Icons for the Reports missing in Workspace after applying patches
Hello Gurus,
I have installed 11.1.2.2 on one of my VM's and then applied the 11.1.2.2.300 patch on it.
I have followed the Read Me for all the patches before applying them.
After applying the patches however the icons for the Reports in workspace
[IMAGE ON THE FOLLOWING LINK]
http://i45.tinypic.com/29f6mc0.png
I have reconfigured web server at the end but that did not help. Any help will be highly appreciated.
Thanks
HyperionEPM.
Hello Nick,
Yes all the components show green and I can access the reports without any issues. Its just the icon that does not show up.
I will check the logs you have mentioned to see if there are any exceptions in them.
But the issues started up after applying the patches for 11.1.2.2.
I have checked the location path mentioned in Weblogic.xml in raframework.war file and the path points to the correct folder location where the folders mt and mt_thumbnails are located.
Is the any other way out?
Should I delete the contents inside the tmp folder located in RAFramework0
or
Can reconfigurin Reporting and Analysis framework services help in resolving the issue?
Please let me know.
Thanks.
hyperionEPM
Similar Messages
-
PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12
Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report. -
My bookmarks, on a HP Pavilion dv-7-2273cl notebook, are saved yet the page icon is still displayed after using the bookmark instead of the actual icon for the website. I have followed the directions for "Favicons do not display" without any success. This problem is not experienced on my much older Gateway desktop.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file -
Hello,
I have filed a bugreport, but I am curious if anybody else has noticed this.
Summary:
Icon that was displaying progress of installation stays on screen next to normal icon and it is impossible to delete it or start the app with it.
Steps to Reproduce:
1. Full factory reset of iPhone with iOS 7.0.2
2. Open web page with link for OTA installation.
3. After install is finished there are two icons for the app.
Expected Results:
Icon that was displaying the progress should disappear after installation.
Actual Results:
Icon that was displaying the progress stays on screen is not usable and cannot be deleted.
Version:
7.0.2
Notes:
Configuration:
Server used to serve the page with installation files is "Server" app on MacBook Pro with Mountain Lion.
The same happens if other servers are used; Ubuntu 12.04 LTS.Hello,
I have the same problem!
Any idea?
Thanks. -
Hi everyone! I turned on my computer the other day and the icon for Safari was missing from my dock. I looked in the applications folder and it is no longer there. Does anyone know how I can get safari if I have no internet search engine? I
Safari 5.0.6 for Leopard can be downloaded from here:
http://support.apple.com/kb/DL1422
Does anyone know how I can get safari if I have no internet search engine?
How did you post here? -
For my game purchase cannot be success .. After I click on the icon for the purchase they will show me contact I-tunes support for complete the transaction ....for I have already contact AppleCare for assist.... And they told me is the server system down
Kindly get back to me ASAP!
Thanks.Jay cole Ong wrote:
After I click on the icon for the purchase they will show me contact I-tunes support for complete the transaction ....
To Contact iTunes Support...
Use this Link > Apple Support iTunes Store Contact -
As I said, the other day I had downloaded the latest version of Firefox and after doing so none of the icons for the different websites that normally go to are no longer there. Websites such as MSNBC, MSN, Most visited, that entire strip is no longer visible. I tired resetting Firefox and still nothing. Can anyone tell me how to get them to appear again? It's a hassle every time that I want to go to one of those sites I have to type it in the search bar, instead of just clicking on it as I did before. Please keep in mind if you answer, that I'm still learning about these things called computers and not very well versed in some of the things that you experts know:) Thanks
On Windows XP Firefox shows the menu bar by default and not the orange Firefox menu button that is shown when the menu bar is hidden.<br />
The menu bar is the toolbar at the top that shows menu items like File, Edit, View, History, Bookmarks, Tools, Help.<br />
You can press the F10 key or tap the Alt key to bring up the "Menu Bar" temporarily in case this bar is hidden (View > Toolbars or Firefox > Options).
The Navigation Toolbar shows the Back and forward button and the input field where you type the address of a site that you want to visit (aka location bar) and also has a search bar where you can type items that you want to look up with a search engine (Google).
See also:
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
*https://support.mozilla.org/kb/Menu+bar+is+missing
*https://support.mozilla.org/kb/Browsing+basics
*https://support.mozilla.org/kb/Tabbed+browsing
You can attach a screenshot in case you still have problems with the toolbars to show what you want to change.
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot. -
Cannot load the report on PDF format after running report
Hi,
I try to use Web.show_document to run the report thru form. After that, the PDF file cannot be shown on browser (IE5.0) but the PDF file is generated successful and if use Acrobat to open it, it work.
An error as 'An error occurred trying to load this document'. (The Acrobat reader is loaded)
Thanks for your help in advance.
nullHello,
I have found a similar problem, I think the problem my be with your acrobat settings.
On Acrobat 5. open an existing pdf file. Then on the menu go to Edit\Preferences\General. => A new screen should pop-up, click on 'Options' on the left hand side, and then check out your WEB OPTIONS. I tend to untick the 'Display PDF in Browser' and leave the others ticked.
I hope this helps. -
Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
VijayHi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar -
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
Display the total number of rows for the report in OBIEE 11g
Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacneCheck this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful -
Parameter REPORT for the Report Web item in the Web template is empty or mi
Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchXAs DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX -
How to get the spool id or how to create a spool id for the report .
hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.Hi Raghu,
Execute this program.
