Icons in Hierarchy structure

Hi all
I have a function module for getting Organizations from the database and display them in the form of a tree.
The problem is that, in the organization hierarchy the icon for the child id( when no org underneath) should be different from the icon for the child-id's which have org underneath.
Here in my tree the child-id which does not have any org underneath is showing the same icon as if there are orgs underneath
any help regarding this.
hope u got it
regards
Paul.

Set the status of the child id( when no org underneath) to 'final' this would put a different icon.
Regards
Raja
for more info check out this weblog.
/people/durairaj.athavanraja/blog/2004/11/21/bsphow-to-build-performance-efficient-dynamic-htmlbtree

Similar Messages

Org unit Hierarchy structure between two Key date s

Hello Friends,
We have an issue with displaying HR Org unit hierarchy structure between two calendar months.
The BI Report has a selection parameter to select Org unit hierarchy , Calendar month From and Calendar month To
The BI Report is to display the no.of sick absence days for employees in a chosen Org unit hier.
Employee A had a sick absence of 5 days in the month 04.2011 in the Org unit X . The same employee had a sick absence of 4 days in 05.2011.The Org unit X then delimit in 05.2011 , the Org unit X is no longer in Org structure from 05.2011.
When we run the report for 04.2011 to 04.2011 , the employee A is showing absence under Correct Org unit ie X with correct Org structure .
When we run the Report for 05.2011 to 05.2011 , the employee A is showing absence under hierarchy Org unit Not assigned which is OK .
But the issue is when we run the Report from 04.2011 to 05.2011 , The employee A absence days 9 (5 +4 ) showing under Not assigned Org unit hierarchy structure which is the latest Org unit .
When I deactivate the Org unit hierarchy and choose tech name of Org unit , It is showing correct Org unit key
But The user would like to see 5 days under org unit X and 4 days under Not assigned with Correct Org unit hier structure when we run the Report from 04.2011 to 05..2011 .
We have a user Exit variable for the Key date in the Bex Report which seems to be taking only one date at any time .
Is there any way to get the correct figures under Org unit hier structure where employee had absence in when we put range of calendar months on a selection screen ?
Any advice appreciated.
Thanks.

Hi
Yes, we can display the same by using time dependent hierachy's i.e. your org is converted to time dependent so that respective employee shows with respective of time.
Regards
Jagadeesh.M

Org unit Hierarchy structure at Key date

Hello Friends,
We have an issue with displaying HR Org unit hierarchy structure between two calendar months.
The BI Report has a selection parameter to select Org unit hierarchy , Calendar month From and Calendar month To
The BI Report is to display the no.of sick absence days for employees in a chosen Org unit hier.
Employee A had a sick absence of 5 days in the month 04.2011 in the Org unit X . The same employee had a sick absence of 4 days in 05.2011.The Org unit X then delimit in 05.2011 , the Org unit X is no longer in Org structure from 05.2011.
When we run the report for 04.2011 to 04.2011 , the employee A is showing absence   under Correct Org unit ie X with correct Org structure .
When we run the Report for 05.2011 to 05.2011 , the employee A is showing absence under hierarchy Org unit Not assigned which is OK .
But the issue is when we run the Report from 04.2011 to 05.2011 , The employee A absence days 9 (5 +4 ) showing under Not assigned Org unit hierarchy structure which is the latest Org unit .
When I deactivate the Org unit hierarchy and choose tech name of Org unit , It is showing correct Org unit key
But The user would like to see 5 days under org unit X and 4 days under Not assigned with Correct Org unit hier structure when we run the Report from 04.2011 to 05..2011 .
We have a user Exit variable for the Key date in the Bex Report which seems to be taking only one date at any time .
Is there any way to get the correct figures under Org unit hier structure where employee had absence in when we put range of calendar months on a selection screen ?
Any advice appreciated.
Thanks.

Hi,
You can try adding two more attributes to Org Unit as "Calender month from" and "Calender month to".
In these attributes maintain the validity period for the corresponding master data.
For example, in your case you can maintain the master data as:
Employee | Org Unit | Calender month from |Calender month to | sick absence
A | X | 4.2011| 4.2011 | 5 days
A |    | 5.2011 | 05.2011 | 4 days
And in report use variables for Calender month from" and "Calender month to".
Hence, when user executes the report with selection as:
Calender month from" = 04.2011
"Calender month to"    = 05.2011
The data will be read from master data based on these selections along with key date and report will show output as expected.
Employee | Org Unit | Calender month from |Calender month to | sick absence
A | X | 4.2011| 4.2011 | 5 days
A |    | 5.2011 | 05.2011 | 4 days
Hope this works for you.
Regards,
Geetanjali

Product : Errors in attribute hierarchy structure SAP BCA 000164

Hi All ,
When ever i create /Display /Change Product in
Financial Supply Chain Management --> In House Cash > Master Data>Product Definition--> Product --> Create /Change/Display
system through below mentioned error .
I tryed to resolve problem as per below mentioned program through se38 , but still getting same error
Errors in attribute hierarchy structure SAP BCA 000164
Message no. FIPR217
System Response
An error was found in the attribute hierarchy.
In some cases, it is not possible to display the attribute hierarchy without having to correct the errors first.
Procedure
It is recommended that you run the FIPR_CLEAN_ATTRIBUTES (by using transaction SE38). This report can recognize errors, and it attempts to correct them automatically.
Caution: This report can change your table entries permanently.
Once this report has run, you need to check the hierarchy structure, and make any necessary changes.
Regards
Prakash Sharma

