Icons not appearing correctly on iPod 2G

Anyone know if this is fixable? It's only some icons.... most of them look fine.

Have you tried:
- Reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Syncing with your computer
- Restoring from backup
- Restoring to factory defaults/new iPod

Similar Messages

I just updated my iPod touch to IOS 5.0.1...but after that my iPod touch cannot synchronise with Itunes. the iTunes do detect the iPod and synchronize it but for examples a new song or aplication that i just download does not appear on my iPod...

i just updated my iPod touch 4G to IOS 5.0.1. after that my ipod cannot synchronise with itunes. during connecting to itunes my ipod seem to be synchronised with itunes but the song or application that i just downloaded did not appear in my ipod.

- First try a rset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try restoring from backup

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

Website suddenly not appearing correctly in Firefox under Windows 7

I've had a website running for a couple of years now with no problems, but one of my clients sent me an email saying it's not appearing correctly on her system, Windows 7 runnning Firefox v. 15. I am on a MAC and have looked at the site on 4 different browsers and it looks fine, I also installed Firefox (v. 16) on a PC running Windows 7 and it looks fine there. Near as I recall I haven't made any changes to the site's structure, so I'm stumped. The website is http://www.horizonwings.org. Can anyone help? I've attached a couple of screen captures showing what she sees. Thank you.

I see the same problem as your client in Firefox 16 on Windows 7. To fix the problem, add clear: left to the style for leftColMain
#leftColMain {
    clear: left;     float: left;
    padding: 30px 0 0;
    position: relative;
    width: 210px;

Navigation Drop Down Menu Does Not Appear Correctly with Internet Explorer.

Website was designed with Dreamweaver CS5 on a Mac. The navigation drop down menu does not appear correctly with Internet Explorer. When you mouse over a navigation option that has a drop-down menu, the drop-down portion appears on top of the first level. Hope someone can help me out.Thanks!
http://www.catchaghosttoursofkansas.com

Hi,
and you should then iron out this minor inaccuracy, which I found in your source code, for example here:
<div align="center"><a class="MenuBarItemSubmenu" href="hays.html">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
All your "first" entries have to show a '#", like this:
      <div align="center"><a class="MenuBarItemSubmenu" href="#">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
      </div>
after that you can link to the individual subgroups. See here e.g. (screenshots from my German DW):
Hans-G.

Buttons do not appear correctly in Firefox

My company uses IE 7 as their standard browser within the company. I am developing an extranet application so that the public can access my company's information. Since APEX supports both IE and Firefox, the application needs to appear the same in both versions. Everything looks fine except for the buttons.The buttons in my applications appears correctly in IE 7 but it does not appear correctly in Firefox 3.5.5.
You can access my application via the following link:
https://miniprofile.panynj.gov/pls/apexcfp8/f?p=120:1
Can someone assists please. I will forward you the customized CSS and templates that the application references via e-mail, if needed.
Thanks in advance,
Robert

Hi Robert,
According to FireBug, the following style in the PA_t15WL class is causing the problem:
background-position:0 50%;If you remove this, the button displays ok in FireFox - not sure what effect it has on IE7, though
Andy

Help with indesign epub not appearing correctly on ipad

Can someone please tell me why my epub does not appear correctly when viewed on my ipad? It seems to push like a quarter of my full page image onto the next page. I don't want it to do this! I want it to looks like it does in ibooks on my mac.
See the links to below images that show how it looks on indesign, ibooks and ipad.
https://www.flickr.com/photos/118558552@N02/15536244571"
"https://www.flickr.com/photos/118558552@N02/15352308439"
https://www.flickr.com/photos/118558552@N02/15538941145"
Thankyou for looking, and I hope someone can answer!

Check this thread regarding the same issue and see if some of the suggestions there help you: IMAGES cut off when converting to epub

Horizontal Spry Submenu does not appear correctly in IE

I am building a site in Dreamweaver CS5 and my spry submenus do not appear correctly in IE.   I work on a mac, but have been checking my work on a pc.   I have tried looking through other posts and have made some corrections (I at least got the submenus to appear vertically instead of laterallly in IE) but still have two problems:
   * The submenus are shifted to the right rather than aligning under the menu headings
   * One one menu (Attorneys) the submenus appear above, rather than below, the menu heading
Here is the website and I am really hoping someone can help! I've spent several hours trying to figure this out with no luck.
http://webdesign.protas.org/olg/English/olg%20eng.html

1. Especially IE takes offence to the DOCTYPE declaration not being on the first line
2. There is no end tag for the HEAD section
3. Your use of the Library Item for the menubar is not correct
Please have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwebdesign.protas.org%2Folg%2FEngl ish%2Folg%2520eng.html
Gramps

"Non rectangular objects will not appear correctly when exported using CSS."