REPORT ZTEST_3318 .
tables: usr01.
perform send_report_to_spool.
*& Form send_report_to_spool
text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
wf_listname type char12,
wf_listtext like PRI_PARAMS-PRTXT,
wf_copies type i,
wf_days type i,
wf_PARAMS LIKE PRI_PARAMS, " achieving file PRI_PARAMS.
wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to wf_listname .
move: 'AP interface' to wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
EXPORTING
destination = loc_dest
copies = 1
list_name = wf_listname
list_text = wf_listtext
immediately = ' '
release = ' '
new_list_id = 'X'
expiration = 1
line_size = 200
line_count = 65
layout = 'X_65_200'
sap_cover_page = 'X'
receiver = 'SAP*'
department = ''
no_dialog = 'X'
IMPORTING
out_parameters = wf_params
valid = wf_valid.
if wf_valid <> space.
new-page print on parameters wf_params no dialog.
perform write_summary .
new-page print off.
endif .
endform. "send_report_to_spool
*& Form write_summary
text
--> p1 text
<-- p2 text
FORM write_summary .
data: begin of itab occurs 0,
matnr type matnr,
end of itab.
select matnr
from mara
into table itab
up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM. " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point -
I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?
If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G -
Documentaion for the report in the ALV display
Hi
I am using the function module 'REUSE_ALV_LIST_DISPLAY
' to display the list. I want some options which can display the documentation of the report after ALV displays the list.
Now i am using the documentation (se38) for the report which we can see pressing a button 'i' on the selection screen.
RameshHi Ramesh,
i use it like this:
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = 'MAIN'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_VARIANT = VARIANT
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORT
IT_FILTER = FILTER
I_SAVE = 'A'
IT_EVENTS = EVENTS
IT_EVENT_EXIT = EVENT_EXIT
IS_PRINT = PRINT
I_TABNAME_HEADER = 'HEADER'
I_TABNAME_ITEM = 'BESTAND'
IS_KEYINFO = KEYINFO
TABLES
T_OUTTAB_HEADER = HEADER
T_OUTTAB_ITEM = BESTAND
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
And this:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
aktueller Satz beider Tabellen lesen, da hierarchisch
READ TABLE HEADER INDEX RS_SELFIELD-TABINDEX.
READ TABLE BESTAND INDEX RS_SELFIELD-TABINDEX.
IF R_UCOMM EQ '&IC1' AND RS_SELFIELD-TABNAME = 'HEADER'.
IF RS_SELFIELD-FIELDNAME = 'QMNUM'.
PERFORM IW53 USING HEADER-QMNUM.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'AUFNR' AND HEADER-AUFNR <> SPACE.
PERFORM CS_AUFTRAG USING HEADER-AUFNR.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'EQUNR'.
PERFORM PM_HIER USING HEADER-EQUNR.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
PERFORM MM03 USING HEADER-MATNR.
ENDIF.
IF RS_SELFIELD-FIELDNAME = 'SERIALNR'.
PERFORM IQ03 USING HEADER-MATNR HEADER-SERIALNR.
ENDIF.
ELSEIF R_UCOMM = '&IC1' AND RS_SELFIELD-TABNAME = 'BESTAND'.
IF RS_SELFIELD-FIELDNAME = 'OTGRP'.
PERFORM EXCEL_OBJEKT.
ENDIF.
ELSEIF R_UCOMM = 'REFR'.
Ausgabe neu einlesen
RS_SELFIELD-REFRESH = 'X'.
PERFORM DATEN_EINLESEN.
Programmdokumentation.
ELSEIF R_UCOMM = 'DOKU'.
CALL FUNCTION 'DSYS_SHOW_FOR_F1HELP'
EXPORTING
DOKCLASS = 'RE'
DOKNAME = PROGNAME
SHORT_TEXT = 'X'
EXCEPTIONS
CLASS_UNKNOWN = 1
OBJECT_NOT_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I010 WITH 'Keine Dokumentation vorhanden!'.
ENDIF.
ELSEIF R_UCOMM = 'GRAPH'.
PERFORM GRAPHIK.
ELSE.
MESSAGE I010 WITH 'Bitte markieren sie eine gültige Tabellenzeile!'.
ENDIF.
ENDFORM.
And it works in the Output-List correct.
Regards, Dieter
Maybe you are looking for
-
Good mail going to Junk folder -- even Apple mail
I know there are other threads on this, but no one seems to have a resolve for it. Mac OS X 10.6.8 Just got my computer repaired at Apple, new harddrive, new video card. So it's starting anew. However, even my MacBookAir is putting my GOOD MAIL in m
-
On my desktop PC I have JDevelop9i RC, which reports its OC4J version as Oracle9iAS (2.0.0.0) Containers for J2EE. On my server PC I have the developer's preview of OC4J Version 2 as downloaded from the Oracle site, which reports its version as Oracl
-
How do know that the battery is fully charged on ios 7
How do know that the battery is fully charged on ios 7
-
Why can't i open iPhoto classic
why can't i open iPhoto classic
-
Hey everyone, I am trying to implement my own BigInt class. However I have absolutely no clue how to store them. So I use an array or linked list or any thing else. Can someone give a hint. Really Appreciate!