Icons not displaying correctly getting text instead.

I have tried all options that I have found on your forum with no luck. I went as far as resting my Firefox to default with no success.
Using MAC 10.8.5
My setting are set up correct - Allow pages to choose their own fonts, instead of my selections above is checked.
I also rest this as well
gfx.downloadable_fonts.enabled
So far no luck I am still getting text instead of the icons.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB

Similar Messages

Website Icons not displaying Correctly on FF8.0

Dear Support,
After upgrading to the latest FF8.0, I noticed that some of the bookmarked websites in my bookmark toolbar don't display their icons correctly.
for e.g.: I have Cisco.com at bookmark toolbar. Instead of displaying Cisco's logo next to the website name, I'm getting an empty dashed square.
Kindly advise
Regards
Michel

The MOST common cause of sites not displaying properly in any browser is the invalid code on the page -
[Invalid] Markup Validation of http://selfhelplegalonline.com/ - W3C Markup Validator
See if you can fix those validation errors or post back here for help.

Indesign CS3 .indd icons not displaying correctly in Windows 7 64 bit.

GDay InDesign Gurus.
Ive just recently moved over to Windows 7 64 bit and have noticed that my InDesign .indd file icons are being displayed as a blank file type instead of the IND icon type. The .indd files open up correctly in InDesign upon double clicking so the issue is more of a convenience one. I have checked that the file association has been set to InDesign which is all ok as the files open up fine just there is no IND icon displayed in the file; my Photoshop and Illustrator files are all fine and display correctly but it would be nice if I could easily see my .indd files.
Ive searched the web for a solution but have not been able to fine one associated to Windows 7 64 bit.
Any help you guys can provide would be highly appreciated.
Thanks guys.
Regards Stuart K

http://forums.adobe.com/message/1319918#1319918
Bob

Yen Symbol Not Displayed Correctly in Text

Hi all,
I am trying to create a text file in the application server using the command "OPEN DATASET IN TEXT MODE", which I am able to do so far. The data to be transferred to the text file contains the Yen Symbol: ¥ or ALT+0165. The symbol is being displayed correctly in SAP, but when I open the text file created my notepad is only displaying a small box or dot:
･45,000;
but when I try to manually type the yen symbol on the notepad I am able to do it correctly! For additional this is the code snippet in question:
LOOP AT i_tag INTO wa_tag.
    ls_tag = wa_tag.
    AT NEW grouping.
      CLEAR v_path.
*--- define and open file path for file group
      CONCATENATE ls_tag-pathextern ls_tag-file INTO v_path.
      OPEN DATASET v_path FOR OUTPUT IN TEXT MODE.
      IF sy-subrc <> 0.
        CLOSE DATASET v_path.
        CLEAR v_path.
      ENDIF.
    ENDAT.
    CHECK NOT v_path IS INITIAL.
    PERFORM:
      prepare_file_data,
      prepare_file_line CHANGING v_line.
    IF NOT v_line IS INITIAL AND wa_tag-tag_menge > 0.
      DO wa_tag-tag_menge TIMES.
        TRANSFER v_line TO v_path.
      ENDDO.
    ENDIF.
    AT END OF grouping.
      CLOSE DATASET v_path.
      CLEAR i_filenames.
      i_filenames-file = ls_tag-file.
      APPEND i_filenames.
    ENDAT.
ENDLOOP.
is there any additional preparation i need to transfer the yen symbol properly? By the way the system is 4.6c.
Thanks in advance!

Before writing to the file change ¥ into in order to translate properly to in the text file.

FileMaker Pro icons not displaying correctly

After updating to Yosemite, all of my FileMaker Pro document icons are displayed as generic icons (juts the outline of a piece of paper). This occurs both in Finder and on the Dock.
Other document icons seem okay. If I do a Get Info on a document, the icon seems okay in the Get Info window.
Does anyone know how to correct this behavior?
Thanks!

Thanks, coreworksnet.
I was also seeing this problem with FM 13. I was able to get around it, but it was a headache. I had to go into each individual DB file and do a Get Info. That dialog shows the icon for the document (which, strangely enough, showed the correct icon). I then copied the icon over from the FM app (which visually did nothing). But once I closed the Get Info dialog, the icon for the DB file was correct.
Repeat a few dozen times for all of my DB files, and it seems okay now.

