Icons have black&white stripes - Navigationpanel

HI there,
Since a few days my icons at the bottom of my screen (desktop) where all the shortcuts have white/black strips and don't look how the should anymore.
I have restarted my Mac already, without any results.
Also of course looked up on the internet, but it's hard to typ exactly how it looks like.
If anyone has any suggestions, they're welcome.
Untill then, thanks for your time.
Regards,
Bjorn

Problem found! I was way off base with the humidity thing. If you go back up one level in this discussion chain to "Displays", you'll see the second item there, a purple highlighted thing called, "iMac G5 Repair Extension Program for Video and Power Issues". It describes our symptoms, and references some serial number ranges, which mine falls into. So, I took my machine to my local Apple store, where the service tech opened it up, and we saw several capacitors on the main board that were bulging and leaking their inner guts. So, it's a component failure, and Apple will cover it, even if your warranty has run out.
Unfortunately, they have to replace the whole mid plane, and supplies are running a couple of week out. But anyway, the problem is being addressed.

Similar Messages

Black &white stripes on the screen all the time

Hi, I have iphone 5 white 64gb A1429, and beginning using February, and today(23.06.2013), in the morning, I saw on my iphone black & white strips on the screen, all the time in start, work, shut down, but with all sound(ringtone, sound of unlock). I created back up iphone, and restored it, without recovery and it’s problem saved. What I can doing? I have warranty, but on body have chipped.
I'm sorry for my English

Hello Jean
Try out the steps in the article below to troubleshoot your iPad to get passed the screen that you are seeing.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
Regards,
-Norm G

Some of my desktop icons have turned white

Some of my desktop icons(.docx and .json files) have turned white. They open alright, but the icons have turned white. I have Windows 8.1 OS. Please help me out.

Hi,
This might be caused by service conflict, I suggest to perform a clean boot in this way:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.
2.Type msconfig in the search box, and then tap or click msconfig.
3.On the Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration dialog box, tap or click OK, and then restart the computer.
Details as below:
http://support.microsoft.com/kb/929135
Regards
Wade Liu
TechNet Community Support

Most of my icons have turned white after I upgraded the operating system

All of the links on my ipad have turned white after I upgraded to 8.1.2. Is there a way of fixing this?

Try restore from iTunes or iCloud backup.

Why have the iworks icons developed a white no entry sign over them?

The three iwork application icons have got white no entry signs over them, the applications all open OK. What is going on?

I would do a search on your Mac for any orphaned files left by this application, and delete any files found, especially .plist files.
Then run the two main disk repair routines:
1 - Applications Disc Utility > repair permissions
2 - shut down your Mac and restart with the shift key pressed until the grey screen appears
the Mac will start to repair let it do this, it can take 5 to 20 mins
when the desktop appears reboot

Convert color images to black&white bitmaps

Hi,
I have black&white scans of public domain books (image format). I use an OCR software to convert them to indexable PDFs (image+text format). However, the OCRed PDFs are insanely big: a 27 MB scanned PDF leads to an indexable PDF of 728 MB! And unfortunately, my OCR software doesn't have output settings, so I have to find a way to compress the files using Adobe Acrobat 9 Pro.
Using Advanced Options > Optimization does reduce the file size, but not significantly. The problem seems to be that my OCR software converts the black&white scans to color images, and encodes them as such inside the PDF. So I need a way to set the image modes back to black&white. I tried using the Advanced Options > Preflight dialog, and selecting "Convert to black&white". However, the resulting PDFs stay about the same size! It seems that "Convert to black&white" converts the images to grayscale, instead of to bitmap.
Any help would be appreciated!

I mentioned "bitmaps", because when I open the original PDF and right-click a random page and select "Modify image..." and open the image in Photoshop, the mode is set to "Bitmap mode": meaning 1-bit mode, containing either black or white pixels. However, when I do "Modify image..." for the OCRed PDF, the mode is set to "RGB Color Mode". I think this explains, in part, the huge size of the OCRed PDF.
Maybe this table will make it more clear:
Original PDF (Bitmap Mode, 132 dpi)
Size: 27 MB
OCRed PDF (RGB Color Mode, 300 dpi)
Size: 728 MB
Now, from the table above, it's clear that I have to reduce the image resolution. So, using the Acrobat's PDF optimizer, I tried the following settings:
Optimized OCRed PDF: Try 1 (Downsample to 132 dpi, JPEG compression)
Size: 733 MB
Optimized OCRed PDF: Try 2 (Downsample to 132 dpi, ZIP compression)
Size: 449 MB
But 449 MB is still huge for a single book. And I don't want to reduce the resolution under 132 dpi, because I will loose quality. Clearly, if the original document is just 27 MB, I should be able to squeeze the OCRed document too. But I don't know how.

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

[SOLVED] xfce+slim, suspend to RAM causes black and white strips

I recently installed a fresh copy of Arch. When I click the "suspend to RAM" xfce button the screen turns off as it should, but when I try to resume I see 5 columns of black and white stripes (like a flattened checkerboard ). Alternatively when I click the "suspend to disk" (hibernate) button the screen turns black but the backlight is still on, the only way to get out of this state is to do a force shutdown with the button.
I don't know if this is just an xfce problem, or if slim is also part of the problem, but it doesn't hurt to let you guys know about that as well.
Reading about this problem somewhere else as a probably graphics driver issue, here's my graphics card:
NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
and I installed the Nvidia nouveau driver from here. I didn't see anything on that page about this kind of issue.
I also tried to add "ck-launch-session dbus-launch" to my .xinitrc file, I knew it probably wasn't the solution but I wanted to try anyways. didn't work.
I also have 2 gigs of RAM and 3 gigs in swap partition.
What do you guys think?
Last edited by Zonqt (2013-01-12 02:37:59)