Hi,
the realignment (KEND) does not change the line item tables (CE1***, CE2***), thats why they remain unchanged.
The line items in CE1**** can not be changed. If you really want to have new line items (with the new prod. hierarchy) try in test-client if the use of report RKECADL1 and the new transfer to CO-PA for the deleted line items (KE4S, KE4SFI,...) can help you (SAPNET-note 69370 for details).
CE2**** + SQL-error: As per now, I don't have an idea how to deal with that cases.
best regards, Christian

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

How to include the not assigned nodes in Hierarchy structure

Hi Experts,
I am running a report which has got Hierarchy variable type. After execution of the query some of the nodes appear always under "not assigned".
Please let me know is it possible to include these not assigned node under hierarchy structure.If so how to do that?
Regards
Kumar

Hi Subbiah.
You can also supress the "not assigned" nodes in the hierarchy maintanence by choosing: Hierarchy attributes -> Supress unassigned nodes.
Hope it helps.
BR
Stefan

How to create Formulas in the hierarchy structure

Hi,
Is it possible to create formula with in the hierarchy structure, so that the both hierarchy drill down and the created formulas can be displayed at the query output. Please give the valued suggestions.
Thanks
VEERU.

Hello
You have in this case to create a structure and select the node concerned in your hierarchy.
Then create a new formula based on your previous selection for example.
Rgds

In query designer, an hierarchy(structure) duplicating lines in level 2.

Here we are at version 7.0 - SP 10, I have created a structure hierarchy in BEX, and when I execute this query the result is ok ... until I tried to closed or open the second level.
At first, it doesn't close, and the worst if I tried to open it's
duplicating the lines of the second level.
In query designer, creating an hierarchy(structure) something like this:
> total division 1
...> division 1.1
...> division 1.2
> total division 2
...> division 2.1
...> division 2.2
and after the execution, if I tried to close or open the level of division 2 the result will duplicates the lines division 2.1 and division 2.2. the result is like this:
> total division 1
...> division 1.1
...> division 1.2
> total division 2
...> division 2.1
...> division 2.2
<b>...> division 2.1
...> division 2.2</b>
The stange is in excel it works normaly.
Best regards,
Silvio Meurer

Hi,
An Heirarchy is always an addition of the below nodes. hence. WBS 1 = WBS 1.1 + WBS 1.2. since youre looking at durations. it will add up 7+9 instead of looking at earliest start and latest end dates.
dont know if itll work but a suggestion would be to get the start date and end date for WBS 1 and then do the calculation for duration in a formula in query designer.
regards,
Dilanke

Error in the hierarchy structure - Data Load Failure

Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.

hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies

Time dependent hierarchy structure in SEM-BPS

I want to use a time dependent hierarchy structure in sem BPS to make combination chek and proposal in a layout.
I have manage a relation of type hierarchy (based on this hierarchy) in the characteristic relationship tab page of my planning area.
I open my layout to make entries in the future (next fiscal year) but the system doesn't propose me the datas valide for the next fiscal year in my hierarchy but the datas validate today.
There is a key date in the master data tab page of the planning area but it seems to have only effects on attributes with validity dates but not with hierarchy with time dependent hierarchy structure.
Thanks for your help.

Hi,
The key data that you enter in the planning area is only for time dependent characteristics and attributes. For the hierarchies in the characteristic relationships the current data is used.
If you still want to use a time dependent hierarchy for modeling the characteristic relationships you could use a characteristic relationship type exit. In the exit you can read the hierarchy with the proper date.
Best regards,
Gerd Schoeffl
SAPNetWeaver RIG BI EMEA

Creation of hierarchy structure

Hi all,
I need help bulding a hierarchy structure which is time dependent (hierarchy structure time dependent). I want to know if the hierarchy structure only depends on the NodeID and ParentID or if the time information is (date from and date to) is also taken in concern?
I made a test and it seems that the hierarchy structure only depends on the node id and the parent id information.
Please confirm.
Points will be assigned.
Cheers,
Marco

Hi guys,
here is an example from the data that is passed to the transfer structure:
NODEID
INFOOBJECT
NODENAME
PARENTID
DATETO
DATEFROM
TXTSH
TXTMD
TXTLG
1009920
FACILITY
1009920
1
99991231
10000101
1009921
FACILITY
1009921
1009920
20080630
10000101
1009922
FACILITY
1009922
1009921
20080630
10000101
1009925 |FACILITY |1009921 |1009920 |99991231|20080701| | | | |
1009926
FACILITY
1009922
1009921
99991231
20080701
The result in the BW is that
1009920 has the children 1009921 with 1.1 - 30.06.2008 and 1009921 1.7. - end
the children 1009922 are both added to 1009921 1.1 - 30.06.2008!
Correct would be that 1009922 1.7. - end is linked to 1009921 1.7. - end
Regards,
Marco