I am using Ind CC 2014 exporting a document to a reflowable epub. The document contains an .ai image. The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS." Any suggestions appreciated.

Thanks!
>
"Non rectangular objects will not appear correctly when exported
using CSS."
created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
/InDesign EPUB/ - View the full discussion
<https://forums.adobe.com/message/6886892#6886892>

Websites do not appear correctly.

After about a few hours of being on the internet (continuously or not), web pages will start to not appear correctly. The only way I have found to fix this is to clear the history. (Cookies, cache, etc.) This is only a temporary fix though and I would like to not have to do this every few hours when I'm in the middle of something. I haven't been able to find anything else on this at all besides the temp. fix of clearing the cache.

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT201335 airplay icon not appearing, mountain lion installed and apple tv working with iTunes ???

airplay icon not appearing, mountain lion installed and apple tv 2nd G working good with iTunes ???
i do not understand.

Which MBA do you have? It needs to be Mid 2011 or later for ML mirroring to work.
http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

It's not clear whether you were able to do any backups to this drive at all. If not, it's probably not formatted properly. See #5 in Time Machine - Frequently Asked Questions for instructions.
If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted. Try to repair the backups, per #A5 in Time Machine - Troubleshooting.

Why is the iphone icon not appearing on my itunes when I plug it into my computer?

Why is the iphone icon not appearing on my itunes when I plug it into my computer? I am online, my itunes is up and running, my new phone is plugged in, and for whatever reason the iphone icon that is supposed to appear is not showing up after I plug my phone in.

Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Mc-icons not sized correctly in Internet Explorer

The file icons used by Sun One Web Server 6.1 (/mc-icons) to indicate file types do not display correctly when a directory does not have an index or default file, and the web server automatically creates an index that includes these icons and shows the directory contents. The icons representing the files appear correctly sized in Netscape Navigator 4.7 browser, but appear to shrink beyond visible resolution in Internet Explorere 6.0 browser. Fancy indexing (common) is being used. Platform is Windows 2000 Server, also running SSL3 and ColdFusion 7.0. How can we get the icons to display at a visible size in Internet Explorer? The result appears to the user as if the icon graphics are missing, but they are indeed called correctly by the page and the path to them is set correctly. I have verified that the graphics are OK on the server and are sized correctly when viewed in an image editor.

Are you sure the problem is the size of the icons? Beginning with version 6.0.2900.2190, Microsoft Internet Explorer stopped displaying the Web Server /mc-icons GIFs. This regression was apparently a side effect of Microsoft's attempts to fix IE's handling of malicious image files.
Apart from not using the buggy versions of IE, I'm not aware of a simple fix. I suspect a future Web Server 6.1 service pack will include a work around for the IE bug, but probably not until 6.1SP7.
I've added tweaked icons to my blog at http://blogs.sun.com/elving?entry=directory_listing_icons_and_ie that IE will display properly. You may wish to copy these into your ns-icons directory.

PO Form print out is not appearing correctly

Hi All,
I have an issue in PO print.
I am trying to print the PO with item text. But in print preview the text is appearing and it is not appearing when I take print out.
Could you please help me in resolving the issue.
Thanks & Regards,
DSaya

Hi All,
Thanks for your replay.
We have identified the issue. When the PO is created with reference to PR the TEXT should be adopted (Functional people can explain what is TEXT adoption) then it will create an entry in the table STXH. Once entry is created in the table then data will appear in the Form output as in print preview.
Steps:
1.ME21N- Create Purchase order by reference pf purchase requisition
2.The Item Text from Purchase requisition is copied to purchase order item text
3.Click on the icon given below; this will adopt the text from purchase requisition to purchase order
4.Click on the icon given below; this will adopt the text from purchase requisition to purchase
5.You will get the text adoption message as "Text adopted from PR".
Thanks again.
DSaya

Icons not appearing correctly on iPod 2G

Similar Messages

Maybe you are looking for