I have a slight newbie question that's related to my problem: after installing pm-utils am I supposed to have a file /etc/pm/config.d/modules? I reread the docs on suspend and standby here and the instructions are implying I should already have such a file, (since they say to modify it rather than create it), but I've installed and reinstalled the pm-utils and don't have any file there.
It's kind of important too, since i'm thinking I should put my graphics driver as one of those suspended modules...
Edit: one more interesting tid bit, when I use "pm-suspend" in the tty command line (by disabling the slim service and never going to xfce) I suspend fine. I need to have root privileges but I can just use sudo. (this is another reason why it could be a graphics card issue or I guess a privileges issue, hmm)
Edit2: I just tried to login as root from slim and hitting the suspend button, but got the same issue. So it's likely not a privileges issue. Strange.
Last edited by Zonqt (2013-01-11 17:10:49)

My iPod displays black & white battery charge icon and sad iPod face. help!

I plugged my iPod into an older iMac; it froze and had to be restarted.
I restarted it and started listening on shuffle.
It would skip through all of my songs without me pressing any buttons.
I restarted again and it worked fine.
I came home and plugged it into my 10.3.9 iMac and the tracks started skiping and barely playing on iTunes.
I tried to eject it, but it wouldn't...so I unplugged it.
I then restarted it, but after the silver-on-black iMac icon came up, the sad iPod face showed.
So I pluged it back into the computer. It spontaniously restarted when I tried all of the steps of restarting and reinstalling.
Then it just displays a black& white old battery charge icon with a thunder bolt that flickers on the screen now and then.
And continues to restart itself with first the apple icon turning into the sad ipod face and then into the battery charge icon.
I really do not want to restore my iPod. I am hoping to keep my files but at this point, my future is bleak.
This happened last night. They said it might just be my battery so I kept it plugged in for about 10 hours. Nothing.
What can I do?
Please, please help.

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

HELP!! MY IPOD SCREEN DIMMED WITH WHITE STRIPES AND BLACK BACKGROUND

im wake up this morning and find out that my ipod got boot loop, it's stuck in apple logo. i try to connect it to itunes and reset it. its work, i can hear charging sounds, and unlock sounds. and also im trying to test camera and seems it worked (i can hear camera sounds) and after taking 1 picture, the camera show up but with these stripes, but i cant access picture library. but when im looking at the screen, i just see black screen with dim white stripes in the middle. i was thinking if my screen just broke or something. but the apple logo appear good without any scratch or stripes.
Here's the picture
these stripe dim alternately. i only can see these two stripe
Some one please help me about this problem. i have no idea how to fix this. sorry for my bad english

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

White stripe on black printing OfficePro8500

Hi,
I was printing my greetings cards, and an white stripe appears on the black printing.
I Think that the printer have to be re calibrate, but how to do it.
Thanks and happy new year
Hubertus

It shouldn't be normal but it does happen.
I have to say that I do have a slightly brighter band across the top of the screen myself although it is even all the way across and is less than a few pixels in size. Not to mention it's lessening as time goes on. Fortunately it doesn't bother me at all as it's masked by the menu bar.
If it truly concerns you take it into a store for them to look at it else contact AppleCare.

Black and white stripes? Help!

Hello!
I confess I'm a PC user (with plans to get a Mac in the near future, if that redeems me). Therefore I'm not especially familiar with Mac and its operating system, and when a problem arises I'm pretty helpless. I work in a technology lab at my school, and one of our Macs is encountering a problem.
The computer is perpetually displaying black and white horizontal stripes, with a spattering of multicolored pixels all over. I've tried turning the computer off and back on again (because that's about the depth of my knowledge of fixing a problem on Macs), but the computer doesn't even seem to try to boot; almost immediately after pressing the power button, I'm greeted with these hostile little black and white stripes.
I've searched these forums trying to find a solution, but have been unable to find anything. Any help or suggestions would be sincerely appreciated!
Thanks! =)

To The Apple Discussion Boards!
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
In the meantime try the following:
System Preferences>Display>Color
Click on the purple button with the black ? mark in the middle. It's located at the bottom right hand corner.
The help window will pop up. At the very bottom of the page click on the Color Sync Utility link.
Profile First Aid window should pop up. Follow the instructions & run the test.

A white stripe appears on the black printed by my OfficePro8500 please help

I was printing my Christmas card, and a white stripe appears on the black printed by my OfficePro8500, more that I print bigger will be the stripe.
On my old Epson (forgett this brand) it was a problem of calibration, But I don't now how to correct this problem on my OfficePro
Thanks for your help.
&Happy New Year
Hubert

Welcome to Apple Discussions
You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
Also remove any attached peripherals.
Reboot in Repair mode (command-R at start) and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
You must have more than enough (not just enough) empty (free) disk space for the update.

Black spot and white stripe across screen

Okay well it's my brothers ipod, and I have no idea what the heck he did to it. But he left it on his dresser and woke up with the black spot and white stripe across the screen. After reading one of the posts, is it possibily moisture or water? But I have no idea how the black blotch thingy got there. Any ideas on what it is? And how I can fix it?

Hi,
Is this the link you are looking for?
http://www.apple.com/support/ipod/service/
Regards,
Colin R.

I have a macbook latest update & am trying to install flash player 7 will not accept password & I have triesd both administrator password & adobe password & "ok" keeps jumping w/o any message other than hint: black & white" I'm confused & frustrated.

I am a macbook user latest update & cannot get beyond the password - have used Adobe password & administrator password but the "ok" keeps jumping - hint: says "black & white" Very frustrating.

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240

Icons have black&white stripes - Navigationpanel

Similar Messages

Maybe you are looking for