Icons Not displaying correctly in Bridge 6

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Also some image icon as above shows just the first layer, not added layers. I open the image in cs6 and it is correct. The correct image is saved and working; but the icon does not show the correct image.
Of 30 images I have worked on over the weekend there are only two in the folder that do not show correctly. The files are not bigger/smaller than the correct ones and all of them are psd. Any ideas? Thanks, Bob

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Assuming with Image icons you mean the thumbnails in the content panel and that you are using Bridge CS 6 (which has Bridge version 5)?
The short route to check is selecting one one the problem thumbnails and with right mouse click from the menu choose 'purge cache for selection'.
If this works then go to the menu tools / cache / purge cache for folder and you should be OK.
If not you have to provide more details about computer specs, OS version and exact Bridge version

Brush icon not displaying correctly

Hi folks,
I just installed CS4 on a lovely new Dell notebook with WUXGA display (1920x1200) and am having a problem that I have never seen before. When the brush tip is small (up to 35 px at 100%) I see the entire circle defining it, but as I move into larger and larger tip sizes the circle starts to disappear from the bottom right, becoming just a smaller and smaller circular fragment until it disappears entirely at around 300 px. If I select the center crosshair, this also disappears around 200px (when only a small circular crescent is left), and then reappears at around 400px (minus any trace of the circle).
It is obviously some sort of display issue: if I change the image size the behavior is the same when the circle is the same size onscreen, so it is the display size and not the absolute pixel size which determines it. This happens whether I choose normal or full-size tip.
Has anyone experienced this? It is not only annoying, it is positively serious, since at certain sizes I cannot even tell where or how large the brush is.
Clear type on or off makes no difference. I have not noticed any odd display behavior with any other program.
Any suggestions most welcome.
Toby

This was a very common fault in the early days of CS4.
You need to update to Version 11.0.1 and get the latest video drivers.
You might have to experiment with OpenGL settings in the preferences too.

Fl.* components not displaying correctly, getting error 2007 and 1009. help me please

Hi guys,
I am trying to make my application use Flash components, but I have a problem with displaying them correctly. I've used Flash CS5 to export them into .SWC. In Flex it seems that their graphics doesn't load, and below is a screenshot how it looks with a Button and UILoader. I couldn't find any solution, as I've searched other forums.
And also I've selected all flash components to be included in the .SWC library, but almost half of them is missing when I include the file in Flex. Is maybe some catalog corrupted or is it an issue with Flash CS5? I hope somebody can help please!
I when I try to use the .SWC in in Flash I get this:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at fl.containers::ScrollPane/drawBackground()
at fl.containers::ScrollPane/draw()
at fl.core::UIComponent/callLaterDispatcher()
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/addChildAt()
at fl.controls::BaseButton/drawBackground()
at fl.controls::BaseButton/draw()
at fl.core::UIComponent/drawNow()
at fl.controls::ScrollBar/draw()
at fl.core::UIComponent/callLaterDispatcher()

Hi guys,
I am trying to make my application use Flash components, but I have a problem with displaying them correctly. I've used Flash CS5 to export them into .SWC. In Flex it seems that their graphics doesn't load, and below is a screenshot how it looks with a Button and UILoader. I couldn't find any solution, as I've searched other forums.
And also I've selected all flash components to be included in the .SWC library, but almost half of them is missing when I include the file in Flex. Is maybe some catalog corrupted or is it an issue with Flash CS5? I hope somebody can help please!
I when I try to use the .SWC in in Flash I get this:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at fl.containers::ScrollPane/drawBackground()
at fl.containers::ScrollPane/draw()
at fl.core::UIComponent/callLaterDispatcher()
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/addChildAt()
at fl.controls::BaseButton/drawBackground()
at fl.controls::BaseButton/draw()
at fl.core::UIComponent/drawNow()
at fl.controls::ScrollBar/draw()
at fl.core::UIComponent/callLaterDispatcher()

Text on some pages not displaying correctly since Lion upgrade

Since upgrading to Lion a few days ago, I find that the texg on many web pages does not display correctly. It appears to affect mainly header texts - all I get is a row of the capital letter "A" in boxes. I am running Safari Version 5.1 (7534.48.3) on Lion 10.7 Build 11A511.
Can anyone suggest a fix for this?

Try here > All I see is the letter "a": Apple Support Communities

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Why is the map not displaying correctly on "find my phone" I am getting large grid squares on the map

why is the map not displaying correctly on "find my phone" on my computer. I am getting large grid squares on the map. I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

Welcome to Apple Support Communities
It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

Websites not displayed correctly

Hi,
since i updated to Safari 6.0.2, many websites are not displayed correctly anymore. instead of pictures i see a blue question mark, sometimes the whoe layout is a mess. this concerns multiple websites, alse like facebook or youtube. when i refresh, it mostly orks, so i think it´s not a plugin-issue
Curiously, also in Mail, some Emails are not displayed correctly.
Thank´s for any suggestions or ideas how to solve that.
Christoph

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!

Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">

</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]

Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Icons not displaying correctly getting text instead.

Similar Messages

Maybe you are looking for