each disabled rule, and changed the action from "Block the connection" to "Allow the connection". After hitting ok and doing this for both blocked rules, I restarted iTunes and the airplay icon appeared and everything works fine.
3) A popular solution which has worked for me in the past has been to switch the program to miniplayer view. There you will hopefully see an airplay icon. Some people say you should select each of the entries in the airplay list here in order to get them to "stick." When you switch back to normal view, the airplay icon should remain visible.
4) I have seen someone update their dd wrt (open source based) router firmware and had the problem go away.
5) Some have had luck unplugging their airplay device (ie: receiver) for a few minutes and then plugging it back in.
Please add to this list if you can!

Windows 7 64bit
iTunes 11.1.2.32
Apple TV (New Shape) / Airport Express 3rd Gen.
I've had the issue of no Airplay button for the past few weeks. Strangely, it appeared randomly, but never stuck around for too long before disappearing. However, from reading this thread i uninstalled my wireless driver, and reinstalled from a generic windows search, and also installed Apple's Bonjour service (did this one after the other) and restarted my machine. All seems fine now, and the airplay button is there.
Thank you all so much for your inputs in helping get a resolution. I hope this works for everyone else with the issue.
Dan

Nokia C3 Wifi Icon disappear after connected

I am using C3 around two months but I never found any bugs. yesterday when I was trying to connect my wifi connection to the phone it was not working. The wifi connection is okay and the wifi I am using on laptop, it is running fine. The problem is when I connect the wifi connection; the icon of wifi at the upper side of screen appear and instantly disapear after one second. I tried to find the solution online but the problem I faced is something strange and I didn't find any relevant answer. Pelase help me to solve the problem.
Solved!
Go to Solution.

Hello.
Yesterday I bought my new Nokia C3-00:
I have the following problem:
1.- In my own home I've a Huawei Modem, The connection is perfect, but at my work I've a Linksys or Dlink Router the problem is that when I tried connect at my work the C3-00 is rebooted, I dunno what happend my cell is really new the software description is as follow:
C3-00
V 08.63
25-03-11
RM-614
(c) Nokia
Variant: 00.00
No virtual variant
Language:
V 08.63
25-03-11
RM-614
(c) Nokia
C5
Please I need that my cellphone working in all places that I'm stay, because is a really problem I spend between 8 and 10 hour a day here and I bought because I don't want pay a data plan.
Thanks for your help.
Best regards.
Richard S.

Icons disapear after fullscreen MSDOS window

Similar Messages

Maybe you are looking for