Hierarchy structure changes

Hi All,
I have one requirement at clent site where hierarchy structure changes i.e. parent child relation switches or changes from one level to another level. For example WBS element hierarchy stucture for project 101014 is:
101014--root
101014-1>101014-1-01>101014-1-01-02-->101014-1-01-02-01
after above hierarchy load to bw there are chances that hierarchy nodes change their positions.
i.e.above hierarchy node 101014-1-01 can be removed from parent(101014-1) and assigned to 101014-2.
In Next load Hierarchy need to realign/restructure according to new hierarchy tree from ECC system. Right now we are BW 7.30. Thanks for you help and gurantee of points.
Regards,
Reddy

Hi Gaurav,
Thanks for quick response, we are running process chain on daily basis which will trigger full load from ECC to BW. I thought the same but when I look below error message I think we need to some how delete hierarchy data and reload with restructed or realigned data. Please find below error details and once again thanks for your help.
Node ID 00001564 has not been included as a sibling node or as a child node
Message no. RH207
Diagnosis
The node with the ID 00001564 and the node name 101014-1-02-03 is not used as a child node (field CHILDID) or a sibling node (field NEXTID) by any node in the hierarchy. The node is also not a root node because the ID of the parent node 00001565 (field PARENTID) is not equal to 0. The node is therefore not linked into the hierarchy. Therefore the node is not connected to the hierarchy.
Procedure
This message is displayed in addition to message RH 242. The node is the root node of a subtree that is not connected to the hierarchy. For further details, see the long text for message RH 242.
4 of a total of 13,846 nodes are not included in the hierarchy
Message no. RH242
Diagnosis
The root nodes are the starting point for moving through the hierarchy. The content of the fields NEXTID and CHILDID is used to move from the current node to its sibling and child nodes.
4 out of a total of 13,846 nodes cannot be reached by moving through the hierarchy in this way. These 4 nodes are not connected to the hierarchy.
System Response
The hierarchy is not consistent and therefore cannot be activated.
Procedure
The cause of the problem is usually incorrect links to sibling nodes (field NEXTID) or child nodes (field CHILDID). An incorrect value often means that an entire subtree (consisting of several nodes) is not included in the hierarchy.
To simplify the search for incorrect links, the system identifies the nodes (from all the not connected nodes) that are not used as sibling nodes or as child nodes. These nodes are usually root nodes of subtrees that are not connected to the hierarchy. You can find these nodes in the RH 207 messages that follow.
Try to localize the problem by using the RH207 messages for help. If the hierarchy is loaded from an SAP source system, you can check whether the extracted data is correct by executing transaction RSA3 in the source system. If necessary, check if the data is modified with a user exit. If the hierarchy is loaded from a file, check the contents of this file. The problem might also be due to an error in the transfer rules or in the transformation.
Thanks
Reddy

Report designer error for hierarchial structure on Columns

Hello,
I have a query with a structure in rows and another one in columns. I also have a 0COMPANY hierarchy Dimension within the Columns.
When I insert the data provider into a report designer report, I receive the following error:
"Query contains a hierarchial structure on Column(s)..."
Has any one encountered this issue before? Is there a note or workaround available?
Thank you.
Sri Yalla

Hi,
the report designer need to have a fixed number of columns. If you have a Hierarchical Structure in the Columns, the number of columns can change. Therefore Report designer does not allow to use this DP in this drill down. You should place the Row structure to the columns and the hier-structure to the rows. then it should work.
best regards,
kai

Creating hierarchy structure in excel

Hi,
Could someone help me in how to create a hierarchy structure in excel like defining
InfoObject X as Node 1
InfoObject Y as Node 2 and etc.
I have the excel file where we can create a structure but i lost that. if someone can send me a template i would really appreciate ur help.
Thanks,
pandu

Hi
If u need to create the structure
Go to the IS datasource
1)click the Heirarchy structute
and u can see the structure that is the right structure u need to have in the Flat file
Check this link also
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
Hope it helps
regards
AK

How to understand the hierarchy structure of 0PLANT io?

how to understand the hierarchy structure of 0PLANT io ?
i can understand the hierarchy structure of PRODUCT io,
well, i hope someone could explain the hierarchy structure of 0PLANT io
thanks.

Hi
You can use following hierarchy tables
RSTHIERNODE - Texts of Non-Postable Hierarchy Nodes
RSEHIERNODE - Master Data: Hierarchy Nodes that Cannot Be Posted To
RSMHIERNODE - Master data: Hierarchy nodes that cannot be posted to
RSHIEDIR - Hierarchy Catalog
RSHIEDIRT - Hierarchy directory texts
RSREQHIER - Data Request hierarchy
RSROLEHIERARCHY - Role hierarchy
In addition to these have a look at K table & I table for 0PLANT.
K table - Hierarchy SID table
I table - Hierarchy structure table
Hope this will help..!!
Thanks,
Vikrant

Icons in Hierarchy structure

Similar Messages

Maybe you are looking for